Search

Solid-state detectors with a low energy threshold have several applications, including in direct-detection searches of non-relativistic halo dark-matter particles with sub-GeV masses. Moreover, when searching for relativistic or quasi-relativistic beyond-the-Standard-Model particles (i.e., $v/c\gtrsim 0.01$) that have an enhanced cross section for small energy transfers, a comparatively small detector with a low energy threshold may have better sensitivity than a larger detector with a higher energy threshold. In this paper, we provide accurate calculations of the low-energy ionization spectrum from high-velocity particles scattering in a dielectric material. We focus on silicon, although our results can be easily applied to other materials. We consider the full material response, in particular also the excitation of bulk plasmons. We generalize the energy-loss function to relativistic kinematics, and benchmark existing tools used for halo dark-matter scattering against publicly available electron energy-loss spectroscopy data. Compared to calculations of energy loss that are commonly used in the literature, such as the Photo-Absorption-Ionization model or the free-electron model, the inclusion of collective effects shifts the recoil ionization spectrum towards higher energies, typically peaking around 4--6 electron-hole pairs. We apply our results to the three benchmark examples: millicharged particles produced in a beam, neutrinos with a magnetic dipole moment produced in a reactor, and dark-matter particles that are upscattered by cosmic rays or in the Sun. Our results show that the proper inclusion of collective effects typically enhances a detector's sensitivity to these particles, since detector backgrounds, such as dark counts, peak at lower energies., Comment: 26 pages, 9 figures including appendices and references

We present the first results from a dark matter search using six Skipper-CCDs in the SENSEI detector operating at SNOLAB. With an exposure of 534.9 gram-days from well-performing sensors, we select events containing 2 to 10 electron-hole pairs. After aggressively masking images to remove backgrounds, we observe 55 two-electron events, 4 three-electron events, and no events containing 4 to 10 electrons. The two-electron events are consistent with pileup from one-electron events. Among the 4 three-electron events, 2 appear in pixels that are likely impacted by detector defects, although not strongly enough to trigger our "hot-pixel" mask. We use these data to set world-leading constraints on sub-GeV dark matter interacting with electrons and nuclei., Comment: 5 pages, 2 figures, + Supplemental Materials (5 pages, 5 figures) + References

Low-energy Compton scattering is an important background for sub-GeV dark matter direct-detection and other experiments. Current Compton scattering calculations typically rely on assumptions that are not valid in the low-energy region of interest, beneath ~ 50 eV. Here we relate the low-energy Compton scattering differential cross section to the dielectric response of the material. Our new approach can be used for a wide range of materials and includes all-electron, band structure, and collective effects, which can be particularly relevant at low energies. We demonstrate the strength of our approach in several solid-state systems, in particular Si, Ge, GaAs, and SiC, which are relevant for current and proposed experiments searching for dark matter, neutrinos, and millicharged particles., Comment: 5 figures, 9 pages + references

We calculate target-material responses for dark matter--electron scattering at the \textit{ab-initio} all-electron level using atom-centered gaussian basis sets. The all-electron effects enhance the material response at high momentum transfers from dark matter to electrons, $q\gtrsim \mathcal{O}\left({10\ \alpha m_e}\right)$, compared to calculations using conventional plane wave methods, including those used in QEDark; this enhances the expected event rates at energy transfers $E \gtrsim 10$~eV, especially when scattering through heavy mediators. We carefully test a range of systematic uncertainties in the theory calculation, including those arising from the choice of basis set, exchange-correlation functional, number of unit cells in the Bloch sum, $\mathbf{k}$-mesh, and neglect of scatters with very high momentum transfers. We provide state-of-the-art crystal form factors, focusing on silicon and germanium. Our code and results are made publicly available as a new tool, called Quantum Chemistry Dark (``QCDark'')., Comment: 15 pages, plus references and appendices, 12 figures

Millicharged particles appear in several extensions of the Standard Model, but have not yet been detected. These hypothetical particles could be produced by an intense proton beam striking a fixed target. We use data collected in 2020 by the SENSEI experiment in the MINOS cavern at the Fermi National Accelerator Laboratory to search for ultra-relativistic millicharged particles produced in collisions of protons in the NuMI beam with a fixed graphite target. The absence of any ionization events with 3 to 6 electrons in the SENSEI data allow us to place world-leading constraints on millicharged particles for masses between 30 MeV to 380 MeV. This work also demonstrates the potential of utilizing low-threshold detectors to investigate new particles in beam-dump experiments, and motivates a future experiment designed specifically for this purpose., Comment: 7 pages, 5 figures

Oscura is a planned light-dark matter search experiment using Skipper-CCDs with a total active mass of 10 kg. As part of the detector development, the collaboration plans to build the Oscura Integration Test (OIT), an engineering test with 10% of the total mass. Here we discuss the early science opportunities with the OIT to search for millicharged particles (mCPs) using the NuMI beam at Fermilab. mCPs would be produced at low energies through photon-mediated processes from decays of scalar, pseudoscalar, and vector mesons, or direct Drell-Yan productions. Estimates show that the OIT would be a world-leading probe for mCPs in the MeV mass range., Comment: 13 pages, 10 figures

Oscura is a proposed multi-kg skipper-CCD experiment designed for a dark matter (DM) direct detection search that will reach unprecedented sensitivity to sub-GeV DM-electron interactions with its 10 kg detector array. Oscura is planning to operate at SNOLAB with 2070 m overburden, and aims to reach a background goal of less than one event in each electron bin in the 2-10 electron ionization-signal region for the full 30 kg-year exposure, with a radiation background rate of 0.01 dru. In order to achieve this goal, Oscura must address each potential source of background events, including instrumental backgrounds. In this work, we discuss the main instrumental background sources and the strategy to control them, establishing a set of constraints on the sensors' performance parameters. We present results from the tests of the first fabricated Oscura prototype sensors, evaluate their performance in the context of the established constraints and estimate the Oscura instrumental background based on these results.

The Oscura experiment will lead the search for low-mass dark matter particles using a very large array of novel silicon Charge Coupled Devices (CCDs) with a threshold of two electrons and with a total exposure of 30 kg-yr. The R&D effort, which began in FY20, is currently entering the design phase with the goal of being ready to start construction in late 2024. Oscura will have unprecedented sensitivity to sub-GeV dark matter particles that interact with electrons, probing dark matter-electron scattering for masses down to 500 keV and dark matter being absorbed by electrons for masses down to 1 eV. The Oscura R&D effort has made some significant progress on the main technical challenges of the experiment, of which the most significant are engaging new foundries for the fabrication of the CCD sensors, developing a cold readout solution, and understanding the experimental backgrounds.

We use a science-grade Skipper Charge Coupled Device (Skipper-CCD) operating in a low-radiation background environment to develop a semi-empirical model that characterizes the origin of single-electron events in CCDs. We identify, separate, and quantify three independent contributions to the single-electron events, which were previously bundled together and classified as "dark counts": dark current, amplifier light, and spurious charge. We measure a dark current, which depends on exposure, of (5.89+-0.77)x10^-4 e-/pix/day, and an unprecedentedly low spurious charge contribution of (1.52+-0.07)x10^-4 e-/pix, which is exposure-independent. In addition, we provide a technique to study events produced by light emitted from the amplifier, which allows the detector's operation to be optimized to minimize this effect to a level below the dark-current contribution. Our accurate characterization of the single-electron events allows one to greatly extend the sensitivity of experiments searching for dark matter or coherent neutrino scattering. Moreover, an accurate understanding of the origin of single-electron events is critical to further progress in ongoing R&D efforts of Skipper and conventional CCDs., Comment: 9 pages, 6 figures, 4 tables

We present the first direct-detection search for eV-to-GeV dark matter using a new ~2-gram high-resistivity Skipper-CCD from a dedicated fabrication batch that was optimized for dark-matter searches. Using 24 days of data acquired in the MINOS cavern at the Fermi National Accelerator Laboratory, we measure the lowest rates in silicon detectors of events containing one, two, three, or four electrons, and achieve world-leading sensitivity for a large range of sub-GeV dark matter masses. Data taken with different thicknesses of the detector shield suggest a correlation between the rate of high-energy tracks and the rate of single-electron events previously classified as "dark current." We detail key characteristics of the new Skipper-CCDs, which augur well for the planned construction of the ~100-gram SENSEI experiment at SNOLAB., Comment: 5 pages, 4 figures, 1 table + Supplemental Materials (5 pages, 8 figures) + References. v3: matches version published in PRL

We use the Iocco et al. (2015) compilation of 2,780 circular velocity measurements to analyze the Milky Way rotation curve. We find that the error bars for individual measurements are non-gaussian, and hence instead derive median statistics binned central circular velocity values and error bars from these data. We use these median statistics central values and error bars to fit the data to simple, few parameter, rotation curve functions. These simple functions are unable to adequately capture the significant small scale spatial structure in these data and so provide poor fits. We introduce and use the Gaussian Processes (GP) method to capture this small scale structure and use it to derive Milky Way rotation curves from the binned median statistics circular velocity data. The GP method rotation curves have significant small-scale spatial structure superimposed on a broad rise to galactocentric radius $R\approx7$ kpc and a decline at larger $R$. We use the GP method median statistics rotation curve to measure the Oort $A$ and $B$ constants and other characteristic rotation curve quantities. We study correlations in the residual circular velocities (relative to the GP method rotation curve). Along with other evidence for azimuthal asymmetry of the Milky Way circular rotation velocity field, we find that larger residual circular velocities seem to favor parts of spiral arms., Comment: 37 pages, 32 figures. Comments are welcome