Search

Printed electronics offer ultra-low manufacturing costs and the potential for on-demand fabrication of flexible hardware. However, significant intrinsic constraints stemming from their large feature sizes and low integration density pose design challenges that hinder their practicality. In this work, we conduct a holistic exploration of printed neural network accelerators, starting from the analog-to-digital interface - a major area and power sink for sensor processing applications - and extending to networks of ternary neurons and their implementation. We propose bespoke ternary neural networks using approximate popcount and popcount-compare units, developed through a multi-phase evolutionary optimization approach and interfaced with sensors via customizable analog-to-binary converters. Our evaluation results show that the presented designs outperform the state of the art, achieving at least 6x improvement in area and 19x in power. To our knowledge, they represent the first open-source digital printed neural network classifiers capable of operating with existing printed energy harvesters., Comment: Accepted for publication at ICCAD '24

In Federated Learning (FL), devices that participate in the training usually have heterogeneous resources, i.e., energy availability. In current deployments of FL, devices that do not fulfill certain hardware requirements are often dropped from the collaborative training. However, dropping devices in FL can degrade training accuracy and introduce bias or unfairness. Several works have tacked this problem on an algorithmic level, e.g., by letting constrained devices train a subset of the server neural network (NN) model. However, it has been observed that these techniques are not effective w.r.t. accuracy. Importantly, they make simplistic assumptions about devices' resources via indirect metrics such as multiply accumulate (MAC) operations or peak memory requirements. In this work, for the first time, we consider on-device accelerator design for FL with heterogeneous devices. We utilize compressed arithmetic formats and approximate computing, targeting to satisfy limited energy budgets. Using a hardware-aware energy model, we observe that, contrary to the state of the art's moderate energy reduction, our technique allows for lowering the energy requirements (by 4x) while maintaining higher accuracy.

Printed Electronics (PE) feature distinct and remarkable characteristics that make them a prominent technology for achieving true ubiquitous computing. This is particularly relevant in application domains that require conformal and ultra-low cost solutions, which have experienced limited penetration of computing until now. Unlike silicon-based technologies, PE offer unparalleled features such as non-recurring engineering costs, ultra-low manufacturing cost, and on-demand fabrication of conformal, flexible, non-toxic, and stretchable hardware. However, PE face certain limitations due to their large feature sizes, that impede the realization of complex circuits, such as machine learning classifiers. In this work, we address these limitations by leveraging the principles of Approximate Computing and Bespoke (fully-customized) design. We propose an automated framework for designing ultra-low power Multilayer Perceptron (MLP) classifiers which employs, for the first time, a holistic approach to approximate all functions of the MLP's neurons: multiplication, accumulation, and activation. Through comprehensive evaluation across various MLPs of varying size, our framework demonstrates the ability to enable battery-powered operation of even the most intricate MLP architecture examined, significantly surpassing the current state of the art., Comment: Accepted for publication at the 42th IEEE/ACM International Conference on Computer Aided Design (ICCAD) 2023, San Francisco, USA

One of the major barriers that CMOS devices face at nanometer scale is increasing parameter variation due to manufacturing imperfections. Process variations severely inhibit the reliable operation of circuits, as the operational frequency at the nominal process corner is insufficient to suppress timing violations across the entire variability spectrum. To avoid variability-induced timing errors, previous efforts impose pessimistic and performance-degrading timing guardbands atop the operating frequency. In this work, we employ approximate computing principles and propose a circuit-agnostic automated framework for generating variability-aware approximate circuits that eliminate process-induced timing guardbands. Variability effects are accurately portrayed with the creation of variation-aware standard cell libraries, fully compatible with standard EDA tools. The underlying transistors are fully calibrated against industrial measurements from Intel 14nm FinFET in which both electrical characteristics of transistors and variability effects are accurately captured. In this work, we explore the design space of approximate variability-aware designs to automatically generate circuits of reduced variability and increased performance without the need for timing guardbands. Experimental results show that by introducing negligible functional error of merely $5.3\times 10^{-3}$, our variability-aware approximate circuits can be reliably operated under process variations without sacrificing the application performance., Comment: 13 pages, 14 figures

Deep Neural Networks (DNNs) have shown significant advantages in a wide variety of domains. However, DNNs are becoming computationally intensive and energy hungry at an exponential pace, while at the same time, there is a vast demand for running sophisticated DNN-based services on resource constrained embedded devices. In this paper, we target energy-efficient inference on embedded DNN accelerators. To that end, we propose an automated framework to compress DNNs in a hardware-aware manner by jointly employing pruning and quantization. We explore, for the first time, per-layer fine- and coarse-grained pruning, in the same DNN architecture, in addition to low bit-width mixed-precision quantization for weights and activations. Reinforcement Learning (RL) is used to explore the associated design space and identify the pruning-quantization configuration so that the energy consumption is minimized whilst the prediction accuracy loss is retained at acceptable levels. Using our novel composite RL agent we are able to extract energy-efficient solutions without requiring retraining and/or fine tuning. Our extensive experimental evaluation over widely used DNNs and the CIFAR-10/100 and ImageNet datasets demonstrates that our framework achieves $39\%$ average energy reduction for $1.7\%$ average accuracy loss and outperforms significantly the state-of-the-art approaches., Comment: 14 pages, 9 figures

The demand of many application domains for flexibility, stretchability, and porosity cannot be typically met by the silicon VLSI technologies. Printed Electronics (PE) has been introduced as a candidate solution that can satisfy those requirements and enable the integration of smart devices on consumer goods at ultra low-cost enabling also in situ and ondemand fabrication. However, the large features sizes in PE constraint those efforts and prohibit the design of complex ML circuits due to area and power limitations. Though, classification is mainly the core task in printed applications. In this work, we examine, for the first time, the impact of neural minimization techniques, in conjunction with bespoke circuit implementations, on the area-efficiency of printed Multilayer Perceptron classifiers. Results show that for up to 5% accuracy loss up to 8x area reduction can be achieved., Comment: Accepted for publication at the 26th Design, Automation and Test in Europe Conference (DATE'23), April 17-19 2022, Antwerp, Belgium

Transistor aging phenomena manifest themselves as degradations in the main electrical characteristics of transistors. Over time, they result in a significant increase of cell propagation delay, leading to errors due to timing violations, since the operating frequency becomes unsustainable as the circuit ages. Conventional techniques employ timing guardbands to mitigate aging-induced delay increase, which leads to considerable performance losses from the beginning of the circuit's lifetime. Leveraging the inherent error resilience of a vast number of application domains, approximate computing was recently introduced as an aging mitigation mechanism. In this work, we present the first automated framework for generating aging-aware approximate circuits. Our framework, by applying directed gate-level netlist approximation, induces a small functional error and recovers the delay degradation due to aging. As a result, our optimized circuits eliminate aging-induced timing errors. Experimental evaluation over a variety of arithmetic circuits and image processing benchmarks demonstrates that for an average error of merely $5\times10^{-3}$, our framework completely eliminates aging-induced timing guardbands. Compared to the respective baseline circuits without timing guardbands (i.e., iso-performance evaluation), the error of the circuits generated by our framework is $1208$x smaller.

Although Printed Electronics (PE) cannot compete with silicon-based systems in conventional evaluation metrics, e.g., integration density, area and performance, PE offers attractive properties such as on-demand ultra-low-cost fabrication, flexibility and non-toxicity. As a result, it targets application domains that are untouchable by lithography-based silicon electronics and thus have not yet seen much proliferation of computing. However, despite the attractive characteristics of PE, the large feature sizes in PE prohibit the realization of complex printed circuits, such as Machine Learning (ML) classifiers. In this work, we exploit the hardware-friendly nature of Decision Trees for machine learning classification and leverage the hardware-efficiency of the approximate design in order to generate approximate ML classifiers that are suitable for tiny, ultra-resource constrained, and battery-powered printed applications., Comment: Accepted at the 23rd International Symposium on Quality Electronic Design (ISQED'22), April 6-7, 2022 (Virtual Conference)

Current state-of-the-art employs approximate multipliers to address the highly increased power demands of DNN accelerators. However, evaluating the accuracy of approximate DNNs is cumbersome due to the lack of adequate support for approximate arithmetic in DNN frameworks. We address this inefficiency by presenting AdaPT, a fast emulation framework that extends PyTorch to support approximate inference as well as approximation-aware retraining. AdaPT can be seamlessly deployed and is compatible with the most DNNs. We evaluate the framework on several DNN models and application fields including CNNs, LSTMs, and GANs for a number of approximate multipliers with distinct bitwidth values. The results show substantial error recovery from approximate re-training and reduced inference time up to 53.9x with respect to the baseline approximate implementation., Comment: Accepted for publication in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems