1,065 results on '"Sivasankaran, S."'
Search Results
2. Improving Mechanical and Tribological Characteristics of Cast Elektron 21 Alloy by Reinforcing its Surface with Al0.3Cu0.3Ni0.1Si0.1W0.2 High Entropy Alloy via Friction Stir Processing Route
3. Influence of medium- and high-entropy alloy fillers on microstructures and corrosion behaviour of AA5083 plates joined by GTAW process
4. Evaluating the metallurgical and corrosion characteristics of HVOF-sprayed Ni and Ni-TiB2 coatings on duplex stainless steel
5. Effect of SS 316, SS 304 and carbon steel electrodes on the performance of homemade electrolyzer, microstructural changes and corrosion characteristics during green hydrogen production
6. Interpretation of X-ray peak profile analysis and HRTEM morphology of mechanochemical synthesized Al-Zr-x Vol.% RE (CeO2 + Y2O3) nanocomposites powders: A comparative study
7. Influence of eutectic-Si in as-cast and fibrous-eutectic-Si in LPBF-processed AlSi10Mg alloys on wear and corrosion behaviors treated with direct aging route
8. Synthesis, Microstructures, Mechanical, and Corrosion Behavior of FeMn(35−x)–x (Cu, W, and Co)-Based Biodegradable Alloys Prepared by Mechanical Alloying and Selective Laser Melting
9. Influence of heating temperature and time on mechanical-degradation, microstructures and corrosion performances of Teflon/granite coated aluminum alloys used for non-stick cookware
10. RiceSeedNet: Rice seed variety identification using deep neural network
11. Mixed Convective Flow of a Radiative Maxwell Liquid Past a Porous Riga Plate with Heat Consumption and Dual Stratifications
12. Impact of Radiation on Flow of Copper-Water Nanofluid Squeezed Between Parallel Plates Filled with Darcy Porous Medium
13. Influence of Tilting Angle and Heater Locations on MHD Mixed Convection in a Tilted Box
14. Non-Darcian Combined Convection of Water Near Its Maximum Density in a Porous Lid-Driven Box with Linearly Heating
15. Synthesis, characterization, and mechanical behavior of ultra-fine-grained Ti-6Al-5V alloy prepared by mechanical alloying and spark plasma sintering
16. Synergetic effect of piled-up material around the nanoindentation cavity on additively manufactured Cu-Cr-Zr alloy
17. Synergistic strengthening mechanism and microstructural evolution of Al-Zn-Mg-Cu/ Al2O3/Y2O3 hybrid nanocomposite via mechanical alloying and hot pressing
18. Effect of microstructural evolution during melt pool formation on nano-mechanical properties in LPBF based SS316L parts
19. Effect of martensitic phase formation on the nano-mechanical attributes during the electron beam melting process of Ti-6Al-4V
20. Influence of microstructural refinement on cold deformation behavior of nanocrystalline Al–Zn–Mg alloy processed by solid-state mechanical milling and hot pressing
21. Effect of Direct Aging on the Microstructure and Mechanical Behavior of AlSi10Mg Alloy: Casting Versus Selective Laser Melting
22. Tungsten Nanoparticle Reinforced AA7055 via Friction Stir Process Route with Multi-groove Strategy
23. Microstructural and electrochemical behavior of spark plasma sintered (Cu-10Zn) + Al2O3 nanocomposites
24. Evaluation of the biocompatibility, antibacterial and anticancer effects of a novel nano-structured Fe–Mn-based biodegradable alloys in-vitro study
25. Metallurgical enhancement and mechanical performance of GTAW of AA5083 plates using medium and high-entropy fillers
26. A comparative study on X-ray peak broadening analysis of mechanically alloyed Al2O3 particles dispersion strengthened Al 7017 alloy
27. Numerical study on thermo-solutal combined convection in a lid-driven chamber with heat/cold sources on sidewalls
28. Evaluation of Microstructures, Mechanical and Dry-Sliding Wear Performance of A356-(Fly Ash/SiCp) Hybrid Composites
29. Effect of chemical reaction on double diffusive MHD squeezing copper water nanofluid flow between parallel plates
30. Investigations on work hardening behaviour and relative slip distance in GTA welded AA 6063 plates using AA 5356-TiB2 filler rod
31. Manufacturing of (Al–10Zn) / TiB2 in-situ nanocomposites by reactive liquid metallurgy and hot-extrusion for enhanced interfacial bonding and mechanical properties
32. A Review of Social Media Content Sentiment Analysis using Deep Learning
33. Mixed Convective Flow of a Radiative Maxwell Liquid Past a Porous Riga Plate with Heat Consumption and Dual Stratifications
34. Impact of Radiation on Flow of Copper-Water Nanofluid Squeezed Between Parallel Plates Filled with Darcy Porous Medium
35. Non-Darcian Combined Convection of Water Near Its Maximum Density in a Porous Lid-Driven Box with Linearly Heating
36. Structure and mechanical properties of in-situ synthesized α-Ti/TiO2/TiC hybrid composites through mechanical milling and spark plasma sintering
37. Evolution of microstructure and mechanical properties of [Cu–10Ni]–Si3N4 nanocomposites developed using mechanical alloying and spark plasma sintering
38. Impact of stratifications and chemical reaction on convection of a non-Newtonian fluid in a Riga plate with thermal radiation and Cattaneo-Christov flux
39. Microstructural Evolutions, Hot Deformation and Work Hardening Behaviour of Novel Al–Zn Binary Alloys Processed by Squeezing and Hot Extrusion
40. Enhancement of tensile strength in AA 6061-T6 plates joined by gas tungsten arc welding using high entropy alloy filler sheet
41. Free convection in an inclined porous cavity with sinusoidal heating on sidewalls
42. Long term outcomes after bare metal stent implantation
43. Synthesis, phase evolutions, microstructures, and compaction behavior of four copper-chalcogenide micron-thermoelectric powders (Cu2ZnSnS4/Se4, Cu2MnSiS4/Se4, Cu2MnSnS4/Se4, and Cu2ZnSiS4/Se4) prepared by mechanical alloying
44. A comprehensive exploration on the development of nano Y2O3 dispersed in AA 7017 by mechanical alloying and hot-pressing technique
45. Microstructural and Wear Behaviour of Al 6063–W Nanocomposites Developed Using Friction Stir Processing
46. Microstructural evolutions and enhanced mechanical performance of novel Al-Zn die-casting alloys processed by squeezing and hot extrusion
47. Impact of double-stratification on convective flow of a non-Newtonian liquid in a Riga plate with Cattaneo-Christov double-flux and thermal radiation
48. Microstructural evolutions and mechanical properties enhancement of AA 6063 alloy reinforced with Tungsten (W) nanoparticles processed by friction stir processing
49. Synthesis, microstructural investigation and compaction behavior of Al0.3CrFeNiCo0.3Si0.4 nanocrystalline high entropy alloy
50. Convective heat and mass transfer of chemically reacting fluids with activation energy along with Soret and Dufour effects
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.