Search

The synthesis by coprecipitation of Layered Double Hydroxides (LDHs) is governed by the stages of nucleation and crystal growth associated with the efficiency of the mixing and dispersion process of the reagents. Mixing efficiency is related to process variables, such as agitation speed, type of impeller and baffles presence, among others. In this context, this work proposes an analysis of these variables in a batch reactor, using a 2 3 factorial design employing the factors: acceleration speed (200 and 1000 rpm), mixing time (2 and 18 h) and presence or absence of baffles. The results were evaluated quantitatively (amount of LDH produced, time and amount of base for the formation of LDHs to begin) and qualitatively (mixing aspects, sedimentation ad grinding). The significant factors affecting the amount of LDH produced (51.94-80.81 g) were agitation speed and aging time. These factors were also correlated with the structural characteristics of the materials produced, such as crystallinity, crystallite size (70.99-174.79 nm), surface area (69.81-97.62 m 2 /g), pore volume (0.28-0.59 cm 3 /g), and pore diameter (11.40-34.66 nm). LDHs produced at higher agitation rates (1000 rpm) and longer aging times (18 h) yielded higher quantities of materials (80.81 g) with improved structural characteristics. The study highlights the importance of systematically exploring the synergistic effect between process variables, emphasizing the research potential in this area., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:I am an associated editor of Heliyon – Chemical Engineering section., (© 2024 The Authors.)

Phenolic compounds are natural dyes contained in sugarcane juice and represent an important parameter in industrial processing, as they significantly affect the color formation of raw sugar. This study investigated the relationship between color formation and phenolic compounds during a Very High Polarization (VHP) sugar manufacturing process, in which the RB92579 genotype represents about 50% of the processed sugarcane. The products evaluated during the industrial processing of sugarcane were: raw juice, mixed juice, lime-treated juice, clarified juice, syrup, massecuite, and VHP sugar. The polyphenols catechin (CAT), chlorogenic acid (CGA), caffeic acid (CAF), vanillin (VAN), syringaldehyde (SYR), p-coumaric acid (p-COU), coumarin (CUM), and rutin (RUT) were quantified by high-performance liquid chromatography (HPLC). The highest concentrations of CGA and SYR were obtained from the sucrose crystallization product (massecuite), similarly to the parameters of color, total phenols and the total polyphenol content. CGA was the predominant polyphenol in the samples of clarified juice, syrup, massecuite and VHP sugar, with the latter presenting concentrations above 50%. The presence of phenolic compounds provided different indices of color during the production process. In this context, chlorogenic acid (CGA) was the compound that presented the most expressive results, contributing significantly to the formation of color in sugarcane processing products, which is a fact that has not yet been reported in the literature. The color of the VHP sugar crystals also had a positive relationship with the concentration of phenolics, with greater evidence for CGA., (© 2022. The Author(s).)

The disposal of coconut wastes is costly and damaging to the environment, but its uses are advantageous activated carbons production. Coconut leaves waste were used for activated carbon production by pyrolysis at 500° C and activation with potassium carbonate. The activated carbon was used for caffeine removal from aqueous solution. The coconut leaves activated carbon showed a predominantly amorphous structure from X-ray diffraction analysis and a pH at the zero charge point of 7.9. From the N 2 adsorption/desorption method, the adsorbent showed a predominance of mesopores, with average pore size of 45.48 ηm and a surface area of 678.03 m 2 /g. From kinetic studies the data followed the pseudo-second order, where the intraparticle diffusion can be neglected. The adsorption isotherms were satisfactorily adjusted for the Redlich-Peterson model and a type curve L was identified. The thermodynamic parameters showed that adsorption occurred spontaneously, was exothermic and governed by physical adsorption. The artificial neural networks developed were capable of predicting both kinetics and equilibrium adsorption data under different operating conditions and was comparable to the traditional models available in literature in the training experiments, encouraging its use for data generalization when an efficient dataset is used. In conclusion, coconut leaves waste showed to be a promising feedstock to produce activated carbon aiming caffeine removal from water and wastewater., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The oil spill off the coast of the Brazilian Northeast region is one of the most significant global events regarding contamination and environmental impact in recent years. This work evaluates the effects of oil spills on the Northeast coasts between Alagoas and Sergipe states from October 2019 to January 2020. Analysis of some sampling points of seawater revealed the presence of Hg, Cd, Pb, and Cu in levels above the maximum concentration limits established by the Brazilian legislation. For water quality parameters, phosphorus, nitrite, and turbidity showed statistically different values. However, the chromatographic profiles of oil obtained from different beaches were quite similar. Seawater, fishes, and massunins (bivalve) presented the main polycyclic aromatic hydrocarbons: naphthalene, phenanthrene, fluoranthene, fluorene, and acenaphthalene. Therefore, the concentration of organic and inorganic contaminants determined in different environmental locations served as a subsidy to assess the effect of the preliminary oil spill on the Brazilian coast., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The endocarp of Wodyetia bifurcata was used to produce biochar by vacuum pyrolysis as an alternative adsorbent for methylene blue (MB) removal. The influence of different pyrolysis temperatures, particle diameters and activation agents in the adsorption process was studied. Kinetics and adsorption equilibrium were also evaluated. Biochar obtained at higher pyrolysis temperatures and activated with H 3 PO 4 showed the best adsorptive capacities, achieving 83% of MB removal. The experimental data fitted better with pseudo-second order model. Isotherms performed at 25, 40, 50 and 60 °C showed that the adsorption of MB onto the activated biochar had no concentration dependence in the range studied. Experimental isotherms fitted well with the Freundlich and Sips models and the thermodynamic parameters suggested a physical adsorption mechanism in a heterogeneous surface, spontaneous at all temperatures evaluated. In brief, the activated carbon obtained from Wodyetia bifurcata can be a promising material for MB removal from aqueous solutions., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Produced water is the largest liquid effluent in volume generated in petroleum production. It originates from natural wells or from water that was previously injected during the exploration process. The composition of produced water is complex, containing high salt concentration, emulsified oil, suspended solids, chemical additives used in the various stages of oil production, heavy metals, and other contaminants. Several technologies can be used in the treatment of produced water in order to meet the conditions specified in local legislations and the most used are phase separators, decanters, cyclones, and filters. The separation process mechanism of oil emulsions by coalescence in fibrous media has excellent results, though it is not fully understood and is frequently based on empirical, as well as on experimental, observations. This article presents a general overview on produced water, including origin, production, composition, environmental impact, treatment techniques, disposal, and legislation, as well as an updated discussion utilizing recent literature regarding the unit operation of coalescence: general aspects, kinetics, mechanisms, and factors that influence the coalescence process.

This work aims to produce activated carbon from the endocarp of Syagrus oleracea by vacuum pyrolysis and evaluate its potential as an adsorbent. The effects of pyrolysis temperature (400 °C, 500 °C, 600 °C, and 700 °C), particle diameter (0.467 mm, 0.267 mm, and lower than 0.234 mm), and activation agent (H 2 SO 4 , H 2 PO 3 , and KOH) on the potential for methylene blue adsorption were investigated. In addition, kinetics and adsorption equilibrium were evaluated. The best condition found was particle diameter < 0.234 mm, final pyrolysis temperature of 700 °C, and using KOH. Adsorption kinetics followed pseudo-second order, with equilibrium reached within 20 min. Isotherms followed the Freundlich model. Values of adsorption capacity were in the order of 30 mg/g. Thermodynamic parameters indicated that adsorption occurred spontaneously with a reduction in the heterogeneity of the solid interface/solution. The results obtained demonstrate the great adsorption capacity of the activated carbon prepared from endocarp of Syagrus oleracea via vacuum pyrolysis for the removal of up to 98% methylene blue from aqueous solutions.

In this work, agro-wastes coming from soursop (peel, seeds and pulp fiber) and sugarcane (bagasse) are used as low-cost biosorbents to remove methylene blue (MB) from aqueous media. Batch experiments are performed under different experimental conditions investigating the effects of biosorbent amount, dye concentration and stirring rate. The best results were found using soursop wastes for a MB concentration of 100 mg L -1 , using 0.75 g of residue and a stirring rate of 110 rpm, removing a percentage above 90%. Theoretically, adsorption kinetic can be successfully described by the pseudo-second order model. Redlich-Peterson and Sips models are adopted to interpret the equilibrium adsorption of MB on sugarcane bagasse and soursop residue, respectively. Interestingly, the monolayer model with single energy derived by statistical physics theory is also applied for a deeper explanation of the adsorption mechanism of MB on both the adsorbents. The application of this model allows defining the adsorption geometry of the investigated adsorbate and provides important information about the interactions between the adsorbate and sorbents. In particular, the modelling analysis by statistical physics allows defining that the dye molecules are adsorbed in vertical position and the adsorption process is multi-molecular (i.e. n > 1). Finally, the estimation of adsorption energy suggested that MB adsorption on biosorbent is a physisorption process., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This work evaluates the application of Mytella falcata shells, discarded in large quantities in the state of Alagoas, Brazil, as adsorbent for methylene blue dye (MB). It was investigated how the amount of adsorbent (M), the average particle diameter (G), and the agitation speed (A) affected the adsorption. Kinetic and equilibrium studies were conducted, and the pseudo-second-order equation adequately represented the kinetic data and isotherms following Liu's model (q max  = 8.81 mg g -1 at 60 °C). The adsorption was spontaneous, favorable, and endothermic. Mytella falcata shell is a suitable adsorbent for MB and could potentially contribute to its removal from the environment.

In this work, the potential of ouricuri (Syagrus coronata) fiber as a novel biosorbent to remove methylene blue (MB) from aqueous solutions was investigated. The fiber was prepared and characterized according to the fundamental features for adsorption. A 2 3 experimental design was used to evaluate the effects of adsorbent dosage (M), fiber diameter (D) and agitation (A) on the adsorption capacity. In the more adequate conditions, kinetic and equilibrium studies were performed. The experimental design results showed that M = 10 g L -1 ), D = 0.595 mm and A = 200 rpm were the more adequate conditions for MB adsorption. Based on the kinetic study, it was found that the adsorption process was fast, being the equilibrium was attained at about 5 min, with 90% of color removal. The isotherm was properly represented by the Sips model, and the maximum adsorption capacity was 31.7 mg g -1 . In brief, it was demonstrated that ouricuri fiber is an alternative biosorbent to remove MB from aqueous media, taking into account the process efficiency and economic viewpoint.