Search

Stretchable devices, garnering increasing attention as next-generation form factors, have a crucial problem in that vertical contraction occurs during stretching, causing image distortion of stretchable displays and discomfort in skin-attached devices. Previous structural strategies to mitigate vertical contraction, such as auxetic reentrants and wrinkles, suffer from the drawback that their structure becomes visible during stretching. In this study, this issue is addressed by unidirectionally aligning nanoscopic cylinders within block copolymer elastomer films. Employing a shear-rolling process at high temperatures on thick films of polystyrene-block-polyisobutylene-block-polystyrene thermoplastic elastomers, macroscopic mechanical anisotropy is achieved, resulting in completely transparent and monotonically stretchable substrates devoid of vertical or depth distortion during deformation. Significantly, the unidirectional orientation of high-modulus cylindrical nanostructures induces macroscopic mechanical anisotropy with a modulus ratio exceeding five times. While the Poisson's ratio of conventional elastic materials hovers around ≈0.5, this mechanical anisotropy minimizes vertical contraction, yielding a Poisson's ratio below 0.07. Moreover, owing to the negligible size of the nanocylinders compared to visible-light wavelengths, the substrate can be monotonically uniaxially stretched while maintaining high transmittance without introducing distortions, surface undulations, or haziness, resulting in distortion-free stretchable substrates., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

The photovoltaic performance of inverted perovskite solar cells (PSCs) relies on effectively managing the interface between the hole extraction layer and the light-absorbing perovskite layer. In this study, we have synthesised (4-(3,6-bis(methylthio)-9H-carbazol-9-yl)butyl)phosphonic acid (MeS-4PACz), which forms a self-assembled monolayer on the fluorine-doped tin oxide (FTO) electrode. The molecule's methylthio substituents generate a favourable interfacial dipole moment and interact with the perovskite layer. This interaction results in well-aligned energy levels among the FTO/SAM/perovskite layers, promoting efficient hole extraction and significantly reducing carrier recombination losses. Additionally, the methylthio groups passivate iodide vacancies and interact with Pb2+ ions of the perovskite, reducing defect-induced trap states and enhancing the crystalline growth of the perovskite layer. Consequently, inverted PSCs incorporating MeS-4PACz achieve a remarkable power conversion efficiency of 25.13%, along with outstanding photostability., (© 2024 Wiley‐VCH GmbH.)

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) measurement data and machine learning were used in this work to classify six different types of plastics. In order to take into account the characteristics of the measurement data, the local maxima of the measurement data were first examined in a preprocessing step. Several machine learning methods were then implemented to create a model that could successfully classify the plastics. To visualize the data distribution, we applied a dimensionality reduction method, namely, principal component analysis. Finally, to distinguish between the six types of plastics, we conducted an ensemble analysis using four tree-based algorithms: decision tree, random forest, gradient boosting, and LIGHTGBM. This approach can identify the feature importance of plastic samples and allow the inference of the chemical properties of each plastic type. In this way, ToF-SIMS data could be utilized to successfully classify plastics and enhance explainability.

The need for basement membrane extract (BME) with undefined constituents, such as Matrigel, for intestinal stem cell (ISC) culture in traditional systems poses a significant barrier that must be overcome for the development of clinical-grade, scalable, ready-to-use ISCs. Here, we propose a functional polymer-based xenogeneic-free dish for the culture of intestinal stem cells (XF-DISC), ensuring substantially prolonged maintenance of ISCs derived from 3-dimensional human intestinal organoids (ISCs 3D-hIO ). XF-DISC enables remarkable expandability, exhibiting a 24-fold increase in cell numbers within 30 days, with long-term maintenance of ISCs 3D-hIO for more than 30 consecutive passages (>210 days). In addition, XF-DISC is fully compatible with a cell banking system. Notably, human pluripotent stem cell-derived ISCs 3D-hIO cultured on XF-DISC are successfully transplanted into intestinal injury and inflammation mouse models, leading to engraftment and regeneration of damaged mouse intestinal epithelium. As a reliable and scalable xenogeneic-free ISC 3D-hIO culture method, XF-DISC is highly promising for the development of regenerative ISC therapy for human intestinal diseases., Competing Interests: Competing interests: The authors declare no competing interests. Ethical considerations of working with human cells and animals: This study complies with all relevant ethical regulations. All studies based on human pluripotent stem cells were approved by the Korean Public IRB (IRB number: P01-201409-ES-01-09, P01-201609-31-002). Male NIG mice (Nod/scid-IL2Rgem1/GH, 6–12 weeks old; GHBio, Daejeon, Korea) were housed in a specific pathogen-free facility with a controlled 12-hour light/dark cycle, temperature maintained at 20-22 °C, and relative humidity at 55 ± 5%. The mice were provided with ad libitum access to water and fed a purified AIN-76A diet (Teklad Custom Research Diet, CA.170481; Envigo, Indianapolis, IN, USA). All animal experiments were approved by the Institutional Animal Care and Use Committee (IACUC) of KRIBB (KRIBB-AEC-22233). For the study based on human blood, informed consent was obtained prior to participation with approval from the IRB at Yonsei University Health System (IRB No. 3-2023-0347)., (© 2024. The Author(s).)

The gyroid structure from self-assembly is highly attractive for optical applications such as photonic crystals and metamaterials. However, due to the direction-dependent nature of these applications, achieving a monograin-level structure over a large area has remained challenging. In this study, the fabrication of unidirectionally oriented anisotropic nanocylinders of polystyrene-block-polydimethylsiloxane (PS-b-PDMS) is reported block copolymer thin films up to a 4-inch scale via a shear-rolling process, followed by solvent annealing to induce phase transition to nearly monograin gyroid structures. Grazing-incidence small-angle X-ray scattering (GISAXS) analysis and cross-sectional scanning electron microscope (SEM) images in the direction parallel to the shear-rolling direction reveal the preferential orientation with the (111) plane onto the YZ axis of the film, while only the (110) plane on the YZ axis of the film is observed in the perpendicular direction, with grain sizes approaching single-grain levels. For metamaterial applications, the PDMS domain is selectively removed, and gold is electroplated to produce monograin gold gyroid films., (© 2024 Wiley‐VCH GmbH.)

Reliable characterization of protein coronas (PCs) that form when nanomaterials are introduced into biological fluids is a critical step in the development of safe and efficient nanomedicine. We observed that bovine serum albumin (BSA)-coated multi-walled carbon nanotubes (MWCNTs) do not induce cytotoxicity, but have different cellular uptake rates depending on the BSA pretreatment concentration. To determine how these slight differences affect A549 cell responses and intracellular changes, we conducted spectroscopic (circular dichroism and Fourier-transform infrared) and spectrometric (nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry) analyses. The various characterization techniques conducted in this study reveal the following. (i) The composition ratio of PCs on MWCNTs differs depending on the BSA concentration. (ii) Analysis of the secondary structure of the proteins revealed that the α-helix structure increased with increasing BSA concentration. (iii) Proteomic analysis showed that different biological pathways were activated at levels higher and lower than 5 mg mL -1 . Such combined spectroscopic and spectrometric approaches provide an integrated understanding of PC composition as well as how nano/bio-interface states are linked to cellular-level responses. Our results can support reliable and practical applications of nanomedicine development., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Tin-lead (Sn-Pb) perovskite solar cells (PSCs) hold considerable potential for achieving efficiencies near the Shockley-Queisser (S-Q) limit. Notably, the inverted structure stands as the preferred fabrication method for the most efficient Sn-Pb PSCs. In this regard, it is imperative to implement a strategic customization of the hole selective layer to facilitate carrier extraction and refine the quality of perovskite films, which requires effective hole selectivity and favorable interactions with Sn-Pb perovskites. Herein, we propose the development of Co-Self-Assembled Monolayers (Co-SAM) by integrating both [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and glycine at the buried contacts. The one-step deposition process employed in the fabrication of the Co-SAM ensures uniform coverage, resulting in a homogeneous surface potential. This is attributed to the molecular interactions occurring between 2PACz and glycine in the processing solution. Furthermore, the amine (-NH 2 ) and ammonium (-NH 3 + ) groups in glycine effectively passivate Sn 4+ defects at the buried interface of Sn-Pb perovskite films, even under thermal stress. Consequently, the synergistic buried interface regulation of Co-SAM leads to a power conversion efficiency (PCE) of 23.46%, which outperforms devices modified with 2PACz or glycine alone. The Co-SAM-modified Sn-Pb PSC demonstrates enhanced thermal stability, maintaining 88% of its initial PCE under 65 °C thermal stress for 590 h.

Human pluripotent stem cells (hPSCs), encompassing human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs), hold immense potential in regenerative medicine, offering new opportunities for personalized cell therapies. However, their clinical translation is hindered by the inevitable reliance on xenogeneic components in culture environments. This study addresses this challenge by engineering a fully synthetic, xeno-free culture substrate, whose surface composition is tailored systematically for xeno-free culture of hPSCs. A functional polymer surface, pGC2 (poly(glycidyl methacrylate-grafting-guanidine-co-carboxylic acrylate)), offers excellent cell-adhesive properties as well as non-cytotoxicity, enabling robust hESCs and hiPSCs growth while presenting cost-competitiveness and scalability over Matrigel. This investigation includes comprehensive evaluations of pGC2 across diverse experimental conditions, demonstrating its wide adaptability with various pluripotent stem cell lines, culture media, and substrates. Crucially, pGC2 supports long-term hESCs and hiPSCs expansion, up to ten passages without compromising their stemness and pluripotency. Notably, this study is the first to confirm an identical proteomic profile after ten passages of xeno-free cultivation of hiPSCs on a polymeric substrate compared to Matrigel. The innovative substrate bridges the gap between laboratory research and clinical translation, offering a new promising avenue for advancing stem cell-based therapies., (© 2024 The Author(s). Advanced Materials published by Wiley‐VCH GmbH.)

This study investigates the applicability of six transition metal dichalcogenides to efficient therapeutic drug monitoring of ten antiepileptic drugs using laser desorption/ionization-mass spectrometry. We found that molybdenum ditelluride and tungsten ditelluride are suitable for the sensitive quantification of therapeutic drugs. The contribution of tellurium to the enhanced efficiency of laser desorption ionization was validated through theoretical calculations utilizing an integrated model that incorporates transition-metal dichalcogenides and antiepileptic drugs. The results of our theoretical calculations suggest that the relatively low surface electron density for the tellurium-containing transition metal dichalcogenides induces stronger Coulombic interactions, which results in enhanced laser desorption and ionization efficiency. To demonstrate applicability, up to 120 patient samples were analyzed to determine drug concentrations, and the results were compared with those of immunoassay and liquid chromatography-tandem mass spectrometry. Agreements among these methods were statistically evaluated using the Passing-Bablok regression and Bland-Altman analysis. Furthermore, our method has been shown to be applicable to the simultaneous detection and multiplexed quantification of antiepileptic drugs.

Recently, inverted perovskite solar cells (PeSCs) have witnessed significant advancements; however, their long-term stability remains a challenge because of the oxidation of silver cathodes to form AgI by mobile iodides. To overcome this problem, we propose the integration of an electron-deficient naphthalene diimide-based zwitterion (NDI-ZI) as the cathode interlayer. Compared to the physical ion-blocking layer, it effectively captures ions by forming ionic bonds via electrostatic Coulombic interaction to suppress the migration of iodide and Ag ions. The NDI-ZI interlayer also suppresses the shunt paths and modulates the work function of the Ag electrode by forming interface dipoles, thereby enhancing charge extraction. FA 0.85 Cs 0.15 PbI 3 based PeSCs incorporating NDI-ZI exhibited a noticeably high power conversion efficiency of up to 23.3% and outstanding stability, maintaining ∼80% of their initial performance over 1500 h at 85 °C and over 500 h under continuous 1-sun illumination. This study highlights the potential of a zwitterionic cathode interlayer in diverse perovskite optoelectronic devices, leading to their improved efficiency and stability.

With the rapid development of human-friendly wearable devices, energy storage components are required to have skin-like stretchability or free-form to fit closer and more comfortably to the human body. This study introduces a hierarchically interpenetrated reentrant microcellular structure combined with 2D cellular graphene/MXene/carbon nanotubes (CNTs) and 3D cellular melamine foam. This composite structure works as a stretchable framework of lithium metal composite electrodes to provide stretchability for lithium metal electrodes, which are promising as next-generation energy storage systems. The interpenetrated but independent cellular structures successfully obtain stable structural deformability from the nonconductive and deformable melamine foam, while at the same time, high electrical conductivity, lithiophilicity, and mechanical stability of the graphene/CNT/MXene network serve as a lithium deposition support during the electrodeposition of lithium. The reentrant structure is fabricated by radial compressing the hierarchical cellular structures to take advantage of the structural stretchability of the accordion-like reentrant frameworks. The lithium-deposited composite electrodes exhibit much lower overpotential during Li stripping and plating than lithium metal foil anodes and show stable electrochemical performances under 30% of mechanical strain. The reentrant microcellular electrodes offer great potential for advanced designs of lithium metal electrodes for stretchable batteries with high energy density., (© 2023 The Authors. Small published by Wiley‐VCH GmbH.)

Lipid alterations in the brain are well-documented in disease and aging, but our understanding of their pathogenic implications remains incomplete. Recent technological advances in assessing lipid profiles have enabled us to intricately examine the spatiotemporal variations in lipid compositions within the complex brain characterized by diverse cell types and intricate neural networks. In this study, we coupled time-of-flight secondary ion mass spectrometry (ToF-SIMS) to an amyotrophic lateral sclerosis (ALS) Drosophila model, for the first time, to elucidate changes in the lipid landscape and investigate their potential role in the disease process, serving as a methodological and analytical complement to our prior approach that utilized matrix-assisted laser desorption/ionization mass spectrometry. The expansion of G 4 C 2 repeats in the C9orf72 gene is the most prevalent genetic factor in ALS. Our findings indicate that expressing these repeats in fly brains elevates the levels of fatty acids, diacylglycerols, and ceramides during the early stages (day 5) of disease progression, preceding motor dysfunction. Using RNAi-based genetic screening targeting lipid regulators, we found that reducing fatty acid transport protein 1 (FATP1) and Acyl-CoA-binding protein (ACBP) alleviates the retinal degeneration caused by G 4 C 2 repeat expression and also markedly restores the G 4 C 2 -dependent alterations in lipid profiles. Significantly, the expression of FATP1 and ACBP is upregulated in G 4 C 2 -expressing flies, suggesting their contribution to lipid dysregulation. Collectively, our novel use of ToF-SIMS with the ALS Drosophila model, alongside methodological and analytical improvements, successfully identifies crucial lipids and related genetic factors in ALS pathogenesis.

In vitro vascularized cancer models utilizing microfluidics have emerged as a promising tool for mechanism study and drug screening. However, the lack of consideration and preparation methods for cancer cellular sources that are capable of adequately replicating the metastatic features of circulating tumor cells contributed to low relevancy with in vivo experimental results. Here, we show that the properties of cancer cellular sources have a considerable impact on the validity of the in vitro metastasis model. Notably, with a hydrophobic surface, we can create highly metastatic spheroids equipped with aggressive invasion, endothelium adhesion capabilities, and activated metabolic features. Combining these metastatic spheroids with the well-constructed microfluidic-based extravasation model, we validate that these metastatic spheroids exhibited a distinct extravasation response to epidermal growth factor (EGF) and normal human lung fibroblasts compared to the 2D cultured cancer cells, which is consistent with the previously reported results of in vivo experiments. Furthermore, the applicability of the developed model as a therapeutic screening platform for cancer extravasation is validated through profiling and inhibition of cytokines. We believe this model incorporating hydrophobic surface-cultured 3D cancer cells provides reliable experimental data in a clear and concise manner, bridging the gap between the conventional in vitro models and in vivo experiments., Competing Interests: None., (© 2023 The Authors.)

The shear-rolling process is a promising directed self-assembly method that can produce high-quality sub-10 nm block copolymer line-space patterns cost-effectively and straightforwardly over a large area. This study presents a high temperature (280 °C) and rapid (~0.1 s) shear-rolling process that can achieve a high degree of orientation in a single process while effectively preventing film delamination, that can be applied to large-area continuous processes. By minimizing adhesion, normal forces, and ultimate shear strain of the polydimethylsiloxane pad, shearing was successfully performed without peeling up to 280 °C at which the chain mobility significantly increases. This method can be utilized for various high-χ block copolymers and surface neutralization processes. It enables the creation of block copolymer patterns with a half-pitch as small as 8 nm in a unidirectional way. Moreover, the 0.1-second rapid shear-rolling was successfully performed on long, 3-inch width polyimide flexible films to validate its potential for the roll-to-roll process., (© 2023. The Author(s).)

Background: Fibrosis plays an important role in both normal physiological and pathological phenomena as fibroblasts differentiate to myofibroblasts. The activation of fibroblasts is determined through interactions with the surrounding extracellular matrix (ECM). However, how this fibroblast-to-myofibroblast transition (FMT) is regulated and affected by elastin concentration in a three-dimensional (3D) microenvironment has not been investigated., Methods: We developed an insoluble elastin-gradient 3D hydrogel system for long-lasting cell culture and studied the molecular mechanisms of the FMT in embedded cells by nanoflow LC-MS/MS analysis along with validation through real-time PCR and immunofluorescence staining., Results: By optimizing pH and temperature, four 3D hydrogels containing fibroblasts were successfully fabricated having elastin concentrations of 0, 20, 50, and 80% in collagen. At the low elastin level (20%), fibroblast proliferation was significantly increased compared to others, and in particular, the FMT was clearly observed in this condition. Moreover, through mass spectrometry of the hydrogel environment, it was confirmed that differentiation proceeded in two stages. In the early stage, calcium-dependent proteins including calmodulin and S100A4 were highly associated. On the other hand, in the late stage after several passages of cells, distinct markers of myofibroblasts were presented such as morphological changes, increased production of ECM, and increased α-SMA expression. We also demonstrated that the low level of elastin concentration induced some cancer-associated fibroblast (CAF) markers, including PDGFR-β, and fibrosis-related disease markers, including THY-1., Conclusion: Using our developed 3D elastin-gradient hydrogel system, we evaluated the effect of different elastin concentrations on the FMT. The FMT was induced even at a low concentration of elastin with increasing CAF level via calcium signaling. With this system, we were able to analyze varying protein expressions in the overall FMT process over several cellular passages. Our results suggest that the elastin-gradient system employing nonlinear optics imaging provides a good platform to study activated fibroblasts interacting with the microenvironment, where the ECM plays a pivotal role., (© 2023. The Korean Society for Biomaterials.)

In this study, the shear-induced lamellar alignment of a thin-film ABA triblock copolymer melt was achieved via a non-equilibrium coarse-grained molecular dynamics simulation. The ABA triblock copolymer system displayed a slightly different phase behavior under different shear conditions compared to the AB diblock copolymer system. Unlike previous studies that only considered the wall velocity, the Flory-Huggins parameter was considered in our study as a factor that determines lamellar alignment. Pre-aligned lamellae and randomly mixed polymers were used as the initial states for the shear simulation to compare the shear-induced lamellar alignment on each. The two initial conditions displayed different alignment behaviors; specifically, in the pre-aligned lamellae, a tilted structure was observed when the system was not aligned in the shear direction. To explain the difference between the tilted and realigned structures, the potential energy over the simulation time, polymer dynamics from the Van Hove correlation function, and the directional order parameter were investigated. It was inferred that a tilted structure is induced by the energy barrier of realignment originating from the restricted movement of the local polymer chains. Once they cross the energy barrier, block copolymers tend to align in the shear direction to attain energy stabilization through the polymer flow.

In the study of degenerative brain diseases, changes in lipids, the main component of neurons, are particularly important because they are used as indicators of pathological changes. One method for the sensitive measurement of biomolecules, especially lipids, is time-of-flight secondary ion mass spectrometry (ToF-SIMS) using pulsed argon cluster ions. In this study, biomolecules including various lipids present in normal mouse brain tissue were measured using ToF-SIMS equipped with pulsed argon cluster primary ions. Based on the ToF-SIMS measurement results, hybrid SIMS (OrbiSIMS), which is a ToF-SIMS system with the addition of an orbitrap mass analyzer, was used to directly identify the biomolecules by the region in the real tissue samples. For this, the results of ToF-SIMS, which measured the tissue samples from a single mouse brain within static limits, were compared with those from OrbiSIMS measured beyond the static limits in terms of the differences in molecular profiling. From this analysis, two types of positive and negative ions were selected for identification, with the OrbiSIMS MS/MS results indicating that the positive ions were glycerophosphocholine and the negative ions were glycerophosphoinositol and sulfatide, a sphingolipid. Then, to confirm the identification of the molecular candidates, lipids were extracted from mirror image tissue samples, and LC-MS/MS also using an orbitrap mass analyzer was performed. As a result, the direct identification of molecular candidate groups distributed in particular regions of the tissue samples via OrbiSIMS was found to be consistent with the identification results by LC-MS/MS for extracted samples., (© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

Recent advances in fabricating stretchable and transparent electrodes have led to various techniques for establishing next-generation form-factor optoelectronic devices. Wavy Ag nanowire networks with large curvature radii are promising platforms as stretchable and transparent electrodes due to their high electrical conductivity and stretchability even at very high transparency. However, there are disadvantages such as intrinsic nonregular conductivity, large surface roughness, and nanowire oxidation in air. Here, we introduce electrically synergistic but mechanically independent composite electrodes by sequentially introducing conducting polymers and ionic liquids into the wavy Ag nanowire network to maintain the superior performance of the stretchable transparent electrode while ensuring overall conductivity, lower roughness, and long-term stability. In particular, plenty of ionic liquids can be incorporated into the uniformly coated conducting polymer so that the elastic modulus can be significantly lowered and sliding can occur at the nanowire interface, thereby obtaining the high mechanical stretchability of the composite electrode. Finally, as a result of applying the composite film as the stretchable transparent electrode of stretchable organic solar cells, the organic solar cell exhibits a high power conversion efficiency of 11.3% and 89% compared to the initial efficiency even at 20% tensile strain, demonstrating excellent stretching stability.

Graphene/polymer actuators were developed using bilayer graphene and various polymer substrates for use as transparent, flexible, and robust electrostatic speaker units. Additionally, a resonant frequency shift was induced using a polymer substrate on which various micropatterns were transferred to boost bass. The total sound pressure level (SPL) in the graphene/polymer actuator was measured by a sweep, and the frequency of the spectrum was confirmed to be one-third that of the octave band frequency. The change in the vibroacoustic characteristic with changes in Young's modulus and density was studied for the polymers of the same size and thickness. Particularly, the possibility of boosting bass was confirmed by inducing a resonant frequency shift and increasing the total SPL by adding micropatterns on a polymer substrate under the same conditions. The resonance frequency of 523 Hz and the SPL of 54 dBA in flat polymer film became 296 Hz and 69 dBA in a specific pattern, which produced a sound of >15 dB based on the same flat polymer. We expect that the design and information provided herein can provide the key parameters required to change the resonant frequency in small-size devices for the application of graphene/polymer thin-film actuators.

The growth of lithium (Li) dendrites reduces the lifespan of Li-metal batteries and causes safety issues. Herein, hierarchically porous aramid nanofiber separators capable of effectively suppressing the Li dendrite growth while maintaining highly stable cycle performances at high charge/discharge rates are reported. A two-step solvent exchange process combined with reprotonation-mediated self-assembly is utilized to control the bimodal porous structure of the separators. In particular, when ethanol and water are used sequentially, aramid nanofibers form hierarchical porous structures containing nanopores in macroporous polymer frameworks to yield a mechanically robust membrane with high porosity of 97% or more. The optimized samples exhibit high ionic conductivities of 1.87-4.04 mS cm -1 and high Li-ion transference numbers of 0.77-0.84 because of the ultrahigh porosity and selective affinity to anions. Li-metal symmetric cells do not show any noticeable presence of dendrites after 100 cycles, and they operate stably for more than 1500 cycles even under extreme conditions with a high current density of >20 mA cm -2 . In addition, the LiFePO 4 /Li full cell retains 86.3% of its capacity after 1000 cycles at a charge rate of 30 C., (© 2022 Wiley-VCH GmbH.)

Ionogels are emerging materials for advanced electrochemical devices; however, their mechanical instability to external stresses has raised concerns about their safety. This study reports aligned bacterial nanocellulose (BC) ionogel films swelled with the model ionic liquid (IL) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF 4 ) for an unprecedented combination of high stiffness and high energy dissipation without significant loss of ionic conductivity. The aligned BC ionogel films are prepared through wet-state stretching methods, followed by drying and swelling by ILs. The aligned ionogel films exhibit significantly improved dynamic mechanical properties, overcoming the mechanical conventional limit of traditional materials by 2.0 times at 25 °C and by a maximum of 4.0 times at 0 °C. Additionally, the same samples exhibit relatively high ionic conductivities of 0.16 mS cm -1 at 20 °C and 0.45 mS cm -1 at 60 °C with storage moduli over 10 GPa. The synergistic effect of the mechanical reinforcements by alignment of the BC nanofibers and the plasticizing effects by ILs could be attributed to the significant enhancement of dynamic mechanical properties and the retention of ionic conductivities. These results will lead to a deeper understanding of the material design for mechanically superior ionogel systems with increasing demands for advanced electronic and electrochemical devices.

The calibration of an ion detection system was carried out for protons and carbon ions from a few tens of keV up to about 1 MeV energies. A Thomson spectrometer deflecting the particle beam accelerated from a laser plasma creates the ion spectra on a phosphor screen behind a micro-channel plate (MCP), which are recorded by a camera. During calibration, the ion spectra simultaneously hit the slotted CR-39 track detector installed in front of the MCP and, passing through the adjacent CR-39 stripes, the MCP. The calibration provides the ratio of the interpolated values between two consecutive stripes of the camera signal and the total number of particles recorded on the corresponding stripe of CR-39. The efficiency of proton detection by CR-39 was also measured in a conventional accelerator beam and found to drop by 20% below 100 keV.

Spatial characterization of 0.5 MeV proton beam, driven by 12 fs, 35 mJ, 10 19  W/cm 2 intense laser-foil interaction is presented. The accelerated proton beam has been applied to obtain a high-resolution, point-projection static radiograph of a fine mesh using a CR-39 plate. The reconstruction of mesh edge blurring and particle ray tracing suggests that these protons have an effective source size (FWHM) of just 3.3 ± 0.3 µm. Furthermore, the spatial distribution of the proton beam recorded on the CR-39 showed that the divergence of these particles is less than 5-degree (FWHM). The low divergence and small source size of the proton beam resulted in an ultralow transverse emittance of 0.00032 π-mm-mrad, which is several orders of magnitude smaller than that of a conventional accelerator beam., (© 2022. The Author(s).)

Interest in resistive random access memory (RRAM) has grown rapidly in recent years for realizing ultrahigh density data storage devices. However, sneak currents in these devices can result in misreading of the data, thus limiting the applicability of RRAM. Complementary resistive switching (CRS) memory consisting of two antiserial RRAMs can considerably reduce sneak currents; however, complicated device architectures and manufacturing processes still remain as challenges. Herein, an effective and simple approach for fabricating CRS memory devices using self-assembled block copolymer micelles is reported. Cu ions are selectively placed in the core of polystyrene-block-poly(2-vinylpyridine) spherical micelles, and a hexagonally packed micelle monolayer is prepared through spin-coating. The micelle monolayer can be a symmetrical resistive switching layer, because the micelles and Cu act as dielectric and active metals in memory devices, respectively. The locally enhanced electric field and Joule heating achieved by the structured Cu atoms inside the micelles promote metal ionization and ion migration in a controlled manner, thus allowing for position selectivity during resistive switching. The micelle-based memory device exhibits stable and reliable CRS behavior, with a nonoverlapping and narrow distribution of threshold voltages. Therefore, this approach is promising for fabricating CRS memory devices for high-performance and ultrahigh-density RRAM applications., (© 2022 Wiley-VCH GmbH.)

For next-generation wearable and implantable devices, energy storage devices should be soft and mechanically deformable and easily printable on any substrate or active devices. Herein, we introduce a fully stretchable lithium-ion battery system for free-form configurations in which all components, including electrodes, current collectors, separators, and encapsulants, are intrinsically stretchable and printable. The stretchable electrode acquires intrinsic stretchability and improved interfacial adhesion with the active materials via a functionalized physically cross-linked organogel as a stretchable binder and separator. Intrinsically stretchable current collectors are fabricated in the form of nanocomposites consisting of a matrix with excellent barrier properties without swelling in organic electrolytes and nanostructure-controlled multimodal conductive fillers. Due to structural and materials freedoms, we successfully fabricate several types of stretchable lithium-ion battery that reliably operates under various stretch deformations with capacity and rate capability comparable with a nonstretchable battery over 2.5 mWh cm -2 at 0.5 C, even under high mass loading conditions over 10 mg cm -2 , including stacked configuration, direct integration on both sides of a stretch fabric, and application of various electrode materials and electrolytes. Especially, our stretchable battery printed on a stretch fabric also exhibits high performance and stretch/long-term stabilities in the air even with wearing and pulling.

Chiral-structured nanoscale materials exhibit chiroptical properties with preferential absorptions of circularly polarized light. The distinctive optical responses of chiral materials have great potential for advanced optical and biomedical applications. However, the fabrication of three-dimensional structures with mirrored nanoscale geometry is still challenging. This study introduces chiral plasmonic nanopatterns in wavy shapes based on the unidirectional alignment of block copolymer thin films and their tilted transfer, combined with buckling processes. The cylindrical nanodomains of polystyrene- block -poly(2-vinylpyridine) thin films were unidirectionally aligned over a large area by the shear-rolling process. The aligned block copolymer thin films were transferred onto uniaxially prestrained polydimethylsiloxane films at certain angles relative to the stretching directions. The strain was then released to induce buckling. The aligned nanopatterns across the axis of the formed microwrinkles were selectively infiltrated with gold ions. After reduction by plasma treatment, chiral plasmonic nanowave patterns were fabricated with the presence of mirror-reflected circular dichroism spectra. This fabrication method does not require any lithography processing or innately chiral biomaterials, which can be advantageous over other conventional fabrication methods for artificial nanoscale chiral materials.

Research on the chiral magneto-optical properties of inorganic nanomaterials has enabled novel applications in advanced optical and electronic devices. However, the corresponding chiral magneto-optical responses have only been studied under strong magnetic fields of ≥1 T, which limits the wider application of these novel materials. In this paper, we report on the enhanced chiral magneto-optical activity of supra-assembled Fe 3 O 4 magnetite nanoparticles in the visible range at weak magnetic fields of 1.5 mT. The spherical supra-assembled particles with a diameter of ∼90 nm prepared by solvothermal synthesis had single-crystal-like structures, which resulted from the oriented attachment of nanograins. They exhibited superparamagnetic behavior even with a relatively large supraparticle diameter that exceeded the size limit for superparamagnetism. This can be attributed to the small size of nanograins with a diameter of ∼12 nm that constitute the suprastructured particles. Magnetic circular dichroism (MCD) measurements at magnetic fields of 1.5 mT showed distinct chiral magneto-optical activity from charge transfer transitions of magnetite in the visible range. For the supraparticles with lower crystallinity, the MCD peaks in the 250-550 nm range assigned as the ligand-to-metal charge transfer (LMCT) and the inter-sublattice charge transfer (ISCT) show increased intensities in comparison to those with higher crystallinity samples. On the contrary, the higher crystallinity sample shows higher MCD intensities near 600-700 nm for the intervalence charge transfer (IVCT) transition. The differences in MCD responses can be attributed to the crystallinity determined by the reaction time, lattice distortion near grain boundaries of the constituent nanocrystals, and dipolar interactions in the supra-assembled structures.

We report the improvement in the sensing performance of electrolyte-gated graphene field-effect transistor (FET) sensors capable of detecting tau protein through a simplified, linker-free, anti-tau antibody immobilization process. For most of the graphene-based immunosensor, linkers, such as pyrenebutanoic acid, succinimidyl ester (PSE) must be used to the graphene surface, while the other side of linkers serves to capture the antibodies that can specifically interact with the target biomarker. In this study, graphene was patterned into eight different types and linker-free patterned graphene FET sensors were fabricated to verify their detection performance. The linker-free antibody immobilization to patterned graphene exhibited that the antibody was immobilized to the edge defect and had a doping-like behaviors on graphene. As the tau protein concentration in the electrolyte increased from 10 fg/ml to 1 ng/ml, the performances, charge neutral point shift and current change rate of the patterned graphene sensors without linkers were enhanced 2-3 times compared to a pristine graphene sensor with the PSE linker. Moreover, tau protein in the plasma of five Alzheimer's disease patients was measured using a linker-free patterned graphene sensor. It shows a 3-4 times higher current change rate than that of pristine graphene sensor with the PSE linker. Since the antibody is immobilized directly without a linker, a patterned graphene sensor without a linker can operate more sensitively in higher ionic concentration electrolyte., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

Organic-inorganic hybrid perovskites hold great potential for various optoelectronic devices with exceptional properties. Although the direct generation of circularly polarized emission from perovskites would enable various compact devices, achieving a large degree of circular polarization (DCP) at room temperature still remains challenging. Herein, we demonstrate that DCP can be strongly enhanced at the narrow mode position of chiral Fano resonances. In our design, a perovskite film is spin-coated on a symmetry-broken structure with a relatively large feature size. A large DCP of more than 0.5 is achieved at room temperature without the direct patterning of the perovskite layer. Reciprocity calculation reveals that chiral field enhancement enables the emission of opposite helicity to couple into counter-propagating slab modes and leads to a large DCP. Our design is very general and scalable. Our work may lead to circularly polarized light sources based on various perovskite materials.

For organ transplantation patients, the therapeutic drug monitoring (TDM) of immunosuppressive drugs is essential to prevent the toxicity or rejection of the organ. Currently, TDM is done by immunoassays or liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods; however, these methods lack specificity or are expensive, require high levels of skill, and offer limited sample throughput. Although matrix-assisted (MA) laser desorption ionization (LDI) mass spectrometry (MS) can provide enhanced throughput and cost-effectiveness, its application in TDM is limited due to the limitations of the matrixes such as a lack of sensitivity and reproducibility. Here, we present an alternative quantification method for the TDM of the immunosuppressive drugs in the blood of organ transplant patients by utilizing laser desorption ionization mass spectrometry (LDI-MS) based on a tungsten disulfide nanosheet, which is well-known for its excellent physicochemical properties such as a strong UV absorbance and high electron mobility. By adopting a microliquid inkjet printing system, a high-throughput analysis of the blood samples with enhanced sensitivity and reproducibility was achieved. Furthermore, up to 80 cases of patient samples were analyzed and the results were compared with those of LC-MS/MS by using Passing-Bablok regression and Bland-Altman analysis to demonstrate that our LDI-MS platform is suitable to replace current TDM techniques. Our approach will facilitate the rapid and accurate analysis of blood samples from a large number of patients for immunosuppressive drug prescriptions.

Shear alignment of the block copolymer (BCP) thin film is one of the promising directed self-assembly (DSA) methodologies for the unidirectional alignment of sub-10 nm microdomains of BCPs for next-generation nanolithography and nanowire-grid polarizers. However, because of the differences in the surface/interfacial energies at the top surface/bottom interface, the shear-induced ordering of BCP nanopatterns has been restricted to BCPs with spherical and cylindrical nanopatterns and cannot be realized for high-aspect-ratio perpendicular lamellar structures, which is essential for practical application to semiconductor pattern processes. It is still a difficult challenge to fabricate the unidirectional alignment in a short time over a large area. In this study, we propose an approach for combining the shear-rolling process with the filtered plasma treatment of BCP films for the fabrication of unidirectionally aligned and perpendicularly oriented lamellar nanostructures. This approach enables fabrication within 1 min on a 4 in scale. We treated filtered plasma on the BCP film for perpendicular orientation and executed the hot-rolling process with different roller and stage speeds. Large-scale shear was generated only at the location where the BCP film was in contact with both the roller and stage, effectively applying shear stress to a large area of the BCP film within a short time. The repeated application of this shear-rolling process can achieve a higher level of unidirectional alignment. Our aligned BCP vertical lamellae were used to fabricate a high-aspect-ratio sub-10-nm-wide metallic nanowire array via dry/wet processes. In addition, shear-rolling with chemoepitaxy patterns can achieve higher orientational order and lower defectivity.

To date, the light emitting diode (LED) based halide perovskite was rapidly developed due to the outstanding property of perovskite materials. However, the blue perovskite LEDs based on the bulk halide perovskites have been rarely researched and showed low efficiencies. The bulk blue perovskite LEDs suffered from insufficient coverage on the substrate due to the low solubility of the inorganic Cl sources or damaged by the structural instability with participation of organic cations. Here, we show the new method of fabricating stable inorganic bulk blue perovskite LEDs with the anion exchange approach to avoid use of insoluble Cl precursors. The devices showed nice operational spectral stability at the desired blue emission peak. The bulk perovskite blue LEDs showed a maximum luminance of 1468 and 494 cd m -2 for the 490 and 470 nm emission peaks, respectively.

Silica nanoparticles (SiO 2 NPs) are commonly used in medical and pharmaceutical fields. Research into the cytotoxicity and overall proteomic changes occurring during initial exposure to SiO 2 NPs is limited. We investigated the mechanism of toxicity in human liver cells according to exposure time [0, 4, 10, and 16 h (h)] to SiO 2 NPs through proteomic analysis using mass spectrometry. SiO 2 NP-induced cytotoxicity through various pathways in HepG2 cells. Interestingly, when cells were exposed to SiO 2 NPs for 4 h, the morphology of the cells remained intact, while the expression of proteins involved in mRNA splicing, cell cycle, and mitochondrial function was significantly downregulated. These results show that the toxicity of the nanoparticles affects protein expression even if there is no change in cell morphology at the beginning of exposure to SiO 2 NPs. The levels of reactive oxygen species changed significantly after 10 h of exposure to SiO 2 NPs, and the expression of proteins associated with oxidative phosphorylation, as well as the immune system, was upregulated. Eventually, these changes in protein expression induced HepG2 cell death. This study provides insights into cytotoxicity evaluation at early stages of exposure to SiO 2 NPs through in vitro experiments.

With the miniaturization of personal wearable electronics, considerable effort has been expended to develop high-performance flexible/stretchable energy storage devices for powering integrated active devices. Supercapacitors can fulfill this role owing to their simple structures, high power density, and cyclic stability. Moreover, a high electrochemical performance can be achieved with flexible/stretchable supercapacitors, whose applications can be expanded through the introduction of additional novel functionalities. Here, recent advances in and future prospects for flexible/stretchable supercapacitors with innate functionalities are covered, including biodegradability, self-healing, shape memory, energy harvesting, and electrochromic and temperature tolerance, which can contribute to reducing e-waste, ensuring device integrity and performance, enabling device self-charging following exposure to surrounding stimuli, displaying the charge status, and maintaining the performance under a wide range of temperatures. Finally, the challenges and perspectives of high-performance all-in-one wearable systems with integrated functional supercapacitors for future practical application are discussed., (© 2020 Wiley-VCH GmbH.)

Nanomaterials form a complex called "protein corona" by contacting with protein-containing biological fluids such as serum when they are exposed to physiological environments. The characteristics of these proteins, which are one of the substantial factors in cellular response, are affected by the interactions between the nanomaterials and the biological systems. Many studies have investigated the biological behaviors of nanomaterials by conducting experiments in vitro and in vivo; however, the origin of the biological materials used is rather inconsistent. This is due to the fact that the composition of the protein coronas may differ depending on the animal origin, not on the composition or size of the nanoparticles. The resulting differences in the composition of the protein coronas can lead to different conclusions. To identify the differences in protein corona formation among sera of different species, we investigated protein coronas of gold and silica nanoparticles in serum obtained from various species. Using comparative proteomic analysis, common proteins adsorbed onto each nanoparticle among the three different sera were identified as highly abundant proteins in the serum. These findings indicate that protein corona formation is dependent on the serum population rather than the size or type of the nanoparticles. Additionally, in the physiological classification of protein coronas, human serum (HS) was found to be rich in apolipoproteins. In conclusion, our data indicate that HS components are different from those of bovine or mouse, indicating that the serum species origin should be carefully considered when selecting a biological fluid.

Though halide perovskite nanocrystal (PeNC) based blue light emitting devices have been improved in the last few years, and the reasons for the improvements have been successfully explained, the origin of the narrow emission spectra of PeNCs have not been studied much. Here, the factors that affect the width of the emission spectra of PeNCs are analyzed with controlled synthesis and surface passivation treatment. The overall spectra are governed by the size of PeNCs; however, the width could be narrowed by surface passivation treatment. The anion passivation effect of the surface passivation improved most of optoelectronic properties, but had less effect on the emission spectra width. The narrower emission spectra of PeNCs are obtained by ligand passivation effect of the surface passivation. Light emitting devices with enhanced optoelectronic properties are successfully fabricated and narrow (0.094 eV, 16.72 nm) blue electroluminescence emission spectra (∼470 nm) are obtained.

In place of functional groups that impose different inductive effects, we immobilize molecules carrying thiol groups on a gold electrode. By applying different voltages, the properties of the immobilized molecules can be tuned. The base-catalyzed saponification of benzoic esters is fully inhibited by applying a mildly negative voltage of -0.25 volt versus open circuit potential. Furthermore, the rate of a Suzuki-Miyaura cross-coupling reaction can be changed by applying a voltage when the arylhalide substrate is immobilized on a gold electrode. Finally, a two-step carboxylic acid amidation is shown to benefit from a switch in applied voltage between addition of a carbodiimide coupling reagent and introduction of the amine., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

Chemical characterizations of biochemically functionalized single nanoparticles are necessary to optimize the nanoparticle surface functionality in recently advanced nanobiological applications but have not yet been fully explored because of technical difficulties. Exploiting the photoinduced force exerted on a light-illuminated nanoscale tip, nanoscale mid-infrared hyperspectral images with a 10 nm spatial resolution of a monolayer ligand-functionalized single gold nanoparticle under ambient and environmental conditions are presented. We extend our study to the diagnosis of nanoscale heterogeneous chemical contaminants which come from a particle functionalization process but are undetectable in conventional ensemble-averaged imaging technique. High sensitivity and high spatial resolution are achieved via the strongly localized tip-enhanced force at the junction between the gold-coated tip and the functionalized nanoparticle in photoinduced force microscopy, which far exceeds the capability of the conventional methods. The present study paves a new way to directly detect heterogeneous nanochemicals at the single-component level, which is necessary to evaluate nanomaterial safety in biomedical applications.

Nanoparticles (NPs) are substances between 1 and 100 nm in size. They have been the subject of numerous studies because of their potential applications in a wide range of fields such as cosmetics, electronics, medicine, and food. For biological applications of nanoparticles, they are usually coated with a substance capable of preventing agglomeration of the nanoparticles and nonspecific binding and exhibiting water-solubility characteristics with specific immobilized (bio)molecules. In order to evaluate the chemical properties of the surface-modified nanoparticles for bioapplications, including drug delivery, a simple and reliable method for the analysis of the presence of the surface chemicals and the ligand states of the nanoparticles is necessary. In this study, the authors numerically evaluated the extent of polyethylene glycol (PEG) ligand conjugation on AuNPs by concurrently adopting a microliquid inkjet printing system for sampling of the PEGylated AuNPs solution and ToF-SIMS imaging together with statistical analysis. The statistical correlation values calculated from the signals of PEG and Au measured by ToF-SIMS imaging on the sample spots made by a microliquid inkjet printing system showed better reproducibility and improved correlation values compared to the pipet spotting. Their improved method will be useful to evaluate ligand-conjugated nanoparticles for quality control of each conjugation process.

Since Ar-gas cluster ion beams (Ar-GCIBs) have been introduced into time-of-flight secondary ion mass spectrometry (ToF-SIMS), there have been various attempts to analyze organic materials and biomolecules that require low-damage analysis and high sensitivity, because Ar-GCIBs allow soft ionization of large molecules such as peptides and proteins due to the low energy per atom. Here, the authors adopted the Ar-GCIB as a primary beam to detect proteins including human insulin, ubiquitin, and cytochrome C (molecular weights are 5808, 8564, and 12 327 Da, respectively). They have confirmed that the detection of the intact proteins was possible when the Ar-GCIB was used as a primary ion beam. In addition, they successfully identified each protein by analyzing the trypsin-digested peptides in myoglobin, cytochrome C, and bovine serum albumin. They also attempted on-surface enzymatic digestion to identify proteins on the surface of the Si wafer and obtained results identical to those of in-solution digestion. It is expected that the authors' on-surface digestion method can enable the application of ToF-SIMS for the analysis of proteins present in biological tissues.

Stretchable energy storage devices are of great interest because of their potential applications in body-friendly, skin-like, wearable devices. However, stretchable batteries are very challenging to fabricate. The electrodes must have a degree of stretchability because the active materials occupy most of the volume, and the separator and packaging should also be stretchable. Here, an all-component stretchable lithium-ion battery was realized by leveraging the structural stretchability of re-entrant micro-honeycomb graphene-carbon nanotube (CNT)/active material composite electrodes and a physically cross-linked gel electrolyte, without using an inactive elastomeric substrate or matrix. Active materials interconnected via the entangled CNT and graphene sheets provided a mechanically stable porous network framework, and the inwardly protruding framework in the re-entrant honeycomb structure allowed for structural stretching during deformation. The composite network consisting solely of binder-free, highly conductive materials provided superior electron transfer, and vertically aligned microchannels enabled facile ion transport. Additionally, the physically cross-linked gel electrolyte increased the mechanical stability upon deformation of the electrodes and was effective as a stretchable separator. The resulting stretchable battery showed a high areal capacity of 5.05 mAh·cm -2 , superior electrochemical performance up to 50% strain under repeated (up to 500) stretch-release cycles, and long-term stability of 95.7% after 100 cycles in air conditions.

Silkworm, Bombyx mori , contains high amounts of beneficial nutrients, including amino acids, proteins, essential minerals, and omega-3 fatty acids. We have previously reported a technique for producing steamed and freeze-dried mature silkworm larval powder (SMSP), which makes it easier to digest mature silkworm. In this study, we investigated the preventive effects of SMSP on alcoholic fatty liver disease and elucidated its mechanism of action. Male Sprague-Dawley rats treated with SMSP (50 mg/kg) or normal diet (AIN-76A) were administered 25% ethanol (3 g/kg body weight) by oral gavage for 4 weeks. SMSP administration for 4 weeks significantly decreased hepatic fat accumulation in ethanol-treated rats by modulating lipogenesis and fatty acid oxidation-related molecules such as sirtuin 1, AMP-activated protein kinase, and acetyl-CoA carboxylase 1. Moreover, SMSP administration significantly diminished the levels of triglyceride in liver tissues by as much as 35%, as well as lowering the serum levels of triglyceride, gamma glutamyl transpeptidase, alanine transaminase, and aspartate aminotransferase in ethanol-treated rats. SMSP supplementation also decreased the pro-inflammatory tumor necrosis factor-alpha and interleukin 1 beta levels and cytochrome P450 2E1 generating oxidative stress. These results suggest that SMSP administration may be possible for the prevention of alcoholic liver disease.

Hepatocellular carcinoma (HCC) is the leading cause of cancer-related deaths worldwide and the majority of HCC patients occur with a background of hepatic fibrosis and cirrhosis. We have previously reported the hepatoprotective effects of steamed and freeze-dried mature silkworm larval powder (SMSP) in a chronic ethanol-treated rat model. Here, we assessed the anti-fibrotic and anti-carcinogenic effects of SMSP on diethylnitrosamine (DEN)-treated rats. Wistar rats were intraperitoneally injected with DEN once a week for 12 or 16 weeks with or without SMSP administration (0.1 and 1 g/kg). SMSP administration significantly attenuated tumor foci formation and proliferation in the livers of the rats treated with DEN for 16 weeks. SMSP administration also inhibited hepatic fibrosis by decreasing the levels of collagen fiber and the expression of pro-collagen I and alpha-smooth muscle actin (α-SMA). Moreover, SMSP supplementation improved the major parameters of fibrosis such as transforming growth factor-β (TGF-β), connective tissue growth factor (CTGF), tumor necrosis factor-alpha (TNF-α), plasminogen activator inhibitor-1 (PAI-1), and collagen type I (Col1A1) in the livers from the rats treated with DEN for 16 weeks. As s possible mechanisms, we investigated the effects of SMSP on the TGF-β and signal transducer and activator of transcription 3 (STAT3)-mediated signaling cascades, which are known to promote hepatic fibrosis. We found that SMSP treatment inhibited the activation of TGF-β and the phosphorylation of STAT3 pathway in DEN-treated rats. Moreover, SMSP administration suppressed the expressions of the target genes of TGF-β and STAT3 induced by DEN treatment. Our findings provide experimental evidences that SMSP administration has inhibitory effects of hepatic fibrosis and HCC induced by DEN in vivo and could be a promising strategy for the prevention or treatment of hepatic fibrosis and hepatocellular carcinogenesis., Competing Interests: The authors declare no conflict of interest.

Transfer methods to displace active functional layers onto desired surfaces have been developed for the fabrication of nanostructured thin film devices. However, multiple transfers with highly polar surfaces were not yet fully demonstrated presumably due to difficulty in the control of the competitive adhesions at interfaces. In this study, we present adhesion-assisted multiple transfer methods for the fabrication of highly ordered nanolaminated structures with layer-by-layer (LbL) assembled films composed of various functional nanomaterials. The interfacial adhesions were controlled with adhesive layers having a thickness of only 2.5 nm for the successful transfer of the LbL nanofunctional films from the donor substrates to the receiver substrates, which was determined mainly by the major functional moieties at the contact surfaces. The root-mean-square roughness should be lower than 200 nm for conformal contact in the transfer. The versatility of the proposed method was demonstrated with various functional Au, silica, ZnO, and TiO 2 nanoparticles as constituent materials and various types of substrates including Si wafer, glass, and polyethylene terephthalate surfaces. The fabricated films with periodic depositions of two different materials could exhibit photoreflective properties with high-order reflection peaks, which were simply tunable by adjusting the order in the multiple transfer. This transfer method could effectively reduce the cost and time in the nanofabrication as it did not require costly equipment, harsh synthesis conditions, and hazardous solvents.

Copolymerization of sulfur, which forms sulfur-rich polymers, has recently opened a new era in the lithium-sulfur (Li-S) battery research as improved battery performances could be achieved compared to pure sulfur (S 8 ). By means of organic chemistry, sulfur copolymers with desired features and chemical structures could be rationally designed and synthesized. In this study, sulfur-rich polymers consisting of short-chain tetrasulfide (R-S 4 -R) (PTS) and selenotrisulfide (R-SeS 3 -R) (PTSeS) bonds are suggested as cathode materials for Li-S batteries. Intrinsically short poly(seleno)sulfide bonds along with covalent anchoring effect effectively suppress the parasitic shuttle effect originating from soluble long-chain lithium polysulfides formed from pure S 8 . Furthermore, a comparative study demonstrates the indisputable advantage of the selenium doping, which enhances the electrical conductivity of the polymer and following battery performances. In terms of cycling performance, both PTSeS and PTS with ∼2 mg cm -2 polymer loading exhibit small capacity decays of 0.078 and 0.052% per cycle until 500 cycles at 0.5C, respectively. However, active material utilization and high rate performance are substantially superior in PTSeS due to the enhanced electron transfer kinetics. This work would provide useful design principles for fabrication of sulfur-based polymers with even greater applicability in future Li-S batteries.

Sub-10 nm patterns prepared by directed self-assembly (DSA) of block copolymer (BCP) thin films offer a breakthrough method to overcome the limitations of photolithography. Perpendicular orientation of the BCP nanostructures is essential for lithographic applications, but dissimilar surface/interfacial energies of two blocks generally favour parallel orientations, so that the perpendicular orientation could only be obtained under very limited conditions. Here, we introduce a generalized method for creating perpendicular orientations by filtered plasma treatment of the BCP films. By cross-linking the surface of disordered BCP films using only physical collisions of neutral species without ion bombardment or UV irradiation, neutral layers consistent with the BCP volume fraction are produced that promote the perpendicular orientations. This method works with BCPs of various types, volume fractions, and molecular weights individually at the top and bottom interfaces, so it was applied to orientation-controlled 3D multilayer structures and DSA processes for sub-10 nm line-spacing patterns.

: Although cancer stem cells (CSC) are thought to be responsible for tumor recurrence and resistance to chemotherapy, CSC-related research and drug development have been hampered by the limited supply of diverse, patient-derived CSC. Here, we present a functional polymer thin film (PTF) platform that promotes conversion of cancer cells to highly tumorigenic three-dimensional (3D) spheroids without the use of biochemical or genetic manipulations. Culturing various human cancer cells on the specific PTF, poly(2,4,6,8-tetravinyl-2,4,6,8-tetramethyl cyclotetrasiloxane) (pV4D4), gave rise to numerous multicellular tumor spheroids within 24 hours with high efficiency and reproducibility. Cancer cells in the resulting spheroids showed a significant increase in the expression of CSC-associated genes and acquired increased drug resistance compared with two-dimensional monolayer-cultured controls. These spheroids also exhibited enhanced xenograft tumor-forming ability and metastatic capacity in nude mice. By enabling the generation of tumorigenic spheroids from diverse cancer cells, the surface platform described here harbors the potential to contribute to CSC-related basic research and drug development. SIGNIFICANCE: A new cell culture technology enables highly tumorigenic 3D spheroids to be easily generated from various cancer cell sources in the common laboratory., (©2018 American Association for Cancer Research.)

The fatigue resistance of piezoelectric PVDF has been under question in recent years. While some report that a significant degradation occurs after 10⁶ cycles of repeated voltage input, others report that the reported degradation originates from the degraded metal electrodes instead of the piezoelectric PVDF itself. Here, we report the piezoelectric response and remnant polarization of PVDF during 10⁷ cycles of repeated compression and tension, with silver paste-based electrodes to eliminate any electrode effect. After applying repeated tension and compression of 1.8% for 10⁷ times, we do not observe any notable decrease in the output voltage generated by PVDF layers. The results from tension experiments show stable remnant polarization of 5.5 μC/cm², however, the remnant polarization measured after repeated compression exhibits a 7% decrease as opposed to the tensed PVDF. These results suggest a possible anisotropic response to stress direction. The phase analyses by Raman spectroscopy reveals no significant change in the phase content, demonstrating the fatigue resistance of PVDF.

Long-term operation of wearable pressure sensors to detect body movement requires self-powered human-based energy sources to minimize the need for recharging. Recently, pressure sensors with thermoelectric properties based on conducting polymers have been reported; however, these devices are limited in their ability to simultaneously achieve sufficient power generation and sensitivity of the sensor. In this article, we suggest a coaxial strut structure of poly(styrene-ethylene/butylene-styrene)(SEBS)-poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)-melamine foam (MF) with a fractured microstructure for a highly sensitive, efficient self-powered pressure sensor. In the coaxial struts, the MF core provides a compressible and elastic framework; the intermediate PEDOT:PSS acts as a conductor and a thermoelectric material; and the SEBS shell ensures mechanical stability and resilience to stabilize the brittle PEDOT:PSS layer under high loading conditions. Additionally, by compressing the coaxial foam to 1/20, partial microfracture of PEDOT:PSS occurs only in the SEBS shell; thus, the pressure sensitivity increases significantly while maintaining high conductivity and thermoelectric performance. The coaxial foam was assembled into a wearable TEG to generate 338 nW from the forearms and demonstrate the high sensitivity of pressure sensors without an external power supply.