Search

The ratio of poly(lactic acid) (PLA), poly(butylene adipate-co-terephthalate) (PBAT), and calcium carbonate (CaCO3) fillers in PLA/PBAT/CaCO3 composites was set at 90/10/5, 70/30/5, and 30/70/5. The effect of nano- and micro-CaCO3 on the melting and crystallization performance of the composites was investigated by differential scanning calorimetry. PLA crystallization was related to the PLA and PBAT ratio, cooling rate, and CaCO3 particle size in PLA/PBAT/CaCO3 composites. Nano-CaCO3 prevented the crystallization of PLA in PLA/PBAT/CaCO3 90/10/5 and 70/30/5 but did not prevent the crystallization of PLA in PLA/PBAT/CaCO3 30/70/5. Unlike nano-CaCO3, micro-CaCO3 did not prevent PLA crystallization regardless of the PLA and PBAT ratio. Nano- and micro-CaCO3 enhance PLA90 and PLA70 to some extent, due to the aggregation and dissociation of the CaCO3 filler in polylactic acid. But nano- and micro-CaCO3 improved the mechanical properties of PLA30 several times, due to the good compatibility of the CaCO3 filler and PBAT. The effect of nano-CaCO3 and micro-CaCO3 on the mechanical properties of PLA/PBAT/CaCO3 composites had no significant difference.

Photo-assisted single-chamber microbial electrolysis cells (MECs) incorporating semiconductor cathodes are attractively promising for exclusive hydrogen without CH4 and CO2. However, the unsustainable, high cost, and unstable metal catalysts on the cathodes along with the intricacies behind the interplay of circuital current, light illumination, and bacterial communities on both electrodes are poorly understood. Herein, photo-assisted single-chamber MECs incorporating ZnFe2O4/g-C3N4 cathodes are demonstrated to achieve efficient production of exclusive hydrogen (0.11 ± 0.01 m3/m2/day; 1.70 ± 0.04 m3/m3/day) with a solar-to-hydrogen conversion efficiency of 4.08 ± 0.17% and an energy efficiency relative to electrical input of 233 ± 5%. The ZnFe2O4/g-C3N4 structured cathodes exhibited appreciable higher photocurrents than the controls (g-C3N4: 4.3-fold; ZnFe2O4: 3.3-fold), and negligible leaking of Fe and Zn after the 4th-cycle operation. Circuital current and light illumination were proven to varying degree shape both electrodes for building up functional bacterial communities with metabolic regulation at the prolonged operation of 12 batch cycles. Energy metabolism and carbohydrate metabolism along with membrane transport, signal transduction, and cell motility based on PICRUSt functional prediction further confirmed the photo-assisted single-chamber MECs for efficient hydrogen production. This study provided a sustainable, cost-effective, and efficient approach for achieving high rates of exclusive hydrogen production and offered new insights for ingenious interplay of circuital current, light illumination, and bacterial communities for efficient hydrogen production in the photo-assisted single-chamber MECs. Key points: • ZnFe2O4/g-C3N4cathodes of single-chamber MECs achieve efficient H2production. • Light irradiation and circuit current shape bacterial communities on both electrodes. • Circuital current contributes to less leaking of Fe and Zn, and thus system stability. [ABSTRACT FROM AUTHOR]