Search

Heng Zhao,1,* Li-Dan Zhang,2,* Li-Fang Liu,1 Chun-Qing Li,3 Wei-Li Song,3 Yong-Yang Pang,1 Yun-Liang Zhang,1 Dan Li4 1Endocrinology Laboratory, The First Central Hospital of Baoding, Baoding, Hebei Province, 071000, People’s Republic of China; 2Department of Nuclear Medicine, The First Central Hospital of Baoding, Baoding, Hebei Province, 071000, People’s Republic of China; 3Outpatient Department, The First Central Hospital of Baoding, Baoding, Hebei Province, 071000, People’s Republic of China; 4Department of Ophthalmology, Affiliated Hospital of Hebei University, Baoding, Hebei Province, 071000, People’s Republic of China*These authors contributed equally to this workCorrespondence: Dan LiDepartment of Ophthalmology, Affiliated Hospital of Hebei University, Baoding, Hebei Province, 071000, People’s Republic of ChinaTel +86 189 31251885Fax +86 031 25981539Email drli_ld@163.comYun-Liang ZhangEndocrinology Laboratory, The First Central Hospital of Baoding, Baoding, Hebei Province, 071000, People’s Republic of ChinaTel +86 137 31251133Fax +86 0312-5976520Email zyl_zhang98@163.comPurpose: This study aimed to describe the levels of glycated hemoglobin (HbA1c), D-dimer (D-D), and fibrinogen (FIB) in different types of diabetic retinopathy (DR).Methods: A total of 61 patients with diabetes, who were treated in our department between November 2017 and May 2019, were selected. According to their non-mydriatic fundus photography and fundus angiography results, patients were divided into three groups, ie, the non-DR (NDR) group (n=23), the non-proliferative DR (NPDR) group (n=17), and the proliferative DR (PDR) group (n=21). A control group of 20 people who had tested negative for diabetes was also included. The levels of HbA1c, D-D, and FIB were measured and compared, respectively.Results: The mean values of HbA1c were 6.8% (5.2%, 7.7%), 7.4% (5.8%, 9.0%), and 8.5% (6.3%, 9.7%) in the NDR, NPDR, and PDR groups, respectively. The control group values were 4.9% (4.1%, 5.8%). These results indicated a significant statistical difference between groups. The mean values of D-D were 0.39 ± 0.21 mg/L, 1.06 ± 0.54 mg/L, and 1.39 ± 0.59 mg/L in the NDR, NPDR, and PDR groups, respectively. The control group result was 0.36 ± 0.17 mg/L. The values of the NPDR and PDR groups were significantly higher than those of the NDR and control groups, and the value of the PDR group was significantly higher than that of the NPDR group, indicating a significant difference between the groups (P < 0.001). The mean values of FIB were 3.07 ± 0.42 g/L, 4.38 ± 0.54 g/L, and 4.46 ± 1.09 g/L in the NDR, NPDR, and PDR groups, respectively. The control group result was 2.97 ± 0.67 g/L. The difference between the groups was statistically significant (P < 0.05).Conclusion: Blood levels of HbA1c, D-D, and FIB in the PDR group were significantly higher than in the NPDR group.Keywords: glycated hemoglobin, HbA1c, D-dimer, D-D, fibrinogen, FIB, diabetic retinopathy, DR, microangiopathy

The clinical use of niacin to treat dyslipidemic conditions is limited by noxious side effects, most commonly facial flushing. In mice, niacin-induced flushing results from COX-1-dependent formation of PGD₂ and PGE₂ followed by COX-2-dependent production of PGE₂. Consistent with this, niacin-induced flushing in humans is attenuated when niacin is combined with an antagonist of the PGD₂ receptor DP1. NSAID-mediated suppression of COX-2-derived PGI₂ has negative cardiovascular consequences, yet little is known about the cardiovascular biology of PGD₂. Here, we show that PGD₂ biosynthesis is augmented during platelet activation in humans and, although vascular expression of DP1 is conserved between humans and mice, platelet DP1 is not present in mice. Despite this, DP1 deletion in mice augmented aneurysm formation and the hypertensive response to Ang II and accelerated atherogenesis and thrombogenesis. Furthermore, COX inhibitors in humans, as well as platelet depletion, COX-1 knockdown, and COX-2 deletion in mice, revealed that niacin evoked platelet COX-1-derived PGD₂ biosynthesis. Finally, ADP-induced spreading on fibrinogen was augmented by niacin in washed human platelets, coincident with increased thromboxane (Tx) formation. However, in platelet-rich plasma, where formation of both Tx and PGD₂ was increased, spreading was not as pronounced and was inhibited by DP1 activation. Thus, PGD₂, like PGI₂, may function as a homeostatic response to thrombogenic and hypertensive stimuli and may have particular relevance as a constraint on platelets during niacin therapy. [ABSTRACT FROM AUTHOR]

As a promising solution for solid-state batteries with high energy density and safety, understanding the mechanism of fast ion conduction in polymer-ceramic composite solid-state electrolytes (CSEs) is still a challenging task. Herein, we understand the enhanced ion conduction in CSEs using a series of ionic spectra. Ionic insight is extended to ion conduction in CSEs, resolving the mechanism of fast ion migration. With the cooperation of enhanced interface and filler ion conduction, the CSE with a conductive filler exhibits ionic conductivity higher than that of CSEs with insulating fillers. Volume and filler strategies of CSE design are proposed based on volcanic maps of conductivity. An equivalent circuit is established to describe the conduction mechanism of CSEs. Specifically, R interface and R filler are in parallel to describe the cooperation of interface and filler conduction. They are in series with R bulk , which represents a competition between the fundamental matrix and enhanced interface conduction. The proposed conduction model is verified though the energy storage performance of solid-state batteries; a fast dynamic process promises a better rate performance and cycling stability of solid-state batteries. These results provide deep insights into fast ion conduction in ceramic-polymer CSEs, which are indispensable to develop high-performance solid-state batteries.

The positive electrodes of non-aqueous aluminum ion batteries (AIBs) frequently encounter significant issues, for instance, low capacity in graphite (mechanism: anion de/intercalation and large electrode deformation induced) and poor stability in inorganic positive electrodes (mechanism: multi-electron redox reaction and dissolution of active materials induced). Here, metallo-porphyrin compounds (employed Fe 2+ , Co 2+ , Ni 2+ , Cu 2+ , and Zn 2+ as the ion centers) are introduced to effectively enhance both the cycling stability and reversible capacity due to the formation of stable conjugated metal-organic coordination and presence of axially coordinated active sites, respectively. With the regulation of electronic energy levels, the d-orbitals in the redox reactions and electron transfer pathways can be rearranged. The 5,10,15,20-tetraphenyl-21H,23H-porphine nickle(II) (NiTPP) presents the highest specific capacity (177.1 mAh g -1 ), with an increment of 32.1% and 77.1% in comparison with the capacities of H 2 TPP and graphite, respectively, which offers a new route for developing high-capacity positive electrodes for stable AIBs., (© 2024 Wiley‐VCH GmbH.)

The study of myxomycete biogeography has a long-standing history and has consistently drawn scholarly interest. Nevertheless, studies focusing specifically on the spatial and temporal distribution patterns of myxomycete diversity are relatively limited, with even fewer investigating the mechanisms driving the generation and maintenance of myxomycete diversity. Therefore, this study selected two geographically distant sampling sites within northern Chinese forests to investigate myxomycete species composition, community structure, environmental drivers, and assembly patterns under geographic barriers. We established plots in the Altai Mountains (ALE) and the Greater Khingan Mountains (GKM), gathered bark and litter, and conducted 80-day moist chamber cultures of myxomycetes. Additionally, myxomycete specimens were collected in the field simultaneously to supplement the data set. This study collected 541 myxomycete specimens belonging to 73 species from 28 genera, spanning 12 families and eight orders. The ALE and the GKM had 20 identical species, accounting for 27% of the total species. Myxomycetes from both regions exhibited abundant occurrence 18 days after cultivation, with the quantity on bark substrates notably higher than on litter. Arcyria pomiformis and Comatricha elegans were the most common species in moist chamber cultures. Mantel test outcomes revealed that environmental factors had no significant impact on myxomycete community similarity between the two areas, aligning with findings from the neutral community model analysis, indicating a predominant influence of stochastic processes on myxomycete community structure in moist chamber cultures. This study represents the first application of a quantitative framework to analyze myxomycete community assembly cultivated in moist chambers.

Petroleum cokes are largely used as low-cost anodes in aluminum industries and general fuels in cement industries, where large amounts of CO 2 are generated. To reduce CO 2 release, it is challenging to develop green strategies for processing abundant petroleum cokes into high-value products, because there are abundant hetero-atoms in petroleum cokes. To overcome such issues, a sustainable electrochemical approach is proposed to convert ultralow-cost high sulfur petroleum coke and iron powders into high-efficiency catalysts for hydrogen evolution reaction (HER). During molten-salt electrolysis, raw petroleum cokes are converted into CNTs via heteroatom removal and the catalytic effect of Fe, forming Fe 3 C nanoparticles on the sulfur and nitrogen co-dopped carbon nanotubes (Fe 3 C@S, N-CNTs). The electrochemical reaction analysis using the continuum model suggested that the rate-determining step referred to the slow transport of mobile ions inside the porous cathode. Because the self-doped S and N atoms massively alleviated the energy barrier for H * absorption and H 2 desorption (i.e., promoting HER kinetics), the as-prepared Fe 3 C@S, N-CNTs exhibited low overpotentials at 10 mA cm -2 in acidic (96 mV) and alkaline (106 mV) solutions with ultralong-term duration (200 h). This study offers a sustainable approach to convert ultralow-cost petroleum cokes into ultrastable catalysts for high-efficiency HER., (© 2024 Wiley‐VCH GmbH.)

Nonaqueous organic aluminum batteries are considered as promising high-safety energy storage devices due to stable ionic liquid electrolytes and Al metals. However, the stability and capacity of organic positive electrodes are limited by their inherent high solubility and low active organic molecules. To address such issues, here porphyrin compounds with rigid molecular structures present stable and reversible capability in electrochemically storing AlCl 2 + . Comparison between the porphyrin molecules with electron-donating groups (TPP-EDG) and with electron-withdrawing groups (TPP-EWG) suggests that EDG is responsible for increasing both highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, resulting in decreased redox potentials. On the other hand, EWG is associated with decreasing both HOMO and LUMO energy levels, leading to promoted redox potentials. EDG and EWG play critical roles in regulating electron density of porphyrin π bond and electrochemical energy storage kinetics behavior. The competitive mechanism between electrochemical redox reaction and de/adsorption processes suggests that TPP-OCH 3 delivers the highest specific capacity ~171.8 mAh g -1 , approaching a record in the organic Al batteries., (© 2024 Wiley-VCH GmbH.)

Elucidating the mechanical forces between two solid surfaces immersed in a communal liquid environment is crucial for understanding and controlling adhesion, friction, and electrochemistry in many technologies. Although traditional models can adequately describe long-range mechanical forces, they require substantial modifications in the nanometric region where electronic effects become important. A hybrid quantum-classical model is employed herein to investigate the separation-dependent disjoining pressure between two metal surfaces immersed in an electrolyte solution under potential control. We find that the pressure between surfaces transits from a long-range electrostatic interaction, attractive or repulsive depending on the charging conditions of surfaces, to a strong short-range van der Waals attraction and then an even strong Pauli repulsion due to the redistribution of electrons. The underlying mechanism of the transition, especially the attractive-repulsive one in the short-range region, is elucidated. This work contributes to the understanding of electrotunable friction and lubrication in a liquid environment., (© 2024 Author(s). Published under an exclusive license by AIP Publishing.)

After Gulielmina was erected and Ophiotheca was resurrected based on some species originally included in Perichaena (Trichiaceae, Trichiales, Myxomyxetes), some specimens from the Herbarium of Fungi of Nanjing Normal University previously identified as Perichaena species were reexamined from morphological and two-gene (nuclear 18S rDNA and elongation factor-1 alpha) phylogenetic perspectives. In this study, two new myxomycete species, Gulielmina subreticulospora and Ophiotheca dictyospora, are described. Gulielmina subreticulospora shows the following character combination: branched plasmodiocarps, single peridium with circular protrusions in the inner surface, capillitium (2.4-)2.8-3.0(-3.4) μm in diameter, spores (7.4-)8.0-8.5(-9.0) μm in diameter and sub-reticulated. Ophiotheca dictyospora shows the following character combination: sessile sporocarps to short plasmodiocarps, single peridium with a densely irregular network and protrusions in the inner surface, capillitium (2.7-)3.5-5.0(-7.1) μm in diameter, uneven, decorated with spines of uneven size, spores (7.7-)8.2-8.6(-9.4) μm in diameter including obviously complete cristate reticulation with serrated edges, with deep and clear grids. Both new taxa were compared with related species and their genetic isolation was statistically tested. Moreover, a comprehensive morphological description and a detailed figure plate are provided for Perichaena verrucifera, and its phylogenetic position is determined., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier GmbH. All rights reserved.)

Four species of myxomycetes (Arcyria pseudodenudata, Diderma europaeum, Lycogala irregulare, and Trichia armillata) new to China were observed via light microscope and scanning electron microscope, and detailed descriptions and illustrations are provided, along with comparisons with related species. Among them, A. pseudodenudata was discovered for the first time outside of the type locality, D. europaeum was discovered for the first time outside of Europe, and L. irregulare and T. armillata were reported again after being named. Phylogenetic analyses based on nuclear 18S rDNA and elongation factor-1 alpha sequences or nuclear 18S rDNA and cytochrome oxidase subunit I sequences was performed to provide a molecular basis for morphological identification. These specimens were deposited in the Herbarium of Fungi of Nanjing Normal University., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A facile strategy for efficient and continuous fabrication of monodisperse gas-core microcapsules with controllable sizes and excellent ultrasound-induced burst performances is developed based on droplet microfluidics and interfacial polymerization. Monodisperse gas-in-oil-in-water (G/O/W) double emulsion droplets with a gas core and monomer-contained oil layer are fabricated in the upstream of a microfluidic device as templates, and then water-soluble monomers are added into the aqueous continuous phase in the downstream to initiate rapid interfacial polymerization at the O/W interfaces to prepare monodisperse gas-in-oil-in-solid (G/O/S) microcapsules with gas cores. The sizes of both microbubbles and G/O/W droplet templates can be precisely controlled by adjusting the gas supply pressure and the fluid flow rates. Due to the very thin shells of G/O/S microcapsules fabricated via interfacial polymerization, the sizes of the resultant G/O/S microcapsules are almost the same as those of the G/O/W droplet templates, and the microcapsules exhibit excellent deformable properties and ultrasound-induced burst performances. The proposed strategy provides a facile and efficient route for controllably and continuously fabricating monodisperse microcapsules with gas cores, which are highly desired for biomedical applications.

Photovoltaic cells (PVs) are able to convert solar energy to electric energy, while energy storage devices are required to be equipped due to the fluctuations of sunlight. However, the electrical connection of PVs and energy storage devices leads to increased energy consumption, and thus energy storage ability and utilization efficiency are decreased. One of the solutions is to explore an integrated photoelectrochemical energy conversion-storage device. Up to date, the integrated photo-rechargeable Li-ion batteries often suffer from unstable photo-active materials and flammable electrolytes under illumination, with concerns in safety risks and limited lifetime. To address the critical issues, here a novel photo-rechargeable aluminum battery (PRAB) is designed with safe ionic liquid electrolytes and stable polyaniline photo-electrodes. The integrated PRAB presents stable operation with an enhanced reversible specific capacity ≈191% under illumination. Meanwhile, a simplified continuum model is established to provide rational guidance for designing electrode structures along with a charging/discharging strategy to meet the practical operation conditions. The as-designed PRAB presents an energy-saving efficiency ≈61.92% upon charging and an energy output increment ≈31.25% during discharging under illumination. The strategy of designing and fabricating stable and safe photo-rechargeable non-aqueous Al batteries highlights the pathway for substantially promoting the utilization efficiency of solar energy., (© 2024 Wiley‐VCH GmbH.)

The liquid-phase mass transport is the key factor affecting battery stability. The influencing mechanism of liquid-phase mass transport in the separators is still not clear, the internal environment being a complex multi-field during the service life of lithium-ion batteries. The liquid-phase mass transport in the separators is related to the microstructure of the separator and the physicochemical properties of electrolytes. Here, in-situ local electrochemical impedance spectra were developed to investigate local inhomogeneities in the mass transfer process of lithium-ion batteries. The geometric microstructure of the separator significantly impacts the mass transfer process, with a reduction in porosity leading to increased overpotentials. A competitive relationship among porosity, tortuosity, and membrane thickness in the geometric parameters of the separator were established, resulting in a peak of polarization. The resistance of the liquid-phase mass transfer process is positively correlated with the viscosity of the electrolyte, hindering ion migration due to high viscosity. Polarization is closely related to the electrochemical performance, so a phase diagram of battery performance and inhomogeneous mass transfer was developed to guide the design of the battery. This study provides a foundation for the development of high stability lithium-ion batteries., (© 2024 Wiley-VCH GmbH.)

A new myxomycete species, Arcyria similaris , was reported herein. The specimens were found and collected in the field on dead bark from Jingangtai National Geopark in Henan Province of China. This species has distinct and unique morphological characteristics, including dark grayish olive sporothecae that fade to smoke gray with age, shallow saucer-shaped cups with marked reticulations and thick papillae on the inner surface, a netted capillitium with many bulges, uniformly marked with low, dense, and irregular reticulations, and spores (8.0-)9.3-10.1(-10.9) μm in diameter, marked with sparse small warts and grouped prominent warts. Apart from a comprehensive morphological study, partial sequences of the nuclear 18S rDNA and elongation factor-1 alpha ( EF-1α ) genes were also provided in this study. This new species was described and illustrated morphologically. The specimens are deposited in the Herbarium of Fungi of Nanjing Normal University (HFNNU).

Objective: To establish a high performance liquid chromatography method for the simultaneous determination of dimethyl oxalate (DMO) and diethyl oxalate (DEO) in workplace air. Methods: From January 2022 to January 2023, air samples were collected by silica gel tubes, desorbed by acetonitrile, separated by C18 chromatographic column, detected by photo-array detector, and retention time was used to characterize and peak area was used to quantify at 210 nm wavelength. Results: The linear relationships of DMO and DEO were good, r >0.999. The detection limits of DMO and DEO were 0.39 and 0.52 μg/ml, respectively. The quantitative limit was 1.28 μg/ml for DMO and 1.72 μg/ml for DEO. Average desorption efficiency for DMO was 82.40%-92.72%, and DEO was 94.13%-97.69%. The intra-assay precision of DMO was 1.87%-6.18%, and DEO was 2.25%-3.31%. Inter-assay precision of DMO was 3.29%-5.73%, and DEO was 1.38%-2.94%. Average sampling efficiencies were 100% for both DMO and DEO. Breakthrough capacity of DMO was 37.61 mg (200 mg solid adsorbent), DEO was >28.11 mg (200 mg solid adsorbent). Samples should be stored at 4 ℃ for at least 7 days. Conclusion: This method is easy to operate and has strong practicability. All indicators meet the requirements of the specification, and it is suitable for the simultaneous determination of DMO and DEO in the workplace air.

The quantum battery (QB) makes use of quantum effects to store and supply energy, which may outperform its classical counterpart. However, there are two challenges in this field. One is that the environment-induced decoherence causes the energy loss and aging of the QB, the other is that the decreasing of the charger-QB coupling strength with increasing their distance makes the charging of the QB become inefficient. Here, we propose a QB scheme to realize a remote charging via coupling the QB and the charger to a rectangular hollow metal waveguide. It is found that an ideal charging is realized as long as two bound states are formed in the energy spectrum of the total system consisting of the QB, the charger, and the electromagnetic environment in the waveguide. Using the constructive role of the decoherence, our QB is immune to the aging. Additionally, without resorting to the direct charger-QB interaction, our scheme works in a way of long-range and wireless-like charging. Effectively overcoming the two challenges, our result supplies an insightful guideline to the practical realization of the QB by reservoir engineering.

Main Conclusion: The oxidosqualene cyclases (OSCs) generating triterpenoid skeletons in Cyclocarya paliurus were identified for the first time, and two uridine diphosphate (UDP)-glycosyltransferases (UGTs) catalyzing the glycosylation of flavonoids were characterized. Cyclocarya paliurus, a native rare dicotyledonous plant in China, contains an abundance of triterpenoid saponins and flavonoid glycosides that exhibit valuable pharmaceutical effects in preventing hypertension, hyperlipidemia, and diabetes. However, the molecular mechanism explaining the biosynthesis of triterpenoid saponin and flavonoid glycoside in C. paliurus remains unclear. In this study, the triterpene content in different tissues and the expression pattern of genes encoding the key enzymes associated with triterpenoid saponin and flavonoid glycoside biosynthesis were studied using transcriptome and metabolome analysis. The eight upstream oxidosqualene cyclases (OSCs) involved in triterpenoid saponin biosynthesis were functionally characterized, among them CpalOSC6 catalyzed 2,3;22,23-dioxidosqualene to form 3-epicabraleadiol; CpalOSC8 cyclized 2,3-oxidosqualene to generate dammarenediol-II; CpalOSC2 and CpalOSC3 produced β-amyrin and CpalOSC4 produced cycloartenol, while CpalOSC2-CpalOSC5, CpalOSC7, and CpalOSC8 all produced lanosterol. However, no catalytic product was detected for CpalOSC1. Moreover, two downstream flavonoid uridine diphosphate (UDP)-glycosyltransferases (UGTs) (CpalUGT015 and CpalUGT100) that catalyze the last step of flavonoid glycoside biosynthesis were functionally elucidated. These results uncovered the key genes involved in the biosynthesis of triterpenoid saponins and flavonoid glycosides in C. paliurus that could be applied to produce flavonoid glycosides and key triterpenoid saponins in the future via a synthetic strategy., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Renal failure is one of the most common chronic complications of diabetes. Simultaneous pancreas-kidney transplantation (SPK) is considered the preferred treatment for individuals with diabetes and chronic renal failure. This procedure has demonstrated efficacy in enhancing the quality of life for patients and minimizing the complications associated with diabetes., Objective: In this study, we analyzed the incidence and safety of complications in different thrombosis prevention techniques post simultaneous pancreas-kidney transplantation (SPK)., Methods: Patients who underwent SPK between January 2019 and December 2022 were selectively categorized into two groups: the heparin group and the non-heparin group depending on the utilization of low molecular weight heparin. The occurrence of complications and clinical outcomes were subsequently calculated in each group., Results: In this study, we included a total of 58 recipients who underwent SPK, with 36 in the heparin group and 22 in the non-heparin group. Among the 58 participants, there were 3 cases of pancreatic thrombosis complications, with 2 cases (5.6%) in the heparin group and 1 case (4.6%) in the non-heparin group, and the differences were not statistically significant (P> 0.05). Regarding gastrointestinal bleeding, there were 17 cases out of the total 58 patients, with 14 cases (38.9%) in the heparin group and 3 cases (13.6%) in the non-heparin group, and the difference was statistically significant (P< 0.05)., Conclusion: After surgery, the use of low molecular weight heparin anticoagulation may increase the likelihood of experiencing gastrointestinal bleeding. Prior to the surgery, a comprehensive evaluation of the coagulation status and medical history of the patient should be performed, enabling stratification of risks involved. Based on this assessment, either low-molecular-weight heparin or aspirin should be selected as a preventive measure against thrombosis.

The consistency of lithium-ion battery performance is the key factor affecting the safety and cycle life of battery packs. Surface engineering of electrodes in production processes plays an important role in improving the consistency of battery performance. In this study, the drying process in the electrode manufacturing process is studied as the effect on surface engineering of the electrode materials, with consideration on impacting the battery performance. Specifically, the solid content of the slurry and drying temperature are considered to be the two factors that affect conductive agent dispersion uniformity in the porous electrodes. To achieve surface engineering on the dispersion uniformity of the conductive agent, the optimal processing parameters can be obtained by adjusting the temperature and solid content of the slurry. The mechanism of dispersion uniformity of the conductive agent is mainly related to the polyvinylidene fluoride grid structure. In the manufacturing of lithium-ion batteries, the electrode coated with 66% solid slurry and dried at 90-100 °C presents stable energy storage performance, which is beneficial to maintain the stable performance of the battery pack in the application.

Typically, volume expansion of the electrodes after intercalation of active ions is highly undesirable yet inetvitable, and it can significantly reduce the adhesion force between the electrodes and current collectors. Especially in aluminum-ion batteries (AIBs), the intercalation of large-sized AlCl 4 - can greatly weaken this adhesion force and result in the detachment of the electrodes from the current collectors, which seems an inherent and irreconcilable problem. Here, an interesting concept, the "dead zone", is presented to overcome the above challenge. By incorporating a large number of OH - and COOH - groups onto the surface of MXene film, a rich negative-charge region is formed on its surface. When used as the current collector for AIBs, it shields a tiny area of the positive electrode (adjacent to the current collector side) from AlCl 4 - intercalation due to the repulsion force, and a tiny inert layer (dead zone) at the interface of the positive electrode is formed, preventing the electrode from falling off the current collector. This helps to effectively increase the battery's cycle life to as high as 50 000 times. It is believed that the proposed concept can be an important reference for future development of current collectors in rocking chair batteries., (© 2023 Wiley-VCH GmbH.)

The bright coniferous forest area in the cold temperate zone of China is a terrestrial ecosystem primarily dominated by low mountain Larix gmelinii trees. Limited information is available regarding the assembly mechanisms and interactions of microbial communities in the soil in this region. This study employed high-throughput techniques to obtain DNA from myxomycetes, bacteria, and fungi in the soil, evaluated their diversity in conjunction with environmental factors, associated them with the assembly process, and explored the potential interaction relationships between these microorganisms. The findings of our study showed that environmental factors had a more significant influence on the α and β diversity of bacteria compared to myxomycetes and fungi. Microbial communities were influenced by environmental selection and geographical diffusion, although environmental selection appeared to have a more significant impact than geographical diffusion. Our study suggested that different microorganisms exhibited unique evolutionary patterns and may have different assembly modes within phylogenetic groups. Myxomycetes and fungi exhibited a similar assembly process that was mainly influenced by stochastic dispersal limitation and drift. In contrast, bacteria's assembly process was primarily influenced by stochastic drift and deterministic homogeneous selection. The community of myxomycetes and fungi is greatly influenced by spatial distribution and random events, while bacteria have a relatively stable population composition in specific regions and may also be subject to environmental constraints. Finally, this study revealed that Humicolopsis cephalosporioides, a fungus that exclusively resided in cold environments, may play a critical role as a keystone species in maintaining molecular ecological networks and was considered a core member of the microbiome., Competing Interests: Declaration of competing interest The authors declare that there is no competition of interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

We describe three cases of overlapping Epstein-Barr virus (EBV) Encephalitis and Autoimmune Glial Fibrillary Acidic Protein Astrocytopathy (GFAP-A). The three cases all presented with initial symptoms of fever, headache, coma, and posture tremor of the upper limbs, then followed by limb weakness and dysuria. All of the three cases were on ventilators. Case 1 and 2 improved dramatically after intravenous methylprednisoloneand immunoglobulin treatment. However, case 3 presented dyspneic, and died from gastrointestinal hemorrhage. The GFAP-A triggered by EBV intracranial infection could initially masquerade as EBV encephalitis only, and the detection of GFAP antibody is essential for differentiation., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023. Published by Elsevier B.V.)

Achieving high energy density and long cycling life simultaneously remains the most critical challenge for aluminum-ion batteries (AIBs), especially for high-capacity conversion-type positive electrodes suffering from shuttle effect in strongly acidic electrolytes. Herein, we develop a layered quasi-solid AIBs system with double reaction zones (DRZs, Zone 1 and Zone 2) to address such issues. Zone 1 is designed to accelerate reaction kinetics by improving wetting ability of quasi-solid electrolyte to active materials. A composite three-dimensional conductive framework (Zone 2) interwoven by gel network for ion conduction and carbon nanotube network as electronic conductor, can fix the active materials dissolved from Zone 1 to allow for continuing electrochemical reactions. Therefore, a maximum electron transfer is realized for the conversion-type mateials in DRZs, and an ultrahigh capacity (400 mAh g -1 ) and an ultralong cycling life (4000 cycles) are achieved. Such strategy provides a new perspective for constructing high-energy-density and long-life AIBs., (© 2023. Springer Nature Limited.)

Sepsis-induced myocardial depression (SIMD) is common in pediatric intensive care units and seriously threatens children's health. Recently, long noncoding RNAs (lncRNAs) have been showed to play important roles in various diseases; however, its role in SIMD is unclear. In this study, we used lipopolysaccharide (LPS)-treated rats and H9c2 cardiomyocytes to mimic SIMD in vivo and in vitro. We found that the expression of a novel lncRNA, we named lncRNA-AABR07066529.3, was elevated in LPS-induced rat heart tissue and H9c2 cardiomyocytes. In addition, LPS-induced inflammation, apoptosis, and pyroptosis were significantly exacerbated after lncRNA-AABR07066529.3 knockdown. Moreover, we found that myeloid differentiation factor 88 (MyD88) was upregulated in LPS-treated groups and was inhibited by lncRNA-AABR07066529.3. Besides, MyD88 knockdown abolished lncRNA-AABR07066529.3 silencing effects on inflammation, apoptosis, and pyroptosis induced by LPS in H9c2 cardiomyocytes. In our study, we found lncRNA-AABR07066529.3 exerted protective effects on LPS-induced cardiomyocytes by regulating MyD88 and might serve as a potential treatment target for SIMD., (© 2023 The Authors. The FASEB Journal published by Wiley Periodicals LLC on behalf of Federation of American Societies for Experimental Biology.)

Glycosylation is a common post-translational modification in eukaryotic cells. It is involved in the production of many biologically active glycoproteins and the regulation of protein structure and function. Core fucosylation plays a vital role in the immune response. Most immune system molecules are core fucosylated glycoproteins such as complements, cluster differentiation antigens, immunoglobulins, cytokines, major histocompatibility complex molecules, adhesion molecules, and immune molecule synthesis-related transcription factors. These core fucosylated glycoproteins play important roles in antigen recognition and clearance, cell adhesion, lymphocyte activation, apoptosis, signal transduction, and endocytosis. Core fucosylation is dominated by fucosyltransferase 8 (Fut8), which catalyzes the addition of α-1,6-fucose to the innermost GlcNAc residue of N-glycans. Fut8 is involved in humoral, cellular, and mucosal immunity. Tumor immunology is associated with aberrant core fucosylation. Here, we summarize the roles and potential modulatory mechanisms of Fut8 in various immune processes of the gastrointestinal system., Competing Interests: Conflict-of-interest statement: The authors declare no commercial or financial conflict of interest., (©The Author(s) 2023. Published by Baishideng Publishing Group Inc. All rights reserved.)

Owing to high-efficiency and scalable advantages of electrolysis in molten salts, electrochemical conversion of carbonaceous resources into graphitic products is a sustainable route for achieving high value-added carbon. To understand the complicated kinetics of converting amorphous carbon (e.g. carbonized lignin-biochar) into highly graphitic carbon, herein this study reports the key processing parameters (addition of Ni, temperature and time) and multi-scale approach of nickel-boosted electrochemical graphitization-catalysis processes in molten calcium chloride. Upon both experiments and modellings, multi-scale analysis that ranges from nanoscale atomic reaction to macroscale cell reveal the multi-field evolution in the electrolysis cell, mechanism of electrochemical reaction kinetics as well as pathway of nickel-boosted graphitization and tubulization. The results of as-achieved controllable processing regions and multi-scale approaches provide a rational strategy of manipulating electrochemical graphitization processes and utilizing the converted biomass resources for high value-added use., (© 2023 Wiley-VCH GmbH.)

Biofouling and corrosion of underwater equipment induced by marine organisms have become major issues in the marine industry. The superior corrosion resistance of Fe-based amorphous coatings makes them suitable for marine applications; however, they have a poor antifouling ability. In this work, a hydrogel-anchored amorphous (HAM) coating with satisfactory antifouling and anticorrosion performance is designed, utilizing an interfacial engineering strategy involving micropatterning, surface hydroxylation, and a dopamine intermediate layer to increase the adhesion strength between the hydrogel layer and the amorphous coating. The as-obtained HAM coating exhibits exceptional antifouling properties, achieving 99.8% resistance to algae, 100% resistance to mussels, and excellent biocorrosion resistance against Pseudomonas aeruginosa . Antifouling and anticorrosion performance of the HAM coating was also explored by conducting a marine field test in the East China Sea, and no signs of corrosion and fouling are observed after 1 month of immersion. It is revealed that the outstanding antifouling properties stem from the killing-resisting-camouflaging trinity that resists organism attachment across different length scales, and the excellent anticorrosion performance originates from the remarkable barrier of the amorphous coating against Cl - ion diffusion and microbe-induced biocorrosion. This work presents a novel methodology for designing marine protective coating with excellent antifouling and anticorrosion properties.

The petroleum coke (PC) has been widely used as raw materials for the preparation of electrodes in aluminium electrolysis and lithium-ion batteries (LIB), during which massive CO 2 gases are produced. To meet global CO 2 reduction, an environmentally friendly route for utilizing PC is highly required. Here, a simple, scalable, catalyst-free process that can directly convert high-sulfur PC into graphitic nanomaterials under cathodic polarization in molten CaCl 2 -LiCl at mild temperatures is proposed. The energy consumption of the proposed process is calculated to be 3 627.08 kWh t -1 , half that of the traditional graphitization process (≈7,825.21 kWh t -1 graphite). When applied as a negative electrode for LIBs, the as-converted graphite materials deliver a competitive specific capacity of ≈360 mAh g -1 (0.2 C) compared with commercial graphite. This approach has great potential to scale up for sustainably converting low-value PC into high-quality graphite for energy storage., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

The relationship between interface structure (e. g., the facet of the solid phase and the configuration of solvation) and the reactivity of the corresponding electrode is a critical issue in electrochemistry. Compared to macroscopic electrode measurements, electrochemical methods established on the single-particle scale have advantages in establishing the structure-property relationship. In recent years, great achievements have been made in electrochemical energy storage and electrocatalysis that allow the evolution and kinetics of electrodes to be understood by employing single-particle measurements. This concept aims to provide an overview of the update of single-particle measurements in related electrochemical processes. Furthermore, the challenges and prospects for the development and application of single-particle measurements are also discussed., (© 2022 Wiley-VCH GmbH.)

Vascular calcification and aging often increase morbidity and mortality in patients with diabetes mellitus (DM); however, the underlying mechanisms are still unknown. In the present study, we found that Bcl-2 modifying factor (BMF) and BMF antisense RNA 1 (BMF-AS1) were significantly increased in high glucose-induced calcified and senescent vascular smooth muscle cells (VSMCs) as well as artery tissues from diabetic mice. Inhibition of BMF-AS1 and BMF reduced the calcification and senescence of VSMCs, whereas overexpression of BMF-AS1 and BMF generates the opposite results. Mechanistic analysis showed that BMF-AS1 interacted with BMF directly and up-regulated BMF at both mRNA and protein levels, but BMF did not affect the expression of BMF-AS1. Moreover, knocking down BMF-AS1 and BMF suppressed the calcification and senescence of VSMCs, and BMF knockout (BMF -/- ) diabetic mice presented less vascular calcification and aging compared with wild type diabetic mice. In addition, higher coronary artery calcification scores (CACs) and increased plasma BMF concentration were found in patients with DM, and there was a positive correlation between CACs and plasma BMF concentration. Thus, BMF-AS1/BMF plays a key role in promoting high glucose-induced vascular calcification and aging both in vitro and in vivo . BMF-AS1 and BMF represent potential therapeutic targets in diabetic vascular calcification and aging., Competing Interests: Competing interests All authors have no conflict of interest., (copyright: © 2022 Lin et al.)

Rechargeable aluminum-ion batteries have attracted significant attention as candidates for next-generation energy storage devices owing to their high theoretical capacity, safe performance, and abundance of raw materials. Al metal is the best option as the negative electrode, while its issues such as dendrite growth and corrosion accompanying hydrogen evolution in ionic liquid electrolyte have been seriously overlooked. Understanding the electrochemical mechanism of the surface evolution behavior of Al metal is a vital pathway for solving these issues. Kinetic parameters and electrode structure are the two key parameters that affect the surface evolution behavior of Al negative electrodes. Herein, the qualitative relationship between the kinetic parameters and surface evolution behavior of the Al negative electrode was established through a combination of in-situ optical technology and multi-physical field numerical simulation method. The key kinetic parameters, including ion concentration and transfer coefficient, exhibited different laws of influence on the surface evolution behavior, such as dendrite growth and corrosion. The electrochemical mechanism on the surface evolution was explored to guide the optimization design of Al-ion batteries. Based on the coupling design of the electrode structure and kinetic parameters, a highly stable porous aluminum structure composed of Al powder with a particle size of 100 μm was constructed to obtain highly stable and high-performance aluminum-ion batteries. This method provides new sight into the design of high-performance aluminum-ion batteries., (© 2022 Wiley-VCH GmbH.)

Background: Proliferation of vascular smooth muscle cells (VSMCs) is a hallmark of arterial diseases, especially in arterial restenosis after angioplasty or stent placement. VSMCs reprogram their metabolism to meet the increased requirements of lipids, proteins, and nucleotides for their proliferation. De novo purine synthesis is one of critical pathways for nucleotide synthesis. However, its role in proliferation of VSMCs in these arterial diseases has not been defined., Methods: De novo purine synthesis in proliferative VSMCs was evaluated by liquid chromatography-tandem mass spectrometry. The expression of ATIC (5-aminoimidazole-4-carboxamide ribonucleotide formyltransferase/inosine monophosphate cyclohydrolase), the critical bifunctional enzyme in the last 2 steps of the de novo purine synthesis pathway, was assessed in VSMCs of proliferative arterial neointima. Global and VSMC-specific knockout of Atic mice were generated and used for examining the role of ATIC-associated purine metabolism in the formation of arterial neointima and atherosclerotic lesions., Results: In this study, we found that de novo purine synthesis was increased in proliferative VSMCs. Upregulated purine synthesis genes, including ATIC, were observed in the neointima of the injured vessels and atherosclerotic lesions both in mice and humans. Global or specific knockout of Atic in VSMCs inhibited cell proliferation, attenuating the arterial neointima in models of mouse atherosclerosis and arterial restenosis., Conclusions: These results reveal that de novo purine synthesis plays an important role in VSMC proliferation in arterial disease. These findings suggest that targeting ATIC is a promising therapeutic approach to combat arterial diseases.

Dynamic color display can be realized by tunable optical metasurfaces based on the compositional or structural control. However, it is still a challenge to realize the efficient modulation by a single-field method. Here, we report a novel compositional and mechanical dual-altered rechargeable metasurface for reversible and broadband optical reconfiguration in both visible and near-infrared wavelength regions. By employing a simple fabrication and integration strategy, the continuous optical reconfiguration is manipulated through an electro-chemo-mechanical coupled process in a lithium ion battery, where lithiation and delithiation processes occur dynamically under a low electric voltage (≤1.5 V). By controlling the phase transformation from Si to Li x Si, both structural morphology and optical scattering could be rapidly and dramatically tailored within 30 s, exhibiting high-contrast colorization and decolorization in a large-area nanofilm and showing long cyclic stability. Significant wide-angle reconfiguration of high-resolution structural colors in bowtie metasurfaces is demonstrated from anomalous reflection. The results provide a multifield mechanism for reconfigurable photonic devices, and the new platform can be introduced to the multidimensional information encryption and storage., Competing Interests: The authors declare that there is no conflict of interest regarding the publication of this article., (Copyright © 2022 Le Yang et al.)

Background: Patients with nonmetastatic pT3-4 colon cancers are prone to develop metachronous peritoneal carcinomatosis (mPC). Risk factors for mPC and the influence of mutant kirsten rat sarcoma viral oncogene (KRAS)/neuroblastoma rat sarcoma (NRAS)/v-raf murine sarcoma viral oncogene homolog B1 (BRAF) and DNA mismatch repair (MMR) status on mPC remain to be described in these patients., Method: All enrolled patients were identified from the prospectively collected colorectal cancer database of a tertiary referral hospital between 2013 and 2018. Multivariate analysis was used to identify risk factors associated with mPC., Results: Of the 1689 patients with nonmetastatic pT3-4 colon carcinoma, 8.4% (142/1689) progressed to mPC. Endoscopic obstruction (HR = 3.044, p < 0.001), elevated CA125 (HR = 1.795, p = 0.009), pT (T4a vs. T3, HR = 2.745, p < 0.001; T4b vs. T3, HR = 3.167, p = 0.001), pN (N1 vs. N0, HR = 2.592, p < 0.001; N2 vs. N0, HR = 4.049, p < 0.001), less than 12 lymph nodes harvested (HR = 2.588, p < 0.001), mucinous or signet ring cell carcinoma (HR = 1.648, p = 0.038), perineural invasion (HR = 1.984, p < 0.001), and adjuvant chemotherapy (HR = 1.522, p = 0.039) were strongly related to mPC but that mutant KRAS/NRAS/BRAF and MMR status was not associated with mPC., Conclusion: This study identified the high-risk factors for mPC in patients with nonmetastatic pT3-4 colon carcinoma, and these factors should be considered in selective preventive therapy and close follow-up for patients subsequently deemed to have high risk for mPC., (© 2022 Wiley Periodicals LLC.)

Characterizing microscale single particles directly is requested for dissecting the performance-limiting factors at the electrode scale. In this work, we build a single-particle electrochemical setup and develop a physics-based model for extracting the solid-phase diffusion coefficient (D s ) and exchange current density (i 0 ) from electrochemical impedance measurements. We find that the carbon coating on the LiNi 1/3 Mn 1/3 Co 1/3 O 2 surface enhances i 0 . In addition, D s and i 0 decay irreversibly by ≈25 % and ≈10 %, respectively, when the cutoff charge voltage increases from 4.3 V to 4.4 V. Moreover, we correlate intrinsic parameters of single particles with the performance of porous electrodes. Porous electrodes assembled with active particles with higher i 0 values deliver a greater capacity and faster capacity fade. The methods developed in this combined experimental and theoretical work can be useful in correlating the single-particle scale and porous-electrode scale for other similar systems., (© 2022 Wiley-VCH GmbH.)

In this study, a screening strategy was established based on ultrahigh-performance liquid chromatography coupled with high-resolution mass spectrometry assisted by chemical isotope labeling (CIL-UPLC-HRMS) for screening and identifying abscisic acid (ABA) catabolites. Based on the structures of known ABA catabolites, this strategy first proposed the structures of catabolites to be discovered. Afterward, a pair of isotope reagents N , N -2-dimethylaminoethylamine (DMED) and d 4 -DMED were used as labeling reagents to label the carboxyl groups in ABA and its catabolites. Then, the mass-to-charge ratio ( m / z ) of DMED- and d 4 -DMED-labeled ABA catabolites was calculated based on the labeling schema. In light of the characteristic fragmentation patterns of the DMED-labeled standards of ABA and its catabolites, screening criteria were formulated. Using our strategy, ABA, t- ABA, and 18 ABA catabolites were identified from seven plant samples. Of the identified catabolites, 16 were known, and to our knowledge, 2 were previously unidentified. Our findings contribute to ABA catabolic network improvement.

Aluminum-sulfur (Al-S) batteries of ultrahigh energy-to-price ratios are a promising energy storage technology, while they suffer from a large voltage gap and short lifespan. Herein, we propose an electrocatalyst-boosting quasi-solid-state Al-S battery, which involves a sulfur-anchored cobalt/nitrogen co-doped graphene (S@CoNG) positive electrode and an ionic-liquid-impregnated metal-organic framework (IL@MOF) electrolyte. The Co-N 4 sites in CoNG continuously catalyze the breaking of Al-Cl and S-S bonds and accelerate the sulfur conversion, endowing the Al-S battery with a shortened voltage gap of 0.43 V and a high discharge voltage plateau of 0.9 V. In the quasi-solid-state IL@MOF electrolytes, the shuttle effect of polysulfides has been inhibited, which stabilizes the reversible sulfur reaction, enabling the Al-S battery to deliver 820 mAh g -1 specific capacity and 78 % capacity retention after 300 cycles. This finding offers novel insights to design Al-S batteries for stable energy storage., (© 2022 Wiley-VCH GmbH.)

The ionic conductivity of composite solid-state electrolytes (SSEs) can be tuned by introducing inorganic fillers, of which the mechanism remains elusive. Herein, ion conductivity of composite SSEs is characterized in an unprecedentedly wide frequency range of 10 -2 -10 10  Hz by combining chronoamperometry, electrochemical impedance spectrum, and dielectric spectrum. Using this method, it is unraveled that how the volume fraction v and surface fluorine content x F of TiO 2 fillers tune the ionic conductivity of composite SSEs. It is identified that activation energy E a is more important than carrier concentration c in this game. Specifically, c increases with v while E a has the minimum value at v = 10% and increases at larger v. Moreover, E a is further correlated with the dielectric constant of the SSE via the Marcus theory. A conductivity of 3.1×10 -5 S cm -1 is obtained at 30 °C by tuning v and x F , which is 15 times higher than that of the original SSE. The present method can be used to understand ion conduction in various SSEs for solid-state batteries., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Objective: To establish a high performance liquid chromatography method for the determination of 2-thioxothiazolidine-4-carboxylic acid (TTCA) in urine. Methods: After acidification with hydrochloric acid, TTCA in urine was first extracted by ethyl acetate with excessive sodium chloride, then gradient separated by a symmetry C18 column and then detected by a diode array detector. The quantification was based on a working curve of external standard method. Results: The linear relationship of TTCA in urine was good in the range of 0.03-10.00 mg/L, and the correlation coefficient was 0.9999. The detection limit and minimum quantitative concentration of TTCA in urine were 0.008 mg/L and 0.027 mg/L. The intra-assay precision of the method was 0.9%-1.4%, the inter-assay precision was 1.3%-3.5%, and the average recovery was 85.0%-92.7% while the concentrations of TTCA in urine was 0.8, 2.0 and 8.0 mg/L, respectively ( n =6) . Conclusion: The gradient elution high performance liquid chromatography method has simple operation and high sensitivity, and it is suitable for the determination of TTCA on a low level in urine for occupational workers exposure to carbon disulfide.

Objectives: To evaluate the clinical effect of magnesium aluminum carbonate combined with rabeprazole-based triple therapy in the treatment of patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage., Methods: A total of 80 patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage admitted to the Baoding First Central Hospital from January 2019 to December 2020 were selected and randomly divided into two groups, with 40 cases in each group. The control group were given rabeprazole-based triple therapy, while the experimental group were treated with magnesium aluminum carbonate on the basis of the control group. The changes of symptoms and signs such as abdominal pain, abdominal distension, nausea, vomiting and hematochezia were compared between the two groups before and after treatment. Serological changes of the gastric mucosal microenvironment, such as the serum levels of extracellular regulatory protein kinase (ERK), superoxide dismutase (SOD) and epidermal growth factor receptor (EGFR), were compared between the two groups. Moreover, the differences in the results of gastroscopy between the two groups before and after treatment were compared and analyzed., Results: The scores of gastrointestinal symptoms in the experimental group after treatment were significantly improved compared with the control group (p=0.00). The levels of ERK and EGFR in the experimental group were significantly lower than those in the control group (ERK, p=0.01; EGRF, p=0.00), while the level of SOD was significantly increased (p=0.02). After treatment, the total effective rate of ulcer healing in the experimental group was 82.5%, which was significantly better than 60% in the control group (p=0.03). After treatment, moderate to severe gastric mucosal inflammation in the experimental group decreased to 10%, significantly better than that in the control group (decreased to 30%) (p=0.03)., Conclusion: Magnesium aluminum carbonate combined with rabeprazole-based triple therapy is preferred for the treatment of patients with Helicobacter pylori-positive gastric ulcer associated with hemorrhage. With such a highly effective treatment regimen, the internal environment and blood supply of gastric mucosal cells can be significantly improved, gastric mucosal inflammation and gastrointestinal symptoms can be ameliorated, and the healing of ulcer surfaces can be accelerated., Competing Interests: Declaration of conflicting interest: None., (Copyright: © Pakistan Journal of Medical Sciences.)

Objective: To explore the correlation of cytochrome B-245 alpha chain ( CYBA ) rs4673 and cholesteryl ester transfer protein ( CETP ) rs12720922 polymorphisms with the susceptibility of gene-ralized aggressive periodontitis (GAgP)., Methods: The study was a case-control trial. A total of 372 GAgP patients and 133 periodontally healthy controls were recruited. The CYBA rs4673 and CETP rs12720922 polymorphisms were detected by matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS). Logistic regression models were used to analyze the correlation of CYBA rs4673 and CETP rs12720922 variants with the susceptibility of GAgP. The interaction between the two gene polymorphisms to the susceptibility of GAgP was analyzed by the likelihood ratio test. The interaction model adopted was the multiplication model., Results: The mean age of GAgP group and control group was (27.5±5.2) years and (28.8±7.1) years respectively. There was significant difference in age between the two groups ( P < 0.05). The gender distribution (male/female) was 152/220 and 53/80 respectively, and there was no significant difference between GAgP group and controls ( P >0.05). For CYBA rs4673, the frequency of CT/TT genotype in the GAgP group was significantly higher than that in the controls [18.0% (66/366) vs . 10.6% (14/132), P < 0.05]. After adjusting age and gender, the individuals with CT/TT genotype had a higher risk of GAgP ( OR =1.86, 95% CI : 1.01-3.45, P < 0.05), compared with CC genotype. There was no statistically significant difference in distributions of the CETP rs12720922 genotypes (GG, AA/AG) between GAgP patients and healthy controls ( P >0.05). A significant interaction between CYBA rs4673 and CETP rs12720922 in the susceptibility to GAgP was observed. The GAgP risk of the individuals with CYBA rs4673 CT/TT and CETP rs12720922 GG genotypes was significantly increased ( OR =3.25, 95% CI : 1.36-7.75, P < 0.01), compared with those carrying CC and AA/AG genotypes., Conclusion: CYBA rs4673 CT/TT genotype is associated with GAgP susceptibility. There is a significant interaction between CYBA rs4673 CT/TT genotype and CETP rs12720922 GG genotype in the susceptibility of GAgP.

High-temperature electrochemistry is widely used in many fields. However, real-time observations and an in-depth understanding of the inside evolution of this system from an experimental perspective remain limited because of harsh reaction conditions and multiphysics fields. Here, we tackled this challenge with a high-temperature electrolysis facility developed in-house. This facility permits in situ x-ray computer microtomography (μ-CT) for nondestructive and quantitative three-dimensional (3D) imaging. In an electrorefining system, the μ-CT probed the dynamic evolution of 3D morphology and components of electrodes (4D). Subsequently, this 4D process was visually presented via reconstructed images. The results monitor the efficiency of the process, explore the dynamic mechanisms, and even offer real-time optimization. This 4D analysis platform is notable for in-depth combinations of traditional electrochemistry with digital twin technologies owing to its multiscale visualization and high efficiency of data extraction.

Nonaqueous rechargeable aluminum batteries (RABs) of low cost and high safety are promising for next-generation energy storage. With the presence of ionic liquid (IL) electrolytes, their high moisture sensitivity and poor stability would lead to critical issues in liquid RABs, including undesirable gas production, irreversible activity loss, and an unstable electrode interface, undermining the operation stability. To address such issues, herein, a stable quasi-solid-state electrolyte is developed via encapsulating a small amount of an IL into a metal-organic framework, which not only protects the IL from moisture, but creates sufficient ionic transport network between the active materials and the electrolyte. Owing to the generated stable states at both positive-electrode-electrolyte and negative-electrode-electrolyte interfaces, the as-assembled quasi-solid-state Al-graphite batteries deliver specific capacity of ≈75 mA h g -1 (with positive electrode material loading ≈9 mg cm -2 , much higher than that in the conventional liquid systems). The batteries present a long-term cycling stability beyond 2000 cycles, with great stability even upon exposure to air within 2 h and under flame combustion tests. Such technology opens a new platform of designing highly safe rechargeable Al batteries for stable energy storage., (© 2022 Wiley-VCH GmbH.)

Glaucoma is the world's leading cause of irreversible blindness. As a chronic disease, it requires lifelong follow-up and management. In the long-term follow-up of glaucoma patients, a diagnosis and treatment management system is helpful. Despite the availability of various means of informationalized record management, there remain problems and challenges, like a lack of unified file management standards, data incompatibility, and barriers to inter-hospital data sharing, which lead to the failure to establish a comprehensive and standardized glaucoma record for patients. It is necessary to form a standardized management system so as to improve the efficiency and accuracy of the diagnosis and treatment of glaucoma, better maintain the visual function of patients and reduce the burden on society and family.

Electrodeposition is a fundamental technology in modern society and has been widely used in metal plating and extraction, etc. However, extreme reaction conditions, including wide operation temperature ranges and corrosive media (molten salt/oxide systems as a particular example), inhibit direct in situ observation of the electrodeposition process. To visualize the electrode kinetics in such "black box," X-ray tomography is employed to monitor the electrochemical processes and three-dimensional (3D) evolution of morphology. Benefiting from the excellent penetration of X-ray, a non-destructive and non-contact in situ four-dimensional (4D) visualization of Ti deposition is realized. Real-time 3D reconstructed images reveal that the counterintuitive nucleation and growth process of a mesoscale Ti dendrite at both solid and liquid cathodes. According to 3D morphology evolution, unusual mechanism based on synergetic effect of the diffusion of metallic Ti and local field enhancement is achieved utilizing a simulation method based on a finite element method. This approach allows for timely and accurately regulating the electrodeposition process upon in situ monitored parameters. More importantly, the 4D technique upon operando X-ray tomography and numerical simulation can be easily applied to other electrodeposition systems, which will help deeply understand the internal kinetics and the precise optimization of the electrodeposition conditions., (© 2021 The Authors. Advanced Science published by Wiley-VCH GmbH.)

R2 R3-MYB transcription factors are ubiquitous in plants, playing a role in the regulation of plant growth, development, and secondary metabolism. In this paper, the R2 R3-MYB transcription factors were identified by bioinformatics analysis of the genomic data of Erigeron breviscapus, and their gene sequences, structures, physical and chemical properties were analyzed. The functions of R2 R3-MYB transcription factors were predicted by cluster analysis. Meanwhile, the expression patterns of R2 R3-MYB transcription factors in response to hormone treatments were analyzed. A total of 108 R2 R3-MYB transcription factors, named EbMYB1-EbMYB108, were identified from the genome of E. breviscapus. Most of the R2 R3-MYB genes carried 2-4 exons. The phylogenetic tree of MYBs in E. breviscapus and Arabidopsis thaliala was constructed, which classified 234 MYBs into 30 subfamilies. The MYBs in the five MYB subfamilies of A.thaliala were clustered into independent clades, and those in E. breviscapus were clustered into four clades. The transcriptome data showed that MYB genes were differentially expressed in different tissues of E. breviscapus and in response to the treatments with exogenous hormones such as ABA, SA, and GA for different time. The transcription of 13 R2 R3-MYB genes did not change significantly, and the expression patterns of some genes were up-regulated or down-regulated with the extension of hormone treatment time. This study provides a theoretical basis for revealing the mechanisms of R2 R3-MYB transcription factors in regulating the growth and development, stress(hormone) response, and active ingredient accumulation in E. breviscapus.