Search

The generation of submicron structures on plastic part surfaces can be used to modify their wetting properties allowing the creation of superhydrophobic surfaces. The modified wetting behavior can allow functionalities such as fluid collection or transport, which are critical for microfluidics. Consistent manufacturing is achieved through surface replication and process characterization. In this work, submicron structures were generated on steel mold inserts using ultrafast femtosecond laser and then replicated by micro injection molding on polypropylene and polylactic acid. Samples with Laser-Induced Periodic Surface Structures (LIPSS) were fabricated using a femtosecond laser and characterized to investigate the effects of mold temperature, texture orientation, and material selection on the dynamic contact angle. The dynamic wetting functionality of the surfaces was investigated by analysis of the advancing and receding contact angles. The hysteresis obtained from the dynamic measurements provides information about the fluid/texture interaction dynamics. The experimental results show that the effects of mold temperature and drop orientation are only significant for the advancing contact angles. The large contact angle hysteresis suggests a parahydrophobic wetting behavior for the manufactured plastic parts. KEYWORDS dynamic wetting, femtosecond laser, hydrophobic surface, injection molding, surface engineering, 1 | INTRODUCTION The modification of plastic surfaces' wetting properties to superhydrophobic has been the topic of research over the last 15 years, across many fields, including medical, military, and [...]

The zebrafish (Danio rerio) is a valuable model organism for studying human biology due to its easy genetic manipulation and small size. It is optically transparent and shares genetic similarities with humans, making it ideal for studying developmental processes, diseases, and drug screening via imaging-based approaches. Solid malignant tumors often contain hypoxic areas that stimulate the release of extracellular vesicles (EVs), lipid-bound structures released by cells into the extracellular space, that facilitate short- and long-range intercellular communication and metastatization. Here we investigate the effects of EVs derived from neuroblastoma (NB), a pediatric solid tumor, on metastatic niche formation using the zebrafish as an in vivo model. Intravascular injection in zebrafish embryos allows a non-invasive visualization of EVs dispersion, uptake, and interactions with host cells. To improve repeatability of our results and ease the injection steps, we used an agarose device replica molded from a custom designed micromilled aluminum mold. We first demonstrated that EVs released under hypoxic conditions promote angiogenesis and are more easily internalized by endothelial cells than those purified from normoxic cells. We also showed that injection of with hypoxic EVs increased macrophages mobilization. We then focused on the caudal hematopoietic tissue (CHT) region of the embryo as a potential metastatic site. After hypoxic EVs injection, we highlighted changes in the expression of mmp-9 and cxcl8b genes. Furthermore, we investigated the ability of NB-derived EVs to prime a metastatic niche by a two-step injection of EVs first, followed by NB cells. Interestingly, we found that embryos injected with hypoxic EVs had more proliferating NB cells than those injected with normoxic EVs. Our findings suggest that EVs released by hypoxic NB cells alter the behavior of recipient cells in the zebrafish embryo and promote metastatic outgrowth. In addition, we demonstrated the ability of the zebrafish embryo to be a suitable model for studying the interactions between EVs and recipient cells in the metastatic process. [ABSTRACT FROM AUTHOR]

Metal matrix composites (MMCs) show enhanced mechanical and physical properties compared to monolithic alloys, which make them attractive for various engineering applications. However, their actual use in industry is limited due to their low machinability. The hard reinforcements present in the matrix may lead to high tool wear and poor surface integrity. In this context, the paper aims at studying the drillability of an Al-SiC MMC when using DLC-coated tungsten carbide tools at varying feeds. After the machining trials, a quantitative evaluation of the tool wear as well as the analysis of the hole surface roughness and damage was carried out. The results demonstrate that, at increasing feed, the tool wear, surface roughness, and surface defect density decrease, leading to the counterintuitive conclusion that increasing feed when drilling causes an increase in the MMC drillability. [ABSTRACT FROM AUTHOR]

In injection molding, high pressure is required to completely replicate the mold geometry, due to the viscosity of thermoplastic polymers, the reduced thickness of the cavity, and the low mold temperature. The reduction of the drag required to fill a thin-wall injection molding cavity can be promoted by inducing the strong slip of the polymer melt over the mold surface, which occurs within the first monolayer of macromolecules adsorbed at the wall. In this work, the effects of different laser-induced periodic surface structures (LIPSS) topographies on the reduction of the melt flow resistance of polypropylene were characterized. Ultrafast laser processing of the mold surface was used to manufacture nano-scale ripples with different orientation and morphology. Moreover, the effects of those injection molding parameters that mostly affect the interaction between the mold surface and the molten polymer were evaluated. The effect of LIPSS on the slip of the polymer melt was modeled to understand the effect of the different treatments on the pressure required to fill the thin-wall cavity. The results show that LIPPS can be used to treat injection mold surfaces to promote the onset of wall slip, thus reducing the injection pressure up to 13%., INTRODUCTION The interest for weight and cost reduction of plastic products has been constantly pushing injection molding manufactures towards the design of thinner parts [1-3], thus allowing the reduction of [...]