Search

Tau rhythms are largely defined by sound responsive alpha band (~8-13 Hz) oscillations generated largely within auditory areas of the superior temporal gyri. Studies of tau have mostly employed magnetoencephalography or intracranial recording because of taus elusiveness in the electroencephalogram. Here, we demonstrate that independent component analysis (ICA) decomposition can be an effective way to identify tau sources and study tau source activities in EEG recordings. Subjects (N = 18) were passively exposed to complex acoustic stimuli while the EEG was recorded from 68 electrodes across the scalp. Subjects data were split into 60 parallel processing pipelines entailing use of five levels of high-pass filtering (passbands of 0.1, 0.5, 1, 2, and 4 Hz), three levels of low-pass filtering (25, 50, and 100 Hz), and four different ICA algorithms (fastICA, infomax, adaptive mixture ICA [AMICA], and multi-model AMICA [mAMICA]). Tau-related independent component (IC) processes were identified from this data as being localized near the superior temporal gyri with a spectral peak in the 8-13 Hz alpha band. These tau ICs showed alpha suppression during sound presentations that was not seen for other commonly observed IC clusters with spectral peaks in the alpha range (e.g., those associated with somatomotor mu, and parietal or occipital alpha). The choice of analysis parameters impacted the likelihood of obtaining tau ICs from an ICA decomposition. Lower cutoff frequencies for high-pass filtering resulted in significantly fewer subjects showing a tau IC than more aggressive high-pass filtering. Decomposition using the fastICA algorithm performed the poorest in this regard, while mAMICA performed best. The best combination of filters and ICA model choice was able to identify at least one tau IC in the data of ~94% of the sample. Altogether, the data reveal close similarities between tau EEG IC dynamics and tau dynamics observed in MEG and intracranial data. Use of relatively aggressive high-pass filters and mAMICA decomposition should allow researchers to identify and characterize tau rhythms in a majority of their subjects. We believe adopting the ICA decomposition approach to EEG analysis can increase the rate and range of discoveries related to auditory responsive tau rhythms.

Objective Methods Results Significance Epilepsy raises critical challenges to accurately localize the epileptogenic zone (EZ) to guide presurgical planning. Previous research has suggested that interictal spikes overlapping with high‐frequency oscillations, referred to here as pSpikes, serve as a reliable biomarker for EZ estimation, but there remains a question as to whether and to how pSpikes perform as compared to other types of epileptic spikes. This study aims to address this question by investigating the source imaging capabilities of pSpikes alongside other spike types.A total of 2819 interictal spikes from 76‐channel scalp electroencephalography (EEG) were analyzed in a cohort of 24 drug‐resistant focal epilepsy patients. All patients received surgical resection, and 16 were declared seizure‐free based on at least 1 year of postoperative follow‐up. A recently developed electrophysiological source imaging algorithm—fast spatiotemporal iteratively reweighted edge sparsity (FAST‐IRES)—was used for source imaging of the detected interictal spikes. The performance of 217 pSpikes was compared with 772 nSpikes (spikes with irregular high‐frequency activations), 1830 rSpikes (spikes with no high‐frequency activity), and all 2819 aSpikes (all interictal spikes).The localization and extent estimation using pSpikes are concordant with the clinical ground truth; using pSpikes yields the best performance compared with nSpikes, rSpikes, and conventional spike imaging (aSpikes). For multiple spike type seizure‐free patients, the mean localization error for pSpike imaging was 6.8 mm, compared with 15.0 mm for aSpikes. The sensitivity, precision, and specificity were .41, .67, and .93 for pSpikes compared with .32, .48, and .93 for aSpikes.These results demonstrate the merits of noninvasive EEG source localization, and that (1) pSpike is a superior biomarker, outperforming conventional spike imaging for the localization of epileptic sources, and especially those with multiple irritative zones; and (2) FAST‐IRES provides accurate source estimation that is highly concordant with clinical ground truth, even in situations of single spike analysis with low signal‐to‐noise ratio. [ABSTRACT FROM AUTHOR]

Acoustic emission (AE) source localization technology, since the early application to one-dimensional structures, has been extended to a wide range of applications to two-dimensional (2D) structures, including isotropic and anisotropic materials, which are currently the most widely studied and the most mature. With the development of AE source localization technology, more and more significant challenges have arisen for three-dimensional (3D) structures, which are mostly anisotropic and have complex propagation paths. This paper summarizes and discusses the AE source localization methods in different dimensions as well as their applications, including the main methods for 2D AE source localization, such as the triangulation method, beam forming, strain rosette technique, modal AE, artificial neural network, optimization and the time reversal technique, as well as state-of-the-art AE source localization methods in isotropic and anisotropic structures utilizing these methods. Recent advances in AE source localization in complex 3D structures are also reviewed. [ABSTRACT FROM AUTHOR]

Acoustic emissions (AEs) are produced by elastic waves generated by damage in solid materials. AE sensors have been widely used in several fields as a promising tool to analyze damage mechanisms such as cracking, dislocation movement, etc. However, accurately determining the location of damage in solids in a non-destructive manner is still challenging. In this paper, we propose a crack wave arrival time determination algorithm that can identify crack waves with low SNRs (signal-to-noise ratios) generated in rocks. The basic idea is that the variances in the crack wave and noise have different characteristics, depending on the size of the moving window. The results can be used to accurately determine the crack source location. The source location is determined by observing where the variance in the crack wave velocities of the true and imaginary crack location reach a minimum. By performing a pencil lead break test using rock samples, it was confirmed that the proposed method could successfully find wave arrival time and crack localization. The proposed algorithm for source localization can be used for evaluating and monitoring damage in tunnels or other underground facilities in real time. [ABSTRACT FROM AUTHOR]

Tai Chi (TC) practice has been shown to improve both cognitive and physical function in older adults. However, the neural mechanisms underlying the benefits of TC remain unclear. Our primary aims are to explore whether distinct age-related and TC-practice-related relationships can be identified with respect to either temporal or spatial (within/between-network connectivity) differences. This cross-sectional study examined recurrent neural network dynamics, employing an adaptive, data-driven thresholding approach to source-localized resting-state EEG data in order to identify meaningful connections across time-varying graphs, using both temporal and spatial features derived from a hidden Markov model (HMM). Mann–Whitney U tests assessed between-group differences in temporal and spatial features by age and TC practice using either healthy younger adult controls (YACs, n = 15), healthy older adult controls (OACs, n = 15), or Tai Chi older adult practitioners (TCOAs, n = 15). Our results showed that aging is associated with decreased within-network and between-network functional connectivity (FC) across most brain networks. Conversely, TC practice appears to mitigate these age-related declines, showing increased FC within and between networks in older adults who practice TC compared to non-practicing older adults. These findings suggest that TC practice may abate age-related declines in neural network efficiency and stability, highlighting its potential as a non-pharmacological intervention for promoting healthy brain aging. This study furthers the triple-network model, showing that a balancing and reorientation of attention might be engaged not only through higher-order and top-down mechanisms (i.e., FPN/DAN) but also via the coupling of bottom-up, sensory–motor (i.e., SMN/VIN) networks. [ABSTRACT FROM AUTHOR]

To detect damage in mechanical structures, acoustic emission (AE) inspection is considered as a powerful tool. Generally, the classical acoustic emission detection method uses a sparse sensor array to identify damage and its location. It often depends on a pre-defined wave velocity and it is difficult to yield a high localization accuracy for complicated structures using this method. In this paper, the passive guided wave phased array method, a dense sensor array method, is studied, aiming to obtain better AE localization accuracy in aluminum thin plates. Specifically, the proposed method uses a cross-shaped phased array enhanced with four additional far-end sensors for AE source localization. The proposed two-step method first calculates the real-time velocity and the polar angle of the AE source using the phased array algorithm, and then solves the location of the AE source with the additional far-end sensor. Both numerical and physical experiments on an aluminum flat panel are carried out to validate the proposed method. It is found that using the cross-shaped guided wave phased array method with enhanced far-end sensors can localize the coordinates of the AE source accurately without knowing the wave velocity in advance. The proposed method is also extended to a stiffened thin-walled structure with high localization accuracy, which validates its AE source localization ability for complicated structures. Finally, the influences of cross-shaped phased array element number and the time window length on the proposed method are discussed in detail. [ABSTRACT FROM AUTHOR]

The deconvolution DAMAS algorithm can effectively eliminate the misconceptions in the usually-used beamforming localization algorithm, allowing for a more accurate calculation of the source location as well as the intensity. When solving a linear system of equations, the DAMAS algorithm takes into account the mutual influence of different locations, reducing or even eliminating sidelobes and producing more accurate results. This work first introduces the principles of the DAMAS algorithm. Then it applies both the conventional beamforming algorithm and the DAMAS algorithm to simulate the localization of a single-frequency source from a 1.5 MW wind turbine, a complex line source with the text "UCAS" and a line source downstream of an airfoil trailing edge. Finally, the work presents experimental localization results of the source of a 1.5 MW wind turbine using both the conventional beamforming algorithm and the DAMAS algorithm. [ABSTRACT FROM AUTHOR]

Machine learning-based source range estimation is a promising method for enhancing the performance of tracking both the dynamic and static positions of targets in the underwater acoustic environment using extensive training data. This study constructed a machine learning model for source range estimation using ship-radiated noise recorded by two vertical line arrays (VLAs) during the Shallow-water Acoustic Variability Experiment (SAVEX-15), employing the Sample Covariance Matrix (SCM) and the Generalized Cross Correlation (GCC) as input features. A feed-forward neural network (FNN) was used to train the model on the acoustic characteristics of the source at various distances, and the range estimation results indicated that the SCM outperformed the GCC with lower error rates. Additionally, array tilt correction using the array invariant-based method improved range estimation accuracy. The impact of the training data composition corresponding to the bottom depth variation between the source and receivers on range estimation performance was also discussed. Furthermore, the estimated ranges from the two VLA locations were applied to localization using trilateration. Our results confirm that the SCM is the more appropriate feature for the FNN-based source range estimation model compared with the GCC and imply that ocean environment variability should be considered in developing a general-purpose machine learning model for underwater acoustics. [ABSTRACT FROM AUTHOR]

Depressive states in both healthy individuals and those with major depressive disorder exhibit differences primarily in symptom severity rather than symptom type, suggesting that there is a spectrum of depressive symptoms. The increasing prevalence of mild depression carries lifelong implications, emphasizing its clinical and social significance, which parallels that of moderate depression. Early intervention and psychotherapy have shown effective outcomes in subthreshold depression. Electroencephalography serves as a non-invasive, powerful tool in depression research, with many studies employing it to discover biomarkers and explore underlying mechanisms for the identification and diagnosis of depression. However, the efficacy of these biomarkers in distinguishing various depressive states in healthy individuals and in understanding the associated mechanisms remains uncertain. In our study, we examined the power spectrum density and the region-based phase-locking value in healthy individuals with various depressive states during their resting state. We found significant differences in neural activity, even among healthy individuals. Participants were categorized into high, middle, and low depressive state groups based on their response to a questionnaire, and eyes-open resting-state electroencephalography was conducted. We observed significant differences among the different depressive state groups in theta- and betaband power, as well as correlations in the theta–beta ratio in the frontal lobe and phase-locking connections in the frontal, parietal, and temporal lobes. Standardized low-resolution electromagnetic tomography analysis for source localization comparing the differences in resting-state networks among the three depressive state groups showed significant differences in the frontal and temporal lobes. We anticipate that our study will contribute to the development of effective biomarkers for the early detection and prevention of depression. [ABSTRACT FROM AUTHOR]

Objective. 3D-localization of gamma sources has the potential to improve the outcome of radio-guided surgery. The goal of this paper is to analyze the localization accuracy for point-like sources with a single coded aperture camera. Approach. We both simulated and measured a point-like 241 Am source at 17 positions distributed within the field of view of an experimental gamma camera. The setup includes a 0.11 mm thick Tungsten sheet with a MURA mask of rank 31 and pinholes of 0.08 mm in diameter and a detector based on the photon counting readout circuit Timepix3. Two methods, namely an iterative search including either a symmetric Gaussian fitting or an exponentially modified Gaussian fitting (EMG) and a center of mass method were compared to estimate the 3D source position. Main results. Considering the decreasing axial resolution with source-to-mask distance, the EMG improved the results by a factor of 4 compared to the Gaussian fitting based on the simulated data. Overall, we obtained a mean localization error of 0.77 mm on the simulated and 2.64 mm on the experimental data in the imaging range of 20 − 100 mm . Significance. This paper shows that despite the low axial resolution, point-like sources in the nearfield can be localized as well as with more sophisticated imaging devices such as stereo cameras. The influence of the source size and the photon count on the imaging and localization accuracy remains an important issue for further research. [ABSTRACT FROM AUTHOR]

The time difference of arrival based approach to wireless localization is perhaps one of the most interesting research subjects over the past decade. A method using copula function is proposed for source localization using TDOA measurements for both noncooperative and cooperative scheme. The proposed method is started with noncooperative localization, and finaly is extended to the cooperative localization problem. Because of unknown measurement noise covariance matrix, by using the theory of copulas with Sklar’s theorem, the joint likelihood function of TDOA measurements is coupled to the corresponding univariate marginal likelihood functions. Then, an attractive alternative using method of inference functions for margings is applied to the maximum likelihood estimation. The procedure involving maximization of univariate marginal likelihood functions and then estimation of copula parameter. The maximization suffers from noncovexity, so we apply semidefinite relaxation techniques to derive a convex estimator. Simulation results corroborate the performance of the proposed method as for sufficient signal to noise ratio, we observe one meter of improvement in source location accuracy.

With the development of society, security issues in various types of networks have become increasingly prominent, especially network propagation issues. Accurately locating the diffusion source points of network propagation is an important means to control network propagation. The research on the source location of network propagation also faces problems such as diverse network structure and complex dissemination mechanism. Therefore, this paper studies the problem of source location of network propagation based on graph neural networks, and an invertible graph diffusion model based on graph convolutional networks (GCNIGD) is proposed. In the stage of node susceptibility estimation, the graph convolutional neural network is combined to make full use of the structural information of the network considering the connection relationship between network nodes. In the stage of node feature construction, the graph diffusion theory is combined to spatially localize the information propagation in the network, so that the graph-based model can be enhanced by learning from multi-hop information. In the stage of source localization, the graph traceability problem is transformed into the inverse problem of graph diffusion, a reversible graph network is constructed to accurately estimate the source node, and the ill-posed problems in network traceability are solved. Finally, extensive experiments are conducted on six real-world datasets, and the results show that the proposed method outperforms the state-of-the-art methods. This study has important guiding significance for network security issues such as false information traceability, network attack traceability, etc.

Acoustic cameras (ACs) have become very popular in the last decade as an increasing number of applications in environmental acoustics are observed, which are mainly used to display the points of greatest noise emission of one or more sound sources. The results obtained are not yet certifiable because the beamforming algorithms or hardware behave differently under different measurement conditions, but at present, not enough studies have been dedicated to clarify the issues. The present study aims to provide a methodology to extract analytical features from sound maps obtained with ACs, which are generally only visual information. Based on the inputs obtained through a specific measurement campaign carried out with an AC and a known sound source in free field conditions, the present work elaborated a methodology for gathering the coordinates of the maximum emission point on screen, its distance from the real position of the source and the uncertainty associated with this position. The results obtained with the proposed method can be compared, thus acting as a basis for future comparison studies among calculations made with different beamforming algorithms or data gathered with different ACs in all real case scenarios. The method can be applicable to any other sector interested in gathering data from intensity maps not related to sound. [ABSTRACT FROM AUTHOR]

The objective of this paper is to present the performance of Direction of Arrival(DoA) estimation algorithms for underwater sound source localization using an acoustic Vector Sensor Array (VSA) that is developed by the National Institute of Ocean Technology, Chennai. Algorithms such as conventional beam forming, Multiple Signal Classification (MUSIC) with Eigen value decomposition, and MUSIC with Singular Value Decomposition (SVD) are used for estimation of DoA and performance study. An experiment has been conducted with the VSA at the Acoustic Test Facility of NIOT with the source transmission of 1 kHz to 5 kHz for different azimuth angles. The estimation of DoA using the above three algorithms and the comparison of the results on resolution and accuracy have been studied in detail in terms of the number of vector elements. Results reveal that the MUSIC method gives results with higher accuracy and resolution than the conventional method. The maximum deviation from the true angle in the conventional method is 4°; in MUSIC, it is 2°, whereas in MUSIC with SVD, it is 1°. While the standard MUSIC algorithm involves computing the eigenvectors of the covariance matrix, which can be computationally expensive, MUSIC with SVD provides a more efficient way to achieve better results. SVD enables straightforward computation of the signal subspace, making it more practical for real-time applications like coastal surveillance. Further to the laboratory experiment, the vector sensor system has been deployed in an open sea environment near the harbor and a known source experiment is carried out. The DoA estimated using MUSIC with SVD for the field data reveals that the results are in good comparison with the measured azimuth and elevation positions. The deviations in the field results are due to dynamic conditions of the ocean,and more sea trials need to be carried out for further study. [ABSTRACT FROM AUTHOR]

Accurate estimation of the position of the fault source in the aircraft engine is the key to achieve engine structural health monitoring (SHM). In this paper, a convolutional neural network and graph convolutional network (CNN–GCN)-based dual-sensor acoustic emission (AE) localization method is proposed for locating the fault source in the engine casing with multi-part coupling features. Firstly, the time–frequency map data sets of AE signals at different locations are established by using continuous wavelet transform to analyze the effect of multi-part coupling features on AE signals. Secondly, combined with its reverberation mode, multi-modal and dispersion characteristics, the effectiveness of CNN–GCN model is trained, verified and tested. Finally, the sensitivity of the localization results to the sensor types is analyzed, and the sensor combination mode with high localization accuracy is obtained. These results show that the proposed method in this paper can be used as an effective means for locating the fault source of the engine casing with complex coupling interface features. [ABSTRACT FROM AUTHOR]

Recently, VR-based training applications have become popular and promising, as they can simulate real-world situations in a safe, repeatable, and cost-effective way. For immersive simulations, various input devices have been designed and proposed to increase the effectiveness of training. In this study, we developed a novel device that generates 3D hand motion data and provides haptic force feedback for VR interactions. The proposed device can track 3D hand positions using a combination of the global position estimation of ultrasonic sensors and the hand pose estimation of inertial sensors in real time. For haptic feedback, shape–memory alloy (SMA) actuators were designed to provide kinesthetic forces and an efficient power control without an overheat problem. Our device improves upon the shortcomings of existing commercial devices in tracking and haptic capabilities such that it can track global 3D positions and estimate hand poses in a VR space without using an external suit or tracker. For better flexibility in handling and feeling physical objects compared to exoskeleton-based devices, we introduced an SMA-based actuator to control haptic forces. Overall, our device was designed and implemented as a lighter and less bulky glove which provides comparable accuracy and performance in generating 3D hand motion data for a VR training application (i.e., the use of a fire extinguisher), as demonstrated in the experimental results. [ABSTRACT FROM AUTHOR]

Microstate analysis of resting-state EEG is a unique data-driven method for identifying patterns of scalp potential topographies, or microstates, that reflect stable but transient periods of synchronized neural activity evolving dynamically over time. During infancy – a critical period of rapid brain development and plasticity – microstate analysis offers a unique opportunity for characterizing the spatial and temporal dynamics of brain activity. However, whether measurements derived from this approach (e.g., temporal properties, transition probabilities, neural sources) show strong psychometric properties (i.e., reliability) during infancy is unknown and key information for advancing our understanding of how microstates are shaped by early life experiences and whether they relate to individual differences in infant abilities. A lack of methodological resources for performing microstate analysis of infant EEG has further hindered adoption of this cutting-edge approach by infant researchers. As a result, in the current study, we systematically addressed these knowledge gaps and report that most microstate-based measurements of brain organization and functioning except for transition probabilities were stable with four minutes of video-watching resting-state data and highly internally consistent with just one minute. In addition to these results, we provide a step-by-step tutorial, accompanying website, and open-access data for performing microstate analysis using a free, user-friendly software called Cartool. Taken together, the current study supports the reliability and feasibility of using EEG microstate analysis to study infant brain development and increases the accessibility of this approach for the field of developmental neuroscience. [ABSTRACT FROM AUTHOR]

The error-related negativity (ERN) is a negative deflection in the electroencephalography (EEG) waveform at frontal-central scalp sites that occurs after error commission. The relationship between the ERN and broader patterns of brain activity measured across the entire scalp that support error processing during early childhood is unclear. We examined the relationship between the ERN and EEG microstates – whole-brain patterns of dynamically evolving scalp potential topographies that reflect periods of synchronized neural activity – during both a go/no-go task and resting-state in 90, 4-8-year-old children. The mean amplitude of the ERN was quantified during the -64 to 108 millisecond (ms) period of time relative to error commission, which was determined by data-driven microstate segmentation of error-related activity. We found that greater magnitude of the ERN associated with greater global explained variance (GEV; i.e., the percentage of total variance in the data explained by a given microstate) of an error-related microstate observed during the same -64 to 108 ms period (i.e., error-related microstate 3), and to greater anxiety risk as measured by parent-reported behavioral inhibition. During resting-state, six data-driven microstates were identified. Both greater magnitude of the ERN and greater GEV values of error-related microstate 3 associated with greater GEV values of resting-state microstate 4, which showed a frontal-central scalp topography. Source localization results revealed overlap between the underlying neural generators of error-related microstate 3 and resting-state microstate 4 and canonical brain networks (e.g., ventral attention) known to support the higher-order cognitive processes involved in error processing. Taken together, our results clarify how individual differences in error-related and intrinsic brain activity are related and enhance our understanding of developing brain network function and organization supporting error processing during early childhood. [ABSTRACT FROM AUTHOR]

Introduction: Transcranial photobiomodulation (tPBM) is a non-invasive neuromodulation technique that improves human cognition. The effects of tPBM of the right forehead on neurophysiological activity have been previously investigated using EEG in sensor space. However, the spatial resolution of these studies is limited. Magnetoencephalography (MEG) is known to facilitate a higher spatial resolution of brain source images. This study aimed to image post-tPBM effects in brain space based on both MEG and EEG measurements across the entire human brain. Methods: MEG and EEG scans were concurrently acquired for 6 min before and after 8-min of tPBM delivered using a 1,064-nm laser on the right forehead of 25 healthy participants. Group-level changes in both the MEG and EEG power spectral density with respect to the baseline (pre-tPBM) were quantified and averaged within each frequency band in the sensor space. Constrained modeling was used to generate MEG and EEG source images of post-tPBM, followed by cluster-based permutation analysis for family wise error correction (p < 0.05). Results: The 8-min tPBM enabled significant increases in alpha (8-12 Hz) and beta (13-30 Hz) powers across multiple cortical regions, as confirmed by MEG and EEG source images. Moreover, tPBM-enhanced oscillations in the beta band were located not only near the stimulation site but also in remote cerebral regions, including the frontal, parietal, and occipital regions, particularly on the ipsilateral side. Discussion: MEG and EEG results shown in this study demonstrated that tPBM modulates neurophysiological activity locally and in distant cortical areas. The EEG topographies reported in this study were consistent with previous observations. This study is the first to present MEG and EEG evidence of the electrophysiological effects of tPBM in the brain space, supporting the potential utility of tPBM in treating neurological diseases through the modulation of brain oscillations. [ABSTRACT FROM AUTHOR]

Memories of painful events constitute the basis for assessing patients' pain. This study explores the brain oscillatory activity during short‐term memorization of a nociceptive stimulus. High‐density EEG activity (128 electrodes) was recorded in 13 healthy subjects during a match‐to‐sample sensory discrimination task, whereby participants compared the intensity of a thumb‐located electric shock (S2) with a prior stimulus to the same location (S1) delivered 8–10 s earlier. Stimuli were above or below the individual nociceptive threshold. EEG activity with intracortical source localization via LORETA source reconstruction was analysed during the inter‐stimuli period and contrasted with a non‐memory‐related control task. The inter‐stimulus memorization phase was characterized by a focal alpha‐activity enhancement, significant during the nociceptive condition only, which progressed from bilateral occipital regions (cuneus and mid‐occipital gyri) during the first encoding—memorization phase towards the right‐superior and right mid‐temporal gyri during the 2–4 s immediately preceding S2. Initial alpha enhancement in occipital areas/cuneus is consistent with rapid non‐specific inhibition of task‐irrelevant visual processing during initial stimulus encoding. Its transfer to the right‐temporal regions was concomitant to the temporary upholding of the stimulus perceptual representation, previous to receiving S2, and suggests an active and local blockade of external interferences while these regions actively maintain internal information. These results add to a growing field indicating that alpha oscillations, while indicating local inhibitory processes, can also indirectly reveal active stimulus handling, including maintenance in short‐term memory buffers, by objectivizing the filtering out of irrelevant and potentially disrupting inputs in brain regions engaged in internally driven operations. [ABSTRACT FROM AUTHOR]

Human postural control system is inherently complex with nonlinear interaction among multiple subsystems. Accordingly, such postural control system has the flexibility in adaptation to complex environments. Previous studies applied complexity-based methods to analyze center of pressure (COP) to explore nonlinear dynamics of postural sway under changing environments, but direct evidence from central nervous system or muscular system is limited in the existing literature. Therefore, we assessed the fractal dimension of COP, surface electromyographic (sEMG) and electroencephalogram (EEG) signals under visual-vestibular habituation balance practice. We combined a rotating platform and a virtual reality headset to present visual-vestibular congruent or incongruent conditions. We asked participants to undergo repeated exposure to either congruent (n = 14) or incongruent condition (n = 13) five times while maintaining balance. We found repeated practice under both congruent and incongruent conditions increased the complexity of high-frequency (0.5--20 Hz) component of COP data and the complexity of sEMG data from tibialis anterior muscle. In contrast, repeated practice under conflicts decreased the complexity of low-frequency (<0.5 Hz) component of COP data and the complexity of EEG data of parietal and occipital lobes, while repeated practice under congruent environment decreased the complexity of EEG data of parietal and temporal lobes. These results suggested nonlinear dynamics of cortical activity differed after balance practice under congruent and incongruent environments. Also, we found a positive correlation (1) between the complexity of high-frequency component of COP and the complexity of sEMG signals from calf muscles, and (2) between the complexity of low-frequency component of COP and the complexity of EEG signals. These results suggested the low- or high-component of COP might be related to central or muscular adjustment of postural control, respectively. [ABSTRACT FROM AUTHOR]

The accuracy of passive hyperbolic localization applications using Time Difference of Arrival (TDOA) measurements can be severely compromised in non-line-of-sight (NLOS) situations. Consensus functions have been successfully used to provide robust and accurate location estimates in such challenging situations. In this paper, a fast branch-and-bound computational method for finding the global maximum of consensus functions is proposed and the global convergence property of the algorithm is mathematically proven. The performance of the method is illustrated by simulation experiments and real measurements. [ABSTRACT FROM AUTHOR]

This paper follows a detection-theoretic approach for using synthetic-aperture measurements, made at multiple moving passive receivers, in order to form an image showing the locations of stationary sources that are radiating unknown electromagnetic or acoustic waves. The paper starts with a physics-based model for the propagating fields, and, following the general approach of McWhorter et al (2023 arXiv:2302.06816, IEEE Open J. Signal Process. 4 437–51), derives a detection statistic that is used for the image formation. This detection statistic is a quadratic function of the data. Each point in the scene is tested as a possible hypothesized location for a source, and the detection statistic is plotted as a function of location. Because this image formation process is nonlinear, the standard linear methods for determining resolution cannot be applied. This paper shows how to analyze the detection image by first writing the noiseless image as a coherent sum of shifted complex ambiguity functions of the source waveform. The paper then develops a technique for calculating image resolution; resolution is found to depend on the sensor-source geometry and also on the properties (bandwidth and temporal duration) of the source waveform. Optimal filtering of the image is given, but a simple example suggests that optimal filtering may have little effect. Analysis is also given for the case in which multiple sources are present. [ABSTRACT FROM AUTHOR]

Electroencephalography (EEG) or Magnetoencephalography (MEG) source imaging aims to estimate the underlying activated brain sources to explain the observed EEG/MEG recordings. Solving the inverse problem of EEG/MEG Source Imaging (ESI) is challenging due to its ill-posed nature. To achieve a unique solution, it is essential to apply sophisticated regularization constraints to restrict the solution space. Traditionally, the design of regularization terms is based on assumptions about the spatiotemporal structure of the underlying source dynamics. In this paper, we propose a novel paradigm for ESI via an Explainable Deep Learning framework, termed as XDL-ESI, which connects the iterative optimization algorithm with deep learning architecture by unfolding the iterative updates with neural network modules. The proposed framework has the advantages of (1) establishing a data-driven approach to model the source solution structure instead of using hand-crafted regularization terms; (2) improving the robustness of source solutions by introducing a topological loss that leverages the geometric spatial information applying varying penalties on distinct localization errors; (3) improving the reconstruction efficiency and interpretability as it inherits the advantages from both the iterative optimization algorithms (interpretability) and deep learning approaches (function approximation). The proposed XDL-ESI framework provides an efficient, accurate, and interpretable paradigm to solve the ESI inverse problem with satisfactory performance in both simulated data and real clinical data. Specially, this approach is further validated using simultaneous EEG and intracranial EEG (iEEG).

Acoustic emission (AE) localization algorithms based on homogeneous media or single-velocity are less accurate when applied to the triaxial localization experiments. To the end, a robust triaxial localization method of AE source using refraction path is proposed. Firstly, the control equation of the refraction path is established according to the sensor coordinates and arrival times. Secondly, considering the influence of time-difference-of-arrival (TDOA) errors, the residual of the governing equation is calculated to estimate the equation weight. Thirdly, the refraction points in different directions are solved using Snell’s law and orthogonal constraints. Finally, the source coordinates are iteratively solved by weighted correction terms. The feasibility and accuracy of the proposed method are verified by pencil-lead breaking experiments. The simulation results show that the new method is almost unaffected by the refraction ratio, and always holds more stable and accurate positioning performance than the traditional method under different ratios and scales of TDOA outliers.

Studying the spatial response of a single-axis magnetometer could be the key parameter to optimize the ultimate performances of magnetic heads of detection. Indeed, the problem of non-orthogonality, misalignment, and 3D spatial response could be improved based on the knowledge of the 3D sensor spatial response. In that way, we have investigated the latter for our giant magneto-impedance (GMI) magnetometer, as a far-field pattern, by using a three-axis Helmholtz coil system. Firstly, we calibrate our device and secondly, we apply a specific 3D magnetic field to obtain this pattern. The latter helps to observe the directional or angular dependence of the sensor sensitivity versus the applied magnetic field, as we exemplified. The results confirm the excellent directivity of our off-diagonal GMI magnetometer. The evaluation of the associated error compared to an ideal vector magnetometer is also given and discussed.

Abstract Stereoelectroencephalography is a powerful intracerebral EEG recording method for the presurgical evaluation of epilepsy. It consists in implanting depth electrodes in the patient’s brain to record electrical activity and map the epileptogenic zone, which should be resected to render the patient seizure-free. Stereoelectroencephalography has high spatial accuracy and signal-to-noise ratio but remains limited in the coverage of the explored brain regions. Thus, the implantation might provide a suboptimal sampling of epileptogenic regions. We investigate the potential of improving a suboptimal stereoelectroencephalography recording by performing source localization on stereoelectroencephalography signals. We propose combining independent component analysis, connectivity measures to identify components of interest, and distributed source modelling. This approach was tested on two patients with two implantations each, the first failing to characterize the epileptogenic zone and the second giving a better diagnosis. We demonstrate that ictal and interictal source localization performed on the first stereoelectroencephalography recordings matches the findings of the second stereo-EEG exploration. Our findings suggest that independent component analysis followed by source localization on the topographies of interest is a promising method for retrieving the epileptogenic zone in case of suboptimal implantation.

The principle of Representational Similarity Analysis (RSA) posits that neural representations reflect the structure of encoded information, allowing exploration of spatial and temporal organization of brain information processing. Traditional RSA when applied to EEG or MEG data faces challenges in accessing activation time series at the brain source level due to modeling complexities and insufficient geometric/anatomical data.To overcome this, we introduce Representational Dissimilarity Component Analysis (ReDisCA), a method for estimating spatial–temporal components in EEG or MEG responses aligned with a target representational dissimilarity matrix (RDM). ReDisCA yields informative spatial filters and associated topographies, offering insights into the location of ”representationally relevant” sources. Applied to evoked response time series, ReDisCA produces temporal source activation profiles with the desired RDM. Importantly, while ReDisCA does not require inverse modeling its output is consistent with EEG and MEG observation equation and can be used as an input to rigorous source localization procedures.Demonstrating ReDisCA’s efficacy through simulations and comparison with conventional methods, we show superior source localization accuracy and apply the method to real EEG and MEG datasets, revealing physiologically plausible representational structures without inverse modeling. ReDisCA adds to the family of inverse modeling free methods such as independent component analysis (Makeig, 1995), Spatial spectral decomposition (Nikulin, 2011), and Source power comodulation (Dähne, 2014) designed for extraction sources with desired properties from EEG or MEG data. Extending its utility beyond EEG and MEG analysis, ReDisCA is likely to find application in fMRI data analysis and exploration of representational structures emerging in multilayered artificial neural networks.

Some passive sensors can provide only relative angles of a signal source. To obtain the signal source location, multiple passive sensors can be constructed into a passive sensor network through communication links. This paper investigates the source localization problem with angle-only measurements in three-dimensional space. First, we present an intersection localization method, which estimates the target position by minimizing the sum of distances between lines formed by angle-only measurements. It has the same target position estimate as the widely used least-squares (LS) method, but with a lower computational cost. Furthermore, considering the differences in measurement accuracy of sensors, the weighted least-squares (WLS) algorithm can achieve better localization performance than the LS method. Unfortunately, since the coefficient matrix and the noise vector are correlated, the WLS method is biased. The bias-compensation WLS (BCWLS) method is also presented in this paper to reduce the bias by estimating the correlation between the coefficient matrix and the pseudolinear noise vector. To evaluate the performance of the presented algorithms, numerical simulations are conducted, indicating that the superiority of the intersection localization method in computational cost and the superiority of the BCWLS method in localization accuracy. [ABSTRACT FROM AUTHOR]

Real-time source localization is crucial for high-end automation and artificial intelligence (AI) products. However, a low signal-to-noise ratio (SNR) and limited processing time can reduce localization accuracy. This work proposes a new architecture for a time-domain feedback-based beamformer that meets real-time processing demands. The main objective of this design is to locate reflective sources by estimating their direction of arrival (DOA) and signal range. Incorporating a feedback mechanism in this architecture refines localization precision, a unique aspect of this approach. We conducted an in-depth analysis to compare the effectiveness of time-domain feedback beamforming against conventional time-domain methods, highlighting their benefits and limitations. Our evaluation of the proposed architecture, based on critical performance indicators such as peak-to-sidelobe ratio, mainlobe width, and directivity factor, demonstrates its ability to improve beamformer effectiveness significantly. [ABSTRACT FROM AUTHOR]

A comprehensive analysis and simulation of two memristor-based neuromorphic architectures for nuclear radiation detection is presented. Both scalable architectures retrofit a locally competitive algorithm to solve overcomplete sparse approximation problems by harnessing memristor crossbar execution of vector–matrix multiplications. The proposed systems demonstrate excellent accuracy and throughput while consuming minimal energy for radionuclide detection. To ensure that the simulation results of our proposed hardware are realistic, the memristor parameters are chosen from our own fabricated memristor devices. Based on these results, we conclude that memristor-based computing is the preeminent technology for a radiation detection platform. [ABSTRACT FROM AUTHOR]

The identification of the origin of diffusion processes in complex networks is a subject of significant interest across numerous interdisciplinary fields. One approach to solving this issue involves the placement of a few observer nodes within the network and the estimation of the unknown source through the utilization of information gathered by these observer nodes. However, this approach presents certain drawbacks, particularly with regard to computational complexity. To address this limitation, this study introduces an innovative Hill-Climbing algorithm designed to efficiently identify diffusion sources within large-scale complex networks. Our approach, the Local Search Hill Climbing (LSHC) method, transforms the source localization problem into an optimization task, utilizing strategically deployed observer nodes. Experiments conducted on both random and scale-free network models demonstrate that our method significantly reduces computational time while maintaining high accuracy in pinpointing the diffusion source. This approach offers a substantial improvement over traditional methods and holds considerable promise for practical applications in network science. [ABSTRACT FROM AUTHOR]

• In contests, overbidding is widespread. • Group identity can alleviate overbidding. • Frontal lobes activated pre-group identity task, increased right temporal lobe activation post-task. • Functional connectivity in social brain regions changes before and after the group identity task. Contests may be highly effective in eliciting high levels of effort, but they also carry the risk of inefficient resource allocation due to excessive effort (overbidding), squandering valuable social resources. While a growing body of research has focused on how group identity exacerbates out-group conflict, its influence on in-group conflict remains relatively unexplored. This study endeavors to explore the impact of group identity on conflicts within and between groups in competitive environments, thereby addressing gaps in the current research landscape and dissecting the involved neurobiological mechanisms. By employing source localization and functional connectivity techniques, our research aims to identify the brain regions involved in competitive decision-making and group identity processes, as well as the functional connectivities between social brain areas. The results of our investigation revealed that participants exhibited activation in the bilateral frontal and prefrontal lobes during the bidding behavior before the group identity task. Subsequently, after the task, additional activation was observed in the right temporal lobe. Results from functional connectivity studies indicated that group identity tasks modify decision-making processes by promoting group norms, empathy, and blurred self-other boundaries for in-group decisions, while out-group decisions after the group identity task see heightened cognitive control, an increased dependence on rational judgment, introspection of self-environment relationships, and a greater focus on anticipating others' behaviors. This study reveals the widespread occurrence of overbidding behavior and demonstrates the role of group identity in mitigating this phenomenon, concurrently providing a comprehensive analysis of the underlying neural mechanisms. [ABSTRACT FROM AUTHOR]

Angle-of-arrival (AOA) measurements are often used in underwater acoustical localization. Different from the traditional AOA model based on azimuth and elevation measurements, the AOA model studied in this paper uses bearing measurements. It is also often used in the Ultra-Short Baseline system (USBL). However, traditional acoustical localization needs additional range information. If the range information is unavailable, the closed-form solution is difficult to obtain only with bearing measurements. Thus, a localization closed-form solution using only bearing measurements is explored in this article. A pseudo-linear measurement model between the source position and the bearing measurements is derived, and considering the nonlinear relationship of the parameters, a weighted least-squares optimization equation based on multiple constraints is established. Different from the traditional two-step least-squares method, the semidefinite programming (SDP) method is designed to obtain the initial solution, and then a bias compensation method is proposed to further minimize localization errors based on the SDP result. Numerical simulations show that the performance of the proposed method can achieve Cramer–Rao lower bound (CRLB) accuracy. The field test also proves that the proposed method can locate the source position without range measurements and obtain the highest positioning accuracy. [ABSTRACT FROM AUTHOR]

[Display omitted] • We extended the theory of the sLORETA standardization to make it applicable to a class of hierarchical Bayesian methods. • Applying standardization to hierarchical adaptive L1 regression, we obtain increased localization accuracy and noise robustness. • With the new L1 regularized method, we found the epileptic sources within 1 cm accuracy in epilepsy patients. To investigate the ability of standardization to reduce source localization errors and measurement noise uncertainties for hierarchical Bayesian algorithms with L 1 - and L 2 -norms as priors in electroencephalography and magnetoencephalography of focal epilepsy. Description of the standardization methodology relying on the Hierarchical Bayesian framework, referred to as the Standardized Hierarchical Adaptive Lp-norm Regularization (SHALpR). The performance was tested using real data from two focal epilepsy patients. Simulated data that resembled the available real data was constructed for further localization and noise robustness investigation. The proposed algorithms were compared to their non-standardized counterparts, Standardized low-resolution brain electromagnetic tomography, Standardized Shrinking LORETA-FOCUSS, and Dynamic statistical parametric maps. Based on the simulations, the standardized Hierarchical adaptive algorithm using L 2 -norm was noise robust for 10 dB signal-to-noise ratio (SNR), whereas the L 1 -norm prior worked robustly also with 5 dB SNR. The accuracy of the standardized L 1 -normed methodology to localize focal activity was under 1 cm for both patients. Numerical results of the proposed methodology display improved localization and noise robustness. The proposed methodology also outperformed the compared methods when dealing with real data. The proposed standardized methodology, especially when employing the L 1 -norm, could serve as a valuable assessment tool in surgical decision-making. [ABSTRACT FROM AUTHOR]

Studying the spatial response of a single-axis magnetometer could be the key parameter to optimize the ultimate performances of magnetic heads of detection. Indeed, the problem of non-orthogonality, misalignment, and 3D spatial response could be improved based on the knowledge of the 3D sensor spatial response. In that way, we have investigated the latter for our giant magneto-impedance (GMI) magnetometer, as a far-field pattern, by using a three-axis Helmholtz coil system. Firstly, we calibrate our device and secondly, we apply a specific 3D magnetic field to obtain this pattern. The latter helps to observe the directional or angular dependence of the sensor sensitivity versus the applied magnetic field, as we exemplified. The results confirm the excellent directivity of our off-diagonal GMI magnetometer. The evaluation of the associated error compared to an ideal vector magnetometer is also given and discussed. [ABSTRACT FROM AUTHOR]

Stereoelectroencephalography is a powerful intracerebral EEG recording method for the presurgical evaluation of epilepsy. It consists in implanting depth electrodes in the patient’s brain to record electrical activity and map the epileptogenic zone, which should be resected to render the patient seizure-free. Stereoelectroencephalography has high spatial accuracy and signal-to-noise ratio but remains limited in the coverage of the explored brain regions. Thus, the implantation might provide a suboptimal sampling of epileptogenic regions. We investigate the potential of improving a suboptimal stereoelectroencephalography recording by performing source localization on stereoelectroencephalography signals. We propose combining independent component analysis, connectivity measures to identify components of interest, and distributed source modelling. This approach was tested on two patients with two implantations each, the first failing to characterize the epileptogenic zone and the second giving a better diagnosis. We demonstrate that ictal and interictal source localization performed on the first stereoelectroencephalography recordings matches the findings of the second stereo-EEG exploration. Our findings suggest that independent component analysis followed by source localization on the topographies of interest is a promising method for retrieving the epileptogenic zone in case of suboptimal implantation. [ABSTRACT FROM AUTHOR]

We propose methods for estimation of the number of the sources and their localization in complex mechanical systems. These methods are based on the matching vibrational field obtained using finite element modeling with the measured field from vibration sensors. A modification of the MUSIC (Multiple Signal Classification) algorithm, which is often employed in direction-of-arrival estimation of wavefield sources, is effectively used to localize several simultaneously operating sources of vibration. Numerical simulation and experimental testing in mechanical systems showed the superior efficiency of the proposed method in comparison with the methods previously used to solve similar problems. [ABSTRACT FROM AUTHOR]

Localizing eloquent cortices is crucial for many neurosurgical applications, such as epilepsy and tumor resections. Clinicians may use non-invasive methods such as magnetoencephalography (MEG) to localize these cortical regions using equivalent current dipoles (ECDs). While dipoles are clinically validated, they provide the estimated strength, location, and orientation of only one or a few sources that best describe the recorded neuromagnetic data, requiring clinicians to make subjective decisions on the spatial extent of the underlying cortical area. More accurate delineation of eloquent cortical areas using distributed source localization methods would provide additional pre-surgical information on these regions’ location and spatial distribution, which could lead to reduced post-surgical complications associated with damage to or removal of eloquent cortices. Our objective in this paper was to present a method to post-process the distributed source localization results to yield a directly interpretable, distributed region of activation. As a test case, we selected somatosensory stimulation in a retrospective cohort of focal and multi-focal epilepsy patients. Our algorithm performs source localization using a distributed method (sLORETA), followed by post-processing and blind source separation to identify the area and boundary of the cortical tissue that primarily activates in response to somatosensory stimulation. We calculated the statistical significance of localization by comparing the identified region to an anatomical atlas and random chance. While examining patients who received left (upper left, UL) and right (upper right, UR) sided median nerve stimulation, the cortical areas identified by the algorithm were in anatomically appropriate areas with a median overlap of 97.6% and 94.7%, respectively. We observe that our algorithm localized somatosensory responses better than random chance in 57/58 (98%) patients who performed the UL task (p

IntroductionTranscranial photobiomodulation (tPBM) is a non-invasive neuromodulation technique that improves human cognition. The effects of tPBM of the right forehead on neurophysiological activity have been previously investigated using EEG in sensor space. However, the spatial resolution of these studies is limited. Magnetoencephalography (MEG) is known to facilitate a higher spatial resolution of brain source images. This study aimed to image post-tPBM effects in brain space based on both MEG and EEG measurements across the entire human brain.MethodsMEG and EEG scans were concurrently acquired for 6 min before and after 8-min of tPBM delivered using a 1,064-nm laser on the right forehead of 25 healthy participants. Group-level changes in both the MEG and EEG power spectral density with respect to the baseline (pre-tPBM) were quantified and averaged within each frequency band in the sensor space. Constrained modeling was used to generate MEG and EEG source images of post-tPBM, followed by cluster-based permutation analysis for family wise error correction (p < 0.05).ResultsThe 8-min tPBM enabled significant increases in alpha (8–12 Hz) and beta (13–30 Hz) powers across multiple cortical regions, as confirmed by MEG and EEG source images. Moreover, tPBM-enhanced oscillations in the beta band were located not only near the stimulation site but also in remote cerebral regions, including the frontal, parietal, and occipital regions, particularly on the ipsilateral side.DiscussionMEG and EEG results shown in this study demonstrated that tPBM modulates neurophysiological activity locally and in distant cortical areas. The EEG topographies reported in this study were consistent with previous observations. This study is the first to present MEG and EEG evidence of the electrophysiological effects of tPBM in the brain space, supporting the potential utility of tPBM in treating neurological diseases through the modulation of brain oscillations.

A source localization of a chemical gas dispersion is important to understand the situation and facilitate effective responses to incidents. The source point can be simply identified on a map assuming an infinite number of chemical sensors in every region. However, it is limited to manufacture and install a number of sensors due to the several conditions. Consequently, when dispersion begins in a region without sensors, tracking the movement of chemical gas cloud and pinpointing its origin is challenging since obtaining information during the early stages of an incident is difficult. Therefore, this study proposes a recursive tracking model based on a transformer for the source localization of a chemical gas dispersion. This machine learning model recursively tracks the past spatial dispersion distribution using sequential frames from a chemical concentration map. When N sequential image frames $(C_{1}, C_{2}, \ldots, C_{N})$ are input, the model outputs a single image frame $(C_{0})$ , which represents the image frame prior to the input time sequence. Thus, the model predicts the origin by successively predicting past image frames. The gas concentration data for this study were sourced from a gas dispersion model based on Fick’s law. For each scenario, 15000 datasets were generated to train and test the model, each dataset comprising 15 image frames that describe various aspects of gas dispersion. The performance of source localization was assessed based on accuracy. The model was validated using 1500 test data obtained from the model based on Fick’s law and 100 test data obtained from the Nuclear Biological Chemical Reporting and Modeling System (NBC_RAMS).

In recent years, the research has focused firmly on Autonomous Aerial Vehicles (AAVs) owing to their vast array of potential applications, to aid those applications this study presents a technical approach for source localization and landing trajectory identification for Autonomous Aerial Vehicle (AAV) landing, leveraging computer vision and photogrammetry techniques. The proposed method aims to achieve accurate and robust localization of the landing target area and precise determination of the AAV’s landing trajectory. The source localization module utilizes a computer vision system equipped with onboard cameras and advanced image processing algorithms. The system captures images of the target area and performs feature extraction and matching to estimate the position of the landing target. Additionally, the A* algorithm serves as a pivotal tool in deriving an optimized trajectory by harnessing the relative positions of the Autonomous Aerial Vehicle (AAV) and the designated landing target.

Background. Accuracy and reliability of methods for spatial localization of brain activity based on electroencephalography (EEG) data do not lose relevance. Existing localization methods are coupled to specific difficulties due to ambiguity of the resulting solution.Ojective: verification of a new method for localizing brain activity using EEG data «Virtually Implanted Electrode» and demonstratoin of its capabilities.Material and methods. The new method was verified using deep brain stimulation (DBS) data. There were used the data from scalp electrical activity induced solely by potentials from two electrodes implanted into deep areas of human brain. It was achieved by filtering EEG signals at the stimulation frequency and excluding signals from other brain areas. A clinical case of applying the new method for EEG analysis of patient paroxysmal activity is presented as well.Results. «Virtually Implanted Electrode» method allowed to quite accurately determine the localization of DBS current sources. The effectiveness of using the method for analyzing the mechanisms of paroxysmal activity was demonstrated: based on change in potentials calculated in 33 sites of the brain (brain areas), three groups of areas were identified specifically contributing to development of paroxysmal activity. For comparison, the same artificial DBS sources were localized using other verified methods: the BrainLoc (Russia) and sLORETA (Switzerland) software providing substantially worse data.Conclusion. Identifying spatial localization of electrical potentials recorded on the scalp surface by using the new approach with the «Virtually Implanted Electrode» method shows high efficiency and reliability, demonstrating a clear advantage over other known localization methods.

Knowledge about brain source localizations for religious states of mind is still limited. Previous studies have usually not set a direct emphasis on experience. The present study investigated the phenomenon of religious experience using inverse solution calculations, and it is one of the first to measure the dimension of experience directly. A total of 60 evangelical Christians participated in an experiment where they were asked to engage in worship and try to connect with God. Using a bar slider, the participants continuously rated how strongly they sensed God’s presence at any given moment. A selection of songs helped to induce the desired experience. Measurements were made using EEG with 64 electrodes and inverse solutions were calculated with sLORETA. We appropriated two mutually compatible hypotheses from the literature pertaining to religious experiences: the executive inhibition hypothesis (reformulated as the frontal relaxation hypothesis) and the temporal involvement hypothesis. Our results did not yield any information about the frontal areas; however, they indicated that the right temporal cortex appeared to be involved during the experience.

Acoustic emission (AE) source localization technology, since the early application to one-dimensional structures, has been extended to a wide range of applications to two-dimensional (2D) structures, including isotropic and anisotropic materials, which are currently the most widely studied and the most mature. With the development of AE source localization technology, more and more significant challenges have arisen for three-dimensional (3D) structures, which are mostly anisotropic and have complex propagation paths. This paper summarizes and discusses the AE source localization methods in different dimensions as well as their applications, including the main methods for 2D AE source localization, such as the triangulation method, beam forming, strain rosette technique, modal AE, artificial neural network, optimization and the time reversal technique, as well as state-of-the-art AE source localization methods in isotropic and anisotropic structures utilizing these methods. Recent advances in AE source localization in complex 3D structures are also reviewed.