Search

Introduction. Laboratory participation in external quality assessment (EQA) programmes including proficiency testing (PT) is a requirement of clinical laboratory conformance to ISO 15189:2022 Medical laboratories - Requirements for quality and competence . PT is one EQA method whereby laboratories are sent blinded samples for characterization by routine laboratory diagnostic methods. Importantly, PT enables a laboratory's performance to be evaluated in comparison to the standard reference methods and to the performance of other peer laboratories using similar diagnostic methods. Gap statement. The desired outcome of participating in PT is to help laboratories identify possible sources of error in each step of the total testing process and particularly in their test methods during the analytical phase. Aim. This cross-sectional study investigated the impact of using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) compared to conventional phenotypic biochemical testing on laboratory performance in a clinical bacteriology PT scheme. Methodology. During a 6-year period from 2017-2022, the Canadian Microbiology Proficiency Testing implemented 112 PT challenges comprising 22 different sample types and included 61 different bacterial species. This was translated into 5883 graded test events for analysis. Multiple logistic regression techniques were employed to explore the association between the test method employed and laboratory performance. The sample type and aerobic classification of challenge organisms were included as confounding variables. Results. Laboratories using MALDI-TOF MS performed significantly better in characterizing microorganisms than laboratories using phenotypic biochemical testing alone [odds ratio OR = 5.68, confidence interval (CI): 3.92, 8.22] regardless of the sample type and aerobic classification. Notably, our analysis identified a significant association between anaerobic organisms and laboratory performance (OR: 0.24, CI: 0.17-0.35), suggesting that culturing and identifying fastidious organisms remains a significant obstacle for many clinical microbiology laboratories. Conclusions. Although no method is infallible and its performance will depend on the validation and quality assurance procedures, this finding may help the management in the decision for implementing MALDI-TOF MS in the microbiology laboratory. This study highlights the important role PT providers play in the objective assessment of laboratory performance and how it can provide evidence for quality improvement.

Newborn screening (NBS) for congenital adrenal hyperplasia (CAH) based on hormonal testing is successfully implemented in many countries. However, this method cannot detect non-classic CAH and has high false positive rates. We have developed a novel MALDI-TOF MS assay that can identify common variants and deletions of CYP21A2 in the Chinese population. Thirty-seven clinical patients with CAH confirmed by Sanger sequencing and MLPA analysis were detected by MALDI-TOF MS assay. Two CYP21A2 variants were detected in 30 patients and one CYP21A2 variant was detected in 7 patients. The MALDI-TOF MS assay detected 67 mutant alleles in 37 patients with a detection rate of 90.5%. Sanger sequencing revealed that three variants in seven patients were not included in the designed panel. Eleven distinct CYP21A2 variants were identified, including five missense variants, two nonsense variants, two large gene deletions, one splice variant, and one frameshift variant. The most frequent variant was c.293-13C > G (37.84%), followed by c.518T > A (21.62%) and exon 1-7 deletion (17.57%). The high-throughput MALDI-TOF MS assay that can simultaneously detect common variants and deletions of CYP21A2. This assay can be used for population-based genetic screening and rapid detection of suspected patients, and is expected to be a valuable complement to biochemical-based testing for the detection of CAH., Competing Interests: Declaration of Competing interest The authors declare no competing interests., (Copyright © 2024. Published by Elsevier Masson SAS.)

Desorption/ionization mass spectrometry (DI-MS) approaches allow for the rapid quantification of drugs in biological matrices using assays that can be validated according to regulatory guidelines. However, specific adaptations must be applied to create reliable quantification methods, depending on the approach and instrumentation used. In the present article, we demonstrate the importance of the molecular weight, the fragmentation pattern, and the purity of the internal standard for the development of matrix-assisted laser desorption/ionization (MALDI)-ion mobility (IM)-tandem MS and MS/MS methods. We present preliminary results of method development for the quantification of selinexor in microdialysis fluids with a stable isotopically labeled internal standard. In addition, we discuss the selection of internal standards for MALDI-MS assays using different instrumentations.

Intact (whole) cell matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) is an established method for biotyping in clinical microbiology as well as for revealing phenotypic shifts in cultured eukaryotic cells. Intact cell MALDI-TOF MS has recently been introduced as a quality control tool for long-term cultures of pluripotent stem cells. Despite the potential this method holds for revealing minute changes in cells, there is still a need for improving the ionization efficiency or peak reproducibility. Here we report for the first time that supplementation by fine particles of black phosphorus to the standard MALDI matrices, such as sinapinic and α-cyano-4-hydroxycinnamic acids enhance intensities of mass spectra of particular amino acids and peptides, presumably by interactions with aromatic groups within the molecules. In addition, the particles of black phosphorus induce the formation of small and regularly dispersed crystals of sinapinic acid and α-cyano-4-hydroxycinnamic acid with the analyte on a steel MALDI target plate. Patterns of mass spectra recorded from intact cells using black phosphorus-enriched matrix were more reproducible and contained peaks of higher intensities when compared to matrix without black phosphorus supplementation. In summary, enrichment of common organic matrices by black phosphorus can improve discrimination data analysis by enhancing peak intensity and reproducibility of mass spectra acquired from intact cells., (© 2022. The Author(s).)

Cell-based assays for compound screening and profiling are fundamentally important in life sciences, chemical biology and pharmaceutical research. Most cell assays measure the amount of a single reporter molecule or cellular endpoint, and require the use of fluorescence or other labeled materials. Consequently, there is high demand for label-free technologies that enable multiple biomolecules or endpoints to be measured simultaneously. Here, we describe how to develop, optimize and validate MALDI-TOF mass spectrometry (MS) cell assays that can be used to measure cellular uptake of transporter substrates, to monitor cellular drug target engagement or to discover cellular drug-response markers. In uptake assays, intracellular accumulation of a transporter substrate and its inhibition by test compounds is measured. In drug response assays, changes to multiple cellular metabolites or to abundant posttranslational protein modifications are monitored as reporters of drug activity. We detail a ten-part optimization protocol with every part taking 1-2 d that leads to a final 2 d optimized procedure, which includes cell treatment, transfer, MALDI MS-specific sample preparation, quantification using stable-isotope-labeled standards, MALDI-TOF MS data acquisition, data processing and analysis. Key considerations for validation and automation of MALDI-TOF MS cell assays are outlined. Overall, label-free MS cell-based assays offer speed, sensitivity, accuracy and versatility in drug research., (© 2021. The Author(s), under exclusive licence to Springer Nature Limited.)

As severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) infections continue, there is a substantial need for cost-effective and large-scale testing that utilizes specimens that can be readily collected from both symptomatic and asymptomatic individuals in various community settings. Although multiple diagnostic methods utilize nasopharyngeal specimens, saliva specimens represent an attractive alternative as they can rapidly and safely be collected from different populations. While saliva has been described as an acceptable clinical matrix for the detection of SARS-CoV-2, evaluations of analytic performance across platforms for this specimen type are limited. Here, we used a novel sensitive RT-PCR/MALDI-TOF mass spectrometry-based assay (Agena MassARRAY®) to detect SARS-CoV-2 in saliva specimens. The platform demonstrated high diagnostic sensitivity and specificity when compared to matched patient upper respiratory specimens. We also evaluated the analytical sensitivity of the platform and determined the limit of detection of the assay to be 1562.5 copies/ml. Furthermore, across the five individual target components of this assay, there was a range in analytic sensitivities for each target with the N2 target being the most sensitive. Overall, this system also demonstrated comparable performance when compared to the detection of SARS-CoV-2 RNA in saliva by the cobas® 6800/8800 SARS-CoV-2 real-time RT-PCR Test (Roche). Together, we demonstrate that saliva represents an appropriate matrix for SARS-CoV-2 detection on the novel Agena system as well as on a conventional real-time RT-PCR assay. We conclude that the MassARRAY® system is a sensitive and reliable platform for SARS-CoV-2 detection in saliva, offering scalable throughput in a large variety of clinical laboratory settings., (© 2021 Wiley Periodicals LLC.)

Post-mortem metabolism is widely recognized to cause rapid and prolonged changes in the concentrations of multiple classes of compounds in brain, that is, they are labile. Post-mortem changes from levels in living brain include components of pathways of metabolism of glucose and energy compounds, amino acids, lipids, signaling molecules, neuropeptides, phosphoproteins, and proteins. Methods that stop enzyme activity at brain harvest were developed almost 50 years ago and have been extensively used in studies of brain functions and diseases. Unfortunately, these methods are not commonly used to harvest brain tissue for mass spectrometry-based metabolomic studies or for imaging mass spectrometry studies (IMS, also called mass spectrometry imaging, MSI, or matrix-assisted laser desorption/ionization-MSI, MALDI-MSI). Instead these studies commonly kill animals, decapitate, dissect out brain and regions of interest if needed, then 'snap' freeze the tissue to stop enzymatic activity after harvest, with post-mortem intervals typically ranging from ~0.5 to 3 min. To increase awareness of the importance of stopping metabolism at harvest and preventing the unnecessary complications of not doing so, this commentary provides examples of labile metabolites and the magnitudes of their post-mortem changes in concentrations during brain harvest. Brain harvest methods that stop metabolism at harvest eliminate post-mortem enzymatic activities and can improve characterization of normal and diseased brain. In addition, metabolomic studies would be improved by reporting absolute units of concentration along with normalized peak areas or fold changes. Then reported values can be evaluated and compared with the extensive neurochemical literature to help prevent reporting of artifactual data., (© 2021 International Society for Neurochemistry.)

We optimized and prospectively evaluated a simple MALDI-TOF MS-based method for direct detection of third-generation oxymino-cephalosporin resistance (3rd CephR) in Escherichia coli and Klebsiella spp. from blood cultures (BC). In addition, we assessed the performance of a lateral flow immunochromatographic assay (LFIC) for detecting extended-spectrum β-lactamases (ESBL) (NG-Test CTX-M MULTI assay) using bacterial pellets from BC. A total of 168 BCs from unique patients were included. A pre-established volume of BC flagged as positive was transferred in brain heart infusion with or without ceftriaxone (2 mg/ml). After 2-h incubation, intact bacterial pellets were used for MALDI-TOF MS testing. Identification of bacterial species (index score > 2) in the presence of CRO was considered marker of 3rd CephR. The LFIC assay was evaluated in 141 BC. Bacteremia episodes were caused by E. coli (n = 115) or Klebsiella spp. (n = 53). A total of 49 strains were 3rd CephR by broth microdilution, of which 41 were ESBL producers, seven expressed ESBL and OXA-48 type D carbapenemase, and one harbored a plasmid-mediated AmpC. The MALDI-TOF MS method yielded four very major errors (false susceptibility) and two major errors (false resistance). The overall sensitivity of the assay was 91.8% and the specificity 98.3%. Concordance between the LFIC assay and the MALDI-TOF MS method for detection of ESBL-mediated 3rd CephR was 100%. Both evaluated methods may prove useful for early adjustment of empirical therapy in patients with E. coli and Klebsiella spp. bloodstream infections. Whether their use has a beneficial impact on patient outcomes is currently under investigation., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

The use of matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry has proven to be rapid and accurate for the majority of clinical isolates. Some gaps remain concerning rare, emerging, or highly pathogenic species, showing the need to continuously expand the databases. In this multicenter study, we evaluated the accuracy of the VITEK MS v3.2 database in identifying 1172 unique isolates compared to identification by DNA sequence analysis. A total of 93.6% of the isolates were identified to species or group/complex level. A remaining 5.2% of the isolates were identified to the genus level. Forty tests gave a result of no identification (0.9%) and 12 tests (0.3%) gave a discordant identification compared to the reference identification. VITEK MS is also the first MALDI-TOF MS system that is able to delineate the four members of the Acinetobacter baumannii complex at species level without any specific protocol or special analysis method. These findings demonstrate that the VITEK MS v3.2 database is highly accurate for the identification of bacteria and fungi encountered in the clinical laboratory as well as emerging species like Candida auris and the highly pathogenic Brucella species., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Background: Accurate and early identification of dermatophytes enables prompt antifungal therapy. However, phenotypic and molecular identification methods are time-consuming. MALDI-TOF MS-based identification is rapid, but an optimum protocol is not available., Objectives: To develop and validate an optimum protein extraction protocol for the efficient and accurate identification of dermatophytes by MALDI-TOF MS., Materials/methods: Trichophyton mentagrophytes complex (n = 4), T. rubrum (n = 4) and Microsporum gypseum (n = 4) were used for the optimisation of protein extraction protocols. Thirteen different methods were evaluated. A total of 125 DNA sequence confirmed clinical isolates of dermatophytes were used to create and expand the existing database. The accuracy of the created database was checked by visual inspection of MALDI spectra, MSP dendrogram and composite correlation index matrix analysis. The protocol was validated further using 234 isolates., Result: Among 13 protein extraction methods, six correctly identified dermatophytes but with a low log score (≤1.0). The modified extraction protocol developed provided an elevated log score of 1.6. Significant log score difference was observed between the modified protocol and other existing protocols (T. mentagrophytes complex: 1.6 vs. 0.2-1.0, p < .001; T. rubrum: 1.6 vs. 0.4-1.0, p < .001; M. gypseum:1.6 vs. 0.2-1.0, p < .001). Expansion of the database enabled the identification of all 234 isolates (73.5% with log score ≥2.0 and 26.4% with log scores range: 1.75-1.99). The results were comparable to DNA sequence-based identification., Conclusion: MALDI-TOF MS with an updated database and efficient protein extraction protocol developed in this study can identify dermatophytes accurately and also reduce the time for identifying them., (© 2021 Wiley-VCH GmbH.)

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a highly reliable and efficient technology for the identification of microbial pathogens. We previously found that 40% humidity was the optimal condition for the preparation of samples (co-crystallization of the sample and matrix) for serum peptidomic analysis via MALDI-TOF MS profiling. This optimum temperature was applied to obtain the highest reproducibility and throughput and greatest number of peaks. We therefore hypothesized that humidity control was also essential for MALDI-TOF MS bacterial identification. In this study, we constructed a simple sample preparation device that enables humidity control and used it for co-crystallization of the sample and matrix. Identification scores for five Gram-negative bacteria and six Gram-positive bacteria were determined using the MALDI BioTyper® system at three humidity ranges (10-20%, 30-40%, and 50-60%). As a result, higher identification scores were obtained at 30-40% humidity than at 10-20% or 50-60% humidity. At 30-40% humidity, 517/550 (94.0%) isolates scored greater than 2.0, indicating the success of species-level identification. Similarly, 537/550 (97.6%) isolates scored greater than 1.7, indicating the success of genus-level identification. Thus, 30-40% humidity generated optimal MALDI-TOF MS identification scores and the highest percentage of correct identifications. These results could lead to further improvements in the accuracy of MALDI-TOF MS bacterial identification., (Copyright © 2021. Published by Elsevier B.V.)

Klebsiella pathogens affect human and animal health and are widely distributed in the environment. Among these, the Klebsiella pneumoniae species complex, which includes seven phylogroups, is an important cause of community and hospital infections. The Klebsiella oxytoca species complex also causes hospital infections and antibiotic-associated haemorrhagic colitis. The unsuitability of currently used clinical microbiology methods to distinguish species within each of these species complexes leads to high rates of misidentifications that are masking the true clinical significance and potential epidemiological specificities of individual species. We developed a web-based tool, Klebsiella MALDI TypeR, a platform-independent and user-friendly application that enables uploading MALDI-TOF mass spectrometry data in order to identify Klebsiella isolates at the species complex and phylogroup levels. The tool, available at https://maldityper.pasteur.fr/, leverages a database of previously identified biomarkers that are specific for species complexes, individual phylogroups, or related phylogroups. We obtained 84%-100% identification accuracy depending on phylogroup. Identification results are obtained in a few seconds from batches of uploaded spectral data. Klebsiella MALDI TypeR enables fast and reliable identification of Klebsiella strains that are often misidentified with standard microbiological methods. This web-based identification tool may be extended in the future to other human bacterial pathogens., (Copyright © 2021 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.)

Mosquitoes are the main arthropod vectors of human pathogens. The current methods for mosquito identification include morphological and molecular methods. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), now routinely used for bacterial identification, has recently emerged in the field of entomology. The aim of this study was to use MALDI-TOF MS to identify mosquito colonies from French Polynesia. Five hundred specimens from French Polynesia belonging to three species, Aedes aegypti, Aedes polynesiensis, and Culex quinquefasciatus, were included in the study. Testing the legs of these mosquitoes by MALDI-TOF MS revealed a 100% correct identification of all specimens at the species level. The MALDI-TOF MS profiles obtained allowed differentiation of male from female mosquitoes and the specific identification of female mosquito colonies of the same species but different geographic origin.

Quantitation using mass spectrometry (MS) is a routine approach for multiple analytes, including small molecules and peptides. Electrospray-based MS platforms are typically employed, as they provide highly reproducible outputs for batch processing of multiple samples. Quantitation using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (ToF) mass spectrometry, while less commonly adopted, offers the ability to monitor analytes at significantly higher throughput and lower cost compared with ESI MS. Achieving accurate quantitation using this approach requires the development of appropriate sample preparation, spiking of appropriate internal standards, and acquisition to minimize spot-to-spot variability. Here we describe the preparation of samples for accurate quantitation using MALDI-ToF MS. The methodology presented shows the ability to quantitate perfluorooctanesulfonic acid (PFOS) from contaminated water.

The reliable identification of blood, as well as the determination of its origin (human or animal) is of great importance in a forensic investigation. Whilst presumptive tests are rapid and deployed in situ, their very nature requires confirmatory tests to be performed remotely. However, only serological tests can determine blood provenance. The present study improves on a previously devised Matrix Assisted Laser Desorption Ionisation Mass Spectrometry (MALDI MS)-proteomics based method for the reliable detection of blood by enabling the determination of blood provenance. The overall protocol was developed to be more specific than presumptive tests and faster/easier than the gold standard liquid chromatography (LC) MS/MS analysis. This is considered a pre-validation study that has investigated stains and fingermarks made in blood, other biofluids and substances that can elicit a false-positive response to colorimetric or presumptive tests, in a blind fashion. Stains and marks were either untreated or enhanced with a range of presumptive tests. Human and animal blood were correctly discriminated from other biofluids and non-biofluid related matrices; animal species determination was also possible within the system investigated. The procedure is compatible with the prior application of presumptive tests. The refined strategy resulting from iterative improvements through a trial and error study of 56 samples was applied to a final set of 13 blind samples. This final study yielded 12/13 correct identifications with the 13th sample being correctly identified as animal blood but with no species attribution. This body of work will contribute towards the validation of MALDI MS based methods and deployment in violent crimes involving bloodshed.

Glycosylation is a fundamental cellular process that has a dramatic impact on the functionality of glycoconjugates such as proteins or lipids and mediates many different biological interactions including cell migration, cellular signaling, and synaptic interactions in the nervous system. In spinal cord injury (SCI), all of these cellular processes are altered, but the potential contributions of glycosylation changes to these alterations has not been thoroughly investigated. We studied the glycosylation of injured spinal cord tissue from rats that received a contusion SCI. The N- and O-linked glycosylation was assessed at 3 and 14 days post-injury (DPI), and compared with uninjured control and time-matched sham spinal tissue. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) and tandem MS (MS/MS) were performed to analyze carbohydrate structures. Results revealed diverse and abundant glycosylation in all groups, with some carbohydrate structures differentially produced in SCI animals compared with uninjured controls and shams. One such change occurred in the abundance of the Sda structure, Neu5Ac-α-(2,3)-[GalNAc-β-(1,4)-]Gal-β-(1,4)-GlcNAc, which was increased in SCI samples compared with shams and non-injured controls. Immunohistochemistry (IHC) and western blot were performed on SCI and sham samples using the CT1 antibody, which recognizes the terminal trisaccharide of Sda with high specificity. Both of these metrics confirmed elevated Sda structure in SCI tissue, where IHC further showed that Sda is expressed mainly by microglia. The results of these studies suggest that SCI causes a significant alteration in N- and O-linked glycosylation.

Mass spectrometry (MS), particularly targeted proteomics, is increasingly being used for quantifying specific proteins and peptides in clinical specimens. The coupling of immuno-enrichment of proteotypic peptides with MS [e.g., immuno-multiple reaction monitoring (MRM) and immuno-matrix-assisted laser desorption ionization (MALDI)] enables the development of highly sensitive and specific assays for low-abundance signaling proteins. By incorporating stable isotope-labeled standards, these workflows allow the determination of endogenous protein concentrations. This is typically achieved through external calibration, often using surrogate matrices, which has inherent limitations for the analysis of clinical specimens as there are often substantial variations in the sample matrix, and sample amounts are typically limited. We have previously introduced the use of two peptide isotopologues for generating external calibration curves in plasma. Here, we present a two-point internal calibration (2-PIC) strategy using two isotopologues for immuno-MS assays and demonstrate its flexibility and robustness. Quantification of the tumor suppressor PTEN in Colo-205 cells by immuno-MRM and immuno-MALDI using 2-PIC and external calibration yielded very similar results (relative standard deviation between 2-PIC and external calibration: 4.9% for immuno-MRM; 1.1% for immuno-MALDI), without the need for a surrogate matrix or additional patient material for calibration, while concurrently reducing the instrument time and cost. Although our PTEN immuno-MRM and immuno-MALDI assays can be considered to be orthogonal as they utilized entirely different sample preparation and MS analysis workflows, targeted different PTEN peptides, and were performed in different laboratories, the endogenous Colo-205 PTEN levels determined with 2-PIC showed a good correlation ( r 2 = 0.9966) and good agreement (0.48 ± 0.01 and 0.29 ± 0.02 fmol/μg of total protein) between immuno-MRM and immuno-MALDI.

This study introduced sandwich-structured copper-glass substrates for standardization of laser desorption and plasma ionization. For standardized quantitative analysis, cavities were constructed which allow better reproducibility in droplet deposition and for laser application. Applying the diode laser, molten substrate material is incorporated into the glass, being trapped inside. Therefore, this method can be separated from laser ablation, achieving high ion signals without ablating material from the surface. Flexible microtube plasma (FμTP) was selected as the ionization source, this being the first time that laser desorption and FμTP ionization are coupled. This laser-plasma interface was applied to the detection of cholesterol, which showed a significantly improved limit of detection of 0.46 ng and linear dynamic range of 3 orders of magnitude in positive ion mode compared to other (ambient air mass spectrometry) methods. The main reason was the change of phase on the copper surface. The dehydrated molecule [M-H 2 O+H] + was the base peak of the spectrum and no further dissociation or fragmentation was observed. Blood plasma was spiked with cholesterol. In a 1:100 chloroform dilution, the presence of the plasma was neglectable and led to the same detection limits and linear dynamic range as in the cholesterol standard. No sample preparation or internal standards were needed for calibration. The physical effects of the surface modification were investigated, including the calculation of the laser beam waist to simplify the comparison and reproducibility of results.

Withanolides from six parts (flower, leaf, stem, root, seed, and peel) of Datura metel L. ( D metel L.) obtained from ten production areas in China were identified and quantified by UPLC-MS/MS. A total of 85 withanolides were characterized for the first time using the UPLC-Q-TOF-MS/MS system. Additionally, a simultaneous, rapid and accurate measurement method was developed for the determination of 22 bioactive withanolides from ten production areas with the UPLC-Q-TRAP-MS/MS system. The results show the total withanolide content is highest in the leaves (155640.0 ng/g) and lowest in the roots (14839.8 ng/g). Compared with other production areas, the total content of plants from Dujiangyan was the highest at 82013.9 ng/g (value range of ten areas: 82013.9-42278.5 ng/g). The results also show significant differences in the distribution of withanolides in the different plant parts, as well as across different production areas. This is a breakthrough report providing a simultaneous qualitative and quantitative analysis of 22 withanolides in D. metel L. It could be the basis for the more rational use of various parts of D. metel L., and the expansion of medicinal resources. This work also lays a solid foundation for research on the quality control of D. metel L.

We report on a sensitive and fast quantitative MALDI-MS/MS method used to assess saffron authenticity by direct analysis through the determination of picrocrocin as the saffron authenticity marker, and using curcumin as the non-isotopic isobaric internal standard. The internal standard curcumin yielded good linearity (R 2  = 0.994), and with confidence intervals at 95% for intercept. The detectable maximum adulteration percentage (99.0%) was estimated interpolating the limit of detection (LOD) for the isobaric internal standard in linear regression. The LOD was 47.63 ppm, and LOQ was 56.53 ppm. Good accuracy and precision were obtained for all concentrations. The capability of the MS approach to monitor analytes in a specific, selective fashion was used to obtain a semi-quantitative adulteration percentage and to establish the adulterant by additional experiments. The detection of gardecin and its derivatives in commercial samples indicated that Gardenia jasminoides Ellis was used as the adulterant., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

In this two-part review we present an up-to-date description of different imaging methods available to map the localization of drugs on skin as a complement of established ex-vivo absorption studies. This first part deals with invasive methods which are grouped in two classes according to their underlying principles: i) methods using radioactivity such as autoradiography and ii) mass spectrometry methods such as MALDI and SIMS. For each method, a description of the principle is given along with example applications of imaging and quantifying drug delivery in human skin. Thanks to these techniques a better assessment of the fate of drugs is obtained: its localization on a particular skin structure, its potential accumulation, etc. A critical comparison in terms of capabilities, sensitivity and practical applicability is included that will help the reader to select the most appropriate technique depending on the particular problem to be solved., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The strength of MALDI-MSI is to analyze and visualize spatial intensities of molecular features from an intact tissue. The distribution of the intensities can then be visualized within a single tissue section or compared in between sections, acquired consecutively. This method can be reliably used to reveal physiological structures and has the potential to identify molecular details, which correlate with biological outcomes. MALDI-MSI implementation in clinical laboratories requires the ability to ensure method quality and validation to meet diagnostic expectations. To be able to get consistent qualitative and quantitative results, standardized sample preparation and data acquisition are of highest priority. We have previously shown that the deposition of internal standards onto the tissue section during sample preparation can be used to improve the mass accuracy of monitored m / z features across the sample. Here, we present the use of external and internal controls for the quality check of sample preparation and data acquisition, which is particularly relevant when either many spectra are acquired during a single MALDI-MSI experiment or data from independent experiments are processed together. To monitor detector performance and sample preparation, we use egg white as an external control for peptide and N- glycan MALDI-MSI throughout the experiment. We have also identified endogenous peptides from cytoskeletal proteins, which can be reliably monitored in gynecological tissue samples. Lastly, we summarize our standard quality control workflow designed to produce reliable and comparable MALDI-MSI data from single sections and tissue microarrays (TMAs).

Background: Glycated hemoglobin (Hemoglobin A 1c , HbA 1c ) plays a key role in monitoring long-term blood glucose levels in diabetics mellitus. Therefore, it is of great importance to ensure test quality of HbA 1c methods., Objectives: We aimed to evaluate analytical performances of a matrix assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) system for the measurement of HbA 1c ., Methods: We assessed the analytical performances of the method including imprecision, accuracy, and linearity. In addition, comparison with Variant II Turbo 2.0 and Capillarys3 TERA, correlation between glycation rate of α and β globin as well as the influence of most frequent analytical interferences in HbA 1c assays were also investigated., Results: As measurement of imprecision, within-run CVs and total CVs were lower than 1.6% and 2.4%, respectively. Discrepancy of test results (<0.2%) of IFCC value-assigned external quality control samples indicated a good accuracy of the method. The linearity was excellent with a correlation coefficient of 0.999. The QuanTOF results were well correlated with those obtained by Variant II Turbo 2.0 and Capillarys3 TERA. Good correlation between glycation rates of α and β globin were found. QuanTOF was not prone to common interferences including bilirubin, triglyceride, labile A 1c , and carbamylated hemoglobin. However, unacceptable positive bias was observed when the amount of HbF were greater than approximately 8.0% or in the presence of HbS., Conclusions: QuanTOF perform well for the determination of HbA 1c and meet quality criteria requested for clinical use., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The application of proteomic liquid chromatography mass spectrometry (LC-MS) for identifying proteins and peptides associated with human disease is rapidly growing in clinical diagnostics. However, the ability to accurately and consistently detect disease-associated peptides remains clinically uncertain. Variability in diagnostic testing occurs in part due to the absence of appropriate reference testing materials and standardised clinical guidelines for proteomic testing. In addition, multiple proteomic testing pipelines have not been fully assessed through external quality assurance (EQA). This trial was therefore devised to evaluate the performance of a small number of mass spectrometry (MS) testing facilities to (i) evaluate the EQA material for potential usage in a proteomic quality assurance program, and to (ii) identify key problem areas associated with human peptide testing. Five laboratories were sent six peptide reference testing samples formulated to contain a total of 35 peptides in differing ratios of light (natural) to heavy (labelled) peptides. Proficiency assessment of laboratory data used a modified approach to similarity and dissimilarity testing that was based on Bray-Curtis and Sorensen indices. Proficiency EQA concordant consensus values could not be derived from the assessed data since none of the laboratories correctly identified all reference testing peptides in all samples. However, the produced data may be reflective of specific inter-laboratory differences for detecting multiple peptides since no two testing pipelines used were the same for any laboratory. In addition, laboratory feedback indicated that peptide filtering of the reference material was a common key problem area prior to analysis. These data highlight the importance of an EQA programme for identifying underlying testing issues so that improvements can be made and confidence for clinical diagnostic analysis can be attained.

Introduction: Non-targeted metabolic profiling using high-resolution mass spectrometry (HRMS) is a standard approach for pathway identification despite technical limitations., Objectives: To assess the performance of combining targeted quadrupole (QQQ) analysis with HRMS for in-depth pathway profiling., Methods: Serum of exercising patients with type 1 diabetes (T1D) was profiled using targeted and non-targeted assays., Results: Non-targeted analysis yielded a broad unbiased metabolic profile, targeted analysis increased coverage of purine metabolism (twofold) and TCA cycle (three metabolites)., Conclusion: Our screening strategy combined the benefits of the unbiased full-scan HRMS acquisition with the deeper insight into specific pathways by large-scale QQQ analysis.

Echinocandins are the recommended first-line antifungals for treatment of invasive candidiasis. The increasing number of Candida glabrata strains resistant against echinocandins is an emerging health care concern. The rapid detection of resistant C. glabrata isolates is an urgent requirement for clinical laboratories. In this study, we developed the MALDI Biotyper antibiotic (antifungal) susceptibility test rapid assay (MBT ASTRA) for the rapid detection of anidulafungin-resistant C. glabrata isolates directly from positive blood cultures. Of 100  C. glabrata strains, MBT ASTRA classified 69 as susceptible and 29 as resistant. Microdilution assays performed according to the Clinical and Laboratory Standards Institute (CLSI) guidelines, used as a standard reference, identified 65 susceptible, 9 intermediate, and 26 resistant isolates. Sequencing of hot spot 1 and hot spot 2 regions of the FKS1 and FKS2 genes classified 86 susceptible and 14 resistant isolates. The MBT ASTRA had sensitivity and specificity of 80% and 95%, respectively, compared to the microdilution method. Positive and negative agreement of MBT ASTRA was calculated at 100% and 80%, respectively, compared with the molecular sequencing approach. Together, these results revealed a high accuracy of MBT ASTRA compared to microdilution according to the CLSI and PCR analysis, resulting in a categorical agreement of 90% and 83%, respectively. The validity of MBT ASTRA was 98%. Importantly, MBT ASTRA provided antifungal susceptibility testing (AFST) within 6 h that was both accurate and reliable compared to the other two approaches, which require at least 24 h or are costly. Therefore, this method has the potential to facilitate clinical AFST rapidly at low sample costs for clinical labs already equipped with matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS)., (Copyright © 2019 American Society for Microbiology.)

Here we present a new analytical method where immunoconcentration of the analyte is coupled to quantitative matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS) analysis allowing in minutes the identification and highly sensitive quantitation of microcystins (MCs) as model targets. The key element is a site-specific in vivo biotinylated nanobody of broad cross-reactivity with microcystins. The single biotin moiety at the C-terminus and the small size of the nanobody (15 kDa) enable its oriented and tightly packed immobilization on magnetic beads, providing a highly efficient capture of the toxin. The binding capacity of the bioadsorbent is partially loaded with an easily synthesized internal standard for MS quantitation. After capture, the beads are directly dispensed on the MALDI-TOF MS target enabling the identification and sensitive quantitation of the microcystin (MC) congeners. Since salts and contaminants are removed during the concentration step, no cleanup or other sample treatments are needed. The method was validated with a large number of water and serum samples with excellent precision and recovery at quantitation limits of 0.025 μg/L of MC.

Filamentous fungi are frequently involved in food spoilage and cause important food losses and substantial economic damage. Their rapid and accurate identification is a key step to better manage food safety and quality. In recent years, MALDI-TOF MS has emerged as a powerful tool to identify microorganisms and has successfully been applied to the identification of filamentous fungi especially in the clinical context. The aim of this study was to implement a spectral database representative of food spoilage molds. To this end, after application of a standardized extraction protocol, 6477 spectra were acquired from 618 fungal strains belonging to 136 species and integrated in the VITEK MS database. The performances of this database were then evaluated by cross-validation and ∼95% of correct identification to the species level was achieved, independently of the cultivation medium and incubation time. The database was also challenged with external isolates belonging to 52 species claimed in the database and 90% were correctly identified to the species level. To our best knowledge, this is the most comprehensive database of food-relevant filamentous fungi developed to date. This study demonstrates that MALDI-TOF MS could be an alternative to conventional techniques for the rapid and reliable identification of spoilage fungi in food and industrial environments., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Purpose: The new third-generation sequencing platform MinION is an attractive maintenance-free and disposable portable tool that can perform long-read and real-time sequencing. In this study, we validated this technology for the identification of pathogens from positive blood culture (BC) bottles., Methodology: A total of 38 positive BC bottles were collected from patients with bloodstream infections, and 18 isolates of Gram-negative (GN) bacteria and 20 isolates of Gram-positive (GP) bacteria were identified from these using 16S rRNA sequencing and then used in this study. DNA was extracted from each aliquot using an extraction protocol that combined glass bead beating and chemical lysis. Up to 200 ng of each purified DNA sample was processed for library preparation and whole-genome sequencing was performed on up to 12 samples through a single MinION flow cell., Results: All GN bacteria identifications made by MinION sequencing for 30 min using the What's In My Pot? (WIMP) workflow via EPI2ME on the basis of the most frequent classified reads were consistent with those made by 16S rRNA sequencing. On the other hand, for GP bacteria specimens, the identification results for 16S rRNA sequencing and MinION were only in agreement in 12 out of 20 (60.0 %) cases. ARMA analysis was able to detect extended-spectrum β-lactamase (ESBL)-associated genes among various antimicrobial resistance-related genes., Conclusion: We demonstrated the potential of the MinION sequencer for the identification of GN bacteria from positive BC bottles and the confirmation of an ESBL phenotype. This innovative sequence technology and its application could lead to a breakthrough in the diagnosis of infectious diseases.

Nonsteroidal anti-inflammatory drugs (NSAIDs) are widely used for symptomatic relief from fever, inflammation, and chronic pain associated with a variety of human disorders. Long-term usage of these drugs can result in severe syndromes; hence, their dose should be controlled carefully and their side effects such as Stevens-Johnson syndrome, toxic epidermal necrolysis, phototoxicity, acute interstitial nephritis, gastrointestinal bleeding, cardiovascular diseases, and liver injury should be considered. Furthermore, the widely used combination of NSAIDs as over-the-counter (OTC) drugs with other drugs leads to adverse drug-drug interactions. Therefore, development of a throughput method to rapidly screen 20 NSAIDs in biological samples is necessary to safeguard human health. In this work, we selected a suitable fluorophore probe coupled with in situ micro-labeling (<2 min) on stainless plate for the fast detection of NSAIDs in plasma samples at the micro-liter level (5 μL) without complicated sample preparation and separation. Every step undertaken in the protocol was also at the micro-liter level; thus, a small amount of blood collected from the human finger will suffice to determine the drug concentration in blood using the proposed method. Furthermore, the proposed method we developed was also matched the modern trends of green analytical chemistry towards miniaturization of analytical methodologies.

The objective was to compare standard versus on-plate sample preparation protocols for identification of mastitis bacteria by MALDI-TOF MS. A total of 186 bacterial isolates from cows with subclinical mastitis were identified by MALDI-TOF MS after preparation using two extraction protocols. On-plate protocol was performed by applying the bacterial colony directly from the culture plate onto the plate spot. For the standard protocol, lysis of bacterial colonies using reagents was performed in a cryotube, and the resulting extract was applied onto the plate spot for analysis. The on-plate protocol showed a similar bacteria identification rate (91.4%, n = 170/186) in comparison to the standard (94.6%, n = 176/186). Identification was higher for both protocols when scores used for species-level identification (≥ 2.0) was reduced to genus-level (≥ 1.7); genus-level identification score rate increased from 94.6 to 100% when using the standard protocol, and from 91.4 to 94.6% when using the on-plate protocol. However, when compared standard (as gold standard) versus on-plate protocol, genus-level identification score rate ranged from 87.1 to 89.8%. Therefore, when the on-plate protocol fails to identify any specie, the standard extraction may be more suitable as a reference protocol for use. Strategy for increasing identification with the on-plate protocol may include upgrading the reference database library. Choice of protocol for preparation may be influenced by the bacterial type to be identified. Standard and on-plate extraction protocols of bacterial ribosomal proteins associated with MALDI-TOF MS might be alternatives to conventional microbiology methods for identification of subclinical mastitis pathogens.

Introduction: Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a powerful new tool to identify human fungal pathogens and has radically altered the diagnostic mycology workflow at many medical centers around the world. Areas covered: While most experience is with the identification of yeasts, including species of Candida and Cryptococcus, there is ongoing work investigating the role of MALDI-TOF MS to detect molds, including species of Aspergillus, Fusarium, Scedosporium, and Mucormyctes as well as thermally dimorphic fungi. Expert commentary: In this paper, we review the current knowledge about this important new platform and examine how its expanding use may impact molecular diagnostics and patient care in the years ahead.

The increasing prevalence of extensively drug-resistant (XDR) Pseudomonas aeruginosa infections is due to the global spread of defined high-risk clones (HRC). Among them, ST175 is particularly frequent in Spain and France. Here, we evaluated O-antigen serotyping and MALDI-TOF as typing methods for the early identification of ST175. O-antigen (O4) serotyping and MALDI-TOF biomarker peak-based recognition models were tested in several strain collections, including 206 non-duplicated P. aeruginosa clinical isolates collected in 2016. Resistance profiles were determined by broth microdilution and clonal epidemiology by pulsed-field gel electrophoresis (PFGE) and multilocus sequence typing (MLST). Up to 24.3% of the isolates were XDR and 28.2% non-susceptible to meropenem, while resistance to ceftolozane/tazobactam (2.9%) and colistin (0.5%) was infrequent. Half of all XDR isolates belonged to ST175 and most of them were only susceptible to ceftolozane/tazobactam and colistin. A model based on the detection of one MALDI-TOF biomarker peak yielded negative and positive predicted values (NPV/PPV) for the detection of ST175 of 100%/51.9%, whereas NPV/PPV for a model based on two biomarker peaks were 99.4%/87.1% and for O4 serotyping, 99.4%/84.1%. Both, O4 serotyping and MALDI-TOF biomarker peak analysis, proved to be sensitive and specific methods that could be easily incorporated in the routine workflow for the early detection of ST175 HCR. Since ST175 is associated with defined XDR profiles, with most isolates only being susceptible to colistin and ceftolozane/tazobactam, these simple techniques could be useful for optimizing semi-empiric antipseudomonal treatments in areas where this HRC is prevalent.

Objective: Group B Streptococcus (GBS) is a leading cause of neonatal meningitis and sepsis worldwide. Intrapartum antibiotics given to women carrying GBS are an effective means of reducing disease in the first week of life. Rapid and reliable tests are needed to accurately identify GBS from these women for timely intrapartum antibiotic administration to prevent neonatal disease. Many laboratories now use matrix-assisted laser desorption ionisation time-of-flight mass spectrometry (MALDI-TOF MS) by direct plating or cell lysis for the identification of GBS isolates. The cell lysis step increases time to results for clinical samples and is more complex to perform. Therefore, we seek to evaluate the sensitivity and specificity of the quicker and more rapid direct plating method in identifying GBS., Results: We directly compared swab isolates analysed by both direct plating and cell lysis method and demonstrated that direct plating has a sensitivity and specificity of 0.97 and 1, respectively, compared to an additional cell lysis step. We demonstrated that MALDI-TOF MS can be successfully used for batch processing by the direct plating method which saves time. These results are reassuring for laboratories worldwide who seek to identify GBS from swabs samples as quickly as possible.

Metabolic fingerprinting is a powerful analytical technique, giving access to high-throughput identification and relative quantification of multiple metabolites. Because of short analysis times, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) is the preferred instrumental platform for fingerprinting, although its power in analysis of free fatty acids (FFAs) is limited. However, these metabolites are the biomarkers of human pathologies and indicators of food quality. Hence, a high-throughput method for their fingerprinting is required. Therefore, here we propose a MALDI-TOF-MS method for identification and relative quantification of FFAs in biological samples of different origins. Our approach relies on formation of monomolecular Langmuir films (LFs) at the interphase of aqueous barium acetate solution, supplemented with low amounts of 2,5-dihydroxybenzoic acid, and hexane extracts of biological samples. This resulted in detection limits of 10 -13 -10 -14 mol and overall method linear dynamic range of at least 4 orders of magnitude with accuracy and precision within 2 and 17%, respectively. The method precision was verified with eight sample series of different taxonomies, which indicates a universal applicability of our approach. Thereby, 31 and 22 FFA signals were annotated by exact mass and identified by tandem MS, respectively. Among 20 FFAs identified in Fucus algae, 14 could be confirmed by gas chromatography-mass spectrometry.

Cryptococcus neoformans and Cryptococcus gattii are the main pathogenic species of invasive cryptococcosis among the Cryptococcus species. Taxonomic studies have shown that these two taxa have different genotypes or molecular types with biological and ecoepidemiological peculiarities. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has been proposed as an alternative method for labor-intensive methods for C. neoformans and C. gattii genotype differentiation. However, Vitek MS, one of the commercial MALDI-TOF MS instruments, has not been yet been evaluated for this purpose. Thus, we constructed an in-house database with reference strains belonging to the different C. neoformans (VNI, VNII, VNIII, and VNIV) and C. gattii (VGI, VGII, VGIII, and VGIV) major molecular types by using the software Saramis Premium (bioMérieux, Marcy-l'Etoile, France). Then, this new database was evaluated for discrimination of the different genotypes. Our in-house database provided correct identification for all C. neoformans and C. gattii genotypes; however, due to the intergenotypic mass spectral similarities, a careful postanalytic evaluation is necessary to provide correct genotype identification., (Copyright © 2019 American Society for Microbiology.)

Objectives: We evaluated the performance and time to result for pathogen identification (ID) and antimicrobial susceptibility testing (AST) of the Accelerate Pheno™ system (AXDX) compared with standard of care (SOC) methods. We also assessed the hypothetical improvement in antibiotic utilization if AXDX had been implemented., Methods: Clinical samples from patients with monomicrobial Gram-negative bacteraemia were tested and compared between AXDX and the SOC methods of the VERIGENE® and Bruker MALDI Biotyper® systems for ID and the VITEK® 2 system for AST. Additionally, charts were reviewed to calculate theoretical times to antibiotic de-escalation, escalation and active and optimal therapy., Results: ID mean time was 21 h for MALDI-TOF MS, 4.4 h for VERIGENE® and 3.7 h for AXDX. AST mean time was 35 h for VITEK® 2 and 9.0 h for AXDX. For ID, positive percentage agreement was 95.9% and negative percentage agreement was 99.9%. For AST, essential agreement was 94.5% and categorical agreement was 93.5%. If AXDX results had been available to inform patient care, 25% of patients could have been put on active therapy sooner, while 78% of patients who had therapy optimized during hospitalization could have had therapy optimized sooner. Additionally, AXDX could have reduced time to de-escalation (16 versus 31 h) and escalation (19 versus 31 h) compared with SOC., Conclusions: By providing fast and reliable ID and AST results, AXDX has the potential to improve antimicrobial utilization and enhance antimicrobial stewardship.

Background: The circulating level of the peptide hormone insulin-like factor 3 (INSL3) is a promising diagnostic marker reflecting Leydig cell function in the male. Few commercial immunoassays of varying quality exist. Therefore, we decided to develop and validate a precise method for quantification of INSL3 by mass spectrometry., Methods: We developed an assay in which the INSL3 A-chain is released from the INSL3 A-B heterodimer by chemical reduction and alkylation. The alkylated INSL3 A-chain is quantitated by liquid chromatography-tandem mass spectrometry (LC-MS/MS), as substitute for serum INSL3. The method was compared to a validated and sensitive in-house serum INSL3 immunoassay using 97 serum samples from 12 healthy boys during pubertal transition. Adult levels were determined based on sera from 72 adult healthy males aged 18-40 years., Results: An LC-MS/MS assay with limit of detection and limit of quantification (LOQ) of 0.06 and 0.15 ng/mL, respectively, and intra-assay CVs <9% in the relevant ranges was obtained. The LC-MS/MS compared well with the in-house immunoassay (Deming regression slope: 1.28; Pearson correlation: R=0.86). INSL3 concentrations increased with pubertal maturation in healthy boys. INSL3 concentrations were above the LOQ in all samples from the adult men. The mean (±2 SD range)for serum INSL3 concentrations in the adult men was 2.2 (0.5-3.9) ng/mL., Conclusions: We have developed a robust and sensitive method suitable for quantitation of serum INSL3 in a clinical setting using LC-MS/MS instrumentation available in modern clinical laboratories. The method paves the way for future studies into the clinical role of serum INSL3 measurements.

Pasteurella multocida is notorious for its role as an opportunistic pathogen in infectious bronchopneumonia, the economically most important disease facing cattle industry and leading indication for antimicrobial therapy. To rationalize antimicrobial use, avoiding imprudent use of highly and critically important antimicrobials for human medicine, availability of a rapid antimicrobial susceptibility test is crucial. The objective of the present study was to design a MALDI Biotyper antibiotic susceptibility test rapid assay (MBT-ASTRA) procedure for tetracycline resistance detection in P. multocida. This procedure was validated on 100 clinical isolates with MIC-gradient strip test, and a comparison with disk diffusion was made. Sensitivity and specificity of the MBT-ASTRA procedure were 95.7% (95% confidence interval (CI) = 89.8-101.5) and 100% (95% CI = 100-100), respectively, classifying 98% of the isolates correctly after only three hours of incubation. Sensitivity and specificity of disk diffusion were 93.5% (95% CI = 86.3-100.6) and 96.3% (95% CI = 91.3-101.3) respectively, classifying 95% of the isolates correctly. In conclusion, this MBT-ASTRA procedure has all the potential to fulfil the need for a rapid and highly accurate tetracycline susceptibility testing in P. multocida to rationalize antimicrobial use in outbreaks of bronchopneumonia in cattle or other clinical presentations across species.

Rationale: Explorative statistical analysis of mass spectrometry data is still a time-consuming step. We analyzed critical factors for application of principal component analysis (PCA) in mass spectrometry and focused on two whole spectrum based normalization techniques and their application in the analysis of registered peak data and, in comparison, in full spectrum data analysis. We used this technique to identify different metabolic patterns in the bacterial culture of Cronobacter sakazakii, an important foodborne pathogen., Methods: Two software utilities, the ms-alone, a python-based utility for mass spectrometry data preprocessing and peak extraction, and the multiMS-toolbox, an R software tool for advanced peak registration and detailed explorative statistical analysis, were implemented. The bacterial culture of Cronobacter sakazakii was cultivated on Enterobacter sakazakii Isolation Agar, Blood Agar Base and Tryptone Soya Agar for 24 h and 48 h and applied by the smear method on an Autoflex speed MALDI-TOF mass spectrometer., Results: For three tested cultivation media only two different metabolic patterns of Cronobacter sakazakii were identified using PCA applied on data normalized by two different normalization techniques. Results from matched peak data and subsequent detailed full spectrum analysis identified only two different metabolic patterns - a cultivation on Enterobacter sakazakii Isolation Agar showed significant differences to the cultivation on the other two tested media. The metabolic patterns for all tested cultivation media also proved the dependence on cultivation time., Conclusions: Both whole spectrum based normalization techniques together with the full spectrum PCA allow identification of important discriminative factors in experiments with several variable condition factors avoiding any problems with improper identification of peaks or emphasis on bellow threshold peak data. The amounts of processed data remain still manageable. Both implemented software utilities are available free of charge from http://uprt.vscht.cz/ms., (Copyright © 2018 John Wiley & Sons, Ltd.)

Objective: Staphylococcus aureus is a commonly reported cause of buffalo mastitis. However, its prevalence may be overestimated. The aim of this study was to compare S. aureus identification by conventional phenotypic and genotypic assays versus Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS) and novel real-time quantitative PCR tests for the cytochrome oxidase subunit D II (cydB) and staphylocoagulase (coa) genes., Results: From 408 samples obtained from buffalo milk/milking environment, 32 putative S. aureus strains were identified based on characteristic growth on Baird Parker agar, positive catalase reaction, ability to clot rabbit plasma, and positive Sa442 PCR assay. However, in further testing, only 10 of these strains were positive in latex agglutination tests and by MALDI-TOF MS, only eight of the 32 strains were S. aureus while the rest were S. chromogenes (19), S. agnetis (3), S. cohnii (1), or S. xylosus (1). All eight strains identified as S. aureus by MALDI-TOF analysis and confirmed by 16S RNA gene sequencing were positive in a S. aureus-specific cydB PCR test. As well, 7/8 S. aureus strains were PCR positive in a real-time coa PCR test as were 2/69 S. chromogenes and the lone S. xylosus strain tested.

Metal phthalocyanines are promising components in photodynamic therapy. Aluminum phthalocyanine chloride (AlClPc) has been used to treat oral cancer in mice, human carious tissue, lung cancer cells and other conditions. To overcome the high hydrophobicity of AlClPc, phthalocyanine is often encapsulated in nanoformulations. Despite increased usage, little is known about the pharmacokinetics and biodistribution of AlClPc. The aim of this study was the development and validation of a UHPLC-MS method for the determination of AlClPc in solution after extraction from nanoformulations and biological matrices such as plasma and tissue. The described method has been assayed as to selectivity, linearity, limits of detection and quantification, precision and recovery. The present study is the first to describe the behavior of AlClPc in biological matrices with mass spectrometry as well as the first to describe the chromatographic behavior of AlClPc contaminants. Molecular mass analysis identified dechlorination of AlClPc by both LC/MS and MALDI-MS and an adduct formation in LC/MS. The parameters observed indicated that the method has applicability and robustness for use in biodistribution studies., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Quantitative mass spectrometry imaging (MSI) is a robust approach that provides both quantitative and spatial information for drug candidates' research. However, because of complicated signal suppression and interference, acquiring accurate quantitative information from MSI data remains a challenge, especially for whole-body tissue sample. Ambient MSI techniques using spray-based ionization appear to be ideal for pharmaceutical quantitative MSI analysis. However, it is more challenging, as it involves almost no sample preparation and is more susceptible to ion suppression/enhancement. Herein, based on our developed air flow-assisted desorption electrospray ionization (AFADESI)-MSI technology, an ambient quantitative MSI method was introduced by integrating inkjet-printing technology with normalization of the signal extinction coefficient (SEC) using the target compound itself. The method utilized a single calibration curve to quantify multiple tissue types. Basic blue 7 and an antitumor drug candidate (S-(+)-deoxytylophorinidine, CAT) were chosen to initially validate the feasibility and reliability of the quantitative MSI method. Rat tissue sections (heart, kidney, and brain) administered with CAT was then analyzed. The quantitative MSI analysis results were cross-validated by LC-MS/MS analysis data of the same tissues. The consistency suggests that the approach is able to fast obtain the quantitative MSI data without introducing interference into the in-situ environment of the tissue sample, and is potential to provide a high-throughput, economical and reliable approach for drug discovery and development., (Copyright © 2017 Elsevier B.V. All rights reserved.)

Legionellae, i.e. Legionella pneumophila, are human bacterial hydrophilic facultative pathogens causing pneumonia (Legionnaires' disease). Free-living amoebae (FLA) can serve as natural hosts and thus as reservoirs of many amoebae-resistant bacteria. An encysted amoeba can contribute to the resistance of intracellular L. pneumophila to various chemical and physical treatments. Humans can be infected by droplets containing bacteria from an environmental source or human-made devices such as shower heads, bathtubs, air-conditioning units or whirlpools. In this study, we were investigating the presence of FLA and L. pneumophila in plumbing systems of healthcare facilities in Bratislava (Slovakia) by standard diagnostic methods, while the presence of L. pneumophila was verified also by MALDI-TOF MS (matrix-assisted laser desorption/ionization time-of-flight mass spectrometry) analysis. The results showed the occurrence of L. pneumophila and FLA in 62.26% and 66.4% of samples taken from four paediatric clinics, respectively. Both standard methods and MALDI-TOF MS showed comparable results and they can be successfully applied for the identification of L. pneumophila strains in environmental samples. Our approach could be useful for further monitoring, prevention and decreasing risk of Legionella infection also in other hospitals., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Food additives generally used in carbonated drinks, such as 4-methylimidazole (4MI), caffeine (Caf?), citric acid (CA), and aspartame (Apm), were measured by matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) using nanometer-sized particles of iron oxide (Fe 2 O 3 NPs). The quantification of 4MI in Coca Cola (C-cola) was carried out. In order to improve the reproducibility of the peak intensities, Fe 2 O 3 NPs loaded on ZSM5 zeolite were used as the matrix for quantification. By using 2-ethylimidazole (2EI) as the internal standard, the amount of 4MI in C-cola was determined to range from 88 to 65 μg/355 mL. The results agree with the published value (approx. 72 μg/355 mL). It was found that MALDI using Fe 2 O 3 was applicable to the quantification of 4MI in C-cola.

The quest for internal standards useful in MALDI imaging studies goes on to get not only lateral distribution but also reliable relative quantitative information. We developed a method based on application of matrix and dual internal standards to allow intra- and intersample normalization of lipids intensities in kidney sections of control and cisplatin-treated Wistar rats. An inkjet printer was used to deposit a custom-prepared ink with DHB as MALDI matrix, a primary lipids-based internal standard, and a spiked lanthanide as a secondary internal standard. We applied different laser energy and varied the amounts of matrix-internal standards mixture to evaluate the normalization potential of the internal standards. Successful correction of intensity artifacts caused by instrumental drifts was possible, but not those resulting from uneven matrix application. ICP-MS absolute quantification of the lanthanide in the printed layer ensured the reproducibility of the matrix and internal standards application with RSD of 10-15%. Internal standard-normalized data allowed intrasample modification of the MALDI image to make it compatible with the optical image. Normalization to internal standards corrected a 2-fold difference in lipids intensity, which allowed a meaningful comparison of tissue lipids in control and cisplatin-treated kidneys. More importantly, normalization of lipid relative abundances based on the same adduct type (H + , Na + , and K + ) for analyte and internal standard corrected for different ionization efficiencies showing a realistic signal level and enabling reliable comparison of different samples on relative quantitative basis.