Search

Abstract: Accurate estimation of the elemental composition of materials that contain both low- and high-Z elements by electron probe X-ray microanalysis is not an easy task. An example of this kind of material is a new family of ceramics with general formula (Na1−x Bix)(Mn y Nb1−y )O3. To solve this problem, a method based on Monte Carlo simulations combined with an iterative approximation, which was recently successfully applied to quantitative analysis of the elemental content in aerosol particles, was used. The quantification procedure was evaluated on Bi2O3, PbO2 and NaNbO3 particles from stoichiometric compounds and applied to check the homogeneity and elemental contents of the selected ceramic after the application of different heat treatments. [Copyright &y& Elsevier]

Daily and seasonal variation in the total elemental, organic carbon (OC) and elemental carbon (EC) content and mass of PM(2.5) were studied at industrial, urban, suburban and agricultural/rural areas. Continuous (optical Dustscan, standard tapered element oscillating micro-balance (TEOM), TEOM with filter dynamics measurement system), semi-continuous (Partisol filter-sampling) and non-continuous (Dekati-impactor sampling and gravimetry) methods of PM(2.5) mass monitoring were critically evaluated. The average elemental fraction accounted for 2-6% of the PM(2.5) mass measured by gravimetry. Metals, like K, Mn, Fe, Cu, Zn and Pb were strongly inter-correlated, also frequently with non-metallic elements (P, S, Cl and/or Br) and EC/OC. A high OC/EC ratio (2-9) was generally observed. The total carbon content of PM(2.5) ranged between 3 and 77% (averages: 12-32%), peaking near industrial/heavy trafficked sites. Principal component analysis identified heavy oil burning, ferrous/non-ferrous industry and vehicular emissions as the main sources of metal pollution., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Special episodes of long-range transported particulate (PM) air pollution were investigated in a one-month field campaign at an urban background site in Helsinki, Finland. A total of nine size-segregated PM samplings of 3- or 4-day duration were made between August 23 and September 23, 2002. During this warm and unusually dry period there were two (labelled P2 and P5) sampling periods when the PM2.5 mass concentration increased remarkably. According to the hourly-measured PM data and backward air mass trajectories, P2 (Aug 23-26) represented a single, 64-h episode of long-range transported aerosol, whereas P5 (Sept 5-9) was a mixture of two 16- and 14-h episodes and usual seasonal air quality. The large chemical data set, based on analyses made by ion chromatography, inductively coupled plasma mass spectrometry, X-ray fluorescence analysis and smoke stain reflectometry, demonstrated that the PM2.5 mass concentrations of biomass signatures (i.e. levoglucosan, oxalate and potassium) and of some other compounds associated with biomass combustion (succinate and malonate) increased remarkably in P2. Crustal elements (Fe, Al, Ca and Si) and unidentified matter, presumably consisting to a large extent of organic material, were also increased in P2. The PM2.5 composition in P5 was different from that in P2, as the inorganic secondary aerosols (NO3-, SO4(2-), NH4+) and many metals reached their highest concentration in this period. The water-soluble fraction of potassium, lead and manganese increased in both P2 and P5. Mass size distributions (0.035-10 microm) showed that a large accumulation mode mainly caused the episodically increased PM2.5 concentrations. An interesting observation was that the episodes had no obvious impact on the Aitken mode. Finally, the strongly increased concentrations of biomass signatures in accumulation mode proved that the episode in P2 was due to long-range transported biomass combustion aerosol.

Electron-probe x-ray micro analysis (EPMA) and particle-induced x-ray emission analysis (PIXE) were performed under grazing-exit conditions. To control the exit angle (take-off angle), a new sample holder having a stepping motor was developed for grazing-exit EPMA. A carefully polished surface of a stainless-steal sample was measured. The surface of stainless steel is normally covered with a thin native oxide layer. The intensity ratio of Cr K(alpha) to Fe K(alpha) increases significantly at the grazing angle, becoming about 5-times larger at 0.2 degrees than at 40 degrees. This result indicates that grazing-exit EPMA is useful for surface analysis. In addition, a new PIXE equipment was developed for grazing-exit x-ray measurements. The sample is fixed and the x-ray detector is moved by applying a linear stage. Preliminary experimental results of grazing-exit PIXE are also shown.