Search

Analyzing stop-and-go waves at the scale of miles and hours of data is an emerging challenge in traffic research. In the past, datasets were of limited scale and could be easily analyzed by hand or with rudimentary methods to identify a very limited set of traffic waves present within the data. This paper introduces an automatic and scalable stop-and-go wave identification method capable of capturing wave generation, propagation, dissipation, as well as bifurcation and merging, which have previously been observed only very rarely. Using a concise and simple critical-speed based definition of a stop-and-go wave, the proposed method identifies all wave boundaries that encompass spatio-temporal points where vehicle speed is below a chosen critical speed. The method is built upon a graph-based representation of the spatio-temporal points associated with stop-and-go waves, specifically wave front (start) points and wave tail (end) points, and approaches the solution as a graph component identification problem. The method is implemented in Python and demonstrated on a large-scale dataset, I-24 MOTION INCEPTION. New insights revealed from this demonstration with emerging phenomena include: (a) we demonstrate that waves do generate, propagate, and dissipate at a scale (miles and hours) and ubiquity never observed before; (b) wave fronts and tails travels at a consistent speed for a critical speed between 10-20 mph, with propagation variation across lanes, where wave speed on the outer lane are less consistent compared to those on the inner lane; (c) wave fronts and tails propagate at different speeds; (d) wave boundaries capture rich and non-trivial wave topologies, highlighting the complexity of waves.

Stop-and-go waves are a fundamental phenomenon in freeway traffic flow, contributing to inefficiencies, crashes, and emissions. Recent advancements in high-fidelity sensor technologies have improved the ability to capture detailed traffic dynamics, yet such systems remain scarce and costly. In contrast, conventional traffic sensors are widely deployed but suffer from relatively coarse-grain data resolution, potentially impeding accurate analysis of stop-and-go waves. This article explores whether generative AI models can enhance the resolution of conventional traffic sensor to approximate the quality of high-fidelity observations. We present a novel approach using a conditional diffusion denoising model, designed to reconstruct fine-grained traffic speed field from radar-based conventional sensors via iterative refinement. We introduce a new dataset, I24-WaveX, comprising 132 hours of data from both low and high-fidelity sensor systems, totaling over 2 million vehicle miles traveled. Our approach leverages this dataset to formulate the traffic measurement enhancement problem as a spatio-temporal super-resolution task. We demonstrate that our model can effectively reproduce the patterns of stop-and-go waves, achieving high accuracy in capturing these critical traffic dynamics. Our results show promising advancements in traffic data enhancement, offering a cost-effective way to leverage existing low spatio-temporal resolution sensor networks for improved traffic analysis and management. We also open-sourced our trained model and code to facilitate further research and applications.

Previous controlled experiments on single-lane ring roads have shown that a single partially autonomous vehicle (AV) can effectively mitigate traffic waves. This naturally prompts the question of how these findings can be generalized to field operational, high-density traffic conditions. To address this question, the Congestion Impacts Reduction via CAV-in-the-loop Lagrangian Energy Smoothing (CIRCLES) Consortium conducted MegaVanderTest (MVT), a live traffic control experiment involving 100 vehicles near Nashville, TN, USA. This article is a tutorial for developing analytical and simulation-based tools essential for designing and executing a live traffic control experiment like the MVT. It presents an overview of the proposed roadmap and various procedures used in designing, monitoring, and conducting the MVT, which is the largest mobile traffic control experiment at the time. The design process is aimed at evaluating the impact of the CIRCLES AVs on surrounding traffic. The article discusses the agent-based traffic simulation framework created for this evaluation. A novel methodological framework is introduced to calibrate this microsimulation, aiming to accurately capture traffic dynamics and assess the impact of adding 100 vehicles to existing traffic. The calibration model's effectiveness is verified using data from a six-mile section of Nashville's I-24 highway. The results indicate that the proposed model establishes an effective feedback loop between the optimizer and the simulator, thereby calibrating flow and speed with different spatiotemporal characteristics to minimize the error between simulated and real-world data. Finally, We simulate AVs in multiple scenarios to assess their effect on traffic congestion. This evaluation validates the AV routes, thereby contributing to the execution of a safe and successful live traffic control experiment via AVs.

This work describes the use of on-board vehicle data from cars with advanced driver assistance features as a trip summary, with the goal of helping drivers contextualize their driving habits in terms of sustainability. The approach is similar to recent advancements in fitness tracking apps, which leverage smartwatches and other wearable devices to characterize activities during a workout or as part of daily fitness monitoring. Instead of adding new vehicle sensors, the data used for this work is from on-board driving data, namely, signals decoded from the vehicle's Controller Area Network (CAN) bus. With the deepening research of automatic driving technologies, Autonomous Vehicles (AVs) have gradually entered the consumer field, and more users are benefiting from the convenience and safety assistance provided by driving assistance and autonomous driving. However, various technical obstacles persist due to the complex environment, the non-communication of technologies, and users' trust. We propose indicators for evaluating the key characteristics of each drive, to facilitate drivers' familiarity with advanced driver assistance systems and to allow them to consider how different driving styles affect sustainability metrics. Further extensions will allow users to add feedback as part of the driving summary, laying a data foundation for future controller iterations based on real driving data and the attitude of drivers towards it., Comment: 6 pages, 5 figures, 1 table, 4th IEEE Forum for Innovative Sustainable Transportation Systems (Fists 2024)

In this article, we explore the technical details of the reinforcement learning (RL) algorithms that were deployed in the largest field test of automated vehicles designed to smooth traffic flow in history as of 2023, uncovering the challenges and breakthroughs that come with developing RL controllers for automated vehicles. We delve into the fundamental concepts behind RL algorithms and their application in the context of self-driving cars, discussing the developmental process from simulation to deployment in detail, from designing simulators to reward function shaping. We present the results in both simulation and deployment, discussing the flow-smoothing benefits of the RL controller. From understanding the basics of Markov decision processes to exploring advanced techniques such as deep RL, our article offers a comprehensive overview and deep dive of the theoretical foundations and practical implementations driving this rapidly evolving field. We also showcase real-world case studies and alternative research projects that highlight the impact of RL controllers in revolutionizing autonomous driving. From tackling complex urban environments to dealing with unpredictable traffic scenarios, these intelligent controllers are pushing the boundaries of what automated vehicles can achieve. Furthermore, we examine the safety considerations and hardware-focused technical details surrounding deployment of RL controllers into automated vehicles. As these algorithms learn and evolve through interactions with the environment, ensuring their behavior aligns with safety standards becomes crucial. We explore the methodologies and frameworks being developed to address these challenges, emphasizing the importance of building reliable control systems for automated vehicles.

The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. These "phantom jams" or "stop-and-go waves,"are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment leveraged a heterogeneous fleet of 100 longitudinally-controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this paper. The MegaController is a hierarchical control architecture, which consists of two main layers. The upper layer is called Speed Planner, and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock on-board sensors. The Speed Planner ingests live data feeds provided by third parties, as well as data from our own control vehicles, and uses both to perform the speed assignment. The architecture of the speed planner allows for modular use of standard control techniques, such as optimal control, model predictive control, kernel methods and others, including Deep RL, model predictive control and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers, or only some. Control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars, and electronic selection of ACC set points in others. The proposed architecture allows for the combination of all possible settings proposed above. Most configurations were tested throughout the ramp up to the MegaVandertest.

This paper introduces a novel control framework for Lagrangian variable speed limits in hybrid traffic flow environments utilizing automated vehicles (AVs). The framework was validated using a fleet of 100 connected automated vehicles as part of the largest coordinated open-road test designed to smooth traffic flow. The framework includes two main components: a high-level controller deployed on the server side, named Speed Planner, and low-level controllers called vehicle controllers deployed on the vehicle side. The Speed Planner designs and updates target speeds for the vehicle controllers based on real-time Traffic State Estimation (TSE) [1]. The Speed Planner comprises two modules: a TSE enhancement module and a target speed design module. The TSE enhancement module is designed to minimize the effects of inherent latency in the received traffic information and to improve the spatial and temporal resolution of the input traffic data. The target speed design module generates target speed profiles with the goal of improving traffic flow. The vehicle controllers are designed to track the target speed meanwhile responding to the surrounding situation. The numerical simulation indicates the performance of the proposed method: the bottleneck throughput has increased by 5.01%, and the speed standard deviation has been reduced by a significant 34.36%. We further showcase an operational study with a description of how the controller was implemented on a field-test with 100 AVs and its comprehensive effects on the traffic flow.

This paper introduces a novel approach that seeks a middle ground for traffic control in multi-lane congestion, where prevailing traffic speeds are too fast, and speed recommendations designed to dampen traffic waves are too slow. Advanced controllers that modify the speed of an automated car for wave-dampening, eco-driving, or other goals, typically are designed with forward collision safety in mind. Our approach goes further, by considering how dangerous it can be for a controller to drive so slowly relative to prevailing traffic that it creates a significant issue for safety and comfort. This paper explores open-road scenarios where large gaps between prevailing speeds and desired speeds can exist, specifically when infrastructure-based variable speed limit systems are not strictly followed at all times by other drivers. Our designed, implemented, and deployed algorithm is able to follow variable speed limits when others also follow it, avoid collisions with vehicles ahead, and adapt to prevailing traffic when other motorists are traveling well above the posted speeds. The key is to reject unsafe speed recommendations from infrastructure-based traffic smoothing systems, based on real-time local traffic conditions observed by the vehicle under control. This solution is implemented and deployed on two control vehicles in heavy multi-lane highway congestion. The results include analysis from system design, and field tests that validate the system's performance using an existing Variable Speed Limit system as the external source for speed recommendations, and the on-board sensors of a stock Toyota Rav4 for inputs that estimate the prevailing speed of traffic around the vehicle under control., Comment: To Appear, ICCPS 2024

Many decision-making scenarios in modern life benefit from the decision support of artificial intelligence algorithms, which focus on a data-driven philosophy and automated programs or systems. However, crucial decision issues related to security, fairness, and privacy should consider more human knowledge and principles to supervise such AI algorithms to reach more proper solutions and to benefit society more effectively. In this work, we extract knowledge-based logic that defines risky driving formats learned from public transportation accident datasets, which haven't been analyzed in detail to the best of our knowledge. More importantly, this knowledge is critical for recognizing traffic hazards and could supervise and improve AI models in safety-critical systems. Then we use automated verification methods to verify the robustness of such logic. More specifically, we gather 72 accident datasets from Data.gov and organize them by state. Further, we train Decision Tree and XGBoost models on each state's dataset, deriving accident judgment logic. Finally, we deploy robustness verification on these tree-based models under multiple parameter combinations.

We demonstrate a new capability of automated vehicles: mixed autonomy traffic control. With this new capability, automated vehicles can shape the traffic flows composed of other non-automated vehicles, which has the promise to improve safety, efficiency, and energy outcomes in transportation systems at a societal scale. Investigating mixed autonomy mobile traffic control must be done in situ given that the complex dynamics of other drivers and their response to a team of automated vehicles cannot be effectively modeled. This capability has been blocked because there is no existing scalable and affordable platform for experimental control. This paper introduces an extensible open-source hardware and software platform, enabling a team of 100 vehicles to execute several different vehicular control algorithms as a collaborative fleet, composed of three different makes and models, which drove 22752 miles in a combined 1022 hours, over 5 days in Nashville, TN in November 2022.

The dissipation of stop-and-go waves attracted recent attention as a traffic management problem, which can be efficiently addressed by automated driving. As part of the 100 automated vehicles experiment named MegaVanderTest, feedback controls were used to induce strong dissipation via velocity smoothing. More precisely, a single vehicle driving differently in one of the four lanes of I-24 in the Nashville area was able to regularize the velocity profile by reducing oscillations in time and velocity differences among vehicles. Quantitative measures of this effect were possible due to the innovative I-24 MOTION system capable of monitoring the traffic conditions for all vehicles on the roadway. This paper presents the control design, the technological aspects involved in its deployment, and, finally, the results achieved by the experiment., Comment: 21 pages, 1 Table , 9 figures

This work demonstrates a new capability in roadway control: Speed-adaptive, infrastructure-linked connected and automated vehicles. We develop and deploy a lightly modified vehicle that is able to dynamically adjust the vehicle speed in response to posted variable speed limit messages generated by the infrastructure using LTE connectivity. This work describes the open source hardware and software platform that enables integration between infrastructure-based variable posted speed limits, and existing vehicle platforms for automated control. The vehicle is deployed in heavy morning traffic on I-24 in Nashville, TN. The control vehicle follows the posted variable speed limits, resulting in as much as a 25% reduction in speed variability compared to a human-piloted vehicle in the same traffic stream., Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

This work introduces a multi-camera tracking dataset consisting of 234 hours of video data recorded concurrently from 234 overlapping HD cameras covering a 4.2 mile stretch of 8-10 lane interstate highway near Nashville, TN. The video is recorded during a period of high traffic density with 500+ objects typically visible within the scene and typical object longevities of 3-15 minutes. GPS trajectories from 270 vehicle passes through the scene are manually corrected in the video data to provide a set of ground-truth trajectories for recall-oriented tracking metrics, and object detections are provided for each camera in the scene (159 million total before cross-camera fusion). Initial benchmarking of tracking-by-detection algorithms is performed against the GPS trajectories, and a best HOTA of only 9.5% is obtained (best recall 75.9% at IOU 0.1, 47.9 average IDs per ground truth object), indicating the benchmarked trackers do not perform sufficiently well at the long temporal and spatial durations required for traffic scene understanding.

This paper demonstrates the integration model-based design approaches or vehicle control, with validation in a freely available open-source simulator. Continued interest in autonomous vehicles and their deployment is driven by the potential benefits of their use. However, it can be challenging to transition new theoretical approaches into unknown simulation environments. Thus, it is critical for experts from other fields, whose insights may be necessary to continue to advance autonomy, to be able to create control applications with the potential to transition to practice. In this article, we will explain how to use the CAT Vehicle simulator and ROS packages to create and test vehicle controllers. The methodology of developing the control system in this article takes the approach of model-based design using Simulink, and the ROS Toolbox, followed by code generation to create a standalone C++ ROS node. Such ROS nodes can be integrated through roslaunch in the CAT Vehicle ROS package., Comment: 9 pages, technical report, 5 figures

Motivated by earlier work and the developer of a new algorithm, the FollowerStopper, this article uses reachability analysis to verify the safety of the FollowerStopper algorithm, which is a controller designed for dampening stop- and-go traffic waves. With more than 1100 miles of driving data collected by our physical platform, we validate our analysis results by comparing it to human driving behaviors. The FollowerStopper controller has been demonstrated to dampen stop-and-go traffic waves at low speed, but previous analysis on its relative safety has been limited to upper and lower bounds of acceleration. To expand upon previous analysis, reachability analysis is used to investigate the safety at the speeds it was originally tested and also at higher speeds. Two formulations of safety analysis with different criteria are shown: distance-based and time headway-based. The FollowerStopper is considered safe with distance-based criterion. However, simulation results demonstrate that the FollowerStopper is not representative of human drivers - it follows too closely behind vehicles, specifically at a distance human would deem as unsafe. On the other hand, under the time headway-based safety analysis, the FollowerStopper is not considered safe anymore. A modified FollowerStopper is proposed to satisfy time-based safety criterion. Simulation results of the proposed FollowerStopper shows that its response represents human driver behavior better., Comment: 6 pages; 10 figures; ICRA publication

We demonstrate that a supply-chain level compromise of the adaptive cruise control (ACC) capability on equipped vehicles can be used to significantly degrade system level performance of current day mixed-autonomy freeway networks. Via a simple threat model which causes random deceleration attacks (RDAs), compromised vehicles create congestion waves in the traffic that decrease average speed and network throughput. We use a detailed and realistic traffic simulation environment to quantify the impacts of the attack on a model of a real high-volume freeway in the United States. We find that the effect of the attack depends both on the level of underlying traffic congestion, and what percentage of ACC vehicles can be compromised. In moderate congestion regimes the attack can degrade mean commuter speed by over 7%. In high density regimes overall network throughput can be reduced by up to 3%. And, in moderate to high congestion regimes, it can cost commuters on the network over 300 USD/km hr. All of these results motivate that the proposed attack is able to significantly degrade performance of the traffic network. We also develop an anomaly detection technique that uses GPS traces on vehicles to identify malicious/compromised vehicles. We employ this technique on data from the simulation experiments and find that it is unable to identify compromised ACCs compared to benign/normal drivers. That is, these attacks are stealthy to detection. Stronger attacks can be accurately labeled as malicious, motivating that there is a limit to how impactful attacks can be before they are no longer stealthy. Finally, we experimentally execute the attack on a real and commercially available ACC vehicle, demonstrating the possible real world feasibility of an RDA.

This work presents an integrated framework of: vehicle dynamics models, with a particular attention to instabilities and traffic waves; vehicle energy models, with particular attention to accurate energy values for strongly unsteady driving profiles; and sparse Lagrangian controls via automated vehicles, with a focus on controls that can be executed via existing technology such as adaptive cruise control systems. This framework serves as a key building block in developing control strategies for human-in-the-loop traffic flow smoothing on real highways. In this contribution, we outline the fundamental merits of integrating vehicle dynamics and energy modeling into a single framework, and we demonstrate the energy impact of sparse flow smoothing controllers via simulation results.

We find the capacity attained by the Kennedy receiver for coherent-state BPSK when the symbol prior p and pre-detection displacement are optimized. The optimal displacement is different than what minimizes error probability for single-shot BPSK state discrimination., Comment: Updating email address format for this replacement submission

In this article, we assess the string stability of seven 2018 model year adaptive cruise control (ACC) equipped vehicles that are widely available in the US market. Seven distinct vehicle models from two different vehicle makes are analyzed using data collected from more than 1,200 miles of driving in car-following experiments with ACC engaged by the follower vehicle. The resulting dataset is used to identify the parameters of a linear second order delay differential equation model that approximates the behavior of the black box ACC systems. The string stability of the data-fitted model associated with each vehicle is assessed, and the main finding is that all seven vehicle models have string unstable ACC systems. For one commonly available vehicle model that offers ACC as a standard feature on all trim levels, we validate the string stability finding with a multi-vehicle platoon experiment in which all vehicles are the same year, make, and model. In this test, an initial disturbance of 6 mph is amplified to a 25 mph disturbance, at which point the last vehicle in the platoon is observed to disengage the ACC. The data collected in the driving experiments is made available, representing the largest publicly available comparative driving dataset on ACC equipped vehicles.

This paper presents the CAT Vehicle (Cognitive and Autonomous Test Vehicle) Testbed: a research testbed comprised of a distributed simulation-based autonomous vehicle, with straightforward transition to hardware in the loop testing and execution, to support research in autonomous driving technology. The evolution of autonomous driving technology from active safety features and advanced driving assistance systems to full sensor-guided autonomous driving requires testing of every possible scenario. However, researchers who want to demonstrate new results on a physical platform face difficult challenges, if they do not have access to a robotic platform in their own labs. Thus, there is a need for a research testbed where simulation-based results can be rapidly validated through hardware in the loop simulation, in order to test the software on board the physical platform. The CAT Vehicle Testbed offers such a testbed that can mimic dynamics of a real vehicle in simulation and then seamlessly transition to reproduction of use cases with hardware. The simulator utilizes the Robot Operating System (ROS) with a physics-based vehicle model, including simulated sensors and actuators with configurable parameters. The testbed allows multi-vehicle simulation to support vehicle to vehicle interaction. Our testbed also facilitates logging and capturing of the data in the real time that can be played back to examine particular scenarios or use cases, and for regression testing. As part of the demonstration of feasibility, we present a brief description of the CAT Vehicle Challenge, in which student researchers from all over the globe were able to reproduce their simulation results with fewer than 2 days of interfacing with the physical platform., Comment: In Proceedings SCAV 2018, arXiv:1804.03406

Traffic waves are phenomena that emerge when the vehicular density exceeds a critical threshold. Considering the presence of increasingly automated vehicles in the traffic stream, a number of research activities have focused on the influence of automated vehicles on the bulk traffic flow. In the present article, we demonstrate experimentally that intelligent control of an autonomous vehicle is able to dampen stop-and-go waves that can arise even in the absence of geometric or lane changing triggers. Precisely, our experiments on a circular track with more than 20 vehicles show that traffic waves emerge consistently, and that they can be dampened by controlling the velocity of a single vehicle in the flow. We compare metrics for velocity, braking events, and fuel economy across experiments. These experimental findings suggest a paradigm shift in traffic management: flow control will be possible via a few mobile actuators (less than 5%) long before a majority of vehicles have autonomous capabilities.

As complex software and systems development projects need models as an important planning, structuring and development technique, models now face issues resolved for software earlier: models need to be versioned, differences captured, syntactic and semantic correctness checked as early as possible, documented, presented in easily accessible forms, etc. Quality management needs to be established for models as well as their relationship to other models, to code and to requirement documents precisely clarified and tracked. Business and product requirements, product technologies as well as development tools evolve. This also means we need evolutionary technologies both for models within a language and if the language evolves also for an upgrade of the models. This chapter discusses the state of the art in model management and evolution and sketches what is still necessary for models to become as usable and used as software., Comment: 30 pages , 4 figures

This chapter discusses the current state of the art, and emerging research challenges, for metamodelling. In the state-of-the-art review on metamodelling, we review approaches, abstractions, and tools for metamodelling, evaluate them with respect to their expressivity, investigate what role(s) metamodels may play at run-time and how semantics can be assigned to metamodels and the domain specific modeling languages they could define. In the emerging challenges section on metamodelling we highlight research issues regarding the management of complexity, consistency, and evolution of metamodels, and how the semantics of metamodels impacts each of these., Comment: 20 pages, 3 figures