Search

Here we report on the synthesis of two novel very low band gap (VLG) donor-acceptor polymers (Eg ≤ 1 eV) and an oligomer based on the thiadiazoloquinoxaline acceptor. Both polymers demonstrate decent ambipolar mobilities, with P1 showing the best performance of ∼10(-2) cm(2) V(-1) s(-1) for p- and n-type operation. These polymers are among the lowest band gap polymers (≲0.7 eV) reported, with a neutral λmax = 1476 nm (P2), which is the farthest red-shifted λmax reported to date for a soluble processable polymer. Very little has been done to characterize the electrochromic aspects of VLG polymers; interestingly, these polymers actually show a bleaching of their neutral absorptions in the near-infrared region and have an electrochromic contrast up to 30% at a switching speed of 3 s.

Near-infrared (NIR) polymer light-emitting diodes (PLEDs) based on a fluorene-dioctyloxyphenylene wide-gap host material copolymerized with a low-gap emitter are presented. Various loadings (1, 2.5, 10, 20 mol%) of the low-gap emitter are studied, with higher loadings leading to decreased efficiencies likely due to aggregation effects. While the 10 mol% loading resulted in almost pure NIR emission (>99.6%), the 1 mol% loading yielded optimum device performance, which is among the best reported to date for a unblended single-layer pure polymer emitter, with an external quantum efficiencies of 0.04% emitting at 909 nm. The high spectral purity of the PLEDs combined with their performance support the methodology of copolymerization as an effective strategy for developing NIR PLEDs., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Trialkyl phosphites ((RO)3P) can act as co-initiators for the diaryliodonium-induced cationic polymerization of cyclohexene oxide (CHO) or THF. A radical initiation step is also required, consistent with the essential role of a radical chain reaction of the phosphite with the iodonium salt to form polymerization-starting aryltrialkoxyphosphonium salts (ArP(+)(OR)3). We used the visible photolysis of phenylazoisobutyronitrile (PAIBN) as the radical initiation step. The presence of multiple fluorine substituents on the phosphite, as in tris(2,2,2-trifluoroethyl) phosphite (TFP), allows polymerization to proceed with a minimal amount of chain transfer from nucleophilic attack by the phosphite. In a typical experiment, a CHO solution of bis(4-tert-butylphenyl)iodonium hexafluorophosphate (0.05 M), TFP (0.1 M), and PAIBN (0.02 M) was illuminated with a 65-W compact fluorescent bulb for 1 h, resulting in a 78% conversion to poly(cyclohexene oxide) with an average molecular weight (MW) of 25000. We also used competition experiments to determine approximate rate constants for reactions of phenyl radicals with CHO (k = 2 × 10(6) M(-1) s(-1)) and with TFP (k = 2 × 10(8) M(-1) s(-1)).

Combining a strong donor, tris(dodecyloxy)phenyl)-dithieno[3,2-b:2',3'-d]pyrrole, with a strong acceptor, 4,8-dithien-2-yl-2lambda(4)delta(2)-benzo[1,2-c;4,5-c']bis[1,2,5]thiadiazole, has yielded the lowest bandgap, soluble, spray-processable polymer to date. The polymer has access to four different redox states and shows ambipolar behavior in OFETs. Multiple techniques, including transmission/absorption spectroscopy on SWCNTs and reflectance spectroscopy on gold were used to accurately estimate the optical bandgap at 0.5-0.6 eV, which correlates well to theoretical calculations.

An electron donor/acceptor pi-conjugated polymer composed of a bi-EDOT and benzobis(thiadiazole) repeat unit exhibits two reductions with a band gap ranging from approximately 0.5 to 0.8 eV depending on the method of band gap determination.