Search

We investigated a developed arm roll forwarder at Nasu in Tochigi Prefecture, Japan. An arm roll forwarder can only load a steel container that has been fully loaded with logs beforehand, and can later unload such a container. Such a forwarder can shorten the loading and unloading times and improve operational efficiency. We examined two operation systems with an arm roll forwarder and a forwarder. In the first system the loading was done with a grapple-loader. In the second system the loading was done with a processor. The loading times of an arm roll forwarder were significantly less than those of a forwarder. Because the optimal cycle times (excluding the waiting times for an arm roll forwarder) were significantly reduced, the costs of using an arm roll forwarder are lower, although the loading capacity was small and the hourly operation cost was high. The maximum operational efficiencies varied depending on forwarding distances. The second operation system with an arm roll forwarder exhibited the best operational efficiency within a 1,580-m forwarding distance, and beyond that distance it exhibited the highest operational efficiency when a forwarder was used. Similarly, the cost of operation of the system with an arm roll forwarder was the lowest within a 1,130-m forwarding distance, and beyond that distance the cost was the lowest when using the forwarder. Therefore, the arm roll forwarder is effective within a certain forwarding distance. [ABSTRACT FROM AUTHOR]

• Radionuclide migration from activated metallic waste disposed of in DGR. • Role of container and waste surface contamination on radionuclide flux to geosphere. • SS container delays max release of long-lived low mobility radionuclides. • Waste surface contamination is important during initial period of disposal. There are two RBMK-1500 type reactors in Lithuania, which are under decommissioning now. Long-lived low and intermediate level radioactive metallic waste generated during operation and decommissioning of the nuclear power plant is foreseen for deep geological disposal (DGR). A preliminary assessment of the radionuclide release from metallic waste and migration through the engineered barriers of the generic DGR in crystalline rocks is presented in this study. The radionuclide flux to backfill and geosphere is investigated for three different container alternatives: (1) disposal of metallic waste in stainless steel containers, (2) disposal in carbon steel containers and (3) disposal in which the container is not a barrier for radionuclide migration. In addition, the impact of surface contamination of the activated waste on the radionuclide flux is investigated. Comparison of maximum fractional flux to backfill between Alternatives 1 and 2 revealed that the container material plays a noticeable role in the migration of long-lived low mobility radionuclides. The maximum fractional flux to the geosphere for all radionuclides increases from Alternative 1 to Alternative 3. Surface contamination is an important parameter when the maximum radionuclide flux to backfill is observed during the early post-closure period. [ABSTRACT FROM AUTHOR]