Search

Imaged capillary isoelectric focusing (iCIEF) has emerged as an important technique for therapeutic monoclonal antibody (mAb) charge heterogeneity analysis in the biopharmaceutical context, providing imaged detection and quantitation by UV without a mobilization step. Besides quantitation, the characterization of separated charge variants ideally directly by online electrospray ionization-mass spectrometry (ESI-MS) is crucial to ensure product quality, safety, and efficacy. Straightforward direct iCIEF-MS coupling combining high separation efficiency and quantitative results of iCIEF with the characterization power of MS enables deep characterization of mAb charge variants. A short technical setup and optimized methodical parameters (30 nl/min mobilization rate, 2%-4% ampholyte concentration, 0.5-2 mg/ml sample concentration) allow successful mAb charge variant peak assignment from iCIEF to MS. Despite a loss of separation resolution during the transfer, separated intact mAb charge variants, including deamidation as well as major and minor glycoforms even from low abundant charge variants, could be characterized by online ESI-MS with high precision. The presented setup provides a large potential for mAb charge heterogeneity characterization in biopharmaceutical applications.

Methionine is a common excipient used in therapeutic protein liquid formulations as stabilizer and antioxidant. The oxidation of methionine to methionine sulfoxide can be regarded as a sensitive marker of oxidative stress for drug product storage conditions. In this study, a sensitive HPLC method for the quantification of methionine sulfoxide in formulated protein product was developed and qualified according to regulatory requirements using a SIELC® Primesep 100 column with UV detection. The separation involves a mixed-mode mechanism including reversed phase and cationic exchange modalities. The operating range of the method was established between 1 µM and 35 µM of methionine sulfoxide. In this testing range, the method was shown to be linear (R

Size heterogeneity analysis by capillary sieving electrophoresis utilizing sodium dodecyl sulfate (CE(SDS)) with optical detection is a major method applied for release and stability testing of monoclonal antibodies (mAbs) in biopharmaceutical applications. Identification of mAb-fragments and impurities observed with CE(SDS) is of outstanding importance for the assessment of critical quality attributes and development of the analytical control system. Mass spectrometric (MS) detection is a powerful tool for protein identification and characterization. Unfortunately, CE(SDS) is incompatible with online MS-hyphenation due to strong ionization suppression of SDS and other separation buffer components. Here, we present a comprehensive platform for full characterization of individual CE(SDS)-separated peaks by CE(SDS)-capillary zone electrophoresis-top-down-MS. The peak of interest is transferred from the first to the second dimension via an 8-port valve to remove MS-incompatible components. Full characterization of mAb byproducts is performed by intact mass determination and fragmentation by electron transfer dissociation, higher-energy collisional dissociation, and ultraviolet photodissociation. This enables online determination of intact mass as well as sequence verification of individual CE(SDS)-separated peaks simultaneously. A more substantiated characterization of unknown CE(SDS) peaks by exact localization of modifications without prior digestion is facilitated. High sensitivity is demonstrated by successful mass and sequence verification of low abundant, unknown CE(SDS) peaks from two stressed mAb samples. Good fragmentation coverages are obtained by MS2, enabling unequivocal identification of these mAb-fragments. Also, the differentiation of reduced/non-reduced intra-protein disulfide bonds is demonstrated. In summary, a reliable and unambiguous online MS2 identification of unknown compounds of low-abundant individual CE(SDS) peaks is enabled.

Oxidative damage of biopharmaceuticals during manufacturing and storage is a key concern throughout pharmaceutical development. However, few simple and robust analytical methods are available for the determination of oxidation sites. Here, the potential of affinity capillary electrophoresis (ACE) in the separation of proteins with oxidized methionine (Met) residues is shown. Silver(I) and gold(I) ions have the attribute to selectively form complexes with thioethers over sulfoxides. The addition of these ions to the BGE leads to a selective complexation of Met residues and, thus, to a change of charge allowing separation of species according to the different oxidation states of Met. The mechanisms of these interactions are discussed and binding constants for peptides containing Met with silver(I) are calculated. Additionally, the proposed method can be used as an indicator of oxidative stress in large proteins. The presented technique is easily accessible, economical, and has rapid analysis times, adding new approaches to the analytical toolbox of Met sulfoxide detection.

Capillary sieving electrophoresis utilizing SDS (CE(SDS)) is one of the most applied methods for the analysis of antibody (mAb) size heterogeneity in the biopharmaceutical industry. Inadequate peak identification of observed protein fragments is still a major issue. In a recent publication, we introduced an electrophoretic 2D system, enabling online mass spectrometric detection of generic CE(SDS) separated peaks and identification of several mAb fragments. However, an improvement regarding system stability and handling of the approach was desired. Here, we introduce a novel 8-port valve in conjunction with an optimized decomplexation strategy. The valve contains four sample loops with increased distances between the separation dimensions. Thus, successively coinjection of solvent and cationic surfactant without any additional detector in the second dimension is enabled, simplifying the decomplexation strategy. Removal efficiency was optimized by testing different volumes of solvents as presample and cationic surfactant as postsample zone. 2D measurements of the light and heavy chain of the reduced NIST mAb with the 8-port valve and the optimized decomplexation strategy demonstrates the increased robustness of the system. The presented novel set-up is a step toward routine application of CE(SDS)-CZE-MS for impurity characterization of proteins in the biopharmaceutical field.

CZE is a well‐established technique for charge heterogeneity testing of biopharmaceuticals. It is based on the differences between the ratios of net charge and hydrodynamic radius. In an extensive intercompany study, it was recently shown that CZE is very robust and can be easily implemented in labs that did not perform it before. However, individual characteristics of some examined proteins resulted in suboptimal resolution. Therefore, enhanced method development principles were applied here to investigate possibilities for further method optimization. For this purpose, a high number of different method parameters was evaluated with the aim to improve CZE separation. For the relevant parameters, design of experiments (DoE) models were generated and optimized in several ways for different sets of responses like resolution, peak width and number of peaks. In spite of product specific DoE optimization it was found that the resulting combination of optimized parameters did result in significant improvement of separation for 13 out of 16 different antibodies and other molecule formats. These results clearly demonstrate generic applicability of the optimized CZE method. Adaptation to individual molecular properties may sometimes still be required in order to achieve optimal separation but the set screws discussed in this study [mainly pH, identity of the polymer additive (HPC versus HPMC) and the concentrations of additives like acetonitrile, butanolamine and TETA] are expected to significantly reduce the effort for specific optimization.

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) is the fundamental technique for protein separation by size. Applying this technology in capillary format, gaining high separation efficiency in a more automated way, is a key technology for size separation of proteins in the biopharmaceutical industry. However, unequivocal identification by online mass spectrometry (MS) is impossible so far, due to strong interference in the electrospray process by SDS and other components of the SDS-MW separation gel buffer. Here, a heart-cut two-dimensional electrophoretic separation system applying an electrically isolated valve with an internal loop of 20 nL is presented. The peak of interest in the CE (SDS) separation is transferred to the CZE-MS, where electrospray-interfering substances of the SDS-MW gel are separated prior to online electrospray ionization mass spectrometry. An online SDS removal strategy for decomplexing the protein-SDS complex is implemented in the second dimension, consisting of the co-injection of organic solvent and cationic surfactant. This online CE (SDS)-CZE-MS system allows MS characterization of proteoforms separated in generic CE (SDS), gaining additional separation in the CZE and detailed MS information. In general, the system can be applied to all kinds of proteins separated by CE (SDS). Here, we present results of the CE (SDS)-CZE-MS system on the analysis of several biopharmaceutically relevant antibody impurities and fragments. Additionally, the versatile application spectrum of the system is demonstrated by the analysis of extracted proteins from soybean flour. The online hyphenation of CE (SDS) resolving power and MS identification capabilities will be a powerful tool for protein and mAb characterization. Graphical abstract Two-dimensional capillary electrophoresis system hyphenated with mass spectrometry for the characterization of CE (SDS)-separated proteins. As first dimension, a generic and high MS-interfering CE (SDS) separation is performed for size separation. After heart-cut transfer of the unknown CE (SDS) protein peak, via a four-port nanoliter valve to a volatile electrolyte system as second dimension, interference-free mass spectrometric data of separated mAb fragments and soybean proteins are obtained.

Charge heterogeneity profiling is important for the quality control (QC) of biopharmaceuticals. Because of the increasing complexity of these therapeutic entities [1], the development of alternative analytical techniques is needed. In this work, flow‐through partial‐filling affinity capillary electrophoresis (FTPFACE) has been established as a method for the analysis of a mixture of two similar monoclonal antibodies (mAbs). The addition of a specific ligand results in the complexation of one mAb in the co‐formulation, thus changing its migration time in the electric field. This allows the characterization of the charged variants of the non‐shifted mAb without interferences. Adsorption of proteins to the inner capillary wall has been circumvented by rinsing with guanidine hydrochloride before each injection. The presented FTPFACE approach requires only very small amounts of ligands and provides complete comparability with a standard CZE of a single mAb.

Capillary electrophoresis is an important technique for the characterization of monoclonal antibodies (mAbs), especially in the pharmaceutical context. However, identification is difficult as upscaling and hyphenation of used methods directly to mass spectrometry is often not possible due to separation medium components that are incompatible with MS detection. Here a CE-MS method for the analysis of mAbs is presented analyzing SDS-complexed samples. To obtain narrow and intensive peaks of SDS-treated antibodies, an in-capillary strategy was developed based on the co-injection of positively charged surfactants and methanol as organic solvent. For samples containing 0.2% (v/v) of SDS, recovered MS peak intensities up to 97 and 95% were achieved using cetyltrimethylammonium bromide or benzalkonium chloride, respectively. Successful removal of SDS was shown in neutral coated capillaries but also in a capillary with a positively charged coating applying reversed polarity. The usefulness of this in-capillary strategy was demonstrated also for other proteins and for antibodies dissolved in up to 10% v/v SDS solution, and in other SDS-containing matrices, including the sieving matrix used in a standard CE-SDS method and gel-buffers applied in SDS-PAGE methods. The developed CE-MS approaches enable fast and reproducible characterization of SDS-complexed antibodies.

Capillary zone electrophoresis (CZE) is a powerful tool that is progressively being applied for the separation of monoclonal antibody (mAb) charge variants. Mass spectrometry (MS) is the desired detection method concerning identification of mAb variants. In biopharmaceutical applications, there exist optimized and validated electrolyte systems for mAb variant quantification. However, these electrolytes interfere greatly with the electrospray ionization (ESI) process. Here, a heart-cut CZE-CZE-MS setup with an implemented mechanical four-port valve interface was developed that used a generic ε-aminocaproic acid based background electrolyte in the first dimension and acetic acid in the second dimension. Interference-free, highly precise mass data (deviation less than 1 Da) of charge variants of trastuzumab, acting as model mAb system, were achieved. The mass accuracy obtained (low parts per million range) is discussed regarding both measured and calculated masses. Deamidation was detected for the intact model antibody, and related mass differences were significantly confirmed on the deglycosylated level. The CZE-CZE-MS setup is expected to be applicable to a variety of antibodies and electrolyte systems. Thus, it has the potential to become a compelling tool for MS characterization of antibody variants separated in ESI-interfering electrolytes. Graphical Abstract Two-dimensional capillary zone electrophoresis mass spectrometry for the characterization of intact monoclonal antibody (mAb) charge variants. A generic, but highly electrospray-interfering electrolyte system was used as first dimension for mAb charge variant separation and coupled to a volatile electrolyte system as second dimension via a four-port nanoliter valve. In this way, interference-free and precise mass spectrometric data of separated mAb charge variants, including deamidation products, were obtained.

An international team including 12 laboratories from 11 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of imaged capillary isoelectric focusing for the charge heterogeneity analysis of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charged isoforms for a representative monoclonal antibody sample using the same capillary isoelectric focusing assay. Statistical evaluation of the data was performed to determine within and between laboratory consistencies and outlying information. The apparent pI data generated for each charged variant peak showed very good precision between laboratories with RSD values of less than 0.8%. Similarly, the RSD for the therapeutic monoclonal antibody charged variants percent peak area values are less than 11% across different laboratories using different analyst, different lots of ampholytes and multiple instruments. These results validate the appropriate use of imaged capillary isoelectric focusing in the biopharmaceutical industry in support of process development and regulatory submissions of therapeutic antibodies.

Interlaboratory comparisons are essential to bringing emerging technologies into biopharmaceutical industry practice and regulatory acceptance. As a result, an international team including 12 laboratories from 10 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of capillary isoelectric focusing (CIEF) to assess the charge heterogeneity of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charge isoforms of a representative monoclonal antibody (rMAb) sample using the same CIEF method. Statistical evaluation of the data was performed to determine within and between-laboratory consistencies and outlying information. The apparent pI data generated for each charge variant peak showed very good precision between laboratories with percentage of RSD values of ≤0.5%. Similarly, the percentage of RSD for the rMAb charge variants percent peak area values are ≤4.4% across different laboratories with different analysts using different lots of ampholytes and multiple instruments. Taken together, these results validate the appropriate use of CIEF in the biopharmaceutical industry in support of regulatory submissions.

Two robust chiral standard separation systems were developed for the analysis of the chiral purity of chemically different model compounds applied in homogeneous asymmetric hydrogenation catalysis. Sulfated CDs were used as chiral selectors as they allow the analysis of neutral, acidic as well as basic compounds in the same electrophoretic system. Poorly water-soluble amines were dissolved in different organic solvent/buffer mixtures. Reproducibly, depending on the amount of organic solvent in the sample solution, peak splitting occurred and/or more peaks than expected were observed, implying impure model compounds. The dependence of the "chiral purity" on experimental parameters, e.g., kind and amount of sample solvent, length of injection plug, inner surface modification of the capillary, kind of sulfated CD, hydrophobicity, and basicity of the analytes, etc. was investigated. It is gathered that different equilibrium constants of the strong binding basic analytes and highly sulfated CD complex in the organic phase of the injection plug and the aqueous electrolyte phase are resulting in two different mobility zones for each enantiomer. It follows that each enantiomer is showing two peaks instead of one. Experimental strategies are shown to avoid these peak splitting/artificial impurity effects and obtain the "real" chiral purity picture of the samples.

Within pharmaceutical industry charge heterogeneity testing of biopharmaceuticals has to be reproducible and fast. It should pass method validation according to ICH Q2. Classical approaches for the analysis of the charge heterogeneity of biopharmaceuticals are ion exchange chromatography (IEC) and isoelectric focusing (IEF). As an alternative approach, also capillary zone electrophoresis (CZE) was expected to allow reliable charge heterogeneity profiling by separation according to the analyte's net charge and hydrodynamic radius. Aim of this study was to assess if CZE possesses all of the required features. Therefore, beside lab internal validation of this method also an international cross company study was organized. It was shown that CZE is applicable across a broad pI range between 7.4 and 9.5. The coefficient of correlation was above 0.99 which demonstrated linearity. Precision by repeatability was around 1% (maximum relative standard deviation per level) and accuracy by recovery was around 100% (mean recovery per level). Accuracy was further verified by direct comparison of IEC, IEF and CZE, which in this case showed comparable %CPA results for all three methods. However, best resolution for the investigated MAb was obtained with CZE. In dependence on sample concentration the detection limit was between 1 and 3%. Within the intercompany study for CZE the same stressed and non-stressed samples were analyzed in each of the 11 participating labs. The finally obtained dataset contained more than 1000 separations which provided an extended dataset for further statistical evaluation. Among the different labs no significant differences between the peak profiles were observed. Mean driver for dropouts in quantitative evaluation was linked to the performance of some participating labs while the impact of the method performance was negligible. In comparison to a 50cm capillary there was a slightly better separation of impurities and drug substance related compounds with a 30cm capillary which demonstrates that an increased stability indicating potential can be combined with the increased separation velocity and high throughput capability of a shorter capillary. Separation can be performed in as little as approx. 3min allowing high throughput applications. The intercompany study delivered precise results without explicit training of the participating labs in the method prior to the study (standard deviations in the range of 1%). It was demonstrated that CZE is an alternative platform technology for the charge heterogeneity testing of antibodies in the pharmaceutical industry.

Protein phosphorylation on serine/threonine side chains represents a major regulatory event in the posttranslational control of protein functionality, where it is thought to operate at the level of structural changes in the polypeptide chain. However, key questions about molecular aspects of phosphate ester induced conformational alterations remain open. Among these concerns are the radius of action of the phosphate ester group, its effective ionic state, and its interplay with distinct bonds of the polypeptide chain. Primarily to define short-range effects upon threonine phosphorylation, the native 65 amino acid protein hirudin, conformationally restrained by a proline flanking the pThr(45) site and three intramolecular disulfide bonds, was structurally characterized in both the phosphorylated and the unphosphorylated state in solution. Circular dichroism and hydrogen exchange experiments (MALDI-TOF) showed that structural changes were caused by Thr(45)-Pro(46) phosphorylation only when the phosphate ester group was in its dianionic state. The spatial arrangement of the amino acids, monitored by 1H NMR spectroscopy, appears to be affected within a radius of about 10 A around the pThr(45)-OgammaH, with phosphorylation resulting in a loss of structure and increased flexibility within a segment of at least seven amino acid residues. Thus, the transition from the monoanionic to the dianionic phosphate group over the pH range 5.2-8.5 represents a general phosphorylation-dependent conformational switch operating at physiological pH values.

A screening procedure for protein-protein interactions in cellular extracts using a green fluorescent protein (GFP) and affinity capillary electrophoresis (ACE) was established. GFP was fused as a fluorescent indicator to the C-terminus of a cyclophilin (rDmCyp20) from Drosophila melanogaster. Cyclophilins (Cyps) belong to the ubiquitously distributed enzyme family of peptidyl-prolyl cis/trans isomerases (PPlases) and are well known as cellular targets of the immunosuppressive drug cyclosporin A (CsA). The PPlase activity of the GFP fused rDmCyp20 as well as the high affinity to CsA remain intact. Using native gel electrophoresis and ACE mobility-shift assays, it was demonstrated that the known moderate affinity of Cyp20 to the capsid protein p24 of HIV-1 was detectable in the case of rDmCyp20 fused to the fluorescent tag. For the p24 / rDmCyp20-GFP binding an ACE method was established which allowed to determine a dissociation constant of Kd = 20+/-1.5 x 10(-6) M. This result was verified by size-exclusion chromatography and is in good agreement with published data for the nonfused protein. Moreover the fusion protein was utilized to screen rDmCyp20-protein interactions by capillary electrophoresis in biological matrices. A putative ligand of rDmCyp20 in crude extracts of embryonic D. melanogaster was discovered by mobility-shift assays using native gel electrophoresis with fluorescence imaging and ACE with laser-induced fluorescence detection. The approach seems applicable to a wide range of proteins and offers new opportunities to screen for moderate protein-protein interactions in biological samples.

An international team including 12 laboratories from 11 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of imaged capillary isoelectric focusing for the charge heterogeneity analysis of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charged isoforms for a representative monoclonal antibody sample using the same capillary isoelectric focusing assay. Statistical evaluation of the data was performed to determine within and between laboratory consistencies and outlying information. The apparent pI data generated for each charged variant peak showed very good precision between laboratories with RSD values of less than 0.8%. Similarly, the RSD for the therapeutic monoclonal antibody charged variants percent peak area values are less than 11% across different laboratories using different analyst, different lots of ampholytes and multiple instruments. These results validate the appropriate use of imaged capillary isoelectric focusing in the biopharmaceutical industry in support of process development and regulatory submissions of therapeutic antibodies.

The application of affinity capillary electrophoresis (ACE), a submode of capillary zone electrophoresis, to investigate the interactions between ligands and their substrates is described in this chapter. Using ACE, it is possible to characterize noncovalent molecular interactions (complexation and partition equilibria) of different binding strengths. Resulting association constants (K) provide a measured value of the affinity of a ligand molecule to a substrate. Starting with the background of high-performance capillary electrophoresis (HPCE), in general, and ACE, various possibilities are given how ACE can be used in capillaries or chips. A brief mathematical description of the context between measured parameters (ionic mobility, peak area, or peak height) and evaluated binding parameters (as binding constants and stoichiometry number), as well as various ACE modes and constellations of intermolecular interacting molecules suitable for a wide range of applications are provided. Finally, selected applications are described in detail in terms of the experimental setup and estimation of the binding strength by a suitable mathematical model. Keywords: affinity capillary electrophoresis; binding constant; interaction; biomolecules; receptor ligand; stoichiometry

Recently, several therapeutic double-stranded (ds) oligonucleotides (ODNs) are in pharmaceutical development. During quality control, these therapeutic molecules have to be characterized with respect to their identity, their content and their impurity profile. It follows that the ds molecule as well as its process- and product-related impurities have to be quantified. The single strands are considered as process as well as product-related impurities in the ds drug substance. Applying well known, conventional, single-base resolution CE-CGE systems developed for the quality control of single-stranded antisense ODNs in the early 1990s, it turned out that the ds ODNs under investigation are migrating in broad, splitted peaks between the peaks reaction zones are observed. It follows that the quantification of the single strands in the drug substance as well as quantification of other product-related impurities, e.g. n-1; n-2 (loss of one and two bases (n), respectively) etc., are not possible without adaptation of the test system. The paper shows how the test system was adjusted in order to determine single-stranded strands as well as ds strands next to each other quantitatively in the ds drug substance under investigation.

Affinity capillary electrophoresis using mobility-shift analysis was utilized to characterize the binding of peptide ligands to cyclophilins, which are members of the enzyme family of peptidyl-prolyl cis / trans isomerases. Peptides derived from the human immunodeficiency virus capsid protein p24 exhibited different affinities to the isoenzymes cyclophilin18 and cyclophilin20. For the interaction of the peptide hormone bradykinin with cyclophilin18, a dissociation constant of 1.4±0.1 m M was determined. Finally, the affinity of cyclophilin20 to peptides from a cellulose-bound peptide library scanning the sequence of Drosophila melanogaster protein cappuccino was investigated. The affinities of selected peptides to cyclophilin20 and a green fluorescent fusion protein with cyclophilin20 were compared.

The affinity capillary electrophoretic separation of the complex of the enzyme cyclophilin (Cyp) with the immunosuppressive drug cyclosporin A (CsA) from uncomplexed Cyp and CsA in phosphate buffer (pH 8) under non-denaturing conditions by equilibrium-mixture analysis is reported. Using a new approach combining mobility-shift analysis and electrophoretically mediated microanalysis the binding constant of rhCyp18 to CsA and derivatives was estimated.