Search

Polyethylene terephthalate (PET), the most common synthetic polyester today, is largely produced from fossil resources, contributing to global warming. Consequently, sustainable sources must be developed to meet the increasing demand for this useful polymer. Here, we demonstrate a cascaded value chain that provides green PET from lignin, the world's most underutilized renewable, via fermentative production of cis, cis-muconate (MA) from lignin-based aromatics as a central step. Catechol, industrially the most relevant but apparently also a highly toxic lignin-related aromatic, strongly inhibited MA-producing Pseudomonas putida MA-1. Assessed by 13 C metabolic flux analysis, the microbe substantially redirected its carbon core fluxes, resulting in enhanced NADPH supply for stress defense but causing additional ATP costs. The reconstruction of MA production in a genome-reduced P. putida chassis yielded novel producers with superior pathway fluxes and enhanced robustness to catechol and a wide range of other aromatics. Using the advanced producer P. putida MA-10 catechol, MA could be produced in a fed-batch process from catechol (plus glucose as additional growth substrate) up to an attractive titer of 74 g L -1 and a space-time-yield of 1.4 g L -1 h -1 . In terms of co-consumed sugar, the further streamlined strain MA-11 achieved the highest yield of 1.4 mol MA (mol glucose) -1 , providing a striking economic advantage. Following fermentative production, bio-based MA was purified and used to chemically synthetize the PET monomer terephthalic acid and the comonomer diethylene glycol terephthalic acid through five steps, which finally enabled the first green PET from lignin., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Endotoxins are a highly pyrogenic and immunogenic contaminant of bacterial origin that must be avoided during the manufacturing of biopharmaceutical products to ensure safety and efficacy. Low endotoxin recovery, also known as a masking effect, is defined as the ability to detect <50% [21] of the expected endotoxin in an endotoxin assay. Masking can be caused by the ability of endotoxins to build aggregates, bind to the protein or organise in micelles or vesicles that in turn inhibit detection of the endotoxin in the solution being tested. Therefore, a masking effect can result from physical parameters of the molecule being tested or from the buffer/environmental conditions of the solution the molecule is in. This can subsequently lead to the underestimation of endotoxin contaminations and lead to a potential false negative test. Tight control over the effectiveness of the downstream process and the use of well-characterised endotoxin testing assays are needed to ensure optimal endotoxin removal. This manuscript demonstrates the capacity to remove the endotoxins within a proven acceptable range by also controlling and evaluating the potential masking effects during downstream process at ambient temperature and also during sample storage condition until the analyse was performed. The endotoxin removal study (ERS) is divided in the initial part to evaluate the process buffers and the conditions of the molecule to avoid the underestimation of endotoxins in process samples in advance. This pre-study is a necessary prerequisite to evaluate the results after the endotoxin spiked downstream unit operations. With those aspects, the removal capacity can be demonstrated. A study was carried out to characterise the endotoxin removal capability of the purification process including controlling of masking effects. The endotoxin removal capacity on ion exchange chromatography and during ultrafiltration/diafiltration unit operations of the downstream processing of an immunoglobulin G1 antibody was conducted using various process parameters to understand their impact on endotoxin removal. In the small-scale study, the processing steps from each tested unit operation were spiked with Escherichia coli endotoxins. The potential masking effect during purification was addressed by controlling the hold time by spiking studies of the different generated pools at ambient temperature. By conducting a masking study, all generated protein pools (flow-through/wash, eluate and regeneration pools) had no masking effect caused through sample handling prior to analysis. Overall, this study showed that endotoxins could be successfully removed by anion exchange chromatography. A partial removal could be achieved by cation exchange chromatography and endotoxins could not be removed with ultrafiltration/diafiltration., Competing Interests: Declaration of Competing Interest None, (Copyright © 2022. Published by Elsevier B.V.)

In recent years, acceleration of development timelines has become a major focus within the biopharmaceutical industry to bring innovative therapies faster to patients. However, in order to address a high unmet medical need even faster further acceleration potential has to be identified to transform "speed-to-clinic" concepts into "warp-speed" development programs. Recombinant Chinese hamster ovary (CHO) cell lines are the predominant expression system for monoclonal antibodies (mAbs) and are routinely generated by random transgene integration (RTI) of the genetic information into the host cell genome. This process, however, exhibits considerable challenges such as the requirement for a time-consuming clone screening process to identify a suitable clonally derived manufacturing cell line. Hence, RTI represents an error prone and tedious method leading to long development timelines until availability of Good Manufacturing Practice (GMP)-grade drug substance (DS). Transposase-mediated semi-targeted transgene integration (STI) has been recently identified as a promising alternative to RTI as it allows for a more rapid generation of high-performing and stable production cell lines. In this report, we demonstrate how a STI technology was leveraged to develop a very robust DS manufacturing process based on a stable pool cell line at unprecedented pace. Application of the novel strategy resulted in the manufacturing of GMP-grade DS at 2,000 L scale in less than three months paving the way for a start of Phase I clinical trials only six months after transfection. Finally, using a clonally derived production cell line, which was established from the parental stable pool, we were able to successfully implement a process with an increased mAb titer of up to 5 g per liter at the envisioned commercial scale (12,000 L) within eight months., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

Lignin is an abundant and heterogeneous waste byproduct of the cellulosic industry, which has the potential of being transformed into valuable biochemicals via microbial fermentation. In this study, we applied a fast-pyrolysis process using softwood lignin resulting in a two-phase bio-oil containing monomeric and oligomeric aromatics without syringol. We demonstrated that an additional hydrodeoxygenation step within the process leads to an enhanced thermochemical conversion of guaiacol into catechol and phenol. After steam bath distillation, Pseudomonas putida KT2440-BN6 achieved a percent yield of cis, cis-muconic acid of up to 95 mol% from catechol derived from the aqueous phase. We next established a downstream process for purifying cis, cis-muconic acid (39.9 g/L) produced in a 42.5 L fermenter using glucose and benzoate as carbon substrates. On the basis of the obtained values for each unit operation of the empirical processes, we next performed a limited life cycle and cost analysis of an integrated biotechnological and chemical process for producing adipic acid and then compared it with the conventional petrochemical route. The simulated scenarios estimate that by attaining a mixture of catechol, phenol, cresol, and guaiacol (1:0.34:0.18:0, mol ratio), a titer of 62.5 (g/L) cis, cis-muconic acid in the bioreactor, and a controlled cooling of pyrolysis gases to concentrate monomeric aromatics in the aqueous phase, the bio-based route results in a reduction of CO 2 -eq emission by 58% and energy demand by 23% with a contribution margin for the aqueous phase of up to 88.05 euro/ton. We conclude that the bio-based production of adipic acid from softwood lignins brings environmental benefits over the petrochemical procedure and is cost-effective at an industrial scale. Further research is essential to achieve the proposed cis, cis-muconic acid yield from true lignin-derived aromatics using whole-cell biocatalysts., (© 2020 Wiley Periodicals, Inc.)

Background: The Gram-positive facultative methylotrophic bacterium Bacillus methanolicus uses the sedoheptulose-1,7-bisphosphatase (SBPase) variant of the ribulose monophosphate (RuMP) cycle for growth on the C 1 carbon source methanol. Previous genome sequencing of the physiologically different B. methanolicus wild-type strains MGA3 and PB1 has unraveled all putative RuMP cycle genes and later, several of the RuMP cycle enzymes of MGA3 have been biochemically characterized. In this study, the focus was on the characterization of the transaldolase (Ta) and its possible role in the RuMP cycle in B. methanolicus., Results: The Ta genes of B. methanolicus MGA3 and PB1 were recombinantly expressed in Escherichia coli, and the gene products were purified and characterized. The PB1 Ta protein was found to be active as a homodimer with a molecular weight of 54 kDa and displayed K M of 0.74 mM and V max of 16.3 U/mg using Fructose-6 phosphate as the substrate. In contrast, the MGA3 Ta gene, which encodes a truncated Ta protein lacking 80 amino acids at the N-terminus, showed no Ta activity. Seven different mutant genes expressing various full-length MGA3 Ta proteins were constructed and all gene products displayed Ta activities. Moreover, MGA3 cells displayed Ta activities similar as PB1 cells in crude extracts., Conclusions: While it is well established that B. methanolicus can use the SBPase variant of the RuMP cycle this study indicates that B. methanolicus possesses Ta activity and may also operate the Ta variant of the RuMP.

Cis,cis-muconic acid (MA) is a chemical that is recognized for its industrial value and is synthetically accessible from aromatic compounds. This feature provides the attractive possibility of producing MA from mixtures of aromatics found in depolymerized lignin, the most underutilized lignocellulosic biopolymer. Based on the metabolic pathway, the catechol (1,2-dihydroxybenzene) node is the central element of this type of production process: (i) all upper catabolic pathways of aromatics converge at catechol as the central intermediate, (ii) catechol itself is frequently generated during lignin pre-processing, and (iii) catechol is directly converted to the target product MA by catechol 1,2-dioxygenase. However, catechol is highly toxic, which poses a challenge for the bio-production of MA. In this study, the soil bacterium Pseudomonas putida KT2440 was upgraded to a fully genome-based host for the production of MA from catechol and upstream aromatics. At the core of the cell factories created was a designed synthetic pathway module, comprising both native catechol 1,2-dioxygenases, catA and catA2, under the control of the P cat promoter. The pathway module increased catechol tolerance, catechol 1,2-dioxygenase levels, and catechol conversion rates. MA, the formed product, acted as an inducer of the module, triggering continuous expression. Cellular energy level and ATP yield were identified as critical parameters during catechol-based production. The engineered MA-6 strain achieved an MA titer of 64.2 g L -1 from catechol in a fed-batch process, which repeatedly regenerated the energy levels via specific feed pauses. The developed process was successfully transferred to the pilot scale to produce kilograms of MA at 97.9% purity. The MA-9 strain, equipped with a phenol hydroxylase, used phenol to produce MA and additionally converted o-cresol, m-cresol, and p-cresol to specific methylated variants of MA. This strain was used to demonstrate the entire value chain. Following hydrothermal depolymerization of softwood lignin to catechol, phenol and cresols, MA-9 accumulated 13 g L -1 MA and small amounts of 3-methyl MA, which were hydrogenated to adipic acid and its methylated derivative to polymerize nylon from lignin for the first time., (Copyright © 2018. Published by Elsevier Inc.)

Background: Transketolase (TKT) is a key enzyme of the pentose phosphate pathway (PPP), the Calvin cycle and the ribulose monophosphate (RuMP) cycle. Bacillus methanolicus is a facultative RuMP pathway methylotroph. B. methanolicus MGA3 harbors two genes putatively coding for TKTs; one located on the chromosome (tkt(C)) and one located on the natural occurring plasmid pBM19 (tkt(P))., Results: Both enzymes were produced in recombinant Escherichia coli, purified and shown to share similar biochemical parameters in vitro. They were found to be active as homotetramers and require thiamine pyrophosphate for catalytic activity. The inactive apoform of the TKTs, yielded by dialysis against buffer containing 10 mM EDTA, could be reconstituted most efficiently with Mn(2+) and Mg(2+). Both TKTs were thermo stable at physiological temperature (up to 65°C) with the highest activity at neutral pH. Ni(2+), ATP and ADP significantly inhibited activity of both TKTs. Unlike the recently characterized RuMP pathway enzymes fructose 1,6-bisphosphate aldolase (FBA) and fructose 1,6-bisphosphatase/sedoheptulose 1,7-bisphosphatase (FBPase/SBPase) from B. methanolicus MGA3, both TKTs exhibited similar kinetic parameters although they only share 76% identical amino acids. The kinetic parameters were determined for the reaction with the substrates xylulose 5-phosphate (TKT(C): kcat/KM: 264 s(-1) mM(-1); TKT(P): kcat/KM: 231 s(-1) mM) and ribulose 5-phosphate (TKT(C): kcat/KM: 109 s(-1) mM; TKT(P): kcat/KM: 84 s(-1) mM) as well as for the reaction with the substrates glyceraldehyde 3-phosphate (TKT(C): kcat/KM: 108 s(-1) mM; TKT(P): kcat/KM: 71 s(-1) mM) and fructose 6-phosphate (TKT(C) kcat/KM: 115 s(-1) mM; TKT(P): kcat/KM: 448 s(-1) mM)., Conclusions: Based on the kinetic parameters no major TKT of B. methanolicus could be determined. Increased expression of tkt(P), but not of tkt(C) during growth with methanol [J Bacteriol 188:3063-3072, 2006] argues for TKT(P) being the major TKT relevant in the RuMP pathway. Neither TKT exhibited activity as dihydroxyacetone synthase, as found in methylotrophic yeast, or as the evolutionary related 1-deoxyxylulose-5-phosphate synthase. The biological significance of the two TKTs for B. methanolicus methylotrophy is discussed.

The genome of the facultative ribulose monophosphate (RuMP) cycle methylotroph Bacillus methanolicus encodes two bisphosphatases (GlpX), one on the chromosome (GlpX(C)) and one on plasmid pBM19 (GlpX(P)), which is required for methylotrophy. Both enzymes were purified from recombinant Escherichia coli and were shown to be active as fructose 1,6-bisphosphatases (FBPases). The FBPase-negative Corynebacterium glutamicum Δfbp mutant could be phenotypically complemented with glpX(C) and glpX(P) from B. methanolicus. GlpX(P) and GlpX(C) share similar functional properties, as they were found here to be active as homotetramers in vitro, activated by Mn(2+) ions and inhibited by Li(+), but differed in terms of the kinetic parameters. GlpX(C) showed a much higher catalytic efficiency and a lower Km for fructose 1,6-bisphosphate (86.3 s(-1) mM(-1) and 14 ± 0.5 μM, respectively) than GlpX(P) (8.8 s(-1) mM(-1) and 440 ± 7.6 μM, respectively), indicating that GlpX(C) is the major FBPase of B. methanolicus. Both enzymes were tested for activity as sedoheptulose 1,7-bisphosphatase (SBPase), since a SBPase variant of the ribulose monophosphate cycle has been proposed for B. methanolicus. The substrate for the SBPase reaction, sedoheptulose 1,7-bisphosphate, could be synthesized in vitro by using both fructose 1,6-bisphosphate aldolase proteins from B. methanolicus. Evidence for activity as an SBPase could be obtained for GlpX(P) but not for GlpX(C). Based on these in vitro data, GlpX(P) is a promiscuous SBPase/FBPase and might function in the RuMP cycle of B. methanolicus.

The thermotolerant Gram-positive methylotroph Bacillus methanolicus is able to grow with methanol, glucose or mannitol as a sole carbon and energy source. Fructose 1,6-bisphosphate aldolase (FBA), a key enzyme of glycolysis and gluconeogenesis, is encoded in the genome of B. methanolicus by two putative fba genes, the chromosomally located fba(C) and fba(P) on the naturally occurring plasmid pBM19. Their amino acid sequences share 75 % identity and suggest a classification as class II aldolases. Both enzymes were purified from recombinant Escherichia coli and were found to be active as homotetramers. Both enzymes were activated by either manganese or cobalt ions, and inhibited by ADP, ATP and EDTA. The kinetic parameters allowed us to distinguish the chromosomally encoded FBA(C) from the plasmid encoded FBA(P), since FBA(C) showed higher affinity towards fructose 1,6-bisphosphate (Km of 0.16±0.01 mM as compared to 2±0.08 mM) as well as higher glycolytic catalytic efficiency (31.3 as compared to 0.8 s(-1) mM(-1)) than FBA(P). However, FBA(P) exhibited a higher catalytic efficiency in gluconeogenesis (50.4 as compared to 1.4 s(-1) mM(-1) with dihydroxyacetone phosphate and 4 as compared to 0.4 s(-1) mM(-1) with glyceraldehyde 3-phosphate as limiting substrate). The aldolase-negative Corynebacterium glutamicum mutant Δfda could be complemented with both FBA genes from B. methanolicus. Based on the kinetic data, we propose that FBA(C) acts as major aldolase in glycolysis, whereas FBA(P) acts as major aldolase in gluconeogenesis in B. methanolicus.