Search

Mass-spectrometry based assays in structural biology studies measure either intact or digested proteins. Typically, different mass spectrometers are dedicated for such measurements: those optimized for rapid analysis of peptides or those designed for high molecular weight analysis. A commercial trapped ion mobility-quadrupole-time-of-flight (TIMS-Q-TOF) platform is widely utilized for proteomics and metabolomics, with ion mobility providing a separation dimension in addition to liquid chromatography. The ability to perform high-quality native mass spectrometry of protein complexes, however, remains largely uninvestigated. Here, we evaluate a commercial TIMS-Q-TOF platform for analyzing noncovalent protein complexes by utilizing the instrument's full range of ion mobility, MS, and MS/MS (both in-source activation and collision cell CID) capabilities. The TIMS analyzer is able to be tuned gently to yield collision cross sections of native-like complexes comparable to those previously reported on various instrument platforms. In-source activation and collision cell CID were robust for both small and large complexes. TIMS-CID was performed on protein complexes streptavidin (53 kDa), avidin (68 kDa), and cholera toxin B (CTB, 58 kDa). Complexes pyruvate kinase (237 kDa) and GroEL (801 kDa) were beyond the trapping capabilities of the commercial TIMS analyzer, but TOF mass spectra could be acquired. The presented results indicate that the commercial TIMS-Q-TOF platform can be used for both omics and native mass spectrometry applications; however, modifications to the commercial RF drivers for both the TIMS analyzer and quadrupole (currently limited to m / z 3000) are necessary to mobility analyze protein complexes greater than about 60 kDa.

Engineered protein switches have been widely applied in cell-based protein sensors and point-of-care diagnosis for the rapid and simple analysis of a wide variety of proteins, metabolites, nucleic acids, and enzymatic activities. Currently, these protein switches are based on two main types of switching mechanisms to transduce the target binding event to a quantitative signal, through a change in the optical properties of fluorescent molecules and the activation of enzymatic activities. In this paper, we introduce a new affinity-tunable protein switch strategy in which the binding of a small-molecule target with the protein activates the streptavidin-biotin interaction to generate a readout signal. In the absence of a target, the biotinylated protein switch forms a closed conformation where the biotin is positioned in close proximity to the protein, imposing a large steric hindrance to prevent the effective binding with streptavidin. In the presence of the target molecule, this steric hindrance is removed, thereby exposing the biotin for streptavidin binding to produce strong fluorescent signals. With this modular sensing concept, various sulfonamide, methotrexate, and trimethoprim drugs can be selectively detected on the cell surface of native and genetically engineered cells using different fluorescent dyes and detection techniques.

Molecular machines, as exemplified by the kinesin and microtubule system, are responsible for molecular transport in cells. The monitoring of the cellular machinery has attracted much attention in recent years, requiring sophisticated techniques such as optical tweezers, and dark field hyperspectral and fluorescence microscopies. It also demands suitable procedures for immobilization and labeling with functional agents such as dyes, plasmonic nanoparticles and quantum dots. In this work, microtubules were co-polymerized by incubating a tubulin mix consisting of 7 biotinylated tubulin to 3 rhodamine tubulin. Rhodamine provided the fluorescent tag, while biotin was the anchoring group for receiving streptavidin containing species. To control the microtubule alignment and consequently, the molecular gliding directions, functionalized iron oxide nanoparticles were employed in the presence of an external magnet field. Such iron oxide nanoparticles, (MagNPs) were previously coated with silica and (3-aminopro-pyl)triethoxysilane (APTS) and then modified with streptavidin (SA) for linking to the biotin-functionalized microtubules. In this way, the binding has been successfully performed, and the magnetic alignment probed by Inverted Fluorescence Microscopy. The proposed strategy has proved promising, as tested with one of the most important biological structures of the cellular machinery.

Intense electromagnetic (EM) hot-spots arising at the junctions or gaps in plasmonic nanoparticle assemblies can drive ultrahigh sensitivity in molecular detection by surface-enhanced spectroscopies. Harnessing this potential however requires access to the confined physical space at the EM hot-spots, which is a challenge for larger analytes such as biomolecules. Here, we demonstrate self-assembly derived gold nanoparticle cluster arrays (NCAs) on gold substrates exhibiting controlled interparticle (<1 nm wide) and intercluster (<10 nm wide) hot-spots as highly promising in this direction. Sensitivity of the NCAs toward detection of small (<1 nm) or large (protein-receptor interactions) analytes in surface-enhanced Raman and metal-enhanced fluorescence assays is found to be strongly impacted by the size of the cluster and the presence of reflective substrates. Experiments supported by numerical simulations attribute the higher sensitivity to higher EM field enhancements at the hot-spots, as well as greater analyte leverage over EM hot-spots. The best-performing arrays could push the sensitivity down to picomolar detection limits for sub-nanometric organic analytes as well as large protein analytes. The investigation paves the way for rational design of plasmonic biosensors and highlights the unique capabilities of a molecular self-assembly approach toward catering to this objective.

Nowadays, there is an increasing demand for more accessible routine diagnostics for patients with respect to high accuracy, ease of use, and low cost. However, the quantitative and high accuracy bioassays in large hospitals and laboratories usually require trained technicians and equipment that is both bulky and expensive. In addition, the multistep bioassays and long turnaround time could severely affect the disease surveillance and control especially in pandemics such as influenza and COVID-19. In view of this, a portable, quantitative bioassay device will be valuable in regions with scarce medical resources and help relieve burden on local healthcare systems. Herein, we introduce the MagiCoil diagnostic device, an inexpensive, portable, quantitative, and rapid bioassay platform based on the magnetic particle spectrometer (MPS) technique. MPS detects the dynamic magnetic responses of magnetic nanoparticles (MNPs) and uses the harmonics from oscillating MNPs as metrics for sensitive and quantitative bioassays. This device does not require trained technicians to operate and employs a fully automatic, one-step, and wash-free assay with a user friendly smartphone interface. Using a streptavidin-biotin binding system as a model, we show that the detection limit of the current portable device for streptavidin is 64 nM (equal to 5.12 pmole). In addition, this MPS technique is very versatile and allows for the detection of different diseases just by changing the surface modifications on MNPs. Although MPS-based bioassays show high sensitivities as reported in many literatures, at the current stage, this portable device faces insufficient sensitivity and needs further improvements. It is foreseen that this kind of portable device can transform the multistep, laboratory-based bioassays to one-step field testing in nonclinical settings such as schools, homes, offices, etc.

The alkaline phosphatase-streptavidin enzyme amplification conjugate (APSA) was diluted and quantified to the equivalent of one enzyme molecule injected on column by monitoring the production of excess adenosine from adenosine monophosphate (AMP) using sensitive and selective enzyme-linked mass spectrometric assay. The APSA enzyme conjugate has a mass of about 195 kDa and catalyzed the production of millions of enzyme products over the course of incubation that may be sensitively quantified by liquid chromatography, electrospray ionization, and mass spectrometry. APSA enzyme conjugate from fg/mL to ag/mL alongside 0 g/mL (control) was incubated with the substrate 1 mM AMP for 2 h in free solution before collecting a 1 μL of sample of the enzyme product adenosine for injection and analysis by LC-MS. The enzyme product adenosine showed a Gaussian distribution after log 10 transformation. The safe limit of detection and quantification was approximately 250 zg of APSA enzyme conjugate injected on column. A linear signal with acceptable error was observed at the mass of the enzyme product adenosine from 10 to 10000 zg of APSA enzyme conjugate injected, compared to controls without enzyme. It was possible to make a linear and Gaussian measurement to the single molecule range of the universal APSA enzyme amplification conjugate per micro liter injected with approximately 10% error. This study describes the first linear and Gaussian quantification of enzyme product from the equivalent of one enzyme conjugate molecule injected onto LC-MS for analysis.

The toxic protein of ricin has drawn wide attention in recent years as a potential bioterrorism agent due to its high toxicity and wide availability. For the verification of the potential anti-terrorism activities, it is urgent for the quantification of ricin in food-related matrices. Here, a novel strategy of trypsin/Glu-C tandem digestion was introduced for quantitative detection of ricin marker peptides in several beverage matrices using isotope-labeled internal standard (IS)-mass spectrometry. The ricin in beverages was captured and enriched by biotinylated anti-ricin polyclonal antibodies conjugated to streptavidin magnetic beads. The purified ricin was cleaved using the developed trypsin/Glu-C tandem digestion method and then quantitatively detected by ultra-high-pressure liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) with isotope-labeled T7A and TG11B selected as IS. The use of trypsin/Glu-C digestion allows shorter peptides, which are more suitable for MS detection, to be obtained than the use of single trypsin digestion. Under the optimized tandem digestion condition, except for T7A in the A-chain, two resulting specific peptides of TG13A, TG28A from the A-chain and two of TG11B, TG33B from the B-chain were chosen as novel marker peptides with high MS response. The uniqueness of the selected marker peptides allows for unambiguous identification of ricin among its homologous proteins in a single run. The MS response of the four novel marker peptides is increased by more than 10 times compared with that of individual corresponding tryptic peptides. Both the marker peptides of A-chain T7A and B-chain TG11B were selected as quantitative peptides based on the highest MS response among the marker peptides from their individual chains. The limit of detection (LOD) of ricin is 0.1 ng/mL in PBS and 0.5 ng/mL in either milk or orange juice. The linear range of calibration curves for ricin were 0.5-300 ng/mL in PBS, 1.0-400 ng/mL in milk, and 1.0-250 ng/mL in orange juice. The method accuracy ranged between 82.6 and 101.8% for PBS, 88.9-105.2% for milk, and 95.3-118.7% for orange juice. The intra-day and inter-day precision had relative standard deviations (%RSD) of 0.3-9.4%, 0.7-8.9%, and 0.2-6.9% in the three matrices respectively. Furthermore, whether T7A or TG11B is used as a quantitative peptide, the quantitative results of ricin are consistent. This study provides not only a practical method for the absolute quantification of ricin in beverage matrices but also a new strategy for the investigation of illegal use of ricin in chemical weapon verification tasks such as OPCW biotoxin sample analysis exercises.

Hybrid material surfaces on microparticles are emerging as vehicles for many biomedical multiplexing applications. Functionalization of these hybrid surface microparticles to biomolecules presents unique challenges related to optimization of surface chemistries including uniformity, repeatability, and sample sparring. Hybrid interfaces between microlevel surfaces and individual biomolecules will provide different microenvironments impacting the surface functionalization optimization and efficiency. Here, we propose and validate the first demonstration of streptavidin adsorption-based antibody functionalization on unmodified, hybrid surface microparticles for in vitro analysis. We test this analytical technique and fabricate hybrid surface microparticles with a polystyrene core and aluminum oxide semi-coating. Additionally, we optimize the streptavidin-biotin functionalization chemistry in both assay implementation and sample sparring via analytical mass balances for these microparticles and subsequently conjugate anti-human CD11b antibodies. Result confirmation and characterization occurs from ultraviolet protein absorbance and ImageJ processing of fluorescence microscopy images. Additionally, we design and implement the multi-sectional imaging (MSI) approach to support functionalization uniformity on the hybrid surface microparticles. Finally, as a proof-of-concept performance, we validate anti-CD11b antibodies functionalization by visualizing hybrid surface microparticles conjugate to human neutrophils isolated from blood samples collected from potentially septic patients. Our study introduces and defines a category of functionalization for hybrid surface microparticles with the intent of minuscule sample volumes, low cost, and low environmental impact to be used for many cellular or proteomic in vitro multiplexing applications in the future. Graphical abstract.

To demonstrate the potential of time-resolved flow cytometry (FCM) for bioanalysis, clinical diagnostics, and optically encoded bead-based assays, we performed a proof-of-principle study to detect biomolecular interactions utilizing fluorescence lifetime (LT)-encoded micron-sized polymer beads bearing target-specific bioligands and a recently developed prototype lifetime flow cytometer (LT-FCM setup). This instrument is equipped with a single excitation light source and different fluorescence detectors, one operated in the photon-counting mode for time-resolved measurements of fluorescence decays and three detectors for conventional intensity measurements in different spectral windows. First, discrimination of bead-bound biomolecules was demonstrated in the time domain exemplarily for two targets, Streptavidin (SAv) and the tumor marker human chorionic gonadotropin (HCG). In a second step, the determination of biomolecule concentration levels was addressed representatively for the inflammation-related biomarker tumor necrosis factor (TNF-α) utilizing fluorescence intensity measurements in a second channel of the LT-FCM instrument. Our results underline the applicability of LT-FCM in the time domain for measurements of biomolecular interactions in suspension assays. In the future, the combination of spectral and LT encoding and multiplexing and the expansion of the time scale from the lower nanosecond range to the longer nanosecond and the microsecond region is expected to provide many distinguishable codes. This enables an increasing degree of multiplexing which could be attractive for high throughput screening applications.

Aluminum has recently attracted considerable interest as a plasmonic material due to its unique optical properties, but most work has been limited to nanostructures. We report here SPR biosensing with aluminum thin-films using the standard Kretschmann configuration that has previously been dominated by gold films. Electron-beam physical vapor deposition (EBPVD)-prepared Al films oxidize in air to form a nanofilm of Al 2 O 3, yielding robust stability for sensing applications in buffered solutions. FDTD simulations revealed a sharp plasmonic dip in the visible range that enables measurement of both angular shift and reflection intensity change at a fixed angle. Bulk and surface tests indicated that Al films exhibited superb sensitivity performance in both categories. Compared to Au, the Al/Al 2 O 3 layer showed a marked effect of suppressing nonspecific binding from proteins in human serum. Further characterization indicated that Al film demonstrated a higher sensitivity and a wider working range than Au films when used for SPR imaging analysis. Combined with its economic and manufacturing benefits, the Al thin-film has the potential to become a highly advantageous plasmonic substrate to meet a wide range of biosensing needs in SPR configurations.

Elucidating the structures and stabilities of proteins and their complexes is paramount to understanding their biological functions in cellular processes. Native mass spectrometry (MS) coupled with ion mobility spectrometry (IMS) is emerging as an important biophysical technique owing to its high sensitivity, rapid analysis time, and ability to interrogate sample complexity or heterogeneity and the ability to probe protein structure dynamics. Here, a commercial IMS-MS platform has been modified for static native ESI emitters and an extended mass-to-charge range (20 kDa m / z ) and its performance capabilities and limits were explored for a range of protein and protein complexes. The results show new potential for this instrument platform for studies of large protein and protein complexes and provides a roadmap for extending the performance metrics for studies of even larger, more complex systems, namely, membrane protein complexes and their interactions with ligands.

The interaction between a bioreceptor and its target is key in developing sensitive, specific and robust diagnostic devices. Suboptimal interbioreceptor distances and bioreceptor orientation on the sensor surface, resulting from uncontrolled deposition, impede biomolecular interactions and lead to a decreased biosensor performance. In this work, we studied and implemented a 3D DNA origami design, for the first time comprised of assay specifically tailored anchoring points for the nanostructuring of the bioreceptor layer on the surface of disc-shaped microparticles in the continuous microfluidic environment of the innovative EvalutionTM platform. This bioreceptor immobilization strategy resulted in the formation of a less densely packed surface with reduced steric hindrance and favoured upward orientation. This increased bioreceptor accessibility led to a 4-fold enhanced binding kinetics and a 6-fold increase in binding efficiency compared to a directly immobilized non-DNA origami reference system. Moreover, the DNA origami nanotailored biosensing concept outperformed traditional aptamer coupling with respect to limit of detection (11 × improved) and signal-to-noise ratio (2.5 × improved) in an aptamer-based sandwich bioassay. In conclusion, our results highlight the potential of these DNA origami nanotailored surfaces to improve biomolecular interactions at the sensing surface, thereby increasing the overall performance of biosensing devices. The combination of the intrinsic advantages of DNA origami together with a smart design enables bottom-up nanoscale engineering of the sensor surface, leading towards the next generation of improved diagnostic sensing devices.

Sensitive and specific quantification of protein biomarkers is important in medical diagnostics, academic research, and pharmaceutical development. However, multiple binding steps in conventional sandwich immunoassay protocols result in high assay hands-on-time and delayed results. This is particularly relevant for medical diagnostics, where assay turn-around-time can have an immense impact on patient outcomes. To address this limitation, we report the assembly of nanosensors prepared using DNA-antibody conjugates, which combine capture and detection antibody binding steps by facilitating rapid antigen capture. Following antigen binding, detection antibodies are released using chemically induced complex rearrangement. A panel of 12 chemical additives are characterized to identify melting point depressants capable of rapidly denaturing double stranded DNA (dsDNA) linkers, and 8 compounds are demonstrated to be capable of disrupting dsDNA while maintaining the integrity of protein binding. This technique is then validated for the measurement of the heart attack indicator cardiac troponin I and is shown to successfully combine antigen binding steps while also increasing detection sensitivity 42×. Linker-mediated immunoassays are also demonstrated to provide robust quantification in human serum and are shown to be compatible with each of the most commonly used immunoassay detection modalities.

The use of submicrometer capillaries for nanoelectrospray ionization of native proteins and protein complexes effectively reduces the number of nonspecific salt adducts to biological molecules, therefore increasing the apparent resolution of a mass spectrometer without any further instrument modifications or increased ion activation. However, the increased interaction between proteins and the surface of the capillary has been shown to promote protein expansion and therefore loss of native structure. Here, we compare the effect of micrometer and submicrometer sized capillaries on the native structures of the protein complexes streptavidin, concanavalin A, and C-reactive protein under charge reducing conditions. We observe that the use of submicrometer capillaries did not result in a significantly higher charge state distribution, indicative of expansion, when compared to micrometer sized capillaries for complexes in 100 mM ammonium acetate and 100 mM triethylammonium acetate and for streptavidin in 200 mM ammonium acetate with no charge reduction. Additionally, no significant differences in collision cross sections were observed using ion mobility mass spectrometry. Finally, the dissociation behaviors of protein complexes ionized using micrometer and submicrometer capillaries were compared to determine if any structural perturbation occurred during ionization. Protein complexes from both capillary sizes displayed similar surface-induced dissociation patterns at similar activation energies. The results suggest that submicrometer capillaries do not result in significant changes to protein complex structure under charge reducing conditions and may be used for native mass spectrometry experiments. Submicrometer capillaries can be used to resolve small mass differences of biological systems on a QTOF platform; however, a laser tip puller is required for pulling reproducible submicrometer capillaries, and disruption in spray due to clogging was observed for larger protein complexes.

Development of a simple, fast, cost-efficient and sensitive approach for accurate protein analysis is of high significance due to its potential application in disease diagnosis and biomedicine research. Thus, we established a label-free fluorescence DNA walker for streptavidin detection based on terminal protection and dual enzyme assisted cleavage induced G-quadruplex/berberine conformation. In this paper, the swing arm probe and report probe were pre-assembled on gold nanoparticles. With the addition of a target, through the high-efficiency affinity between streptavidin and biotin in order to prevent the hydrolysis of exonuclease I, the swing arm probe which contains 8-17 DNAzyme cannot be destroyed and plays a role in the catalytic cleavage of the report probe, and the liberating fragment of the report probe which contains a specific sequence (5'-(TTAGGG)4) of G-quadruplex units can combine with berberine and shows an evident fluorescence signal enhancement. Our method, a sensitive and selective method of protein detection, achieves a 20 pM detection limit toward streptavidin. This developed DNA walker, which combines terminal protection and a dual enzyme assisted strategy, provides a prospective channel for streptavidin detection and should also be used for the design of biosensors in bio-detection and disease diagnosis.

In nearly all biosensors, sensitivity is greatly reduced for measurements conducted in biological matrices due to nonspecific binding from off-target molecules. One method to overcome this issue is to design a sensor that enables selective size-based uptake of proteins. Herein, a protein-polymer conjugate thin-film biosensor is fabricated that self-assembles into lamellae containing alternating domains of protein and polymer. Analyte is captured in protein regions while polymer domains restrict diffusion of large molecules. Device sensitivity and size-based exclusion properties are probed using two analytes: streptavidin (SA, 52.8 kDa) and monomeric streptavidin (mSA2, 15.6 kDa). Tuning domain spacing by adjusting polymer molecular weight allows the design of films that relatively freely uptake mSA2 and largely restrict SA diffusion. Furthermore, when detecting the smaller mSA2, no reduction in the limit of detection (LOD) is observed when transitioning from detection in the buffer to detection in biological fluids. As a result, LOD measured in fluid samples is reduced by 2 orders of magnitude compared to a traditional surface-immobilized protein monolayer.

Noncovalent interactions between biomolecules are critical to their activity. Native mass spectrometry (MS) has enabled characterization of these interactions by preserving noncovalent assemblies for mass analysis, including protein-ligand and protein-protein complexes for a wide range of soluble and membrane proteins. Recent advances in native MS of lipoprotein nanodiscs have also allowed characterization of antimicrobial peptides and membrane proteins embedded in intact lipid bilayers. However, conventional native electrospray ionization (ESI) can disrupt labile interactions. To stabilize macromolecular complexes for native MS, charge reducing reagents can be added to the solution prior to ESI, such as triethylamine, trimethylamine oxide, and imidazole. Lowering the charge acquired during ESI reduces Coulombic repulsion that leads to dissociation, and charge reduction reagents may also lower the internal energy of the ions through evaporative cooling. Here, we tested a range of imidazole derivatives to discover improved charge reducing reagents and to determine how their chemical properties influence charge reduction efficacy. We measured their effects on a soluble protein complex, a membrane protein complex in detergent, and lipoprotein nanodiscs with and without embedded peptides, and used computational chemistry to understand the observed charge-reduction behavior. Together, our data revealed that hydrophobic substituents at the 2 position on imidazole can significantly improve both charge reduction and gas-phase stability over existing reagents. These new imidazole derivatives will be immediately beneficial for a range of native MS applications and provide chemical principles to guide development of novel charge reducing reagents.

Thermoresponsive core-corona type nanoparticles were prepared exhibiting biomolecule recognition ability on their surfaces. These thermoresponsive nanoparticles were prepared from a poly(N-isopropylacrylamide) (PNIPAAm) macro-initiator and styrene (St) in a polar solvent via atom transfer radical dispersion polymerization. The PNIPAAm macro-initiator contains an alkyl halide and/or phthalimide group on the terminated group of the polymer chain, and thus, the grafting of PNIPAAm on the PSt core resulted in terminating phthalimide end groups. These terminal groups were utilized to immobilize biomolecule recognition units, and the dispersion stabilities of the nanoparticles were found to change in aqueous solution at room temperature due to alteration of the terminating PNIPAAm groups by the presence of biomolecules at different concentrations., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Mode volume overlap factor is one of the parameters determining the sensitivity of a sensor. In past decades, many approaches have been proposed to increase the mode volume overlap. As the increased mode volume overlap factor results in reduced mode confinement, the maximum value is ultimately determined by the micro- and nano-structure of the refractive index distribution of the sensing devices. Due to the asymmetric index profile along the vertical direction on silicon-on-insulator platform, further increasing the sensitivity of subwavelength grating metamaterial (SGM) waveguide based sensors is challenging. In this paper, we propose and demonstrate pedestaled SGM which reduces the asymmetricity and thus allows further increasing the interaction between optical field and analytes. The pedestal structure can be readily formed by a controlled undercut etching. Both theoretical analysis and experimental demonstration show a significant improvement of sensitivity. The bulk sensitivity and surface sensitivity are improved by 28.8% and 1000 times, respectively. The detection of streptavidin at a low concentration of 0.1 ng/mL (∼1.67 pM) is also demonstrated through real-time monitoring of the resonance shift. A ∼400 fM streptavidin limit of detection is expected with a 0.01nm resolution spectrum analyzer based on the real-time measurement of streptavidin detection results from two-site binding model fitting., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Silicon nanowire (Si NW) sensors have attracted great attention due to their ability to provide fast, low-cost, label-free, real-time detection of chemical and biological species. Usually configured as field effect transistors (FETs), they have already demonstrated remarkable sensitivity with high selectivity (through appropriate functionalisation) towards a large number of analytes in both liquid and gas phases. Despite these excellent results, Si NW FET sensors have not yet been successfully employed to detect single molecules of either a chemical or biological target species. Here we show that sensors based on silicon junctionless nanowire transistors (JNTs), the simplest possible transistors, are capable of detecting the protein streptavidin at a concentration as low as 580 zM closely approaching the single molecule level. This ultrahigh detection sensitivity is due to the intrinsic advantages of junctionless devices over conventional FETs. Apart from their superior functionality, JNTs are much easier to fabricate by standard microelectronic processes than transistors containing p-n junctions. The ability of JNT sensors to detect ultra-low concentrations (in the zeptomolar range) of target species, and their potential for low-cost mass production, will permit their deployment in numerous environments, including life sciences, biotechnology, medicine, pharmacology, product safety, environmental monitoring and security.

For an assay to be most effective in point-of-care clinical analysis, it needs to be economical, simple, generalizable, and free from tedious workflows. While electrochemistry-based DNA sensors reduce instrumental costs and eliminate complicated procedures, there remains a need to address probe costs and generalizability, as numerous probes with multiple conjugations are needed to quantify a wide range of biomarkers. In this work, we have opened a route to circumvent complicated multiconjugation schemes using enzyme-catalyzed probe construction directly on the surface of the electrode. With this, we have created a versatile DNA nanostructure probe and validated its effectiveness by quantification of proteins (streptavidin, anti-digoxigenin, anti-tacrolimus) and small molecules (biotin, digoxigenin, tacrolimus) using the same platform. Tacrolimus, a widely prescribed immunosuppressant drug for organ transplant patients, was directly quantified with electrochemistry for the first time, with the assay range matching the therapeutic index range. Finally, the stability and sensitivity of the probe was confirmed in a background of minimally diluted human serum.

Plasmonic gold nanoparticles can be an efficient source of hot electrons that can transfer to adsorbed molecules for photochemistry, followed by broadening of the homogeneous localized surface plasmon resonance (LSPR) linewidth. Although chemical interface damping (CID) is one of the main decay processes, it is the most poorly understood damping mechanism in gold nanoparticles. Herein, to better understand CID and to find new functional groups that can induce CID as an alternative to thiol groups (-SH, sulfhydryl groups), we carried out scanning electron microscopy (SEM) correlated dark-field (DF) scattering studies of gold nanorods (AuNRs) at the single-particle level. We found that biotin with sulfur can lead to strong plasmon damping in single AuNRs. We chose biotin in this study because it is widely used as a linker that can selectively bind to streptavidin in many biological sensing experiments. We further demonstrated the possibility of real-time detection of biological molecules, specifically biotinylated BSA proteins, by means of CID in single AuNRs. Therefore, this study allows us to gain a deeper insight into how adsorbate molecules with sulfur affect CID, which is an important step toward developing a CID-based LSPR biosensor to detect real biological molecules having sulfur or thiol groups without interference from the medium dielectric constant in single AuNRs.

The detection limits of impedance biosensors are dictated by the presence of background nonspecific binding, yet almost all the detection limits reported in the literature are determined using a clean buffer solution without confronting this real challenge. In this work, the authors employed the simplest "differential" impedance biosensor, composed of poly-l-lysine-polyethylene glycol-biotin-coated gold electrodes for the detection of streptavidin in the presence of 0.1% fetal calf serum, and studied the effect of the nonspecific binding on the performance of the differential impedance biosensing. The lowest streptavidin concentration detected by the system (5 μg/ml) was 1 order of magnitude higher (worse) than that from a previously demonstrated impedance biosensor where avidin was detected in the absence of background proteins. Interestingly, the origin of the differential signal was not due to the electrochemical properties of streptavidin itself but was that of the serum, where the coverage of the electrode by streptavidin indirectly modulated the electrical signal by suppressing the accessibility of the serum to the electrode.

The sensitive detection of proteins is a key objective in many areas of biomolecular science, ranging from biophysics to diagnostics. However, sensing in complex biological fluids is hindered by nonspecific interactions with off-target species. Here, we describe and demonstrate an assay that utilizes both the chemical and physical properties of the target species to achieve high selectivity in a manner not possible by chemical complementarity alone, in complex media. We achieve this objective through a combinatorial strategy, by simultaneously exploiting free-flow electrophoresis for target selection, on the basis of electrophoretic mobility, and conventional affinity-based selection. In addition, we demonstrate amplification of the resultant signal by a catalytic DNA nanocircuit. This approach brings together the inherent solution-phase advantages of microfluidic sample handling with isothermal, enzyme-free signal amplification. With this method, no surface immobilization or washing steps are required, and our assay is well suited to monoepitopic targets, presenting advantages over conventional ELISA techniques.

Background: Magnetic bead immunocapture-LC-MS has been widely used for bioanalysis of biotherapeutic proteins. However, magnetic beads are difficult to be fully automated and more costly than ELISA plates., Aim: Develop an ELISA-LC-MS hybrid assay as an alternate platform., Results: Among seven ELISA plates tested, Pierce streptavidin plates, which did not require time-consuming capture antibody precoating steps, provided the best sensitivity and assay dynamic range (5-2500 ng/ml or 10-5000 ng/ml), similar to magnetic bead immunocapture-LC-MS assay and better than an ELISA (50-500 ng/ml). The entire procedures could be fully automated using a liquid handling system., Conclusion: This study demonstrates that ELISA-LC-MS hybrid approach using streptavidin plates represents a promising platform for bioanalysis of biotherapeutics.

Modulation of support wettability used for microarray format biosensing has led to an improvement of results. Hydrophobicity of glass chips was set by derivatizing with single vinyl organosilanes of different chain length and silane mixtures. Thiol-ene photochemical linking has been used as effective chemistry for covalent anchoring of thiolated probes. Lowest unspecific binding and highest signal intensity and SNR were obtained with large hydrocarbon chain (C 22 ) silanes or a shorter one (C 10 ) containing fluorine atoms. SNR resulting values are improved, reaching levels higher than 1500 in some cases, when using vinyl silanes modified with 1% C 10 alkyl fluorinated one, because mild hydrophobicity was achieved (water contact angle ca. 110°) for all silanes, including the short C 2 and C 3 , thus giving rise to smaller and better defined array spots. In addition, unspecific binding of reagents and targets was totally withdrawn. Hence, good-performing surfaces for biosensing applications can be built using appropriate organosilane reagent selection, including fluorinated ones. Graphical abstract ᅟ.

We report on a 47 year old male patient with multiple sclerosis (MS) presenting in our outpatient neurology clinic in Frankfurt/Main for therapy evaluation. Before change of treatment laboratory investigations were performed. Thyroid function tests (TFTs) with a streptavidin/biotin based immunoassay revealed severe hyperthyroidism with positive thyroid autoantibodies suggestive for Graves' disease. Clinical presentation and thyroid sonography were unremarkable. Due to the discordance between clinical presentation and TFTs, we repeated medical history, in which the patient reported taking high-doses of biotin (300 mg/day) for MS. Recent studies with patients suffering from primary and secondary progressive MS, indicated promising effects of high-dose biotin on MS-related disability. In immunoassays relaying on streptavidin-biotin interaction, biotin intake can cause falsely high or low results. Two weeks after withdrawing biotin, biotin/streptavidin dependant assays showed no longer the biochemical picture of severe hyperthyroidism. Biotin intake should be paused for at least two to five days prior to the use of biotin/streptavidin dependant assays. Alternatively, non-biotin/streptavidin dependant assays (radioimmunoassay, gas chromatography-mass spectrometry/liquid chromatography-mass spectrometry) may be used., (Copyright © 2018. Published by Elsevier B.V.)

Herein, a general protein conversion and analysis strategy was developed for homogeneous, label-free, and sensitive protein detection, on the basis of the affinity binding-induced Hg 2+ release for protein conversion, and the succeeding Hg 2+ doping-induced ZnSe quantum dot (QD) photoluminescence for signal readout. Two DNA motifs were designed, each of which was conjugated with a protein-specific recognition ligand. The mercury ions were initially introduced into one DNA motif by T-Hg 2+ -T interaction. The Hg 2+ releasing was then accomplished after protein recognition-initiated strand exchange reaction between two DNA motifs. Then, the simultaneous incorporation of the released Hg 2+ into ZnSe QD resulted in a doping-dependent fluorescence emission at 560 nm correlated with protein analysis. The protein assay is outperformed only by a simple one-step mixing operation but no separation or washing steps. Also, the use of doped QD as a fluorogenic reporter can avoid the fluorophore and/or quencher labeling, and eliminate complex DNA manipulation procedures for signal readout or amplification involved in most existing nucleic acid-based protein conversion and analysis methods. The versatile and sensitive detection toward multivalent proteins was verified with the detection limits achieved at 0.034 nM for anti-Dig antibody, 0.012 nM for streptavidin, and 0.025 nM for thrombin. Thus, it shows great promise for protein analysis to accommodate the applications in disease diagnosis, biomarker screening, and clinical medicine.

In this study, two kinds of sensitive biosensors based on a multipedal DNA walker along a three-dimensional DNA functional magnet particles track for the chemiluminescent detection of streptavidin (SA) are constructed and compared. In the presence of SA, a multipedal DNA walker was constructed by a biotin-modified catalyst as a result of the terminal protection to avoid being digested by exonuclease I. Then, through a toehold-mediated strand exchange, a "leg" of a multipedal DNA walker interacted with a toehold of a catalyzed hairpin assembly (CHA)-H1 coupled with magnetic microparticles (MMPs) and opened its hairpin structure. The newly open stem in CHA-H1 was hybridized with a toehold of biotin-labeled H2. Via the strand displacement process, H2 displaced one "leg" of a multipedal DNA walker, and the other "leg" continued to interact with the neighboring H1 to initiate the next cycle. In order to solve the high background caused by the hybridization between CHA-H1 and H2 without a CHA-catalyst, the other model was designed. The principle of the other model (isothermal strand-displacement polymerase reaction (ISDPR)-DNA walker) was similar to that of the above one. After the terminal protection of SA, a "leg" of a multipedal DNA walker was triggered to open the hairpin of the ISDPR-H1 conjugated with MMPs. Then, the biotin-modified primer hybridized with the newly exposed DNA segment, triggering the polymerization reaction with the assistance of dNTPs/polymerase. As for the extension of the primer, the "leg" of a multipedal DNA walker was displaced so that the other "leg" could trigger the proximal H1 to go onto the next cycle. Due to its lower background and stronger signal, a multipedal DNA walker based on an ISDPR had a lower limit of detection for SA. The limit of detection for SA was 6.5 pM, and for expanding the application of the method, the detections of the folate receptor and thrombin were explored. In addition, these DNA walker methods were applied in complex samples successfully.

An intensified process was developed that enables high level production of recombinant core streptavidin (cSAV), a non-glycosylated tetrameric protein utilised in a wide range of applications. A pH-stat fed-batch feeding strategy was employed to achieve high-cell-density and improve volumetric yield of cSAV which was expressed as inclusion bodies (IBs). The effect of induction at different cell densities (OD 20, 60 and 100) on volumetric and specific yield were then studied. Highest volumetric yield of cSAV (1550 mg L -1 ) was obtained from induction at OD 100 without significant reductions in specific yield. To recover active cSAV from IBs, the possibility of refolding using a temperature-based refolding method was investigated. Refolded cSAV obtained from temperature-based refolding were then compared against cSAV refolded with conventional dialysis and dilution methods using quantitative and qualitative metrics. The temperature-based refolding method was found to improve the yield of cSAV by 6-18% in comparison to conventional methods without compromising quality. Intensification was achieved by reductions in process volumes and a more concentrated product stream. Using the newly developed process, the volumetric yield of cSAV IBs was improved by thirty-six fold in comparison to low-cell-density shake flask cultivation, and 33% of cSAV can be recovered from IBs at 90% purity., (Copyright © 2018 Elsevier B.V. All rights reserved.)

We describe here a flow platform for quantifying the number of biomolecules on individual fluorescent nanoparticles. The platform combines line-confocal fluorescence detection with near nanoscale channels (1-2 μm in width and height) to achieve high single-molecule detection sensitivity and throughput. The number of biomolecules present on each nanoparticle was determined by deconvolving the fluorescence intensity distribution of single-nanoparticle-biomolecule complexes with the intensity distribution of single biomolecules. We demonstrate this approach by quantifying the number of streptavidins on individual semiconducting polymer dots (Pdots); streptavidin was rendered fluorescent using biotin-Alexa647. This flow platform has high-throughput (hundreds to thousands of nanoparticles detected per second) and requires minute amounts of sample (∼5 μL at a dilute concentration of 10 pM). This measurement method is an additional tool for characterizing synthetic or biological nanoparticles.

In this study, a photoresist template with well-defined contact hole array was fabricated, to which radio frequency magnetron sputtering process was then applied to deposit an alloyed Zr 55 Cu 30 Al 10 Ni 5 target, and finally resulted in ordered metallic glass nanotube (MGNT) arrays after removal of the photoresist template. The thickness of the MGNT walls increased from 98 to 126nm upon increasing the deposition time from 225 to 675s. The wall thickness of the MGNT arrays also increased while the dimensions of MGNT reduced under the same deposition condition. The MGNT could be filled with biomacromolecules to change the effective refractive index. The air fraction of the medium layer were evaluated through static water contact angle measurements and, thereby, the effective refractive indices the transverse magnetic (TM) and transverse electric (TE) polarized modes were calculated. A standard biotin-streptavidin affinity model was tested using the MGNT arrays and the fundamental response of the system was investigated. Results show that filling the MGNT with streptavidin altered the effective refractive index of the layer, the angle of reflectance and color changes identified by an L*a*b* color space and color circle on an a*b* chromaticity diagram. The limit of detection (LOD) of the MGNT arrays for detection of streptavidin was estimated as 25nM, with a detection time of 10min. Thus, the MGNT arrays may be used as a versatile platform for high-sensitive label-free optical biosensing., (Copyright © 2017 Elsevier B.V. All rights reserved.)

A new modular nanoswitch was described for versatile, rapid (within 1 h), homogeneous, and sensitive protein detection. The system employs two hairpins (HP1 and HP2) that can be reciprocally recognized through the apical loop-loop interaction. HP2 possesses a conformation-switching stem-loop structure, with appended single-stranded tails on each end, which can hybridize with the recognition-element-conjugated DNA strands to construct a protein-responsive HP2 scaffold. It works according to a simple mix-and-detect assay format, with the first formation of a kissing complex between HP1 and HP2 scaffolds for fluorescence quenching, and then cascade propagation from steric strain through protein binding to the dissociation of the kissing complex for fluorescence recovery. The detection universality of such a modular nanoswitch was demonstrated by using three multivalent proteins, including anti-digoxigenin (Anti-Dig) antibody, streptavidin, and thrombin, with detection limits of 0.33, 0.17, and 0.5 nm, respectively., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A plasmonic sensing system that allows the excitation of localized surface plasmon resonance (LSPR) by individual waveguide modes is presented conceptually and experimentally. Any change in the local environment of the gold nanoparticles (AuNPs) alters the degree of coupling between LSPR and a polymer slab waveguide, which then modulates the transmission-output signal. In comparison to conventional LSPR sensors, this system is less susceptible to optical noise and positional variation of signals. Moreover, it enables more freedom in the exploitation of plasmonic hot spots with both transverse electric (TE) and transverse magnetic (TM) modes. Through real-time measurement, it is demonstrated that the current sensing system is more sensitive than comparable optical fiber plasmonic sensors. The highest normalized bulk sensitivity (7.744 RIU -1 ) is found in the TM 1 mode. Biosensing with the biotin-streptavidin system shows that the detection limit is on the order of 10 -14 M of streptavidin. With further optimization, this sensing system can easily be mass-produced and incorporated into high throughput screening devices, detecting a variety of chemical and biological analytes via immobilization of the appropriate recognition sites.

Nondestructive label-free bioanalytics of microliter to nanoliter sample volumes with low analyte concentrations requires novel analytic approaches. For this purpose, we present an optofluidic platform that combines surface-enhanced in situ infrared spectroscopy with microfluidics for sensing of surface-immobilized ultrathin biomolecular films in liquid analytes. Submonolayer sensitivity down to surface densities of few ng/cm 2 is demonstrated for the adsorption of the thiolate tripeptide glutathione and for the recognition of streptavidin on a biotinylated enhancement substrate. Nonfunctionalized and functionalized metal island films on planar oxidized silicon substrates are used for signal enhancement with quantifiable enhancement properties. A single-reflection geometry at an incidence angle below the attenuated-total-reflection (ATR) regime is used with ordinary planar, IR-transparent windows. The geometry circumvents the strong IR absorption of common polymer materials and of aqueous environments in the IR fingerprint region. This practice enables straightforward quantitative analyses of, e.g., adsorption kinetics as well as chemical and structural properties in dependence of external stimuli.

We report here the concept of a self-powered, target-triggered DNA motor constructed by engineering a DNAzyme to adapt into binding-induced DNA assembly. An affinity ligand was attached to the DNAzyme motor via a DNA spacer, and a second affinity ligand was conjugated to the gold nanoparticle (AuNP) that was also decorated with hundreds of substrate strands serving as a high-density, three-dimensional track for the DNAzyme motor. Binding of a target molecule to the two ligands induced hybridization between the DNAzyme and its substrate on the AuNP, which are otherwise unable to spontaneously hybridize. The hybridization of DNAzyme with the substrate initiates the cleavage of the substrate and the autonomous movement of the DNAzyme along the AuNP. Each moving step restores the fluorescence of a dye molecule, enabling monitoring of the operation of the DNAzyme motor in real time. A simple addition or depletion of the cofactor Mg 2+ allows for fine control of the DNAzyme motor. The motor can translate a single binding event into cleavage of hundreds of substrates, enabling amplified detection of proteins at room temperature without the need for separation.

Protein detection and quantification play critical roles in both basic research and clinical practice. Current detection platforms range from the widely used ELISA to more sophisticated, and more expensive, approaches such as digital ELISA. Despite advances, there remains a need for a method that combines the simplicity and cost-effectiveness of ELISA with the sensitivity and speed of modern approaches in a format suitable for both laboratory and rapid, point-of-care applications. Building on recent developments in DNA structural nanotechnology, we introduce the nanoswitch-linked immunosorbent assay (NLISA), a detection platform based on easily constructed DNA nanodevices that change conformation upon binding to a target protein with the results read out by gel electrophoresis. NLISA is surface-free and includes a kinetic-proofreading step for purification, enabling both enhanced sensitivity and reduced cross-reactivity. We demonstrate femtomolar-level detection of prostate-specific antigen in biological fluids, as well as reduced cross-reactivity between different serotypes of dengue and also between a single-mutation and wild-type protein. NLISA is less expensive, uses less sample volume, is more rapid, and, with no washes, includes fewer hands-on steps than ELISA, while also achieving superior sensitivity. Our approach also has the potential to enable rapid point-of-care assays, as we demonstrate by performing NLISA with an iPad/iPhone camera for imaging., Competing Interests: Conflict of interest statement: Patent applications have been filed for various aspects of this work by all authors. M.A.K. and W.P.W. are founders of and have equity interest in Confer Health, Inc., a company that is developing point-of-care diagnostics.

DrrC is a DNA-binding protein of Streptomyces peucetius that provides self-resistance against daunorubicin, the antibiotic produced by the organism. DrrC was expressed in E.coli and purified by using N-terminal MBP-tag which retained DNA-binding property in spite of the tag. Mobility shift assay confirmed the interaction of 313bp DNA that has the dnrI promoter, daunorubicin and MBP-DrrC in the presence of ATP. Biotinylated and immobilized 313bp DNA was intercalated with daunorubicin to observe the release of the drug when MBP-DrrC is allowed to act on the DNA. The release of daunorubicin was recorded by absorption and fluorescence spectroscopy. The experiments proved that daunorubicin was released from DNA in the presence of MBP-DrrC. Fluorescence emission of daunorubicin had a maximum peak at 591nm. However, emission spectrum of released daunorubicin showed hypochromism with a maximum peak at 584nm that is possibly because it is in complex with MBP-DrrC. We propose that DrrC naturally binds at intercalated sites to eject daunorubicin; in the process both drug and protein are dislodged from DNA. Like UvrA, DrrC possibly scans the DNA for intercalated daunorubicin. When it encounters daunorubicin, DrrC dislodges it, thereby allowing DNA replication and transcription to go on unhindered. Thus a novel self resistance mechanism by DNA repair is mediated by DrrC., (Copyright © 2017 Elsevier GmbH. All rights reserved.)

The effects of charge state on structures of native-like cations of serum albumin, streptavidin, avidin, and alcohol dehydrogenase were probed using cation-to-anion proton-transfer reactions (CAPTR), ion mobility, mass spectrometry, and complementary energy-dependent experiments. The CAPTR products all have collision cross-section (Ω) values that are within 5.5% of the original precursor cations. The first CAPTR event for each precursor yields products that have smaller Ω values and frequently exhibit the greatest magnitude of change in Ω resulting from a single CAPTR event. To investigate how the structures of the precursors affect the structures of the products, ions were activated as a function of energy prior to CAPTR. In each case, the Ω values of the activated precursors increase with increasing energy, but the Ω values of the CAPTR products are smaller than the activated precursors. To investigate the stabilities of the CAPTR products, the products were activated immediately prior to ion mobility. These results show that additional structures with smaller or larger Ω values can be populated and that the structures and stabilities of these ions depend most strongly on the identity of the protein and the charge state of the product, rather than the charge state of the precursor or the number of CAPTR events. Together, these results indicate that the excess charges initially present on native-like ions have a modest, but sometimes statistically significant, effect on their Ω values. Therefore, potential contributions from charge state should be considered when using experimental Ω values to elucidate structures in solution.

This work proposed a homogenous fluorescence assay for proteins, based on the target-triggered proximity DNA hybridization in combination with strand displacement amplification (SDA). It benefited from target-triggered proximity DNA hybridization to specifically recognize the target and SDA making recycling signal amplification. The system included a molecular beacon (MB), an extended probe (EP), and an assistant probe (AP), which were not self-assembly in the absence of target proteins, due to the short length of the designed complementary sequence among MB, EP, and AP. Upon addition of the target proteins, EP and AP are bound to the target proteins, which induced the occurrence of proximity hybridization between MB, EP, and AP and followed by strand displacement amplification. Through the primer extension, a tripartite complex of probes and target was displaced and recycled to hybridize with another MB, and the more opened MB enabled the detection signal to amplify. Under optimum conditions, it was used for the detection of streptavidin and thrombin. Fluorescence intensity was proportional to the concentration of streptavidin and thrombin in the range of 0.2-30 and 0.2-35 nmol/L, respectively. Furthermore, this fluorescent method has a good selectivity, in which the fluorescence intensity of thrombin was ~37-fold or even larger than that of the other proteins at the same concentration. It is a new and simple method for SDA-involved target protein detection and possesses a great potential for other protein detection in the future. Graphical abstract A homogenous assay for protein detection is based on proximity DNA hybridization and strand displacement amplification reaction.

We present a multi-sensor chip comprising an array of whispering-gallery mode (WGM) micro-goblet lasers integrated into a digital microfluidic (DMF) system. In contrast to earlier demonstrations, the lasers are fabricated from dye-doped poly-methyl methacrylate (PMMA) at low cost using spin-coating, mask-based optical lithography, wet chemical etching, and thermal reflow techniques. Pumping and read-out of the devices is accomplished via simple free-space optics, thereby allowing large-scale sensor arrays to be addressed. We demonstrate the viability of the system by bulk refractive index-sensing and by measuring the specific binding of streptavidin to a biotinylated sensor surface. This is the first time that optical cavities are used for label-free detection of biomolecules in a DMF system. This approach can be extended to a versatile detector platform that targets a wide range of clinically relevant biomolecules.

In this work, we succeeded in establishing a new method for proteins and small molecules analysis based on the small molecule-linked DNA and nucleic acid hyperbranched rolling circle amplification (HRCA). Small molecule linked DNA by chemical modification was used as a flexible tool to study protein-small molecule interactions. The HRCA reaction which would produce signal amplification was regulated by the steric effect depending on whether the target proteins were present. In the implement of the proposed strategy, streptavidin (SA)-biotin and anti-digoxin antibody (anti-Dig)-digoxin were chosen as two model partners. Experimental results showed that the quantitative detection of SA and anti-Dig was realized both with nanomolar detection limits. The small molecules biotin and digoxin were also detected at nanomolar levels in a wide range of 1nM~100µM and 1nM~10µM, respectively. Meanwhile, the results indicated that the method had a favorable specificity in analyzing proteins or small molecules. Thus, it may be expected to quantitatively analyze some protein markers and small molecular drugs in complex biological samples., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Biosensing based on nanophotonic structures has shown a great potential for cost-efficient, high-speed and compact personal medical diagnostics. While plasmonic nanosensors offer high sensitivity, their intrinsically restricted resonance quality factors and strong heating due to metal absorption impose severe limitations on real life applications. Here, we demonstrate an all-dielectric sensing platform based on silicon nanodisks with strong optically-induced magnetic resonances, which are able to detect a concentration of streptavidin of as low as 10 -10 M (mol L -1 ) or 5 ng mL -1 , thus pushing the current detection limit by at least two orders of magnitudes. Our study suggests a new direction in biosensing based on bio-compatible, non-toxic, robust and low-loss dielectric nanoresonators with potential applications in medicine, including disease diagnosis and drug detection.

Label-free detection, analysis, and rapid tracking of nanoparticles is crucial for future ultrasensitive sensing applications, ranging from understanding of biological interactions to the study of size-dependent classical-quantum transitions. Yet optical techniques to distinguish nanoparticles directly among their background remain challenging. Here we present amplified interferometric scattering microscopy (a-iSCAT) as a new all-optical method capable of detecting individual nanoparticles as small as 15 kDa proteins that is equivalent to half a GFP. By balancing scattering and reflection amplitudes the interference contrast of the nanoparticle signal is amplified 1 to 2 orders of magnitude. Beyond high sensitivity, a-iSCAT allows high-speed image acquisition exceeding several hundreds of frames-per-second. We showcase the performance of our approach by detecting single Streptavidin binding events and by tracking single Ferritin proteins at 400 frames-per-second with 12 nm localization precision over seconds. Moreover, due to its extremely simple experimental realization, this advancement finally enables a cheap and routine implementation of label-free all-optical single nanoparticle detection platforms with sensitivity operating at the single protein level.

Mass spectrometry continues to develop as a valuable tool in the analysis of proteins and protein complexes. In protein complex mass spectrometry studies, surface-induced dissociation (SID) has been successfully applied in quadrupole time-of-flight (Q-TOF) instruments. SID provides structural information on noncovalent protein complexes that is complementary to other techniques. However, the mass resolution of Q-TOF instruments can limit the information that can be obtained for protein complexes by SID. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) provides ultrahigh resolution and ultrahigh mass accuracy measurements. In this study, an SID device was designed and successfully installed in a hybrid FT-ICR instrument in place of the standard gas collision cell. The SID-FT-ICR platform has been tested with several protein complex systems (homooligomers, a heterooligomer, and a protein-ligand complex, ranging from 53 to 85 kDa), and the results are consistent with data previously acquired on Q-TOF platforms, matching predictions from known protein interface information. SID fragments with the same m/z but different charge states are well-resolved based on distinct spacing between adjacent isotope peaks, and the addition of metal cations and ligands can also be isotopically resolved with the ultrahigh mass resolution available in FT-ICR.

In this manuscript we propose a simple and efficient strategy to improve the sensitivity of localized surface plasmon resonance (LSPR) shift-based biosensors using biotin-streptavidin recognition interaction as a proof-of-concept. Specifically, biotin molecules are immobilized on a low-cost plasmonic LSPR biosensor based on annealed self-assembled spherical gold nanoparticles (AuNSs) and successively incubated with increasing concentrations of streptavidin, achieving a limit of detection (LOD) of 5nM. Interestingly, when the detection is performed by the same biotin-functionalized plasmonic AuNSs substrate but against streptavidin previously conjugated to gold nanorods, the LSPR shift is 26-fold enhanced. Moreover, we confirm these results through numerical simulations and demonstrate that the proposed sensing architecture can operate as transducer not only to confirm the adsorption of bioanalyte but also to provide the chemical identity of the capture and targeted molecules from their vibrational Raman fingerprints. Therefore, we are confident that the development of such plasmonic biosensors that use metallic labels for improving the sensitivity of detection could become highly promising for future point-of-care diagnostic assays, pushing sensitivity towards single-molecule detection limit., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Simple optical techniques that can accurately and selectively identify organic and inorganic material in a reproducible manner are of paramount importance in biological sensing applications. In this work, we demonstrate that a nanoimprinted plasmonic pattern with locked-in dimensions supports sharp deterministic hybrid resonances when coupled with an optical cavity suitable for high sensitive surface detection. The surface sensing property of this hybrid system is quantified by precise atomic layer growth of aluminum oxide using the atomic layer deposition technique. The analyte specific sensing ability is demonstrated in the detection of two dissimilar analytes, inorganic amine-coated iron oxide nanoparticles and organic streptavidin protein. Femto to nanomolar detection limits were achieved with the proposed coupled plasmonic system based on the versatile and robust soft nanoimprinting technique, which promises practical low cost biosensors.

A novel label-free turn-on fluorescence biosensor for the determination of streptavidin (SA) was proposed. Using terminal protection of small molecule-linked DNA chimeras, which can protect DNA from degradation by various exonucleases when the small molecule moieties are bound to their protein target, we designed a loop probe, where the 3'-end was modified with biotin to resist digestion by exonucleases in the presence of target SA. Coupled with an intercalating dye, SYBR Green I, strong enhancement of the fluorescence signals was obtained compared with that in the absence of SA. A linear correlation equation was obtained for SA from 0 to 200nM with a limit detection of 0.4nM. This strategy holds great promise for practical applications with good specificity and sensitivity., (Copyright © 2016 Elsevier B.V. All rights reserved.)

In this work, a versatile dumbbell molecular (DM) probe was designed and employed in the sensitively homogeneous bioassay. In the presence of target molecule, the DM probe was protected from the digestion of exonucleases. Subsequently, the protected DM probe specifically bound to the intercalation dye and resulted in obvious fluorescence signal which was used to determine the target molecule in return. This design allows specific and versatile detection of diverse targets with easy operation and no sophisticated fluorescence labeling. Integrating the idea of target-protecting DM probe with adenosine triphosphate (ATP) involved ligation reaction, the DM probe with 5'-end phosphorylation was successfully constructed for ATP detection, and the limitation of detection was found to be 4.8 pM. Thanks to its excellent selectivity and sensitivity, this sensing strategy was used to detect ATP spiked in human serum as well as cellular ATP. Moreover, the proposed strategy was also applied in the visual detection of ATP in droplet-based microfluidic platform with satisfactory results. Similarly, combining the principle of target-protecting DM probe with streptavidin (SA)-biotin interaction, the DM probe with 3'-end biotinylation was developed for selective and sensitive SA determination, which demonstrated the robustness and versatility of this design., (Copyright © 2016 Elsevier B.V. All rights reserved.)

We present a simple and inexpensive method for label-free detection of biomolecules. The method monitors the changes in streaming current in a fused silica capillary as target biomolecules bind to immobilized receptors on the inner surface of the capillary. To validate the concept, we show detection and time response of different protein-ligand and protein-protein systems: biotin-avidin and biotin-streptavidin, barstar-dibarnase and Z domain-immunoglobulin G (IgG). We show that specific binding of these biomolecules can be reliably monitored using a very simple setup. Using sequential injections of various proteins at a diverse concentration range and as well as diluted human serum we further investigate the capacity of the proposed technique to perform specific target detection from a complex sample. We also investigate the time for the signal to reach equilibrium and its dependence on analyte concentration and demonstrate that the current setup can be used to detect biomolecules at a concentration as low as 100pM without requiring any advanced device fabrication procedures. Finally, an analytical model based on diffusion theory has been presented to explain the dependence of the saturation time on the analyte concentration and capillary dimensions and how reducing length and inner diameter of the capillary is predicted to give faster detection and in practice also lower limit of detection., (Copyright © 2016 Elsevier B.V. All rights reserved.)