Search

This study focused on detecting streptomycin (STR) residues using a luminescent aptasensor encapsulated with aptamer. Utilizing MOF-74-Co with peroxidase-like activity, luminol was enclosed in its pores. The specific STR aptamer acted as a gatekeeper, ensuring excellent performance. Upon exposure to STR, the aptamers detached, releasing luminol and amplifying the luminescent signal through MOF-74-Co catalytic activity. A linear relationship between fluorescence intensity and STR concentration (50 nM ∼ 5 × 10 6  nM) was established, with a limit of detection of 0.065 nM. The sensor exhibited high selectivity for STR even in the presence of other aminoglycoside antibiotics. Applied to tea, egg, and honey samples, the sensor showed recovery rates of 91.38-100.2%, meeting safety standards. This MOF-based aptasensor shows promise for detecting harmful residues., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Due to the high demand for honey, beekeepers often feed the bees with antibiotics to protect honeybees against illnesses; the determination of veterinary drugs and their residues in bee products especially in honey is gaining importance. In this study, commercially available 15 different brands, a total of 22 honey (14 blossoms and 8 pines) samples obtained from 5 chain supermarkets in the city of Bingöl and Diyarbakır, Turkey were analysed for 29 antibiotic residues. These antibiotics belong to 10 different categories, including tetracyclines, aminoglycosides, macrolides, sulfonamides, fluoroquinolones, benzimidazoles, anthelmintic, amphenicols, quinolines, and oxazolidines. For the qualitative and quantitative determination of the antibiotics, a triple quadrupole liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used. A total of 10 out of 22 honey (8 blossom, 57.14 % and 2 pine, 25 %) samples were found to be positive for antibiotics. Among the tested antibiotics, tetracycline, dihydrostreptomycin, streptomycin, erythromycin, and sulfadimidine were detected in the honey samples. Dihydrostreptomycin and sulfadimidine were detected in 6 samples, erythromycin was determined in 4 samples, streptomycin was found in 2 samples, and lastly, tetracycline was detected only in one sample. The highest and the lowest concentrations of antibiotics detected in the samples were dihydrostreptomycin and erythromycin found at the amount of 992.58 μg/kg and 0.77 μg/kg respectively. The proposed method was validated with a limit of quantification (LOQ) and limit of detection (LOD) ranging between 0.42 and 3.22 μg /kg and 0.13-0.97 μg /kg respectively. Good linearities were also achieved ranging between R 2 =0.987 and 0.999., (© 2023 Wiley-VHCA AG, Zurich, Switzerland.)

Today, the emergence of antibiotic resistance in pathogenic bacteria is considered an important problem for society. Excessive consumption of antibiotics, long-term treatments, and inappropriate prescriptions continually increase the severity of the problem. Improving antibiotic stewardship requires improved diagnostic testing, and, therefore, in vitro antibiotic susceptibility testing is becoming increasingly important. This research details the development of an antibiotic susceptibility test for Mycobacterium smegmatis using streptomycin as antibiotics. This strain was selected because it is a member of the slow growing Mycobacterium genus and serves as a useful surrogate organism for M. tuberculosis. A commercially available and low-cost screen-printed gold electrode in combination with a specifically developed nucleic acid probe sequence for the 16SrRNA region of the mycobacterial genome was employed to monitor M. smegmatis nucleic acid sequences using the techniques of square-wave voltammetry and electrochemical impedance spectroscopy. The results show that it was possible to detect M. smegmatis sequences and distinguish antibiotic-treated cells from untreated cells with a label-free molecular detection. As a result, the in vitro antibiotic susceptibility test revealed that M. smegmatis showed sensitivity to streptomycin after a 24-H incubation, with the developed protocol representing a potential approach to determining antibiotic susceptibility more quickly and economically than current methods., (© 2020 International Union of Biochemistry and Molecular Biology, Inc.)

A dual-ratiometric aptasensor by coupling of photoelectrochemical and electrochemical assays with a bifunctional probe was proposed for the determination of streptomycin. • Dual-ratiometric aptasensor by in-situ coupling of PEC and EC assay was proposed. • Bifunctional probe of methylene blue was selected to simultaneously produce PEC and EC response signals. • High analytical properties of this aptasensor were observed for the determination of streptomycin. This work reports a dual-ratiometric aptasensor based on the in-situ coupling of photoelectrochemical (PEC) and electrochemical (EC) assay for streptomycin (STR) detection. The key point is to take advantage of methylene blue (MB) as a bifunctional probe to simultaneously produce photocurrent (I MB-PEC) and redox current (I MB-EC). MB serves as a bridge to couple PEC with EC assay in situ, offering a PEC&EC dual-mode sensing. The redox current of ferrocene (I Fc-EC) is designed as reference signal. Based on this principle, the specific recognition of STR leads to the stripping of Fc-tagged aptamer, and triggers the hybridization chain reaction to construct DNA duplex capable of absorbing MB. Using I MB-EC /I Fc-EC and I MB-PEC /I Fc-EC as yardsticks, the aptasensor offers two sets of linear ranges, i.e., 1 × 10-11–1 × 10-5 M for I MB-EC /I Fc-EC and 1 × 10-9–1 × 10-4 M for I MB-PEC /I Fc-EC. The dual-ratiometric strategy endows the aptasensor with enhanced analytical performances compared with that of single-signal or single-ratiometric assay. Our work offers an efficient way to fabricate high-performance aptasensors, and MB-based dual-mode sensing may provide a right tool to study interactions between PEC and EC behaviors. [ABSTRACT FROM AUTHOR]

• A direct Z-scheme CdTe/APTES-WO 3 heterostructure was synthesized by electrostatic adsorption. • The resultant CdTe/APTES-WO 3 /ITO exhibited a 2.5-fold higher photocurrent than that at CdTe/ITO. • The proposed PEC aptasensor showed superior analytical properties for STR. The newly-emerging direct Z-scheme heterostructures have been extensively studied as photocatalysts; however, their photoelectrochemical (PEC) aptasensing applications are still in infancy. In this work, we constructed a novel direct Z-scheme heterostructure with CdTe quantum dots (QDs) and WO 3 nanosheets via interface engineering for PEC aptasensing of streptomycin (STR). To fabricate the solid-solid interface with a large effective area, the surface modification of WO 3 by (3-Aminopropyl) triethoxysaline (APTES) was performed to uniformly absorb negatively-charged CdTe QDs via electrostatic interaction. The resultant CdTe/APTES-WO 3 heterostructure showed a 2.5-times amplified PEC response compared with that of CdTe QDs. The photoinduced Z-Scheme electron transfer mechanism was confirmed in such heterostructure. Taking advantage of its superior PEC properties, a high-performance aptasensor for the detection of STR was constructed. The proposed aptasensor showed a linear response ranging from 1.0 × 10−9 M (1.5 μg kg−1) to 5.0 × 10−7 M (728.5 μg kg−1) with a detection limit (S/N = 3) of 3.3 × 10−10 M (0.5 μg kg−1). Moreover, the aptasensor has been applied to STR analysis in leaves of pimiento. Our work provided a novel and efficient strategy for the detection of STR, which should also promote the application of PEC aptasensing in agricultural field. [ABSTRACT FROM AUTHOR]

Streptomycin (STR) and dihydrostreptomycin (DSTR) are two of the most common aminoglycoside antibiotics used in veterinary medicine. STR is produced by some streptomyces griseus strains, and DSTR is a derivative of STR. In recent years, STR has been widely used in grapes to induce denuclearization. However, high levels of STR may have adverse effects like serious ototoxicity and nephrotoxicity. Therefore, to ensure the quality of grapes and the health of consumers, the regulation of STR and DSTR levels in grapes is required. An analytical method was developed for the identification and quantification of STR and DSTR in grapes by liquid chromatography-tandem mass spectrometry (LC-MS/MS). STR and DSTR are highly polar compounds due to the presence of various amino and hydroxyl groups in their structure. The determination of STR and DSTR poses a considerable analytical challenge, both during sample preparation and instrument analysis. In this study, the main factors governing the response, recovery, and sensitivity of these compounds, such as the type of chromatographic column, the type and proportion of the mobile phase and extraction solvent, the dosage of sodium 1-hexane sulfonate solution, and elution solvent and its volume, were investigated during sample pretreatment and instrument analysis. The STR and DSTR residues in the grape sample were extracted by ultrasonication with a phosphoric acid solution (pH 2), and cleanup and enrichment was performed using an Oasis HLB solid phase column. The analysis was performed using a UPLC Waters HSS T3 column (100 mm×2.1 mm, 1.8 μm) at the column temperature of 35℃. The injection volume was 2 μL. The mobile phase consisted of 0.1% formic acid aqueous solution and methanol with a volume ratio of 60:40. ESI-MS/MS was operated in multiple reaction monitoring (MRM) mode. External standard calibration curves were used for quantification. Based on the optimized method, both analytes displayed good linearity between 2 and 400 μg/L. The correlation coefficients were 0.9991-0.9997. Recoveries in spiked blank grape samples (5, 10, 20, and 40 μg/kg) ranged from 76.8% to 91.9%, with the relative standard deviations (RSDs) less than 10.2%, in compliance with the current legislation. The limits of detection and the limits of quantification of both analytes were 1 μg/L and 5 μg/kg, respectively. To assess the feasibility and potential of the proposed approach for routine analyses of STR and DSTR in other kinds of grape samples, the developed method was applied to the analysis of these compounds in red grapes, xinyu grapes, and xiahei grapes. The recoveries of STR and DSTR in the three kinds of blank grape samples were 77.2%-83.9% and 70.8%-78.9%, respectively, and the RSDs ranged from 3.0% to 15.6%. The results showed that the optimized methods can yield satisfactory recoveries for the analytes in grapes. In this method, the combination of Waters HSS T3 column to overcome the difficulties of the retention and separation of these highly polar compounds in the reverse phase, avoids the use of an ion-pair additive in the mobile phase to increase their retention, which is known to cause severe contamination of the column and serious ion suppression with electrospray ionization detection. In addition, the ideal enrichment and purification effect can be achieved by adding a sodium 1-hexane sulfonate solution to the superstratum extract with the use of only Oasis HLB for sample treatment. The method described herein has the advantages of easy operation, accuracy, and selectivity, making it feasible for the identification and quantification of STR and DSTR residues in grapes.

Colorimetric analytical strategies exhibit great promise in developing on-site detection methods for antibiotics, while substantial recent research efforts remain problematic due to dissatisfactory sensitivity. Taking this into account, we develop a novel colorimetric sensor for in-field detection of antibiotics by using aptamer (Apt)-capped and horseradish peroxidise (HRP)-embedded zeolitic metal azolate framework-7 (MAF-7) (Apt/HRP@MAF-7) as target recognition and signal transduction, respectively. With the substrate 3,3',5,5'-tetramethylbenzidine (TMB)-impregnated chip attached on the lid, the assay can be conveniently operated in a tube and reliably quantified by a handheld colorimeter. Hydrophilic MAF-7 can not only prevent HRP aggregation but also enhance HRP activity, which would benefit its detection sensitivity. Besides, the catalytic activity of HRP@MAF-7 can be sealed through assembling with Apt and controllably released based on the bioresponsivity via forming target-Apt complexes. Consequently, a significant color signal can be observed owing to the oxidation of colorless TMB to its blue-green oxidized form oxTMB. As a proof-of-concept, portable detection of streptomycin was favorably achieved with excellent sensitivity, which is superior to most reported methods and commercial kits. The developed strategy affords a new design pattern for developing on-site antibiotics assays and immensely extends the application of enzyme embedded metal-organic framework composites.

Antibiotic residues are major contaminants in milk because of their use in agriculture and animal husbandry. In particular, streptomycin, an aminoglycoside antibiotic, is a potential risk to consumers because of its ototoxicity, anaphylaxis, and growth inhibition. Herein, monoclonal antibodies for streptomycin were conjugated with europium microspheres to serve as detection probes for the development of a chromatographic time-resolved fluoroimmunoassay to detect streptomycin residues in milk. The method had a low detection limit of 0.58 µg/kg, a linear range of 0.8 to 6.25 μg/kg, and substantial recovery, from 85.6 to 108.3%. It showed slight cross-reactivity with another aminoglycoside analog. Strong correlations between the results of established chromatographic time-resolved fluoroimmunoassay and ultra-performance liquid chromatography-tandem mass spectrometry indicated that the established fluoroimmunoassay is a reliable method for rapid onsite detection of streptomycin in milk and it has great potential in food safety monitoring., (Copyright © 2020 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.)

A self-powered aptasensor for streptomycin detection was constructed with a photofuel cell combined with a capacitor and a digital multimeter. The sensitivity of the proposed sensor was 8.7 times of that without using a capacitor amplifier circuit.

Antibiotics are considered emerging pollutants which indiscriminate use has led to the development of antibiotic-resistant bacteria, while their improper disposal has caused adverse effects to the environment and human health. Thus, the development of devices or techniques capable of detecting antibiotics with high sensitivity, low detection limits, and reasonable cost becomes of prime importance. In this work, an electronic tongue (e-tongue) based on molybdenum disulfide (MoS 2 ) and graphene oxide (GO) was developed and employed to detect four distinct antibiotics, namely cloxacillin benzathine, erythromycin, streptomycin sulfate, and tetracycline hydrochloride. The five sensing units of the e-tongue were obtained using the drop-casting method to modify gold interdigitated electrodes with MoS 2 and GO. Using Principal Component Analysis to process the experimental data allowed the e-tongue to recognize samples contaminated with distinct antibiotics at varied concentrations from 0.5 to 5.0 nmol L -1 . Analyses with real samples were also performed using river water and human urine and the electronic tongue was able to differentiate the samples at a nanomolar level. The proposed system represents a sensitive and low-cost alternative for antibiotic analyses in different liquid media., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Antibiotics can affect microbial community structure and promote antibiotic resistance. However, the course of microbial community recovery in wastewater treatment systems after antibiotic disturbance remains unclear. Herein, multiple molecular biology tools, including 16S amplicon sequencing, GeoChip 5.0, quantitative polymerase chain reaction (qPCR), and metagenomic sequencing, were used to investigate the year-long (352 d) recovery of the microbial community functional structure in an aerobic biofilm reactor. Nitrification was completely inhibited under 50 mg/L of streptomycin spiking (STM&#95;50) due to the significant reduction of ammonia-oxidizing bacteria, but recovered to original pre-disturbance levels after streptomycin removal, indicating the high resilience of ammonia-oxidizing bacteria. Bacterial community richness and diversity decreased significantly under STM&#95;50 (p < 0.05), but recovered to levels similar to those observed before disturbance after 352 d. In contrast, bacterial composition did not recover to the original structure. The carbon degradation and nitrogen cycling functional community significantly changed after recovery compared to that observed pre-disturbance (p < 0.05), thus indicating functional redundancy. Additionally, levels of aminoglycoside and total antibiotic resistance genes under STM&#95;50 (relative abundance, 0.33 and 0.80, respectively) and after one year of recovery (0.12 and 0.29, respectively) were higher than the levels detected pre-disturbance (0.04 and 0.24, respectively). This study provides an overall depiction of the recovery of the microbial community functional structure after antibiotic exposure. Our findings give notice that recovery caused by antibiotic disturbance in the water environment should be taken more seriously, and that engineering control strategies should be implemented to prevent the antibiotic pollution of wastewater., Competing Interests: Declaration of competing interest The authors declare no conflicts of interest., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A MOF-based bio-bar code material was synthesized and firstly applied to develop an electrochemical streptomycin (STR) aptasensor. By using MOF-based bio-bar code and enzyme-assisted target recycling for dual-signal amplification, highly sensitive detection of STR was achieved. The sensing surface was simply fabricated by immobilizing a mixed monolayer of thiolated cDNA/aptamer duplexes (dsDNA) and 6-mercapto-1-hexanol (MCH) on the gold nanoparticle modified screen printed carbon electrode (Au/SPCE). The presence of target STR caused highly efficient removal of the aptamers from dsDNA assisted by Exo I enzyme. Then MOF-based bio-bar codes were backfilled to achieve the adsorption of electroactive Ru(NH 3 ) 6 3+ (RuHex) on electrode surface. The electrochemical signal of the surface-confined RuHex was used for quantitation. The analytical performance for STR was satisfactory with a wide linear range of 0.005-150 ng mL -1 , a low detection limit of 2.6 pg mL -1 and a good selectivity towards other three antibiotics. Moreover, the application of this aptasensor for determination of STR in real milk samples was also realized. With these merits, this dual-signal amplification assay might provide one of the effective ways for food safety monitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: Misuse of antibiotics in veterinary medicine has the potential to generate residues in animal derived products, which could contributing to the development of an important health risk either through the exposure to antibiotic residues or the transfer of antibiotic resistance among foodborne pathogens as well. Tetracycline (TE) and eptomycin (ST) are commonly used as antibiotics in the Egyptian animal husbandry. The objective of this study, quick detection of TE and ST in fresh local beef tissue samples using radioimmunoassay Charm II technique, isolation and identification of relevant highly resistant bacterial strains. In addition to investigating the effect of gamma radiation on the susceptibility of such resistant strains to TE and ST., Results: Tetracycline (TE) was detected in all collected samples, while ST was detected in 38.46% (5/13) and 87.5% (7/8) of meat and liver samples, respectively. Fifty-one bacterial isolates were isolated from the tested samples, among them, the highest resistant isolates to TE or ST were identified as Streptococcus thoraltensis, Proteus mirabilis (2 isolates) and E. coli (3 isolates). Among them, the highest D 10 -values in phosphate buffer; 0.807 and 0.480; kGy were recorded with S. thoraltensis and E. coli no.3, respectively. Such values increased to record 0.840 and 0.549 kGy, respectively after artificial inoculation into meat, indicating increased resistance to gamma radiation. Gamma radiation at dose 3 kGy increased the susceptibility of S. thoraltensis up to 50% to TE and ST, while the sensitivity of E. coli no.3 reached up 56% to both antibiotics at the same dose., Conclusions: High prevalence of TE in all fresh collected tissue samples suggests an extensively use of TE as antimicrobial in conventional beef production as compared to ST in the Egyptian cows' husbandry. Moreover, irradiation of food from animal origin by gamma radiation could potentially provide protection against resistant strains. In spite of limited samples used in this study, our data could raise the concerns of public health professionals about a withdrawal period before animals slaughtering, and address the importance of gamma radiation to minimize the hazards of foodborne resistant bacteria.

In photoelectrochemical sensor (PEC sensor), sensitivity and selectivity are two essential factors which are determined by photosensitive of materials and identification of elements. Herein, a novel PEC aptamer sensor for streptomycin-specific detection was developed, with which the visible-light-active TiO 2 /BiOI/BiOBr heterostructure and aptamers were employed as photoactive material and bio-identification elements, separately. The combination of an appropriate amount of TiO 2 with BiOI/BiOBr enhanced the photocurrent response, and thus is beneficial to the construction of PEC sensors. In addition, the one-pot synthesis of TiO 2 /BiOI/BiOBr has the advantage of being environmentally-friendly. Under optimized conditions, the photocurrent response of aptamer/TiO 2 /BiOI/BiOBr/ITO is linear with SRT concentration from 0.05 to 150 nM, and the detection limit (S/N = 3) is as low as 0.04 nM. This novel PEC sensing strategy provided an ultra-sensitive sensor with high selectivity and stability for SRT detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Background: The low cost of aminoglycoside (AMG) antibiotics facilitates their excessive use in animal husbandry and the agriculture sector. This scenario has led to the occurrence of residues in the food chain. After several years of AMG use in antibacterial therapy, resistance to streptomycin has begun to appear. Most of the detection methods developed for AMG antibiotics lacks specificity. A broad target specific nanoprobe would be ideal for detecting the entire class of AMGs. A rapid and sensitive method for the detection of AMGs is urgently needed., Results: Gallic acid-coated silver nanoparticles (AgNPs) were demonstrated as a nanoprobe for the colorimetric detection of AMGs (yellow to orange / red). A linear dynamic range of 50-650 pmol L -1 was achieved readily by ratiometric spectrophotometry (A 560 /A 400 ) with a limit of detection (LOD) as low as 36 pmol L -1 . The amine-groups of the AMGs function as molecular linkers, so that electrostatic coupling interactions between neighboring particles drive the formation of AgNP aggregates. The assay can also be applied for the determination of streptomycin residues in serum and milk samples., Conclusion: This study revealed the potential of an AgNP probe for the rapid and cost-effective detection of low-molecular-weight target analytes, such as the AMGs. A ligand-induced aggregation of AgNPs coated with gallic acid was reported to be a rapid and sensitive assay for AMGs. Analysis of streptomycin was demonstrated with excellent picomolar-level sensitivity. Thus, the validated method can find practical applications in the ultrasensitive detection of AMGs in complex and diagnostic settings. © 2019 Society of Chemical Industry., (© 2019 Society of Chemical Industry.)

A digital fluorescence detector (DFD), a handheld fluorescence detection device, can convert the fluorescence signal of samples into the corresponding fluorescer concentration. Herein, by adopting a DFD as the readout, a novel intelligent platform was developed based on a ratiometric paper-based device (RPD) for multiple aminoglycoside detection. There are five layers and four parallel channels contained in the designed RPD, functioning as reagent storage, fluidic path control and signal processing, respectively. The rationale of this design lies in the fact that aptamer/graphitic carbon nitride nanosheet (Apt/g-C 3 N 4 NS) modified layers can catalyze o -phenylenediamine to fluorescent 2,3-diaminophenazine (DAP) in the presence of H 2 O 2 . When Apt was removed from nanosheets via the Apt-target reaction, the peroxidase-like activity would be decreased, thus decreasing the production of DAP. All the changes of the fluorescence DAP signal can be read out using a portable DFD. Based on the DFD signal change related to the concentration of the target, a quantitative reaction platform was established. Furthermore, the sample flow and Apt-target reaction time can be reasonably regulated using the H 2 O 2 -cleavable hydrophobic compound modified layer placed between the target recognition region and detection region. Then, the practicality of this platform was verified through realizing sensitive analysis of streptomycin, tobramycin, and kanamycin simultaneously. Overall, with merits including portability and ease of operation, the platform shows great potential in on-site simultaneous detection of multiple targets, especially in resource-limited settings.

In this work, a metallic composite with strong electrocatalytic property was designed by uniformly decorating Pt and Sn nanoparticles on the surface of TiO 2 nanorods (Pt-Sn@TiO 2 ). A detection scheme was then developed based on a dual signal amplification strategy involving the Pt-Sn@TiO 2 composite and exonuclease assisted target recycling. The Pt-Sn@TiO 2 composite exhibited an enhanced oxygen reduction current owing to the synergistic effect between Pt and Sn, as well as high exposure of Pt (111) crystal face. Initially, a Pt-Sn@TiO 2 modified glassy carbon electrode produced an amplified electrochemical signal for the reduction of dissolved oxygen in the analyte solution. Next, a DNA with a complementary sequence to a streptomycin aptamer (cDNA) was immobilised on the Pt-Sn@TiO 2 modified electrode, followed by the streptomycin aptamer that hybridised with cDNA. The corresponding oxygen reduction current was diminished by 51% attributable to the hindrance from the biomolecules. After a mixture of streptomycin and RecJ f exonuclease was introduced, both the streptomycin-aptamer complex and the cDNA were cleaved from the electrode, making the Pt-Sn and Pt (111) surface available for oxygen reduction. RecJ f would also release streptomycin from the streptomycin-aptamer complex, allowing it to complex again with aptamers on the electrode. This has then promoted a cyclic amplification of the oxygen reduction current by 85%, which is quantitatively related to streptomycin. Under optimal conditions, the aptasensor exhibited a linear range of 0.05-1500 nM and a limit of detection of 0.02±0.0045 nM streptomycin. The sensor was then used in the real-life sample detection of streptomycin to demonstrate its potential applications to bioanalysis., (Crown Copyright © 2019. Published by Elsevier B.V. All rights reserved.)

An analytical method was developed for the determination of streptomycin and dihydrostreptomycin in honey using hydrophilic interaction liquid chromatography-tandem mass spectrometry (HILIC-MS/MS). The streptomycin and dihydrostreptomycin residues in the test samples were extracted with 20 g/L trichloroacetic acid aqueous solution (including 50 mmol/L phosphate, pH 6.8) and cleaned on an Oasis HLB solid phase extraction column. The products were separated on a SIELC Obelisc R column with gradient elution using 0.5% (v/v) formic acid aqueous solution and acetonitrile as mobile phases. Streptomycin and dihydrostreptomycin were detected by liquid chromatography-tandem mass spectrometry in the positive ion mode using the external standard method. Under the optimal conditions, streptomycin and dihydrostreptomycin showed good linearity ( r >0.99) in the range of 2.5-100 μg/L. The LOD and LOQ of the method was 2.0 μg/kg and 5.0 μg/kg, respectively. The spiked recoveries of the analytes from blank honey samples at the three levels of 5.0, 20.0 and 100.0 μg/kg were in the range of 86.9%-113.2% with the relative standard deviations less than 10%. With the advantages of convenience, rapidity, sensitivity and good repeatability, the method is suitable for the detection of streptomycin and dihydrostreptomycin in honey.

An electrochemical method is described for the determination of streptomycin (STR). It is making use of a gold electrode coated with a thin mesoporous silica film (MSF). In addition, silver nanoparticles were coated on the MSF to increase the surface area, to bind a large amount of aptamer (Apt), and to improve the electrical conductivity. In the presence of STR, it will bind to the Apt and hinder the diffusion of the redox probe hexacyanoferrate through the nanochannels of the mesoporous film. The aptasensor, best operated at a working potential of 0.22 V (vs. Ag/AgCl) has a linear response in the 1 fg.mL -1 to 6.2 ng.mL -1 STR concentration range. The detection limit is 0.33 fg.mL -1 . The assay was successfully validated by analyzing spiked samples of milk and blood serum. Graphical abstract Voltammetric assay of streptomycin (STR) by using a Fe(CN) 6 3-/4- probe. The aptamer was immobilized on a gold electrode modified with a mesoporous silica thin film (MSF) that was functionalized with (3-aminopropyl) triethoxysilane (APTES) and silver nanoparticles (AgNP). Incubation with STR leads to a decrease of the current.

A streptomycin-specific aptamer was used as a receptor molecule for ultrasensitive quantitation of streptomycin. The glassy carbon (GC) electrode was modified with palladium nanoparticles decorated on chitosan-carbon nanotube (PdNPs/CNT/Chi) and aminated aptamer against streptomycin. Modification of the sensing interface was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray (EDS), wavelength-dispersive X-ray spectroscopy (WDX), cyclic voltammetry (CVs), and electrochemical impedance spectroscopy (EIS). The methodologies applied for designing the proposed biosensor are based on target-induced conformational changes of streptomycin-specific aptamer, leading to detectable signal change. Sensing experiments were performed in the streptomycin concentration range from 0.1 to 1500 nM in order to evaluate the sensor response as a function of streptomycin concentration. Based on the results, the charge transfer resistance (R ct ) values increased proportionally to enhanced streptomycin content. The limit of detection was found to be as low as 18 pM. The superior selectivity and affinity of aptamer/PdNPs/CNT/Chi modified electrode for streptomycin recognition made it favorable for versatile applications such as streptomycin analysis in real samples., (Copyright © 2018 Elsevier Inc. All rights reserved.)

In the present study, we report a facile approach to employ gold nanoparticle (AuNPs) and thiol graphene quantum dots (GQD-SH) as the nanomaterial for ultrasensitive detection of streptomycin (STR). Based on this strategy, a GQD-SH was immobilized onto the surface of a glassy carbon electrode (GCE). AuNPs have been immobilized on SH groups of GQDs through bonding formation of AuS and Apt have been loaded on the electrode surface through the interaction between thiol group of aptamer. By incubating STR as a target onto the surface of the prepared Apt/AuNPs/GQD-SH/GCE as a proposed nanoaptasensor, the Apt/STR complex was formed and the changes of the electrochemical signal were evaluated with the EIS technique. The proposed nanoaptasensor showed wide linear range from 0.1 to 700pgml -1 . Finally, the proposed nanoaptasensor was successfully applied for the determination of STR in real samples and satisfactory results were obtained., (Copyright © 2017. Published by Elsevier B.V.)

The rapid detection of antibiotic residual in everyday life is very important for food safety. In order to realize the on-site and visual detection of antibiotic, a POCT method was established by using digital image colorimetry based on smartphone. Streptomycin was taken as the analyte model of antibiotics, streptomycin aptamer preferentially recognized analyte, and the excess aptamer hybridized with the complementary DNA to form the dsDNA. SYBR Green I combined with the dsDNA and then emitted obvious green fluorescence, thus the fluorescence intensity decreased with the increasing of streptomycin concentration. Then a smartphone-based device was constructed as the fluorescence readout. The smartphone camera acquired the images of the fluorescence derived from the samples, and the Touch Color APP installed in smartphone read out the RGB values of the images. There was a linear relationship between the G values and the streptomycin concentrations in the range of 0.1-100µM. The detection limit was 94nM, which was lower than the maximum residue limit defined by World Health Organization. The POCT method was applied for determining streptomycin in chicken and milk samples with recoveries in 94.1-110%. This method had the advantages of good selectivity, simple operation and on-site visualization., (Copyright © 2017 Elsevier B.V. All rights reserved.)

The authors describe an ultrasensitive method for simultaneous detection of neomycin (NEO) and quinolones antibiotics (QNS). It is based on the use of (a) two immuno-nanoprobes (a probe for NEO and a probe for QNS), (b) surface-enhanced Raman scattering (SERS) detection, and (c), a portable lateral flow assay (LFA). The two probes consist of gold nanoparticles (AuNPs) conjugated to the Raman active molecule 4-aminothiophenol (PATP), and to monoclonal antibody against NEO (NEO mAb) or against NOR (NOR mAb). Quantitative detection of NEO and QNS was realized via SERS of the PATP-coated AuNPs captured in the test line of a LFA. Under optimized condition, the visual limits of LFA are 10 ng·mL -1 for NEO and 200 ng·mL -1 for NOR, and with LODs down to 0.37 pg·mL -1 and 0.55 pg·mL -1 by using SERS. The NEO test line is not interfered by the NEO analogues gentamycin, streptomycin and tobramycin, but the NOR test line suffers from different degrees of cross-reactivity (CR) to 12 common other QNS, the CRs ranging from 1.5% to 136%. The recoveries of NEO and NOR from spiked milk samples ranged between 86% and 121%, with relative standard deviations (RSD) from 3% to 6%. The method is highly sensitive, accurate and effective. It may be applied to simultaneous detection of NEO and 8 QNS, including NOR, enoxacin, ciprofloxacin, ofloxacin, fleroxacin, marbofloxacin, enrofloxacin, and pefloxacin. Graphical abstract Schematic of a lateral flow assay (LFA) based on an indirect competitive model. By using two test lines, the LFA can detect the neomycin and quinolones antibiotics simultaneously. Based on the surface-enhanced Raman scattering (SERS), the LFA shows high sensitivity to antibiotics with low limit of detection.

Gene regulation systems are mimicked by simple quantitative detection of non-nucleic acid molecular targets such as protein and metabolite. Here, we describe a one-tube, one-step real-time quantitative detection methodology for isothermal signal amplification of those targets. Using this system, real-time quantitative detection of thrombin and streptomycin, which were used as examples for protein and metabolite targets, was successfully demonstrated with detection limits of at most 50 pM and 75 nM, respectively. Notably, the dynamic range of target concentrations could be obtained for over four orders of magnitude. Thus, our method is expected to serve as a point-of-care or on-site test for medical diagnosis and food and environmental hygiene.

Detection and quantitation of antibiotic residues in blood serum and foodstuffs are in great demand. We have developed aptasensors for detection of streptomycin using electrochemical and optical methods. In the first method, an electrochemical aptasensor was developed for sensitive and selective detection of streptomycin, based on combination of exonuclease I (Exo I), complementary strand of aptamer (CS), arch shaped structure of aptamer (Apt)-CS conjugate, and gold electrode. The designed electrochemical aptasensor exhibited high selectivity toward streptomycin with a limit of detection (LOD) as low as 11.4 nM. Moreover, the developed electrochemical aptasensor was successfully used to detect streptomycin in milk and serum with LODs of 14.1 and 15.3 nM, respectively. In the second method, fluorescence quenching and colorimetric aptasensors were designed for detection of streptomycin based on aqueous gold nanoparticles (AuNPs) and double-stranded DNA (dsDNA). In the absence of streptomycin, aptamer/FAM-labeled complementary strand dsDNA is stable, resulting in the aggregation of AuNPs by salt bridge and an obvious color change from red to blue and strong emission of fluorescence. The colorimetric and fluorescence quenching aptasensors showed excellent selectivity toward streptomycin with limit of detections as low as 73.1 and 47.6 nM, respectively. The presented aptasensors were successfully used to detect streptomycin in milk and serum. For serum, LODs were determined to be 58.2 and 102.4 nM for fluorescence quenching and colorimetric aptasensors, respectively. For milk, LODs were calculated to be 56.2 and 108.7 nM for fluorescence quenching and colorimetric aptasensors, respectively.

Antibiotic industrial dregs, generated from the production of antibiotics by fermentation, are banned in China as animal feed additives. Official monitoring programs require the analysis of feeds for possible illegal use of the dregs. A rapid and sensitive method was developed for the simultaneous determination of streptomycin and streptidine as markers for streptomycin industrial dregs in pig and poultry compound feeds. After extraction with 20% aqueous trichloroacetic acid and pH adjustment, sample cleanup was performed by weak cation-exchange solid-phase extraction. UPLC-ESI-MS/MS was carried out using a hydrophilic interaction chromatography(HILIC)column to achieve separation. Quantification required matrix-matched calibrations in a linear range of 50-1000μgkg -1 ; the calibration curves were linear in this range with coefficients of determination of 0.991 and 0.994 for streptomycin and streptidine, respectively. The method validity parameters-LODs (20μgkg -1 ) and LOQs (50μgkg -1 ), recoveries (71-78% and 75-84%, respectively), and relative reproducibility (5.4-9.6%)-satisfy the requirements of routine analysis., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Sensitive and fast detection of antibiotic residues in animal derived foods and blood serum is of great interest. In this study a fluorescent aptasensor was designed for selective and sensitive detection of streptomycin (STR) based on Exonuclease III (Exo III), SYBR Gold and aptamer complimentary strand. In the absence of STR, the fluorescence intensity is weak. Upon addition of STR, the aptamer binds to its target, leading to release of complementary strand from aptamer and more protection against Exo III function. Following addition of SYBR Gold, a strong fluorescence intensity is obtained. This aptasensor showed a high selectivity toward STR with a limit of detection (LOD) as low as 54.5 nM. The validity of the procedure and applicability of the aptasensor were successfully assessed by detection of STR in a spiked milk and blood serum without interference from the sample matrix., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Objective: To develop a method for simultaneous determination of streptomycin and dihydrostreptomycin residues in tomato ketchup by ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS)., Methods: The sample was dissolved with phosphorus solution (pH 2) and extracted by ultrasonic. The pigment was removed with n-hexane. Then, the sample was cleaned up by HLB SPE. The HILIC chromatographic column (100 mm x 2.1 mm, 1.7 μm) was used to complete the separation under gradient elution. The mixed solution of 0.1% formic acid solution and acetonitrile was used as mobile phase. The detection of streptomycin and dihydrostreptomycin were carried out by MS/MS under multiple reaction monitoring (MRM) mode. The external standard method was used for quantitative analysis., Results: The calibration curves for streptomycin and dihydrostreptomycin were indicated in the range of 0.005 - 0.100 mg/kg, and the detection limits were both 0.005 mg/kg. The recoveries of streptomycin and dihydrostreptomycin were ranged from 79.5% to 93.9% with relative standard deviations no more than 10%., Conclusion: The method is simple and accurate to meet the requirements for determination of streptomycin and dihydrostreptomycin residues in tomato ketchup.

Antibiotic residues, which are among the most common contaminants in animal-based food products such as milk, have become a significant public health concern. Here, we combine a multicolor quantum dot (QD)-based immunofluorescence assay and an array analysis method to achieve simultaneous, sensitive and visual detection of streptomycin (SM), tetracycline (TC), and penicillin G (PC-G) in milk. Antibodies (Abs) for SM, TC and PC-G were conjugated to QDs with different emission wavelengths (QD 520 nm, QD 565 nm and QD 610 nm) to serve as detection probes (QD-Ab). Then a direct competitive fluorescent immunoassay was performed in antigen-coated microtiter plate wells for simultaneous qualitative and quantitative detection of SM, TC, and PC-G residues, based on fluorescence of the QD-Ab probes. The linear ranges for SM, TC and PC-G were 0.01-25 ng/mL, 0.01-25 ng/mL and 0.01-10 ng/mL, respectively, with detection limit of 5 pg/mL for each of them. Based on fluorescence of the QD-Ab probes, residues of the three antibiotics were determined visually and simultaneously. Compared with a commercial enzyme-linked immunosorbent assay kit, our method could achieve simultaneous analysis of multiple target antibiotics in multiple samples in a single run (high-throughput analysis) and improved accuracy and sensitivity for analysis of residues of the three antibiotics in authentic milk samples. This new analytical tool can play an important role in ameliorating the negative impact of the residual antibiotics on human health and the ecosystem., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Antimicrobial residues found to be present in milk can have both health and economic impacts. For these reasons, the widespread routine testing of milk is required. Due to delays with sample handling and test scheduling, laboratory-based tests are not always suited for making decisions about raw material intake and product release, especially when samples require shipping to a central testing facility. Therefore, rapid on-site screening tests that can produce results within a matter of minutes are required to facilitate rapid intake and product release processes. Such tests must be simple for use by non-technical staff. There is increasing momentum towards the development and implementation of multiplexing tests that can detect a range of important antimicrobial residues simultaneously. A simple in situ multiplexed planar waveguide device that can simultaneously detect chloramphenicol, streptomycin and desfuroylceftiofur in raw dairy milk, without sample preparation, has been developed. Samples are simply mixed with antibody prior to an aliquot being passed through the detection cartridge for 5 min before reading on a field-deployable portable instrument. Multiplexed calibration curves were produced in both buffer and raw milk. Buffer curves, for chloramphenicol, streptomycin and desfuroylceftiofur, showed linear ranges (inhibitory concentration (IC)20-IC80) of 0.1-0.9, 3-129 and 12-26 ng/ml, whilst linear range in milk was 0.13-0.74, 11-376 and 2-12 ng/ml, respectively, thus meeting European legislated concentration requirements for both chloramphenicol and streptomycin, in milk, without the need for any sample preparation. Desfuroylceftiofur-contaminated samples require only simple sample dilution to bring positive samples within the range of quantification. Assay repeatability and reproducibility were lower than 12 coefficient of variation (%CV), whilst blank raw milk samples (n = 9) showed repeatability ranging between 4.2 and 8.1%CV when measured on all three calibration curves. Graphical Abstract MBio SnapEsi reader and cartridge.

Silver nanoplate hierarchical turreted ordered arrays were fabricated through an electro-deposition method on ordered acuate silicon nanocone templates. Such arrays can be used as SERS substrates for trace analyses of streptomycin sulphate, and exhibit high activity and stability. This work is of importance in practical applications based on the SERS effect of noble metal micro/nano-structured arrays.

A colorimetric and fluorescent dual-responses chemosensor (PT3, a water-soluble polythiophene) for streptomycin was designed and synthesized. The structure of PT3 was characterized by using infrared spectroscopy, (1)H NMR and gel-permeation chromatography analyses. The conformational change of PT3 induced by streptomycin resulted in the red shift of absorption spectra and fluorescent quenching. Moreover, PT3 showed excellent selectivity for streptomycin over other antibiotics and biomolecules. PT3 could quantificationally detect streptomycin in the range of 2-70 μM with a detection limit of 0.2 μM (116 ppb), which is lower than the maximum residue limit defined by World Health Organization (200 ppb)., (Copyright © 2014 Elsevier B.V. All rights reserved.)

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A method was established for the determination of streptomycin (STR) and dihydrostreptomycin (DHS) in pollens based on high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The sample was extracted and cleaned-up by a C18 solid phase extraction cartridge. The separation was carried out on a Protemix WCX-NP5 column (100 mm x 2.1 mm, 5 microm) with a gradient elution using 5% (v/v) formic acid, 20 mmol/L ammonium acetate and methanol as mobile phases. The analysis of streptomycin and dihydrostreptomycin was performed under electrospray positive ionization mode. The limits of detection (LOD, S/N = 3) and limits of quantification (LOQ, S/N = 10) for the both were 5 microg/kg and 10 microg/kg, respectively. Good linearities (r > 0.99) were achieved for the target compounds over the range of 10-200 microg/L. The recoveries at three spiked levels (10, 20, 50 microg/kg) in the blank matrices, such as pollen pini, corn pollen, camellia pollen, sunflower pollen, rape pollen and bee pollen, were from 76.8% to 100.3% with the relative standard deviations varied from 3.70% to 12.6%. The method is accurate, practical, and can be applied to most of the contaminated matrices. With this method, heptafluorobutyric acid is not required as mobile phase which is harmful to MS spectrometer.

In this work a spectrophotometric flow injection analysis system for streptomycin determination in veterinary samples, is being proposed. The method is based on streptomycin alkaline hydrolysis that forms guanidine, followed by the reaction with Fe(II). The colored product has absorption peak at 520 nm. To evaluate and optimize the system parameters, chemometrics tools, such as factorial design, Pareto chart and Doelhert design, were used. The veterinary samples are diluted in water and introduced in the FIA system, therefore no sample preparation is required. The optimized system presented: linear range of 60 up to 1000 mg L(-1), limit of detection of 18 mg L(-1) and sampling rate of 36 readings per hour. The precision was checked and the CV for veterinary sample readings were always less than 6.5%. The accuracy was studied by comparison with chromatographic method, thus, five samples of pharmaceutical veterinary were determined by HPLC and by the proposed method, and the results are in agreement (t-test, p=0.05)., (Copyright © 2013 Elsevier B.V. All rights reserved.)

In the context of multi-residue screening in honey, a complete methodology was developed for 200 veterinary drugs comprising a sample preparation step and an ultra-high-performance liquid chromatography (UHPLC) coupled to time-of-flight (TOF) mass spectrometry analysis. In addition, specific analytical strategies were developed for two compounds, streptomycin and chloramphenicol, using UHPLC and tandem mass spectrometry (MS/MS). Methodologies were then applied to real honey samples obtained from the Swiss market.

A single-step methanol extraction based method was developed and validated for simultaneous estimation of the residues of streptomycin and tetracycline group compounds in pomegranate fruits by LC-MS/MS. The limits of quantification for all target compounds were ≤0.005 mg kg(-1) with recoveries (%) at fortification levels of 0.005, 0.01, and 0.05 mg kg(-1) being within 90-116% (RSD ≤ 9%) and interday precision RSD ≤ 12% at 0.01 mg kg(-1). A field experiment on the dissipation of streptomycin and tetracycline (including 4-epimers) residues in pomegranate fruits with regards to field applications of the commercial formulation Streptocycline SP (streptomycin sulfate 90% + tetracycline hydrochloride 10%) at 200 and 400 g a.i. ha(-1) indicated preharvest intervals of 45 and 55 days for streptomycin and 12 and 15 days for tetracycline, respectively. The study will be useful in promoting effective residue monitoring and ensuring safe use of these antibiotics in managing bacterial diseases of pomegranate.

Single-stranded DNA (ssDNA) aptamers specific to streptomycin were screened and identified from a random oligonucleotides library by affinity magnetic beads-based SELEX. After eight rounds of selection, 16 ssDNA with different sequences were identified. Then the dissociation constants (Kd) of these ssDNA were determined and an aptamer (STR1) with highest affinity for streptomycin was identified. Further study showed that aptamer STR1 exhibits very low affinity for other aminoglycoside antibiotics, indicating high specificity. With this aptamer, detection of streptomycin was achieved by using gold nanoparticles (AuNPs)-based colorimetric method. In the presence of streptomycin, the competitive binding of the target and the aptamer decreases the stability of AuNPs in NaCl solution, triggers the aggregation, and exhibits visible color change of AuNPs solution. Through UV-visible spectroscopic quantitative analysis, streptomycin can be detected in the range of 0.2-1.2 μM. The presence of other aminoglycoside antibiotics shows neglectable disturbance. Furthermore, the established method was utilized to detect streptomycin in honey, and the same low detection limit and linear detection range were achieved., (Copyright © 2013 Elsevier B.V. All rights reserved.)

Redox-active magnetic molecularly imprinted polymer (mMIP) nanospheres were first synthesized and functionalized with streptomycin templates for highly efficient electrochemical determination of streptomycin residues (STR) in food by coupling with bioelectrocatalytic reaction of enzymes for signal amplification. The mMIP nanospheres were synthesized by using Au(III)-promoted molecularly imprinted polymerization with STR templates on magnetic beads. Based on extraction of template molecules from the mMIP surface, the imprints toward STR templates were formed. The assay was implemented with a competitive-type assay format. Upon addition of streptomycin, the analyte competed with glucose oxidase-labeled streptomycin (GOX-STR) for molecular imprints on the mMIP nanospheres. With the increasing streptomycin in the sample, the conjugation amount of GOX-STR on the mMIP nanospheres decreased, leading to the change in the bioelectrocatalytic current relative to glucose system. Under optimal conditions, the catalytic current was proportional to STR level in the sample, and exhibited a dynamic range of 0.05-20 ng mL(-1) with a detection limit of 10 pg mL(-1) STR (at 3s(B)). Intra- and inter-assay coefficients of variation were below 12%. The assayed results for STR spiked samples including milk and honey with the mMIP-based sensor were received a good accordance with the results obtained from the referenced high-performance liquid chromatography (HPLC) method., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Ratiometric fluorescent sensors were constructed from RNA aptamers by generating modular ribonucleopeptide complexes. Fluorescent ribonucleopeptides containing fluorophore seminaphthorhodafluor tethered to their peptide subunit revealed a dual emission property, which permitted a ratiometric fluorescent measurement of a substrate-binding event. The strategy successfully afforded ratiometric fluorescent sensors for biologically active small ligands, tetracycline, dopamine and streptomycin.

Due to its wide field of application, sensitivity, wide range of linearity and the applicability to gradient elution, the most common detection technique for HPLC nowadays is UV/vis spectrophotometry. However, UV/vis detection comes to its limits when the analytes are lacking suitable chromophors or exhibit very different UV responses. In the past years, different types of evaporation/aerosol based HPLC detectors have been developed to fill this gap in HPLC detection. Amongst those, the corona-charged aerosol detector (CAD) is one of the most powerful and versatile representatives. In the recent past a variety of papers have been published, demonstrating the potential of the CAD in different fields of analytical chemistry. This paper is intended to provide an overview of the key performance characteristics and manifold applications for HPLC-CAD in the field of pharmaceutical analysis., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Streptomycin, the classical aminoglycoside antibiotic, generally considered the most basic drug compound was characterized in terms of protonation macro- and microconstants. ¹H NMR-pH and ¹H-¹³C HSQC-pH titrations were carried out on streptomycin and streptidine, a symmetrical constituent compound of reduced complexity to monitor the proton-binding processes of the basic sites. Accurate, undistorted, electrodeless pH measurement was ensured by a new set of in tube indicators. The microscopic protonation constants of the two guanidino groups of streptomycin were calculated by evaluating the various NMR-pH data and transferring the pair-interactivity parameter from streptidine to streptomycin. Inherent guanidino basicities fall in the range of 13.03-13.39 log k units, which drop to 12.48-12.85 upon protonation of the other site. pH-dependent distribution of the major microspecies and charge-related biological consequences are provided., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The method was specifically developed for the simultaneous determination of streptomycin and dihydrostreptomycin residues in tomato paste by tandem dual solid phase extraction (SPE) column cleanup-liquid chromatography-tandem mass spectrometry. The residues were extracted from the samples with phosphate buffer solution (pH 4). The cleanup was performed by the way of dispersive solid phase extraction and tandem dual solid phase extraction column. The polar chromatographic column was used to complete the separation of the analytes under gradient elution and the analytes were detected in multiple reaction monitoring (MRM) mode via positive electrospray ionization (ESI +). The external standard calibration curves were used for the quantification. The linear ranges were from 0.01 to 0.2 mg/L with a good linear relationship (r > 0.999) for streptomycin and dihydrostreptomycin. The limit of quantification (LOQs) was 0.02 mg/kg for the both analytes. The recovery range was from 71% to 101% with the relative standard deviations (RSDs) between 2.3% and 15%. It was indicated that this method is accurate, easier, more sensitive, and has a better purification effect in the monitoring and analysis. The method is accurate and specific to monitor and analyze of streptomycin and dihydrostreptomycin residues in tomato paste and its products.

Residual antibacterials in food constitute a risk to human health, particularly because they can contribute to the transmission of antibiotic-resistant pathogenic bacteria through the food chain. This paper presents dietary exposure assessment of streptomycin and tetracycline, based on combining food consumption data in Croatia with data on the concentration of veterinary drugs in analysed samples of food of animal origin. According to the median values, the estimated daily intake of streptomycin and tetracycline through food is 11.9 and 0.7 µg/person/day, respectively. The largest contribution to streptomycin intake comes from meat (4.8 µg/person/day, i.e. 41%), but milk is the largest source for tetracycline (0.3 µg/person/day, i.e. 46%). The estimated dietary exposure to these veterinary drugs does not exceed relevant toxicological reference values and the level of exposure is assessed to be acceptable.

A facile and simple electrochemical immunoassay for ultrasensitive determination of streptomycin residues (STR) in food was designed by using nanogold-assembled mesoporous silica (GMSNs) as bionanolabels on a three-dimensional redox-active organosilica-functionalized sensing interface. To construct such a sensing interface, we initially synthesized organosilica colloids by using wet chemical method, and then utilized the prepared colloidal organosilica nanocomposites for the immobilization of monoclonal anti-STR antibodies on a glassy carbon electrode based on a sol-gel method. The bionanolabels were prepared based on coimmobilization of horseradish peroxidase (HRP) and STR-bovine serum albumin conjugates (STR-BSA) on the GMSNs. With a competitive-type immunoassay format, the assay toward STR analyte was carried out in pH 5.5 acetate acid buffer (ABS) by using redox-active organosilica nanocomposites as electron mediators, biofunctionalized GMSNs as traces, and hydrogen peroxide (H(2)O(2)) as enzyme substrate. Under optimal conditions, the reduction current of the electrochemical immunosensor decreased with the increase in STR level in the sample, and displayed a wide dynamic range of 0.05-50 ng mL(-1) with a low detection limit (LOD) of 5 pg mL(-1) at 3s(B). Intra- and interassay coefficients of variation were less than 8.7 and 9.3% for STR detection, respectively. In addition, the methodology was validated with STR spiked samples including honey, milk, kidney, and muscle, receiving a good correspondence with the results obtained from high-performance liquid chromatography (HPLC)., (© 2011 American Chemical Society)

Electrostatic interaction between streptomycin and mercaptoacetic acid modified gold nanoparticles can be used for a facile and reliable probe for streptomycin with high sensitivity and selectivity.

For the control of impurities in streptomycin sulfate a reversed phase ion-pair high performance liquid chromatography (HPLC) method using charged aerosol detection (CAD) was developed. With this method, 21 impurities could be separated and tentatively identified using a combination of exact mass measurement by TOF-MS and MS/MS experiments with a triple quadrupole MS. For three impurities the suggested structures could be confirmed by in situ formation. The CAD detector response was found to be linear over 2 orders of magnitude allowing a straightforward quantification of all impurities. A limit of quantification of 0.09% for streptomycin sulfate and of 0.008% for streptidine sulfate (referred to the concentration of the 5mg/ml test solution) could be achieved. The HPLC method was applied to the purity testing of 12 samples of commercially available streptomycin sulfate from different manufacturers. Impurity levels between 4.6% and 16.0% were found. The current European Pharmacopoeia monograph for streptomycin sulfate only limits streptomycin B by a TLC test to 3.0%. Therefore, the results of this study underline the importance of introducing a state-of-the-art test for the control of impurities in the monograph. The new HPLC-CAD method is considered suitable for this purpose., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A rapid pretreatment-free immunochromatographic assay was developed for the control of the streptomycin (STR) content in milk and dairy products. The assay is based on the competition between an immobilized STR-protein conjugate and STR in a sample to be tested for the binding to monoclonal anti-STR antibodies conjugated to colloidal gold during the flow of the sample along a membrane strip with immobilized reactants. It is possible to improve the cut-off level of positive and negative samples distinguished by a change in the molar STR to protein ratio in the immobilized conjugate. The cut-off level (500 ng mL(-1)) thus achieved corresponds to the stated MRL of STR in milk and dairy products. For STR concentrations in the range of 16-250 ng mL(-1) its content can be quantitatively measured based on the degree of binding of a colloidal gold label in the test strip zone with the immobilized STR-protein conjugate. The duration of the assay is 10 min. The selected sizes of membrane pores and colloidal gold particles allow the assay to be carried out at room temperature without additional reactants and pretreatment. The applicability of the assay for milk, whole milk, sour clotted milk, and kefir with different fat content (from 0.5% to 6%) was confirmed. The results of quantitative immunochromatographic assay show good correlation with traditional ELISA (r was equal to 0.935 and 0.940 for the series tested)., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A voltammetric electronic tongue (VE-tongue) was developed to detect antibiotic residues in bovine milk. Six antibiotics (Chloramphenicol, Erythromycin, Kanamycin sulfate, Neomycin sulfate, Streptomycin sulfate and Tetracycline HCl) spiked at four different concentration levels (0.5, 1, 1.5 and 2 maximum residue limits (MRLs)) were classified based on VE-tongue by two pattern recognition methods: principal component analysis (PCA) and discriminant function analysis (DFA). The VE-tongue was composed of five working electrodes (gold, silver, platinum, palladium, and titanium) positioned in a standard three-electrode configuration. The Multi-frequency large amplitude pulse voltammetry (MLAPV) which consisted of four segments (1 Hz, 10 Hz, 100 Hz and 1000 Hz) was applied as potential waveform. The six antibiotics at the MRLs could not be separated from bovine milk completely by PCA, but all the samples were demarcated clearly by DFA. Three regression models: Principal Component Regression Analysis (PCR), Partial Least Squares Regression (PLSR), and Least Squares-Support Vector Machines (LS-SVM) were used for concentrations of antibiotics prediction. All the regression models performed well, and PCR had the most stable results., (Copyright © 2011 Elsevier B.V. All rights reserved.)