Search

Varying the monomer structure in a metallosupramolecular polymer template allows access to poly[n]catenanes with different ring sizes and the preferential formation of branched poly[n]catenanes.

Activating innate immunity in a controlled manner is necessary for the development of next-generation therapeutics. Adjuvants, or molecules that modulate the immune response, are critical components of vaccines and immunotherapies. While small molecules and biologics dominate the adjuvant market, emerging evidence supports the use of immunostimulatory polymers in therapeutics. Such polymers can stabilize and deliver cargo while stimulating the immune system by functioning as pattern recognition receptor (PRR) agonists. At the same time, in designing polymers that engage the immune system, it is important to consider any unintended initiation of an immune response that results in adverse immune-related events. Here, we highlight biologically derived and synthetic polymer scaffolds, as well as polymer-adjuvant systems and stimuli-responsive polymers loaded with adjuvants, that can invoke an immune response. We present synthetic considerations for the design of such immunostimulatory polymers, outline methods to target their delivery, and discuss their application in therapeutics. Finally, we conclude with our opinions on the design of next-generation immunostimulatory polymers, new applications of immunostimulatory polymers, and the development of improved preclinical immunocompatibility tests for new polymers.

Ring size is a critically important parameter in many interlocked molecules as it directly impacts many of the unique molecular motions that they exhibit. Reported herein are studies using one of the largest macrocycles reported to date to synthesize doubly threaded [3]rotaxanes. A large ditopic 46 atom macrocycle containing two 2,6-bis(

Cross-linking poly(glycidyl methacrylate) microparticles with redox-responsive bis(5-amino-l,3,4-thiadiazol-2-yl) disulfide moieties yield redox-active particles (RAPs) capable of electrochemical energy storage via a reversible 2-electron reduction of the disulfide bond. The resulting RAPs show improved electrochemical reversibility compared to a small-molecule disulfide analogue in solution, attributed to spatial confinement of the polymer-grafted disulfides in the particle. Galvanostatic cycling was used to investigate the impact of electrolyte selection on stability and specific capacity. A dimethyl sulfoxide/magnesium triflate electrolyte was ultimately selected for its favorable electrochemical reversibility and specific capacity. Additionally, the specific capacity showed a strong dependence on particle size where smaller particles yielded higher specific capacity. Overall, these experiments offer a promising direction in designing synthetically facile and electrochemically stable materials for organosulfur-based multielectron energy storage coupled with beyond Li ion systems such as Mg.

Polymer-grafted nanoparticle (PGN) films were prepared from polystyrene (PS) grafted to rodlike cellulose nanocrystals (MxG-CNC-g-PS) with a controllable grafting density (0.03–0.25 chains/nm2) and...

Manufacturing of low-density-high-strength carbon foams can benefit the construction, transportation, and packaging industries. One successful route to lightweight and mechanically strong carbon foams involves pyrolysis of polymeric architectures, which is inevitably accompanied by drastic volumetric shrinkage (usually98%). As such, a challenge of these materials lies in maintaining bulk dimensions of building struts that span orders of magnitude difference in length scale from centimeters to nanometers. This work demonstrates fabrication of macroscale low-density-high-strength carbon foams that feature exceptional dimensional stability through pyrolysis of robust template-coating pairs. The template serves as the architectural blueprint and contains strength-imparting properties (e.g., high node density, small strut dimensions); it is composed of a low char-yielding porous polystyrene backbone with a high carbonization-onset temperature. The coating serves to imprint and transcribe the template architecture into pyrolytic carbon; it is composed of a high char-yielding conjugated polymer with a relatively low carbonization-onset temperature. The designed carbonization mismatch enables inheritance of the structure, while the decomposition mismatch affords hollow struts, minimizing density. The carbons synthesized through this new framework exhibit remarkable dimensional stability (∼80% dimension retention; ∼50% volume retention) and some of the highest specific strengths (∼0.13 GPa g

Cellulose nanocrystals (CNCs) are an emergent, sustainable nanomaterial that are biosourced, abundant, and biodegradable. On account of their high aspect ratio, low density, and mechanical rigidity, they have been employed in numerous areas of biomedical research including as reinforcing materials for bone or tissue scaffolds or as carriers in drug delivery systems. Given the promise of these materials for such use, characterizing and understanding their interactions with biological systems is an important step to prevent toxicity or inflammation. Reported herein are studies aimed at exploring the in vitro and in vivo effects that the source, length, and charge of the CNCs have on cytotoxicity and immune response. CNCs from four different biosources (cotton, wood, Miscanthus x Giganteus, and sea tunicate) were prepared and functionalized with positive or negative charges to obtain a small library of CNCs with a range of dimensions and surface charge. A method to remove endotoxic or other impurities on the CNC surface leftover from the isolation process was developed, and the biocompatibility of the CNCs was subsequently assayed in vitro and in vivo. After subcutaneous injection, it was found that unfunctionalized (uncharged) CNCs form aggregates at the site of injection, inducing splenomegaly and neutrophil infiltration, while charged CNCs having surface carboxylates, sulfate half-esters, or primary amines were biologically inert. No effect of the particle source or length was observed in the in vitro and in vivo studies conducted. The lack of an in vitro or in vivo immune response toward charged CNCs in these experiments supports their use in future biological studies.

Mechanically interlocked polymers (MIPs), such as polyrotaxanes and polycatenanes, are polymer architectures that incorporate a mechanical bond. In a polyrotaxane, the mechanical bond is the result of a linear dumbbell component threaded through a ring, while in a polycatenane, it is the consequence of interlocked ring components. The interlocked nature of these architectures can result in high degrees of conformational freedom and mobility of their components, which can give rise to unique property profiles. In recent years, the synthesis and studies of a range of MIPs has allowed researchers to build an initial understanding of how incorporating mechanical bonds within a polymer structure impacts its material properties. This Review focuses on the understanding of these structure–property relationships with an outlook towards their applications, specifically focusing on four main classes of MIPs: polyrotaxanes, slide-ring gels, daisy-chain polymers and polycatenanes. Incorporating the mechanical bond into polymer architectures allows access to polymers with high-mobility elements, leading to unique material properties. This Review outlines the structure–property relationships of materials based on either polyrotaxanes (including slide-ring materials and daisy-chain polymers) or polycatenanes, and looks towards future applications and technologies.

Poly[

We investigate the use of in situ enzyme degassing to facilitate the open-to-air reversible addition–fragmentation chain transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA) in a wide range of complex aqueous solvents, including, beer, wine, liquor, and fermentation broth. This enzyme-assisted polymerization procedure is impressively robust, and poly(HEA) was attained with good control over molecular weight and a narrow dispersity in nearly all of the solvents tested. Kinetics experiments on HEA polymerization in whisky and spectroscopic analysis of the purified polymers suggest high end-group fidelity, as does the successful chain extension of a poly(HEA) macro chain transfer agent with narrow dispersity. These results suggest enzyme-assisted RAFT may be a powerful and underutilized tool for high-throughput screening and materials discovery and may simplify the synthesis of well-defined polymers in complex conditions.

Directed self-assembly of a metallosupramolecular polymer is achieved at the interface between two polymer films by simple melt pressing. Blends of a 2,6-bis(N-methylbenzimidazolyl)pyridine (MeBip) side-chain functionalized polystyrene in a polystyrene matrix and Zn(NTf2)2 in a poly(methyl methacrylate) matrix were pressed together above the Tg of the matrix polymers resulting in diffusion of the components and subsequent self-assembly of the metallosupramolecular polymer at the polymer–polymer interface. The formation of the metallosupramolecular polymer was monitored by spectroscopy and microscopy and it was found that the interfacial self-assembly occurs at the processing temperatures (ca. 210 °C) within 5 min. It was further shown that this materials system resulted in robust films that exhibited a new emergent property, namely, phosphorescence, which is not exhibited by any of the individual components nor the metallosupramolecular polymer itself.

Structurally dynamic polydisulfide networks that inherently exhibit both shape-memory and healable properties have been synthesized. These materials are semicrystalline, covalently cross-linked network polymers and as such exhibit thermal shape-memory properties. Upon heating above its melting temperature (Tm) films of the material can be deformed by a force. Subsequent cooling and removal of the force result in the material being “fixed” in this strained temporary shape through a combination of crystallinity and covalent cross-links until it is exposed to temperatures above the Tm at which point it recovers to its remembered processed shape. The incorporation of disulfide bonds, which become dynamic/reversible upon exposure to light or elevated temperatures, into these networks results in them being structurally dynamic upon exposure to the appropriate stimulus. Thus, by activating this disulfide exchange, the network reorganizes, and the material can flow and exhibit healable properties. Furthermore, ex...

Poly[n]catenanes are a class of polymers that are composed entirely of interlocked rings. One synthetic route to these polymers involves the formation of a metallosupramolecular polymer (MSP) that consists of alternating units of macrocyclic and linear thread components. Ring closure of the thread components has been shown to yield a mixture of cyclic, linear, and branched poly[n]catenanes. Reported herein are investigations into this synthetic methodology, with a focus on a more detailed understanding of the crude product distribution and how the concentration of the MSP during the ring closing reaction impacts the resulting poly[n]catenanes. In addition to a better understanding of the molecular products obtained in these reactions, the results show that the concentration of the reaction can be used to tune the size and type of poly[n]catenanes accessed. At low concentrations the interlocked product distribution is limited to primarily oligomeric and small cyclic catenanes . However, the same reaction at increased concentration can yield branched poly[n]catenanes with an ca. 21 kg mol−1, with evidence of structures containing as many as 640 interlocked rings (1000 kg mol−1)., Concentration of the metallosupramolecular polymer precursors have a significant effect on the architecture and size of the resulting poly[n]catenanes formed via a ring closing metathesis step.

Stable poly(styrene-co-2-ethylhexyl acrylate) latex particles with diameter less than 600 nm were prepared by the miniemulsion polymerization of Pickering emulsions stabilized with hexyl-functional...

Polymerized high internal phase emulsions (poly(HIPE)s) are porous polymer monoliths whose synthesis can easily be tailored to allow incorporation of functional units. In this work, nitrile containing poly(HIPE)s have been prepared with either acrylonitrile (AN) or 4-cyanostyrene (4CS) comonomers. Post-synthetic modification of these nitrile-containing poly(HIPE)s yields their corresponding amidoximated analogues, which were studied for actinide uptake. These amidoxime-functionalized, porous polymers were shown to adsorb 95 % Th4+ species from aqueous solution within 30 minutes. In contrast to other amidoxime containing polymers the uptake of UO2 2+ in these poly(HIPE)s is lower under similar conditions. A critical analysis of actinide separations and high-energy X-ray scattering data provides insight into the polymers' selectivity, enabled by the uptake of multinuclear Th clusters.

Motivated by recent achievements in the synthesis of interlocking polymers, the structural features of poly[n]catenanes, polymers composed entirely of interlocking rings (or macrocycles), are studi...

Cross-linked polymer electrolytes containing structurally dynamic disulfide bonds have been synthesized to investigate their combined ion transport and adhesive properties. Dynamic network polymers of varying cross-link densities are synthesized via thiol oxidation of a bisthiol monomer, 2,2'-(ethylenedioxy)diethanethiol, and tetrathiol cross-linker, pentaerythritol tetrakis(3-mercaptopropionate). At optimal loading of lithium bis(trifluoromethane-sulfonyl-imide) (LiTFSI) salt, the ionic conductivities (σ) at 90 °C are about 1 × 10

Polymer foams have broad application as structural and functional materials in a variety of technological applications. Polymerization of monomers present in the continuous phase of water-in-oil hi...

The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (Keq) of the polymeric solvent to the particle interface. It is demonstrated that low Keq leads to shear thinning while high Keq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in Keq increases the polymer graft density at the particle surface and that antithixotropy primar-ily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programable time dependence. These studies open the door to energy absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but can switch between these two modalities on demand., Comment: 9 pages, 5 figures (Supporting: 26 pages, 17 figures)

On account of their high strength and stiffness and their renewable nature, cellulose nanocrystals (CNCs) are widely used as a reinforcing component in polymer nanocomposites. However, CNCs are prone to aggregation and this limits the attainable reinforcement. Here, we show that nanocomposites with a very high CNC content can be prepared by combining the cationic polymer poly[(2-(methacryloyloxy)ethyl) trimethylammonium chloride] (PMETAC) and negatively charged, carboxylated CNCs that are provided as a sodium salt (CNC-COONa). Free-standing films of the composites can be prepared by simple solvent casting from water. The appearance and polarized optical microscopy and electron microscopy images of these films suggest that CNC aggregation is absent, and this is supported by the very pronounced reinforcement observed. The incorporation of 33 wt % CNC-COONa into PMETAC allowed increasing the storage modulus of this already rather stiff, glassy amorphous matrix polymer from 1.5 ± 0.3 to 6.6 ± 0.1 GPa, while the maximum strength increased from 11 to 32 MPa. At this high CNC content, the reinforcement achieved in the PMETAC/CNC-COONa nanocomposite is much more pronounced than that observed for a reference nanocomposite made with unmodified CNCs (CNC-OH).

A series of catalyst-free, room temperature dynamic bonds derived from a reversible thia-Michael reaction are utilized to access mechanically robust dynamic covalent network films. The equilibrium of the thiol addition to benzalcyanoacetate-based Michael-acceptors can be directly tuned by controlling the electron-donating/withdrawing nature of the Michael-acceptor. By modulating the composition of different Michael-acceptors in a dynamic covalent network, a wide range of mechanical properties and thermal responses can be realized. Additionally, the reported systems phase-separate in a process, coined dynamic reaction-induced phase separation (DRIPS), that yields reconfigurable phase morphologies and reprogrammable shape-memory behaviour as highlighted by the heat-induced folding of a predetermined structure., Dynamic covalent networks comprised of tunable thia-Michael bonds result in phase separated networks with tailorable mechanical and adaptive properties.

Photo-induced thiol-ene crosslinking of allyl-functionalized cellulose nanocrystal (CNC)/polymer nanocomposites allows access to films that mimic the water-enhanced mechanical gradient characteristics of the squid beak. These films are prepared by mixing the functionalized CNCs and polymer in a solvent before solution casting and drying. The photocrosslinking agents are then imbibed into the film before UV exposure. Reported herein are studies aimed at better understanding the effect of the film preparation procedure, film thickness and the conditions under which the UV treatment is carried out. It was found that when the film is heated at a temperature higher than its glass transition temperature (Tg) during the UV irradiation step there is a greater enhancement in the mechanical properties of the films, presumably on account of more efficient crosslinking between the CNC fillers. Moreover, composite films that were compression molded (at 90 °C) before the imbibing step displayed lower mechanical properties compared to the as-cast films, which is attributed to phase separation of the CNC fillers and polymer matrix during this additional processing step. Finally, the film thickness was also found to be a critical factor that affects the degree of crosslinking. For example, thinner films (50 µm) displayed a higher wet modulus ca. 130 MPa compared to ca. 80 MPa for the thicker films (150 µm). Understanding the processing conditions allows access to a larger range of mechanical properties which is important for the design of new bio-inspired mechanical gradient nanocomposites.

A series of multistage (pressure-sensitive/hot melt) adhesives utilizing dynamic thia-Michael bonding motifs are reported. The benzalcyanoacetate Michael acceptors used in this work undergo bond exchange under ambient conditions without external catalysis, facilitating pressure-sensitive adhesion. A key feature of this system is the dynamic reaction-induced phase separation that lends reinforcement to the otherwise weakly bonded materials, enabling weak, repeatable pressure-sensitive adhesion under ambient conditions and strong adhesion when processed as a hot melt adhesive. By using different pairs of benzalcyanoacetate cross-linking units, the phase separation characteristics of the adhesives can be directly manipulated, allowing for a tailored adhesive response.

The ability to impart multiple covarying properties into a single material represents a grand challenge in manufacturing. In the design of block copolymers (BCPs) for directed self-assembly and nanolithography, materials often balance orthogonal properties to meet constraints related to processing, structure and defectivity. Although iterative synthesis strategies deliver BCPs with attractive properties, identifying materials with all the required attributes has been difficult. Here we report a high-throughput synthesis and characterization platform for the discovery and optimization of BCPs with A-block-(B-random-C) architectures for lithographic patterning in semiconductor manufacturing. Starting from a parent BCP and using thiol-epoxy 'click' chemistry, we synthesize a library of BCPs that cover a large and complex parameter space. This allows us to readily identify feature-size-dependent BCP chemistries for 8-20-nm-pitch patterns. These blocks have similar surface energies for directed self-assembly, and control over the segregation strength to optimize the structure (favoured at higher segregation strengths) and defectivity (favoured at lower segregation strengths).

Mechanically robust, thermoresponsive, ion-conducting nanocomposite films are prepared from poly(2-phenylethyl methacrylate)-grafted cellulose nanocrystals (MxG-CNC-g-PPMA). One-component nanocomposite films of the polymer-grafted nanoparticle (PGN) MxG-CNC-g-PPMA are imbibed with 30 wt % imidazolium-based ionic liquid to produce flexible ion-conducting films. These films with 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[H]) not only display remarkable improvements in toughness (>25 times) and tensile strength (>70 times) relative to the corresponding films consisting of the ionic liquid imbibed in the two-component CNC/PPMA nanocomposite but also show higher ionic conductivity than the corresponding neat PPMA with the same weight percent of ionic liquid. Notably, the one-component film containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[E]) exhibits temperature-responsive ionic conduction. The ionic conductivity decreases at around 60 °C as a consequence of the lower critical solution temperature phase transition of the grafted polymer in the ionic liquid, which leads to phase separation. Moreover, holding the MxG-CNC-g-PPMA/[E] film at room temperature for 24 h returns the film to its original homogenous state. These materials exhibit properties relevant to thermal cutoff safety devices (e.g., thermal fuse) where a reduction in conductivity above a critical temperature is needed.

Bioinspired cross-linked polymer nanocomposites that mimic the water-enhanced mechanical gradient properties of the squid beak have been prepared by embedding either carboxylic acid- or allyl-functionalized cellulose nanocrystals (CNC) into an alkene-containing polymer matrix (poly(vinyl acetate-co-vinyl pentenoate), P(VAc-co-VP)). Cross-linking is achieved by imbibing the composite with a tetrathiol cross-linker and carrying out a photoinduced thiol-ene reaction. Central to this study was an investigation on how the placement of cross-links (i.e., within matrix only or between the matrix and filler) impacts the wet mechanical properties of these materials. Through cross-linking both the CNCs and matrix, it is possible to access larger wet mechanical contrasts (E'stiff/E'soft = ca. 20) than can be obtained by just cross-linking the matrix alone (where contrast E'stiff/E'soft of up 11 are observed). For example, in nanocomposites fabricated with 15 wt % of allyl-functionalized tunicate CNCs and P(VAc-co-VP) with about 30 mol % of the alkene-containing VP units, an increase in the modulus of the wet composite from about 14 MPa to about 289 MPa at physiological temperature (37 °C) can be observed after UV irradiation. The water swelling of the nanocomposites is greatly reduced in the cross-linked materials as a result of the thiol-ene cross-linking network, which also contributes to the wet modulus increase. Given the mechanical turnability and the relatively simple approach that also allows photopatterning the material properties, these water-activated bioinspired nanocomposites have potential uses in a broad range of biomedical applications, such as mechanically compliant intracortical microelectrodes.

Despite decades of interdisciplinary research on topologically linked ring polymers, their dynamics remain largely unstudied. These systems represent a major scientific challenge as they are often subject to both topological and hydrodynamic interactions (HI), which render dynamical solutions either mathematically intractable or computationally prohibitive. Here we circumvent these limitations by preaveraging the HI of linked rings. We show that the symmetry of ring polymers leads to a hydrodynamic decoupling of ring dynamics. This decoupling is valid even for nonideal polymers and nonequilibrium conditions. Physically, our findings suggest that the effects of topology and HI are nearly independent and do not act cooperatively to influence polymer dynamics. We use this result to develop highly efficient Brownian dynamics algorithms that offer enormous performance improvements over conventional methods and apply these algorithms to simulate catenated ring polymers at equilibrium, confirming the independence of topological effects and HI. The methods developed here can be used to study and simulate large systems of linked rings with HI, including kinetoplast DNA, Olympic gels, and poly[$n$]catenanes.

The following joint Editorial was originally published in ACS Applied Materials & Interfaces (DOI: 10.1021/acsami.0c10979). We confront the terrible reality that systemic racism and discrimination impacts the daily personal and professional lives of many members of the scientific community and broader society. In the U.S., the brutal killing of George Floyd while in police custody is one of the most recent examples of the centuries of systemic violence suffered by Black Americans. This moment and its aftermath lay bare the legacies of racism and its exclusionary practices. Let us be clear: we, the Editors, Staff, and Governance Members of ACS Publications condemn the tragic deaths of Black people and stand in solidarity with Black members of the science and engineering community. Moreover, ACS condemns racism, discrimination, and harassment in all forms. We will not tolerate practices and viewpoints that exclude or demean any member of our community. Despite these good intentions, we recognize that our community has not done enough to provide an environment for Black chemists to thrive. Rep. Eddie Bernice Johnson, Chairwoman of the U.S. House Committee on Science, Space, and Technology said, “So far, we have gotten by with a STEM workforce that does not come close to representing the diversity of our nation. However, if we continue to leave behind so much of our nation’s brainpower, we cannot succeed.”(1) Indeed, the U.S. National Science Foundation notes that Blacks and other under-represented minority groups continue to be under-represented in science and engineering education and employment.(2) What is abundantly clear in this moment is that this lack of representation is a symptom of systemic racism across all levels of education and professional life. We know that supportive words are not enough. We must develop and implement a concrete plan for changing our trajectory. Publications and citations are academic currency, and while we like to think publishing a manuscript is “just about the science”, we know that is not true for everyone. We have seen the biases (largely through the lens of gender and in Western countries because of the limitations in bibliometric analyses) and applaud our colleagues at the RSC for their massive study that explored these gender barriers in the publishing pipeline(3) and their recent Inclusion and Diversity Framework.(4) At the present time, unfortunately, less is known about the effects of race and ethnicity on publishing success. A study published in PeerJ, however, found that unprofessional reviewer comments had a disproportionate effect on authors from under-represented groups.(5) As the world’s leading society publisher, we have a responsibility to aggressively combat bias in all aspects of the publishing process, including systemic under-representation of Blacks in this endeavor (no ACS journal is currently led by a Black Editor-in-Chief). Within ACS Publications, we actively track gender and geographic diversity of editors, advisors, authors, and reviewers, and we anecdotally report on race of editors. Diversity encompasses many more dimensions than these, and we acknowledge that we can do much more than we have. We affirm that diversity and inclusion strengthen the research community and its impact, and we are committed to developing, implementing, tracking, and reporting on our progress to ensure that our editors, advisors, reviewers, and authors are more diverse and that all authors receive the same fair treatment and opportunity to publish in our journals. We acknowledge that we do not have all the answers now, but we seek to hear from and listen to our community on how we can improve our journals to be more diverse and inclusive. As first steps, we commit to the taking the following actions: Gathering and making public our baseline statistics on diversity within our journals, encompassing our editors, advisors, reviewers, and authors; annually reporting on progress Training new and existing editors to recognize and interrupt bias in peer review Including diversity of journal contributors as an explicit measurement of Editor-in-Chief performance Appointing an ombudsperson to serve as a liaison between Editors and our Community Developing an actionable diversity plan for each ACS journal These are only initial plans and the start of a conversation: other ideas are beginning to germinate, and we commit to sharing them with you regularly. We invite you contribute your ideas on how we can do better via our Axial website. We are listening carefully. We encourage you to take immediate action in your own circles. In a recent editorial, JACS Associate Editor Melanie Sanford(6) offered practical steps to take now. Take a moment to find out more about these actions and how to bring them into your work and your life. We all have a responsibility to eradicate racism and discrimination in the science and engineering community; indeed, to make a real difference, we need to be antiracist. The tragic events we have seen in the Black community provide great urgency to this goal. The work will be difficult and will force us to confront hard realities about our beliefs and actions. We fully expect that you, and everyone in the community, will hold us accountable.

Active thermal materials like thermal diodes, regulators, and switches have the potential to revolutionize thermal management, creating an opportunity for significant energy savings. We present results on a proposed thermal switching composite that changes its thermal conductivity based on applied strain. The composite is constructed of highly crystalline, high aspect ratio cellulose nanocrystal (CNC) nanorods embedded in a shape-memory polymer matrix. The properties of the matrix allow for changes to the mechanical state to be indefinitely retained and also for the state to be reversed; this work is the first step in demonstrating that the thermal state exhibits similar reversibility. Measurements of the neat matrix polymer show a factor of three increase in thermal conductivity with applied strain up 100% and abrupt decrease beyond this strain level. A twofold increase in the thermal conductivity is achieved for the proof-of-concept composite at 100% strain. By comparing the measured results to a Maxwell mixing model, the primary drivers of the thermal conductivity change are traced to changes in crystallinity of the matrix and CNC alignment.

Poly[n]catenanes are mechanically interlocked polymers consisting of interlocking ring molecules. Over the years, researchers have speculated that the permanent topological interactions within the ...

Correction for ‘Polycatenanes: synthesis, characterization, and physical understanding’ by Guancen Liu et al., Chem. Soc. Rev., 2022, https://doi.org/10.1039/d2cs00256f.