Search

Simultaneous MR-PET/-SPECT is an emerging technology that capitalises on the invaluable advantages of both modalities, allowing access to numerous sensitive tracers and superior soft-tissue contrast alongside versatile functional imaging capabilities. However, to optimise these capabilities, concurrent acquisitions require the MRI antenna located inside the PET/SPECT field-of-view to be operated without compromising any aspects of system performance or image quality compared to the stand-alone instrumentation. Here, we report a novel gamma-radiation-transparent antenna concept. The end-fed J-shape antenna is particularly adept for hybrid ultra-high field MR-PET/-SPECT applications as it enables all highly attenuating materials to be placed outside the imaging field-of-view. Furthermore, this unique configuration also provides advantages in stand-alone MR applications by reducing the amount of coupling between the cables and the antenna elements, and by lowering the potential specific absorption rate burden. The use of this new design was experimentally verified according to the important features for both ultra-high field MRI and the 511 keV transmission scan. The reconstructed attenuation maps evidently showed much lower attenuation ( ∼ 15 %) for the proposed array when compared to the conventional dipole antenna array since there were no high-density components. In MR, it was observed that the signal-to-noise ratio from the whole volume obtained using the proposed array was comparable to that acquired by the conventional array which was also in agreement with the simulation results. The unique feature, J-shape array, would enable simultaneous MR-PET/-SPECT experiments to be conducted without unduly compromising any aspects of system performance and image quality compared to the stand-alone instrumentation.

With the increasing availability of ultra-high field MRI systems, studying non-proton nuclei (X-nuclei), such as 23Na and 31P has received great interest. X-nuclei are able to provide insight into important cellular processes and energy metabolism in tissues and by monitoring these nuclei closely it is possible to establish links to pathological conditions and neurodegenerative diseases. In order to investigate X-nuclei, a well-designed radiofrequency (RF) system with a multi-tuned RF coil is required. However, as the intrinsic sensitivity of non-proton nuclei is lower compared to 1H, it is important to ensure that the signal-to-noise ratio (SNR) of the X-nuclei is as high as possible. This review aims to give a comprehensive overview of previous efforts, with particular focus on the design concept of multi-tuned coils, predominantly for brain applications. In order to guide the readers, the main body of the review is categorised into two parts: state-of-the art according to the single or multiple design structures and emerging technologies. A more detailed description is given in each subsection relating to the specific design approaches of, mostly, double-tuned coils, including using traps, PIN-diodes, nested and metamaterial, together with explanations of their novelties, optimal solutions and trade-offs.

Prostate cancer is one of the most common cancers among men and its early detection is critical for its successful treatment. The use of multimodal imaging, such as MR-PET, is most advantageous as it is able to provide detailed information about the prostate. However, as the human prostate is flexible and can move into different positions under external conditions, it is important to localise the focused region-of-interest using both MRI and PET under identical circumstances. In this work, we designed five commonly used linear and quadrature radiofrequency surface coils suitable for hybrid MR-PET use in endorectal applications. Due to the endorectal design and the shielded PET insert, the outer face of the coils investigated was curved and the region to be imaged was outside the volume of the coil. The tilting angles of the coils were varied with respect to the main magnetic field direction. This was done to approximate the various positions from which the prostate could be imaged. The transmit efficiencies and safety excitation efficiencies from simulations, together with the signal-to-noise ratios from the MR images were calculated and analysed. Overall, it was found that the overlapped loops driven in quadrature were superior to the other types of coils we tested. In order to determine the effect of the different coil designs on PET, transmission scans were carried out, and it was observed that the differences between attenuation maps with and without the coils were negligible. The findings of this work can provide useful guidance for the integration of such coil designs into MR-PET hybrid systems in the future.

A double-tuned 1H/19F coil using PIN-diode switches was developed and its performance evaluated. The is a key difference from the previous developments being that this design used a PIN-diode switch in series with an additionally inserted inductor in parallel to one of the capacitors on the loop. The probe was adjusted to 19F when the reverse bias voltage was applied (PIN-diode OFF), whilst it was switched to 1H when forward current was flowing (PIN-diode ON). S-parameters and Q-factors of single- and double-tuned coils were examined and compared with/without a phantom on the bench. Imaging experiments were carried out on a 9.4 T preclinical scanner. All coils were tuned at resonance frequencies and matched well. It is shown that the Q-ratio and SNR of double-tuned coil at 19F frequency are nearly as good as those of a single-tuned coil. Since the operating frequency was tuned to 19F when the PIN-diodes were turned off, losses due to PIN-diodes were substantially lower resulting in the provision of excellent image quality of X-nuclei.

Proton magnetic resonance imaging (MRI) can be combined with signals from non-proton nuclei (X-nuclei) to provide metabolic information. Double-resonant coils are often used for X-nuclei MR studies where the proton element is employed for scout imaging and B

Shape memory polyurethanes (SMPUs) have attracted much attention in the biomedical field because they can easily control the transition temperature (Ttrans) to shape memory and are biocompatible. In this study, a shape memory polyurethane with both biocompatibility and a Ttrans close to the body temperature was synthesized by using natural derivatives of isosorbide and castor oil in place of petroleum-based materials. Isosorbide and castor oil were used to form net points, and polycaprolactone diol (PCL diol) acted as the switching segment. The synthesized four polyurethane (PCL diol/isosorbide/castor oil, PICU-1, 2, 3, 4) with different isosorbide contents exhibited desired thermal and mechanical properties. In the thermo-cyclic shape memory testing experiment, the PICU series demonstrated good shape memory property, with more than 95% shape recovery ratio (Rr) and more than 90% shape fixity ratio (Rf), and PICU-3 recovered its shape within 20 s in a 37 °C water bath. In addition, the PICU series proved to be safe materials with excellent biocompatibility, as indicated by the observed C2C12 cells viability and proliferation. The stent made with the PICU-3 film showed near complete magnetization at 37 °C within 18 s and proved to be a suitable self-expanding stent.

Graphene oxide as a radon barrier in living environments was introduced by intercalating the polymer resin-coated layer inside a multilayer membrane with an area of 1 × 10 m and a thickness of 2.5 mm, prepared by the roll-to-roll method. A 5 μm-thick graphene oxide polymer resin (GOPR) layer was coated on polyethylene terephthalate (PET) film (100 μm) between the two styrene-butadiene-styrene (SBS)-modified bitumen asphalt layers fitted for construction sites. The inserted graphene oxide materials were characterized by means of infrared, Raman, and X-ray photoelectron spectroscopy (XPS). Dispersion-corrected density functional theory (DFT) calculations suggested weaker binding energies on the oxide surfaces and higher penetration energy barriers of graphene nanopores for radon (222Rn) than in the cases of the atmospheric gas molecules Ar, H2O, CO2, H2, O2, and N2. Theoretical calculations of the graphene nanopores supported the higher barrier energies of 222Rn than most ambient gases. The roll-to-roll prepared graphene materials exhibited good barrier properties for 222Rn as well as for the ambient gases. The purpose of our experimental and theoretical study is to provide a better understanding of using graphene-based materials to reduce the risk of carcinogenic radon gas in construction sites and residential buildings for practical applications.

MRI using nuclei other than protons is of clinical interest due to the important role of these nuclei in cellular processes. Phosphorous-31 (31P), for example, plays an important role in energy metabolism. However, measurement of 31P can be challenging, as the receive signal is weak compared with that of proton (1H). Consequently, it is often necessary to integrate 1H elements for localizations and B0 shimming in RF coils intended for 31P measurements. Good decoupling between the 1H and the 31P elements is therefore essential. In this paper, bent dipole antennas tuned to 1H were integrated with a four channel 31P loop coil array, in a manner providing strong geometric decoupling between dipoles and loops. As the physical length of a resonant dipole antenna is too long at 3T, the dipole antennas were bent around the load. The loss of 31P elements due to the presence of the dipole antennas was evaluated by measuring scattering parameters and comparing the SNR of 31P spectra with and without the presence of the dipole antennas. The performance of the bent dipole antenna was evaluated by simulation and sensitivity measurement. The Q-factors and the SNR of the four-loop array were reduced by less than 5% when the bent dipole antennas were introduced. The measured sensitivity of the bent dipole was higher (15%) than that of dual-tuned birdcage. The combined bent dipole and loop array is therefore a promising design for 1H/31P applications at 3T.

Purpose To propose a new Extended Monopole antenna Array with individual Shields (EMAS) coil that improves the B1 field coverage and uniformity along the z-direction. Methods To increase the spatial coverage of Monopole antenna Array (MA) coil, each monopole antenna was shielded and extended in length. Performance of this new coil, which is referred to as EMAS coil, was compared with the original MA coil and an Extended Monopole antenna Array coil with no shield (EMA). For comparison, flip angle, signal-to-noise ratio (SNR), and receive sensitivity maps were measured at multiple regions of interest (ROIs) in the brain. Results The EMAS coil demonstrated substantially larger flip angle and receive sensitivity than the MA and EMA coils in the inferior aspect of the brain. In the brainstem ROI, for example, the flip angle in the EMAS coil was increased by 45.5% (or 60.0%) and the receive sensitivity was increased by 26.9% (or 14.9%), resulting in an SNR gain of 84.8% (or 76.3%) when compared with the MA coil (or EMA). Conclusion The EMAS coil provided 25.7% (or 24.4%) more uniform B1+ field distribution compared with the MA (or EMA) coil in sagittal. The EMAS coil successfully extended the imaging volume in lower part of the brain. Magn Reson Med 75:2566–2572, 2016. © 2015 Wiley Periodicals, Inc.

A double-tuned

In this study, polycarbonate diol/isosorbide-based antibacterial polyurethane nanofiber fabrics containing Ag nanoparticles were prepared by electrospinning process. Bio-based highly elastic polyurethane was prepared from hexamethylene diisocyanate and isosorbide/polycarbonate diol (8/2) by a simple one-shot bulk polymerization. Ag nanoparticles were formed using simple thermal reduction of silver 2-ethylhexylcarbamate at 120℃. The structural and morphological properties of polyurethane/Ag nanofibers were characterized by X-ray diffraction and scanning electron microscopy. The polyurethane nanofiber fabrics were flexible, with breaking strains from 355% to 950% under 7.28 to 23.1 MPa tensile stress. The antibacterial effects of the treated polyurethane/Ag fabrics against Staphylococcus aureus and methicillin resistant Staphylococcus aureus were examined and found to be excellent. Cell proliferation using the immortalized human keratinocyte HaCaT cell line was performed in order to determine cell viability in the presence of polyurethane and polyurethane/Ag fabrics, showing cytocompatiblility and a lack of toxicity.

Purpose To enhance sensitivity and coverage for calf muscle studies, a novel, form-fitted, three-channel phosphorus-31 (31P), two-channel proton (1H) transceiver coil array for 7 T MR imaging and spectroscopy is presented. Methods Electromagnetic simulations employing individually generated voxel models were performed to design a coil array for studying nonpathological muscle metabolism. Static phase combinations of the coil elements' transmit fields were optimized based on homogeneity and efficiency for several voxel models. The best-performing design was built and tested both on phantoms and in vivo. Results Simulations revealed that a shared conductor array for 31P provides more robust interelement decoupling and better homogeneity than an overlap array in this configuration. A static B1+ shim setting that suited various calf anatomies was identified and implemented. Simulations showed that the 31P array provides signal-to-noise ratio (SNR) benefits over a single loop and a birdcage coil of equal radius by factors of 3.2 and 2.6 in the gastrocnemius and by 2.5 and 2.0 in the soleus muscle. Conclusion The performance of the coil in terms of B1+ and achievable SNR allows for spatially localized dynamic 31P spectroscopy studies in the human calf. The associated higher specificity with respect to nonlocalized measurements permits distinguishing the functional responses of different muscles. Magn Reson Med 73:2376–2389, 2015. © 2014 Wiley Periodicals, Inc.

Surgical or endovascular approaches have proved effective for large-vessel diseases over the past decade. However, approaches for small vessel diseases are unlikely to be accomplished by those for large vessels and only few have been applied, because it is hard to access to those small vessels and one could not directly delineate the affected small vessels due to a lack of detection modalities. This study is to examine patients with vascular diseases using ultra-high field 7T MRI with conventional time-of-flight TOF sequence, 3D fast low-angle shot FLASH gradient-echo. We have evaluated several radio-frequency RF coils to find the optimal one for 7T magnetic resonance angiography MRA, especially for micro-vascular imaging. We have conducted several comparison studies with vascular disease patients. The results showed that micro-vessels such as lenticulostriate arteries in the subjects with risk factors like hypertension or stroke patients were significantly less than in the healthy subjects. 7T MRA images in steno-occlusive patients also showed clearly numerous collateral vessels not visible by 1.5T or 3T MRA. Furthermore, 7T MRA images were comparable to those obtained by digital subtraction angiography DSA, particularly for micro-vascular imaging. In this article, we would like to share the clinical experiences on 7T MRA that vascular images of 7T MRA were superior to conventional angiography images including 1.5T and 3T MRA, and even comparable to DSA. We also expect that further technical development and clinical applications of 7T MRA would be a clinically important diagnostic tool, in terms of an early detection of the stroke in a totally non-invasive manner. © 2014 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 24, 121-128, 2014

Proton magnetic resonance imaging (MRI) can be combined with signals from non-proton nuclei (X-nuclei) to provide metabolic information. Double-resonant coils are often used for X-nuclei MR studies where the proton element is employed for scout imaging and B 0 shimming. This work describes the development of a new double-resonant coil capable of operating at both proton and X-nuclei frequencies. The proposed design extends the wheel-and-spoke coil, which allows for quadrature drive, by adding an extra ring outside the coil to achieve double-resonance. Furthermore, in order to maximise SNR by increasing the filling factor, the shape of the coil has been modified to a helmet style making it suitable for brain applications. The performance of the double-resonant helmet coil was evaluated by simulation and MR measurements. The helmet coil was successfully tuned to the 1H/31P resonance frequencies of a 3T MR scanner, with high isolation between the two quadrature ports. MR measurements of a phantom were carried out, and the averaged sensitivity of the double-resonant helmet coil over the whole phantom was found to be higher than that of the conventional double-tuned birdcage coil at both frequencies.

Purpose We have developed and evaluated a monopole antenna array that can increase sensitivity at the center of the brain for 7T MRI applications. Methods We have developed a monopole antenna array that has half the length of a conventional dipole antenna with eight channels for brain imaging with a 7T MRI. The eight-channel monopole antenna array and conventional eight-channel transceiver surface coil array were evaluated and compared in terms of transmit properties, specific absorption ratio (SAR), and sensitivity. The sensitivity maps were generated by dividing the SNR map by the flip angle distribution. Results A single surface coil provides asymmetric sensitivity resulting in reduced sensitivity at the center of the brain. In contrast, a single monopole antenna provides higher sensitivity at the center of the brain. Moreover, the monopole antenna array provides uniform sensitivity over the entire brain, and the sensitivity gain was 1.5 times higher at the center of the brain compared with the surface coil array. Conclusion The monopole antenna array is a promising candidate for MRI applications, especially for brain imaging in a 7T MRI because it provides increased sensitivity at the center of the brain. Magn Reson Med 71:1944–1952, 2014. © 2013 Wiley Periodicals, Inc.

Microvascular functional MR angiography using ultra-high-field 7 T MRI was used to visualize specific arterial changes in response to stimulation, and the results were compared to conventional blood oxygen level-dependent (BOLD) functional magnetic resonance imaging (fMRI). To demonstrate the potential of this new method, we conducted a visual experiment with 14 healthy subjects using optimized acquisition parameters and a dedicated radio frequency coil for 7 T MRI. The signal intensity change in the blood vessels supplying to the visual cortex, specifically the calcarine arteries, was clearly observed during stimulation. The signal changes were increased gradually up to as high as 12% as the vessel segments approach to the visual cortex where neuronal activity was believed to be occurred. The activation foci were not identical to those obtained by conventional fMRI, as expected, but they were closely related and confined to the visual cortical areas, when compared to fMRI responses. Therefore, fMRA technique using ultra-high-field 7 T MRI could provide the direct observation of microvascular changes in the arterial input vessels in relation to neuronal activity. © 2012 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 22, 18–22, 2012 © 2012 Wiley Periodicals, Inc.

Backgrounds: Recent studies have shown that thermal therapy by means of warm waterbaths and sauna has beneficial effects in chronic heart failure. However, a comprehensive investigation of the hemodynamic effects of thermal vasodilation on coronary arteries has not been previously undertaken. In this study, we studied the effect of a warm footbath (WFB) on coronary arteries in patients with coronary artery disease (CAD), as well as any adverse effect. Methods: We studied 21 patients (33.3% men, mean age 60.8 ± 13.5 years) with CAD. Coronary flow Doppler examination of the left anterior descending coronary artery and coronary flow reserve (CFR) were performed and measured using adenosine before and after a WFB. Results: Systolic and diastolic blood pressure and heart rate did not change with the WFB. Mean velocity of diastolic coronary flow significantly increased (diastolic mean flow velocity: 18.3 ± 7.1 cm/sec initial, 21.5 ± 8.0 cm/sec follow-up, P = 0.002) and CFR significantly improved (1.6 ± 0.4 vs. 2.2 ± 0.5, P < 0.001) after WFB. The WFB was well accepted and no relevant adverse effects were observed. The change of CFR after WFB correlated well with diastolic function (E’, r = 0.51, P = 0.031; E/E’, r =–0.675, P = 0.002). Conclusions: A WFB significantly improved CFR without any adverse effects in patients with mild-to-moderate CAD and can be applied with little risk of a coronary artery event if appropriately performed. (Echocardiography 2011;28:1119-1124)

Purpose: To visualize the perforating arteries originating from basilar artery (BA) by using ultra-high resolution 7T MR angiography (MRA) and optimizing MR parameters as well as radio frequency (RF) coils, which may provide important information for neurosurgery and understanding diseases of the pons, but was unable to clearly visualize with conventional MRA techniques. Materials and Methods: Seven healthy volunteers (five males and two females, age [mean ± SD] = 28.71 ± 7.54 years) were scanned using optimized MR parameters to obtain images of pontine arteries (PAs) originating from the main trunk of BA. Two different volume coils and a phased array coil were designed and compared for this study. The images obtained at 7T MRA were compared with those at 1.5T and 3T MRA. Results: The results showed that PA imaging at 7T MRI consistently provided clearly identifiable vessels, which were difficult to visualize in MR angiograms obtained at 1.5T and 3T MRIs. Volume RF coils had higher sensitivity for the center of the brain, which enhanced PA imaging compared to phased array coil. The average number of PA branches in all seven subjects observable by 7T MRA was 7.14 ± 2.79, and the visualized PA branches were found to mainly propagating on the surface of the pons. Conclusion: We have demonstrated that ultra-high resolution 7T MRA could delineate the PAs using optimized imaging parameters and volume RF coils compared to commercially available 1.5T and 3T MRIs. J. Magn. Reson. Imaging 2010;32:544–550. © 2010 Wiley-Liss, Inc.

Imaging of specific mRNA targets in cells is of great importance in understanding gene expression and cell signaling processes. Subcellular localization of mRNA is known as a universal mechanism for cells to sequester specific mRNA for high production of required proteins. Various gene expressions in Drosophila cells are studied using quantum dots (QDs) and the fluorescence in situ hybridization (FISH) method. The excellent photostability and highly luminescent properties of QDs compared to conventional fluorophores allows reproducible obtainment of quantifiable mRNA gene expression imaging. Amine-modified oligonucleotide probes are designed and covalently attached to the carboxyl-terminated polymer-coated QDs via EDC chemistry. The resulting QD-DNA conjugates show sequence-specific hybridization with target mRNAs. Quantitative analysis of FISH on the Diptericin gene after lipopolysaccharide (LPS) treatment shows that the intensity and number of FISH signals per cell depends on the concentration of LPS and correlates well with quantitative real-time PCR results. In addition, our QD-DNA probes exhibit excellent sensitivity to detect the low-expressing Dorsal-related immunity factor gene. Importantly, multiplex FISH of Ribosomal protein 49 and Actin 5C using green and red QD-DNA conjugates allows the observation of cellular distribution of the two independent genes simultaneously. These results demonstrate that highly fluorescent and stable QD-DNA probes can be a powerful tool for direct localization and quantification of gene expression in situ.

The purpose of this study was to analyze human lenticulostriate arteries (LSAs) obtained non-invasively by 7.0-T MRI. A three-dimensional time-of-flight (3D TOF) magnetic resonance angiography (MRA) technique was used with an investigational 7.0-T MRI scanner with a radio-frequency coil that was optimized and designed for angiographic purposes. We obtained images from 16 healthy volunteers (8 males and 8 females, mean age 21 +/- 2.7 years). For direct comparison of LSA images with digital subtraction angiography (DSA), we also obtained 7.0-T MRA and DSA images from one patient, a 27-year-old woman with a posterior fossa arteriovenous malformation (AVM). We then analyzed the characteristics of LSAs using a custom data analysis method with MatLab for quantitative analysis. Analysis of LSA images included shape and number of branches and origins, findings that are essential and useful for quantification of LSA abnormalities in both healthy controls and patients. Ultra-high-field MRA provided clear anatomic delineation of the LSAs, thereby suggesting that 7.0-T MRA may be a promising technique for microvascular imaging of the LSAs.

The purpose of this study was to evaluate the feasibility of MR angiography (MRA) at 7.0 Tesla (T) using optimized birdcage (BC) coils with simple end cap configurations. Shielded 16-rung high-pass BC coils were built with identical geometry and compared with different sizes and locations of end caps. To determine whether the end cap configuration was effective, the signal intensity profiles along the superior–inferior (S–I) direction were analyzed in phantom and in vivo human experiments. The effects were also investigated in two-dimensional (2D) and three-dimensional (3D) time-of-flight (TOF) MRA experiments. The signal intensity profiles showed that B1 homogeneity at the service end, that is, the end cap side, was improved as the diameter of the end caps increased and the end cap became closer to the coil end ring. The results of 2D and 3D TOF experiments showed the best improvement of vessel visibility at the BC coil with an 80% end cap, when compared with BC coils with other end cap sizes or without an end cap. In conclusion, the BC coil with an end cap was effective for improving S–I directional homogeneity and suitable for MRA applications, especially at ultrahigh field MRI, such as 7.0T. Magn Reson Med 60:330–338, 2008. © 2008 Wiley-Liss, Inc.

We propose a new type of functional imaging in magnetic resonance imaging (MRI), a functional MR angiography (fMRA). As it is known, arterial responses during neural activities have been studied in animals, but little is known about the human brain in-vivo. Proposed fMRA at ultra-high field strength, 7.0 Tesla (T), has a potential for a direct visualization of vascular responses of those blood vessels related to the neural activity during the tasks, such as the hand movement or checker board stimulation, that is, fMRA. The results of this paper clearly indicate that there is the possibility that one can directly observe the vascular changes in individual blood vessels related to the tasks in human brain in-vivo, similar to fMRI.

Luminescent CdSe/ZnS QDs, with emission in the red region of the spectrum, were synthesized and encapsulated in poly(ethylene glycol)-poly(D,L-lactide) diblock copolymer micelles, to prepare water-soluble, biocompatible QD micelles. PEG-PLA diblock copolymers were synthesized by ring opening polymerization of D,Llactide, in the presence of methoxy PEG as a macroinitiator. QDs were encapsulated with PEG-PLA polymers using a solid dispersion method in chloroform. The resultant polymer micelles, with encapsulated QDs, were characterized using various analytical techniques, such as UV-Vis measurement, light scattering, fluorescence spectroscopy, transmission electron microscopy (TEM) and atomic forced microscopy (AFM). The polymer micelles, with encapsulated QDs, were spherical and showed diameters in the range of 20–150 nm. The encapsulated QDs were highly luminescent, and have high potential for applications in biomedical imaging and detection.

Coronary artery fistulas have been diagnosed with aortography, coronary angiography, and coronary computed tomography (CT). A large fistula can be occasionally found as a mass lesion on echocardiography but cannot be easily confirmed. Here, we report a new diagnostic approach to coronary artery fistulas using a contrast agent and transthoracic echocardiography. Transthoracic echocardiography of a 46-year-old female suffering from dyspnea revealed suspicious small turbulent flow in the main pulmonary artery. Following infusion of a contrast agent, we found whitish flow in the main pulmonary artery during the diastolic phase, and aortic CT revealed two huge right coronary artery fistulas in the main pulmonary artery. A simple diagnostic approach to a coronary artery fistula using contrast agent helped us confirm the diagnosis because of the typical diastolic whitish flow in the pulmonary artery.

To propose a new Extended Monopole antenna Array with individual Shields (EMAS) coil that improves the B1 field coverage and uniformity along the z-direction.To increase the spatial coverage of Monopole antenna Array (MA) coil, each monopole antenna was shielded and extended in length. Performance of this new coil, which is referred to as EMAS coil, was compared with the original MA coil and an Extended Monopole antenna Array coil with no shield (EMA). For comparison, flip angle, signal-to-noise ratio (SNR), and receive sensitivity maps were measured at multiple regions of interest (ROIs) in the brain.The EMAS coil demonstrated substantially larger flip angle and receive sensitivity than the MA and EMA coils in the inferior aspect of the brain. In the brainstem ROI, for example, the flip angle in the EMAS coil was increased by 45.5% (or 60.0%) and the receive sensitivity was increased by 26.9% (or 14.9%), resulting in an SNR gain of 84.8% (or 76.3%) when compared with the MA coil (or EMA).The EMAS coil provided 25.7% (or 24.4%) more uniform B1+ field distribution compared with the MA (or EMA) coil in sagittal. The EMAS coil successfully extended the imaging volume in lower part of the brain. Magn Reson Med 75:2566-2572, 2016. © 2015 Wiley Periodicals, Inc.

To enhance sensitivity and coverage for calf muscle studies, a novel, form-fitted, three-channel phosphorus-31 ((31) P), two-channel proton ((1) H) transceiver coil array for 7 T MR imaging and spectroscopy is presented.Electromagnetic simulations employing individually generated voxel models were performed to design a coil array for studying nonpathological muscle metabolism. Static phase combinations of the coil elements' transmit fields were optimized based on homogeneity and efficiency for several voxel models. The best-performing design was built and tested both on phantoms and in vivo.Simulations revealed that a shared conductor array for (31) P provides more robust interelement decoupling and better homogeneity than an overlap array in this configuration. A static B1 (+) shim setting that suited various calf anatomies was identified and implemented. Simulations showed that the (31) P array provides signal-to-noise ratio (SNR) benefits over a single loop and a birdcage coil of equal radius by factors of 3.2 and 2.6 in the gastrocnemius and by 2.5 and 2.0 in the soleus muscle.The performance of the coil in terms of B1 (+) and achievable SNR allows for spatially localized dynamic (31) P spectroscopy studies in the human calf. The associated higher specificity with respect to nonlocalized measurements permits distinguishing the functional responses of different muscles.

The purpose of this paper is to analyze distribution of surface charge density on DC-carrying conductor. A new numerical analysis method, based on finite element method, is proposed in this paper. Basically the method consists of two steps: first is to calculate inside field of conductor and second is to calculate outside field. Knowing the charge distribution on the conductor surface helps better understanding of the current in conductor and will be useful for extracting parasitic circuit parameters and modeling on-chip interconnects etc.

Purpose To investigate intracranial microvascular images with transceiver radio-frequency (RF) coils at ultra-high field 7 T magnetic resonance imaging (MRI). Materials and methods We designed several types of RF coils for the study of 7 T magnetic resonance angiography and analyzed quantitatively each coil's performance in terms of the signal-to-noise ratio (SNR) profiles to evaluate the usefulness of RF coils for microvascular imaging applications. We also obtained the microvascular images with different resolutions and parallel imaging technique. Results The overlapped 6-channel (ch) transceiver coil exhibited the highest performance for angiographic imaging. Although other multi-channel coils, such as 4- or 8-ch, were also suitable for fast imaging, these coils performed poorly in homogeneity or SNR for angiographic imaging. Furthermore, the 8-ch coil was poor in SNR at the center of the brain, while it had the highest SNR at the periphery. Conclusion The present study has demonstrated that the overlapped 6-ch coil with large-size loop coils provided the best performance for microvascular imaging or angiography with the ultra-high-field 7 T MRI, mainly because of its long penetration depth together with high SNR.

We have developed and evaluated a monopole antenna array that can increase sensitivity at the center of the brain for 7T MRI applications.We have developed a monopole antenna array that has half the length of a conventional dipole antenna with eight channels for brain imaging with a 7T MRI. The eight-channel monopole antenna array and conventional eight-channel transceiver surface coil array were evaluated and compared in terms of transmit properties, specific absorption ratio (SAR), and sensitivity. The sensitivity maps were generated by dividing the SNR map by the flip angle distribution.A single surface coil provides asymmetric sensitivity resulting in reduced sensitivity at the center of the brain. In contrast, a single monopole antenna provides higher sensitivity at the center of the brain. Moreover, the monopole antenna array provides uniform sensitivity over the entire brain, and the sensitivity gain was 1.5 times higher at the center of the brain compared with the surface coil array.The monopole antenna array is a promising candidate for MRI applications, especially for brain imaging in a 7T MRI because it provides increased sensitivity at the center of the brain.

Recent studies have shown that thermal therapy by means of warm waterbaths and sauna has beneficial effects in chronic heart failure. However, a comprehensive investigation of the hemodynamic effects of thermal vasodilation on coronary arteries has not been previously undertaken. In this study, we studied the effect of a warm footbath (WFB) on coronary arteries in patients with coronary artery disease (CAD), as well as any adverse effect.We studied 21 patients (33.3% men, mean age 60.8 ± 13.5 years) with CAD. Coronary flow Doppler examination of the left anterior descending coronary artery and coronary flow reserve (CFR) were performed and measured using adenosine before and after a WFB.Systolic and diastolic blood pressure and heart rate did not change with the WFB. Mean velocity of diastolic coronary flow significantly increased (diastolic mean flow velocity: 18.3 ± 7.1 cm/sec initial, 21.5 ± 8.0 cm/sec follow-up, P = 0.002) and CFR significantly improved (1.6 ± 0.4 vs. 2.2 ± 0.5, P0.001) after WFB. The WFB was well accepted and no relevant adverse effects were observed. The change of CFR after WFB correlated well with diastolic function (E', r = 0.51, P = 0.031; E/E', r =-0.675, P = 0.002).A WFB significantly improved CFR without any adverse effects in patients with mild-to-moderate CAD and can be applied with little risk of a coronary artery event if appropriately performed.

Luminescent near-infrared (NIR) CdTe/CdSe QDs were synthesized and encapsulated in poly(lactic-co-glycolic acid) (PLGA) nanospheres to prepare stable and biocompatible QDs-loaded nanospheres for in vivo imaging. QDs were encapsulated with PLGA nanospheres by a solid dispersion method and optimized to have high fluorescence intensity for in vivo imaging detection. The resultant QDs-loaded PLGA nanospheres were characterized by various analytical techniques such as UV-Vis measurement, dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). Finally, we evaluated toxicity and body distribution of QDs loaded in PLGA nanospheres in vitro and in vivo, respectively. From the results, the QDs loaded in PLGA nanospheres were spherical and showed a diameter range of 135.0-162.3 nm in size. The QD nanospheres increased their stability against photooxidation and photobleaching, which have the high potential for applications in biomedical imaging. We have also attained non-invasive in vivo imaging with light photons, representing an intriguing avenue for obtaining biological information by the use of NIR light.

The purpose of this study was to analyze human lenticulostriate arteries (LSAs) obtained non-invasively by 7.0-T MRI. A three-dimensional time-of-flight (3D TOF) magnetic resonance angiography (MRA) technique was used with an investigational 7.0-T MRI scanner with a radio-frequency coil that was optimized and designed for angiographic purposes. We obtained images from 16 healthy volunteers (8 males and 8 females, mean age 21 +/- 2.7 years). For direct comparison of LSA images with digital subtraction angiography (DSA), we also obtained 7.0-T MRA and DSA images from one patient, a 27-year-old woman with a posterior fossa arteriovenous malformation (AVM). We then analyzed the characteristics of LSAs using a custom data analysis method with MatLab for quantitative analysis. Analysis of LSA images included shape and number of branches and origins, findings that are essential and useful for quantification of LSA abnormalities in both healthy controls and patients. Ultra-high-field MRA provided clear anatomic delineation of the LSAs, thereby suggesting that 7.0-T MRA may be a promising technique for microvascular imaging of the LSAs.

We propose a new type of functional imaging in magnetic resonance imaging (MRI), a functional MR angiography (fMRA). As it is known, arterial responses during neural activities have been studied in animals, but little is known about the human brain in-vivo. Proposed fMRA at ultra-high field strength, 7.0 Tesla (T), has a potential for a direct visualization of vascular responses of those blood vessels related to the neural activity during the tasks, such as the hand movement or checker board stimulation, that is, fMRA. The results of this paper clearly indicate that there is the possibility that one can directly observe the vascular changes in individual blood vessels related to the tasks in human brain in-vivo, similar to fMRI.

Background: Achilles tendon thickness (ATT) has been associated with increased cardiovascular risk in patients with familial hypercholesterolemia (FH). The aim of this study is to establish the correlation among ATT, obesity and established cardiovascular risk factors such as diabetes mellitus, hypertension, coronary artery disease, peripheral artery disease, smoking, and dyslipidemia. Methods: In total, 19 patients (male 31.5%, mean age 60.0±12.5) with dyslipidemia and 96 control (male 64.6%, mean age 62.3±8.5) were enrolled. ATT was measured by ultrasonography. Anterioposterior diameter which represents the ATT was measured bilaterally, 4 cm above the insertion of Achilles tendon to the tuber calcite. Dyslipidemia was defined as elevated total cholesterol, triglyceride, or LDL cholesterol, or low levels of HDL cholesterol. Results: There was no significant differences including ATT between the two groups (for ATT, dyslipidemia group, 0.44±0.04 vs control, 0.45±0.02 cm, p=0.783). There was no significant correlation between ATT and other cardiovascular risk factors except weight (r=0.34, p=0.007) and body mass index (r=0.63, p