Search

Iridium nanoparticles are important catalysts for several chemical and energy conversion reactions. Studies of iridium nanoparticles have also been a key for the development of kinetic models of nanomaterial formation. However, compared to other metals such as gold or platinum, knowledge on the nature of prenucleation species and structural insights into the resultant nanoparticles are missing, especially for nanoparticles obtained from IrxCly precursors investigated here. We use in situ X-ray total scattering (TS) experiments with pair distribution function (PDF) analysis to study a simple, surfactant-free synthesis of colloidal iridium nanoparticles. The reaction is performed in methanol at 50 °C with only a base and an iridium salt as precursor. From different precursor salts─IrCl3, IrCl4, H2IrCl6, or Na2IrCl6─colloidal nanoparticles as small as Ir∼55 are obtained as the final product. The nanoparticles do not show the bulk iridium face-centered cubic (fcc) structure but show decahedral and icosahedral structures. The formation route is highly dependent on the precursor salt used. Using IrCl3 or IrCl4, metallic iridium nanoparticles form rapidly from IrxClyn- complexes, whereas using H2IrCl6 or Na2IrCl6, the iridium nanoparticle formation follows a sudden growth after an induction period and the brief appearance of a crystalline phase. With H2IrCl6, the formation of different Irn (n = 55, 55, 85, and 116) nanoparticles depends on the nature of the cation in the base (LiOH, NaOH, KOH, or CsOH, respectively) and larger particles are obtained with larger cations. As the particles grow, the nanoparticle structure changes from partly icosahedral to decahedral. The results show that the synthesis of iridium nanoparticles from IrxCly is a valuable iridium nanoparticle model system, which can provide new compositional and structural insights into iridium nanoparticle formation and growth.

Spinel iron oxide nanocrystals (NCs) have been reported to have atomic-level core and surface structural features that differ from those of the bulk material. Recent advances in a continuous growth synthesis of metal oxide NCs make it possible to prepare a series of NCs with subnanometer control of size with diameters below 10 nm that are well-suited for investigating size-dependent structure and reactivity. Here, we study the evolution of size-dependent structure in spinel iron oxide and determine how nanoscale structure influences the growth of NCs. We synthesized spinel iron oxide NCs via a continuous growth method that permits layer-by-layer control of size in order to monitor nanoscale structure over 16 core sizes between 3 and 10 nm. X-ray total scattering data were collected and analyzed with pair distribution function (PDF) analysis in order to refine quantitative structural features including cation occupancies that could be used to detect changes both in the oxidation state and the presence of tetrahedrally coordinated cation vacancies in the NCs. We find that the average iron oxidation state increases as core diameters decrease from 8 down to 3 nm. The trend in iron oxidation state can be explained by the oxidation of surface layers in the NCs. For samples exposed to air for several weeks, oxidation appears to cease when a volume equivalent to that of an ∼1.3 nm shell is converted to the more oxidized maghemite. The number of tetrahedrally coordinated cation vacancies also increases as the NC core size decreases. The correlation between the number of these vacancies and the faster growth for smaller NCs suggests that these reactive vacancies may be responsible for the rapid growth observed for nanocrystals with diameters smaller than 8 nm.

Most studies on iron oxide nanocrystals (NCs) suggest that the magnetic properties depend strongly on size for diameters below 10 nm, but there is less agreement about how the structure of the NC surface influences magnetic properties. Because the magnetic properties of iron oxide NCs hold promise for applications from cancer detection and therapeutics to environmental remediation, it is imperative to understand how size influences those properties. In most cases, the effective magnetic size is significantly lower than the measured physical size, a finding attributed to spin canting or disorder at the NC surface. A complicating factor is that the reaction conditions used to produce samples influence their magnetic properties. Thus, we employed a continuous growth method involving layer-by-layer addition of precursor to produce single-crystalline, spherical cores with subnanometer precision over a range of sizes under the same reaction conditions. Analysis of the NCs by small-angle X-ray scattering, transm...

Materials such as trans-Fe(DMeOPrPE)2(X)(H2O)+ (DMeOPrPE = 1,2-[bis(dimethoxypropyl)phosphino]ethane; X = Cl or H) show considerable promise as sorbents for the removal of N2 from natural gas in a pressure swing process. One problem, however, is that in long-term tests these sorbents slowly degrade over a period of many weeks. This study probed the degradation mechanism for the purpose of finding ways to stabilize the sorbents. To investigate the likelihood of degradation initiated by Fe–P bond dissociation, the fluxional behavior of the related cis-Fe(DMeOPrPE)2(H)2 complex was investigated by variable temperature 1P{1H} NMR spectroscopy. Analysis of the spectra gave the following activation parameters for the fluxional process: ΔH‡ = 11.6 kcal/mol and ΔS‡ = −9.2 cal/mol K. These results suggest that Fe–P bond dissociation (20–45 kcal/mol) is not occurring in the fluxional process and by implication that Fe–P bond dissociation is not initiating the decomposition of the trans-Fe(DMeOPrPE)2(X)(H2O)+ sorbents. Consequently, macrocycle ligands may not be the best approach for stabilizing the sorbents, as we have previously proposed. A “tetrahedral jump” mechanism is proposed for the fluxional process in cis-Fe(DMeOPrPE)2(H)2.

IR scene generators are devices that simulate the IR radiation seen by heat seeking devices and IR detectors. Since the tracking accuracy is essential to heat seeking operation, a realistic high-resolution image is required. Current thermal RI scene generators use resistor array technology to generate an image whose size is on the order of 25mm square. We are building a 600mm X 600mm IR display systems with a scanned laser heating system for devices requiring a larger image size. Three high-powered CO 2 lasers are raster-scanned over a thin kapton screen. Rapid modulation of the laser coordinated with the scanning produces a pixilated heated image that emits IR energy. The system is composed of a background heating system with two laser each scanning a 128 X 64 array and a hotspot heating system with one laser scanning a 40 X 40 array. The background system is fixed over the entire screen and simulates environmental IR while the hotspot system can be scanned anywhere on the screen and simulates a target. Convective cooling is used to increase spatial resolution and temporal response. An IR camera provides closed loop optical feedback for the system.

The development of nanomaterials often relies on wet-chemical synthesis performed in reflux setups using round-bottom flasks. Here, an alternative approach to synthesize nanomaterials is presented that uses glass tubes designed for NMR analysis as reactors. This approach uses less solvent and energy, generates less waste, provides safer conditions, is less prone to contamination, and is compatible with high-throughput screening. The benefits of this approach are illustrated by an in breadth study with the synthesis of gold, iridium, osmium, and copper sulfide nanoparticles.