Search

Summary: Wireless sensor networks (WSNs) are used to monitor the real‐time parameters of remote/restricted access areas of automation industries which are tightly sealed. In such scenarios, the main challenge is signal transmission in sealed environments. An omnidirectional radiation pattern is preferred as a control link for receiving packets or periodic updates from its neighbouring nodes. However, the gain and directivity of omnidirectional antenna should be sufficient enough to transfer the data to the collecting node. This paper proposes a high‐gain horizontally polarised omnidirectional radiation pattern planar antenna resonating at the 2.45 GHz. The developed microstrip planar antenna offers a very simple and compact structure printed on either side of FR4 epoxy substrate (ε = 4.4) suitable for WSN nodes. A printed dipole director is arranged orthogonally and offers horizontal polarisation. A pair of parasitic elements is placed parallel to dipole radiators to improve the total gain of the antenna. A parallel pair of parasitic elements is placed on an inclination of 45° in antenna design plane for uniform distribution of surface current to achieve the omnidirectional antenna. The symmetrical structure of the radiating element on either side of the substrate avoids the design of the traditional balun structure to reduce the complexity of feeding network. The developed antenna is simulated, fabricated, measured and tested using WSN. The measured radiation (directivity = 3.9 dBi) is maximum at Ⴔ = 0° and Ⴔ = 90°. The frequency response of the antenna indicates a −10 dB fractional bandwidth of 380 MHz (2.24 GHz–2.62 GHz). The measured far‐field response shows a stable average gain of 3.9 dBi over the ISM band. The real‐time received signal strength indicator (RSSI) of the antenna installed in the sensor node observed a success rate of 79.46% with a transmission error of 10%. The observed response of an antenna makes it well‐suitable for WSN in industrial automation. [ABSTRACT FROM AUTHOR]

This paper investigates the possibilities of using carbon fiber as an inductor material by analyzing its inductive properties. Various shapes such as rectangular, spiral, helical, and cylindrical line structures have been simulated under various constraints using simulation software. Hardware implementations were also tested and both simulation and hardware results show that carbon fibers have the potential to replace copper inductor lines. The implemented spiral inductor pro duced a quality factor of 40 while pro ducing an inductance of 4 nH at 1.2 GHz frequency. [ABSTRACT FROM AUTHOR]

Heavy metal in excess quantity is one of the major inorganic pollutants in water. It causes several hazards to human life and ecosystem. It exists in traces in most of the commonly available drinking water sources from lakes, ponds, wells, etc., However, their presence in treated water is relatively significant. As the treated water is primarily used for agricultural purposes, it is necessary to monitor and measure their concentration. This requires sensing of metals in aqueous medium with good sensitivity and stability. Recently, nanosensors coupled with electrochemical transducer is preferred for analyzing heavy metal in aqueous solutions. In this work, Silver oxide‐bismuth oxy bromide coated with nafion is proposed as an electrochemical sensor for detection of heavy metal ions in aqueous solution. Cyclic voltammetry (CV) behavior of the proposed electrode is observed in different electrolytes. Further, Differential Pulse Voltammetry (DPV) study shows that current increases with trace nickel and copper metal ions of different concentration. Further, machine learning (ML) algorithms such as Naïve Bayes, ANN, SVM and decision trees are employed for nickel ions to train the cyclic voltammetry data and evaluate its performance. Naïve Bayes algorithm provides the best accuracy of 93.2% among all the models. [ABSTRACT FROM AUTHOR]