Search

A quasi-Z-source network is used to boost the DC bus voltage of a voltage source two-level H-bridge inverter to increase the voltage gain. With the increase in the DC bus voltage, the common mode voltage (CMV) also increases. The CMV is reduced using virtual space vector pulse width modulation (SVPWM). Due to the presence of a quasi-Z-source network, the expression of the CMV changes significantly with respect to the conventional voltage source two-level H-bridge inverter fed from a pure DC supply. In this paper, a detailed analysis of the origin of the CMV for the quasi-Z-source two-level H-bridge inverter is presented. Additionally, it is shown how the CMV is affected for a DC input supply taken from a three-phase diode bridge rectifier. The work also details the scheme for suitable placement of shoot-through time intervals required for boosting within the non-active time intervals in virtual SVPWM. The simulation and experimental results show the scheme is effective in increasing the voltage gain and reducing the CMV arising at the third harmonic of the desired output frequency by at least 33.33%.

Minimisation of AC grid side input power factor angle for a ‘matrix converter (MC)’ improves the efficiency of the grid. Input volt-ampere requirement is minimum if the current drawn by the ‘MC’ is sinusoidal and input displacement power factor (IDPF) is unity. A MC is inherently capable of maintaining a unity displacement power factor (UDPF) angle at its input terminals. However, the input currents drawn from the grid are not sinusoidal. The high-frequency ripples are suppressed by input current filters (ICFs).These filters additionally introduce a leading phase angle for the current which varies with the loading. This phase lead can be compensated by adjusting the angle between the input current space vector and the input voltage space vector of the MC. The computation of this adjustment angle depends on the estimation of power losses in the switching devices. A simple method is proposed in this paper to estimate the switching losses without measuring device voltages and currents using the perturbation technique. The perturbation logic depends on input current, instantaneous active and reactive power computed at regular intervals of time. The proposed method effectively minimises the IDPF angle very close to zero. The experimental results are included for validation,

The presence of low frequency components in the common mode voltage can cause harmful electromagnetic interference. A critical study on various causes of low frequency components in the common mode voltage of a space vector pulse width modulated Quasi–Z– source three–phase H–bridge voltage source inverter fed from a three–phase diode bridge rectifier is presented in this paper. The Quasi–Z–source network is utilized in boosting the rectified dc voltage which increases the overall voltage gain. The study considers the effect of boosting on the low frequency components. The input three-phase diode bridge rectifier has its influence in modulating the instantaneous common mode voltage and contributes low frequency components. The unbalanced three-phase supply can contribute additionally ac supply frequency component in the common mode voltage. The major contribution of this paper is the analytical, simulated and experiment-based study on various causes of the low frequency common mode voltages due to the combined action of the input non-ideal three phase grid, the front-end diode bridge rectifier as well as the load-end Z-source H-bridge three-phase inverter feeding a three-phase inductive load, while operated through a space vector pulse width modulation strategy.

High-power synchronous motor drives are usually fed from naturally commutated cycloconverters. The output voltage of the cycloconverter contains interharmonics/subharmonics which affect the power quality and restrict the allowable frequency range. Further, a practical circulating current-free cycloconverter usually gives rise to stator current discontinuities. The present paper deals with a simulation method to study the performance of a cycloconverter-fed synchronous motor drive in the presence of interharmonics/subharmonics taking into account the discontinuities in the output current as well as the effect of ripple in the output current on the input current of the cycloconverter. Interharmonics in output phase voltage, output phase current, input supply current, and the field current are estimated and verified with experimental results on a laboratory prototype. The significant oscillating torque components due to these interharmonics are identified in a typical case. The simulation results are useful in power quality studies for such drives and in devising methods for suppression of these interharmonics/subharmonics. Index Terms--Cycloconverter, interharmonics, power quality, simulation, subharmonics, synchronous motor.

A novel method of on-line detection and frequency-selective feedback to suppress the subharmonic frequency components in a naturally commutated cycloconverter is described. Simulation results show significant reduction of these components over a wide range of frequency and load power factor angle. The scheme also includes a loop for compensating the voltage distortion due to discontinuous current in a practical noncirculating-type cycloconverter. Index Terms - Cycloconverter, subharmonic distortion, subharmonic suppression.

The article presents comments related to the article "The Power Quality Impact of Cycloconverter Control Strategies." The authors did non include THD, impact on distribution transformer and impact on communicator lines in the study of power quality. The load has been considered as an adjustable frequent current source.