124 results on '"Syrtanov, M. S."'
Search Results
2. The High-Temperature In Situ Synchrotron Study of the Structural-Phase Transformations in 3D-Printed Ti–6Al–4V and Ti–5Al–3Mo–V Titanium Alloys
3. Structure and Stability of High Entropy CrMnFeCoNiCu Alloy
4. Formation of a Zr+ZrxNy+(Zr+TiBSiNi)N+(TiBSiNi)N Gradient-Layered Coating Based on Physical and Tribotechnical Characteristics of Constituent Layers
5. Thermal Cyclic Tests of TiAlC/YAlO Coating Deposited onto γ-TiAl Alloy Surface
6. Al–Cr/Y–Al–O Layer Coating Oxidation on Ti–Al–Nb Intermetallic Alloy During Heating and Thermal Cycles
7. Physical and Mechanical Properties of CrN/AlN Coating Obtained by Vacuum-Arc Deposition with Alternative Separation of Hard Substance Flows
8. Hydrogen Decrepitation of NdFeB End-of-Life Magnets with the Preliminary Three-Step Surface Cleaning
9. The Influence of the Electron Beam Treatment on Metal Nanopowders
10. In Situ Study of Hydrogen Accumulation in the E110 Zirconium Alloy during Gas-Phase Hydrogenation by the Methods of Thermal Desorption Spectroscopy and Synchrotron X-Ray Diffraction Analysis
11. High-Temperature Oxidation of a Zr–1Nb Alloy with a Protective Cr/Ta Coating
12. Structural and Phase Stability of the Pd-Plated Preceramic Paper-Derived Ti3(Al, Si)C2–TiC Composite at Elevated Temperatures: In-Situ X-Ray Diffraction Investigation
13. Study of Structure-Phase Transformations during Hydrogen Desorption by a VT1-0 Titanium Alloy and an E110 Zirconium Alloy
14. Comparison of Properties of the ZrN Mononitride Coating and (Zr + Ti–B–Si–Ni)N Multicomponent Coating Obtained by Vacuum-Arc Plasma-Assisted Deposition
15. Ceramic Coatings Based on Chromium and Aluminum Nitrides Obtained by Vacuum-Arc Plasma-Assisted Evaporation
16. ZrO2/Cr Multilayer Coating for the Protection of E110 Zirconium Alloy from High Temperatures
17. Advanced Heat-Resistant Y–Al–O and Ti–Al–C Coatings
18. Effect of Coating Stoichiometry and Annealing on Phase Composition of Y–Al–O Compounds
19. Phase Transformations in Nitrided Ferrovanadium under the Action of a High Power Carbon Ion Beam
20. Formation of a Zr+ZrxNy+(Zr+TiBSiNi)N+(TiBSiNi)N Gradient-Layered Coating Based on Physical and Tribotechnical Characteristics of Constituent Layers.
21. Sintering of MAX-phase materials by spark plasma and other methods
22. Physical and Mechanical Properties of CrN/AlN Coating Obtained by Vacuum-Arc Deposition with Alternative Separation of Hard Substance Flows
23. Beam Current Effect on Microstructure and Properties of Electron-Beam-Melted Ti-6Al-4V Alloy
24. Effect of the Beam Current during the Electron-Beam Melting of Titanium Alloy Ti–6Al–4V on the Structural Features and Phase Transitions in Gas-Phase Hydrogenation
25. Structural Changes in С36 Laves Phase Intermetallic Compound TiCr2 During Hydrogenation–Dehydrogenation Process
26. The Synthesis Method of Intermetallic Alloys Based on Ti–Cr with C14 and C36 Laves Phases for Hydrogen Storage
27. Influence of Plasma-Immersion Titanium-Ion Implantation on the Kinetics of Hydrogen Penetration into E110 Zirconium Alloy
28. Structural and Phase Stability of the Pd-Plated Preceramic Paper-Derived Ti3(Al, Si)C2–TiC Composite at Elevated Temperatures: In-Situ X-Ray Diffraction Investigation.
29. ZrO2/Cr Multilayer Coating for the Protection of E110 Zirconium Alloy from High Temperatures.
30. Thermochemical Synthesis of Sialon Using Low-Temperature Plasma Radiation and a Bright Pulsed Beam of a Powder Mixture of AlN and Si3N4.
31. Properties of Molybdenum Films Produced by High-Power Impulse Magnetron Sputtering
32. Magnetron-sputtered La0.6Sr0.4Co0.2Fe0.8O3 nanocomposite interlayer for solid oxide fuel cells
33. Influence of the plasma-immersion ion implantation of titanium on the structure, morphology, and composition of the surface layer of Zr–1Nb alloy
34. Effect of bias potential on the structure and distribution of elements in titanium-nitride coatings obtained by cathodic-arc deposition
35. Local structure of titanium nitride-based coatings
36. Effect of Molybdenum Texture on the High-Temperature Oxidation Resistance of Zr–1Nb Alloy with a Cr/Mo Coating.
37. Formation of titanium interlayer by vacuum arc deposition to increase the durability of titanium nitride coatings under thermal cycling conditions
38. Formation of gradient porous composites from preceramic papers with Ti3SiC2 powder filler
39. Oxidation features of sintered SiC composites deposited on E110 alloy at 1200 °c in air for fuel cladding studies
40. High-temperature mechanical properties of preceramic paper-derived Ti3Al(Si)C2composites obtained by spark plasma sintering
41. Sintering of MAX-phase materials by spark plasma and other methods
42. Influence of preceramic paper composition on microstructure and mechanical properties of spark plasma sintered Ti3SiC2-based composites
43. Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper
44. Ultrasonic tomography of SiC-based materials synthesized by spark plasma sintering of preceramic paper
45. Synthesis of Ti3SiC2-based composites by spark plasma sintering of preceramic papers
46. High-temperature oxidation resistance of Ti-implanted E110 alloy
47. Heat treatment of the Ti-6Al-4V alloy manufactured by electron beam melting
48. Microstructure and properties of Ti-6.5Al-3.5Mo-1.5Zr-0.3Si parts produced by electron beam melting
49. Introduction of hydrogen into titanium by plasma methods
50. Structure and mechanical properties of the Zr–Nb–H system alloys after pulsed electron beam exposure
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.