Search

Here we describe the novel, multi-point Comet Interceptor mission. It is dedicated to the exploration of a little-processed long-period comet, possibly entering the inner Solar System for the first time, or to encounter an interstellar object originating at another star. The objectives of the mission are to address the following questions: What are the surface composition, shape, morphology, and structure of the target object? What is the composition of the gas and dust in the coma, its connection to the nucleus, and the nature of its interaction with the solar wind? The mission was proposed to the European Space Agency in 2018, and formally adopted by the agency in June 2022, for launch in 2029 together with the Ariel mission. Comet Interceptor will take advantage of the opportunity presented by ESA's F-Class call for fast, flexible, low-cost missions to which it was proposed. The call required a launch to a halo orbit around the Sun-Earth L2 point. The mission can take advantage of this placement to wait for the discovery of a suitable comet reachable with its minimum Δ V capability of 600  ms - 1 . Comet Interceptor will be unique in encountering and studying, at a nominal closest approach distance of 1000 km, a comet that represents a near-pristine sample of material from the formation of the Solar System. It will also add a capability that no previous cometary mission has had, which is to deploy two sub-probes - B1, provided by the Japanese space agency, JAXA, and B2 - that will follow different trajectories through the coma. While the main probe passes at a nominal 1000 km distance, probes B1 and B2 will follow different chords through the coma at distances of 850 km and 400 km, respectively. The result will be unique, simultaneous, spatially resolved information of the 3-dimensional properties of the target comet and its interaction with the space environment. We present the mission's science background leading to these objectives, as well as an overview of the scientific instruments, mission design, and schedule., Competing Interests: Competing InterestsThe authors declare no competing interests., (© The Author(s) 2024.)

During 2019, an infrared camera, the compact thermal imager (CTI), recorded 15 million images of the Earth from the International Space Station. CTI is based on strained-layer superlattice (SLS) detector technology. The camera covered the spectral range from 3 to 11 µm in two spectral channels, 3.3-5.4 and 7.8-10.7 µm. Individual image frames were 26×21 k m 2 projected on the ground, with 82 m pixel resolution. A frame time of 2.54 s created continuous image swaths with a 13% along-track image overlap. Upper limits determined on the ground and in flight for the electronic offset, read noise, and dark current demonstrated the stability of the SLS detector and camera over many months. Temperature calibration was established using a combination of preflight and in-flight measurements. A narrowband approximation of temperature as a function of photon counts produced an analytic relationship covering a temperature range of 0°-400°C. Examples of CTI images illustrate temperature retrievals over sea ice, urban and agricultural areas, desert, and wildfires.

Laser Induced Breakdown Spectroscopy (LIBS) in the Ultra Violet/Visible/Near-IR (UVN) spectral range is a powerful analytical tool that facilitates the interpretation of Raman spectroscopic data by providing additional details in elemental chemistry. To acquire the complete information of molecular vibrations for more accurate and precise chemical bonding and structural analysis, an ideal in situ optical sensing facility should be able to rapidly probe the broad vibrational dipole and polarizability responses of molecules by acquiring both Raman scattering and mid-IR emission spectroscopic signatures. Recently, the research team at Brimrose has developed a novel optical technology, Long-Wave IR (LWIR) LIBS. Critical experimental approaches were made to capture the infrared molecular emission signatures from vibrationally excited intact samples excited by laser-induced plasma in a LIBS event. LWIR LIBS is the only fieldable mid-IR emission spectroscopic technique to-date that that offers the same instrumental and analytical advantages of both UVN LIBS and Raman spectroscopy in in-situ stand-off field applications and can perform rapid and comprehensive molecular structure analysis without any sample-preparation.•A single excitation laser pulse is used to trigger both UVN and LWIR spectrometers simultaneously.•Time-resolved UVN-LWIR LIBS measurements showed the evolution of both atomic and molecular signature emissions of target compounds in the laser-induced plasma.•The technique was applied to the characterization of mineral and organic compounds in planetary analog samples., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2022 The Authors.)

Raman spectroscopy and laser induced breakdown spectroscopy (LIBS) are complementary techniques that together can provide a comprehensive characterization of geologic environments. For landed missions with constrained access to target materials on other planetary bodies, discerning signatures of life and habitability can be daunting, particularly where the preservation of organic compounds that contain the building blocks of life is limited. The main challenge facing any spectroscopy measurements of natural samples is the complicated spectra that often contain signatures for multiple components, particularly in rocks that are composed of several minerals with surfaces colonized by microbes. The goal of this study was to use the combination of Raman spectroscopy and LIBS to discern different environmental regimes based on the identification of minerals and biomolecules in rocks and sediments. Iceland is a terrestrial volcano-glacial location that offers a range of planetary analog environments, including volcanically active regions, extensive lava fields, geothermal springs, and large swaths of ice-covered terrain that are relevant to both rocky and icy planetary bodies. We combined portable VIS (532 nm) and NIR (785 nm) Raman spectroscopy, VIS micro-Raman spectroscopic mapping, and UV/VIS/NIR (200 - 1000 nm) and Mid-IR (5.6 - 10 μm, 1785 - 1000 cm -1 ) laser induced breakdown spectroscopy (LIBS) to characterize the mineral assemblages, hydrated components, and biomolecules in rock and sediment samples collected from three main sites in the volcanically active Kverkfjöll-Vatnajökull region of Iceland: basalt and basalt-hosted carbonate rind from Hveragil geothermal stream, volcanic sediments from the base of Vatnajökull glacier at Kverkfjöll, and lava from the nearby Holuhraun lava field. With our combination of techniques, we were able to identify major mineral polytypes typical for each sample set, as well as a large diversity of biomolecules typical for lichen communities across all samples. The anatase we observed using micro-Raman spectroscopic mapping of the lava compared with the volcanic sediment suggested different formation pathways: lava anatase formed authigenically, sediment anatase could have formed in association with microbial weathering. Mn-oxide, only detected in the carbonate samples, seems to have two possible formation pathways, either by fluvial or microbial weathering or both. Even with our ability to detect a wide diversity of biomolecules and minerals in all of the samples, there was not enough variation between each set to distinguish different environments based on the limited measurements done for this study., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier B.V. All rights reserved.)

A systematic calibration approach is presented to correlate the digital output of an infrared camera and the scene temperature. Aided by the optoelectronic properties of the camera, as few as two experimental data points are needed to establish this correlation. This approach can readily include the effects of atmospheric transmission, scene emissivity, and different background subtractions. Hence, the temperature conversion in flight can be reliably obtained from laboratory calibration. The conversion function can also be used to identify the camera's thermal sensitivity and temperature resolution, which are important information in different space missions. In applying this calibration procedure to a laboratory camera and the compact thermal imager onboard the International Space Station, its validity is confirmed.

NASA's EPOXI mission observed the disc-integrated Earth and Moon to test techniques for reconnoitering extrasolar terrestrial planets, using the Deep Impact flyby spacecraft to observe Earth at the beginning and end of Northern Hemisphere spring, 2008, from a range of ∼1/6 to 1/3 AU. These observations furnish high-precision and high-cadence empirical photometry and spectroscopy of Earth, suitable as "ground truth" for numerically simulating realistic observational scenarios for an Earth-like exoplanet with finite signal-to-noise ratio. Earth was observed at near-equatorial sub-spacecraft latitude on 18-19 March, 28-29 May, and 4-5 June (UT), in the range of 372-4540 nm wavelength with low visible resolving power (λ/Δλ=5-13) and moderate IR resolving power (λ/Δλ=215-730). Spectrophotometry in seven filters yields light curves at ∼372-948 nm filter-averaged wavelength, modulated by Earth's rotation with peak-to-peak amplitude of ≤20%. The spatially resolved Sun glint is a minor contributor to disc-integrated reflectance. Spectroscopy at 1100-4540 nm reveals gaseous water and carbon dioxide, with minor features of molecular oxygen, methane, and nitrous oxide. One-day changes in global cloud cover resulted in differences between the light curve beginning and end of ≤5%. The light curve of a lunar transit of Earth on 29 May is color-dependent due to the Moon's red spectrum partially occulting Earth's relatively blue spectrum. The "vegetation red edge" spectral contrast observed between two long-wavelength visible/near-IR bands is ambiguous, not clearly distinguishing between the verdant Earth diluted by cloud cover versus the desolate mineral regolith of the Moon. Spectrophotometry in at least one other comparison band at short wavelength is required to distinguish between Earth-like and Moon-like surfaces in reconnaissance observations. However, measurements at 850 nm alone, the high-reflectance side of the red edge, could be sufficient to establish periodicity in the light curve and deduce Earth's diurnal period and the existence of fixed surface units.

The EPOXI Discovery Mission of Opportunity reused the Deep Impact flyby spacecraft to obtain spatially and temporally resolved visible photometric and moderate resolution near-infrared (NIR) spectroscopic observations of Earth. These remote observations provide a rigorous validation of whole-disk Earth model simulations used to better understand remotely detectable extrasolar planet characteristics. We have used these data to upgrade, correct, and validate the NASA Astrobiology Institute's Virtual Planetary Laboratory three-dimensional line-by-line, multiple-scattering spectral Earth model. This comprehensive model now includes specular reflectance from the ocean and explicitly includes atmospheric effects such as Rayleigh scattering, gas absorption, and temperature structure. We have used this model to generate spatially and temporally resolved synthetic spectra and images of Earth for the dates of EPOXI observation. Model parameters were varied to yield an optimum fit to the data. We found that a minimum spatial resolution of ∼100 pixels on the visible disk, and four categories of water clouds, which were defined by using observed cloud positions and optical thicknesses, were needed to yield acceptable fits. The validated model provides a simultaneous fit to Earth's lightcurve, absolute brightness, and spectral data, with a root-mean-square (RMS) error of typically less than 3% for the multiwavelength lightcurves and residuals of ∼10% for the absolute brightness throughout the visible and NIR spectral range. We have extended our validation into the mid-infrared by comparing the model to high spectral resolution observations of Earth from the Atmospheric Infrared Sounder, obtaining a fit with residuals of ∼7% and brightness temperature errors of less than 1 K in the atmospheric window. For the purpose of understanding the observable characteristics of the distant Earth at arbitrary viewing geometry and observing cadence, our validated forward model can be used to simulate Earth's time-dependent brightness and spectral properties for wavelengths from the far ultraviolet to the far infrared. Key Words: Astrobiology-Extrasolar terrestrial planets-Habitability-Planetary science-Radiative transfer. Astrobiology 11, 393-408.

Living systems produce more than 90% of Earth's atmospheric methane; the balance is of geochemical origin. On Mars, methane could be a signature of either origin. Using high-dispersion infrared spectrometers at three ground-based telescopes, we measured methane and water vapor simultaneously on Mars over several longitude intervals in northern early and late summer in 2003 and near the vernal equinox in 2006. When present, methane occurred in extended plumes, and the maxima of latitudinal profiles imply that the methane was released from discrete regions. In northern midsummer, the principal plume contained approximately 19,000 metric tons of methane, and the estimated source strength (>/=0.6 kilogram per second) was comparable to that of the massive hydrocarbon seep at Coal Oil Point in Santa Barbara, California.