Search

Three new Ewald series are derived using a new strategy that does not start with a proposed charge spreading function. Of these, the Ewald series produced using shifted potential interactions for the Ewald real space series converges relatively slowly, while the corresponding expression using a shifted force (SF) interaction does not converge. A comparison is made between several approximations of the Ewald method and the SF route to include Coulomb interactions in molecular dynamics (MD) computer simulations. MD simulations of a model bulk molten salt and water were carried out. The recently derived α′ variant of Ewald, by K. D. Hammonds and D. M. Heyes [J. Chem. Phys. 157, 074108 (2022)], has been developed analytically and found to be more accurate and computationally efficient than SF in part due to the smaller real space truncation distance that can be used. In addition, with α′, the number of reciprocal lattice vectors required is reduced considerably compared with the standard Ewald implementations to give the same accuracy. The invention of the α′ method shifts the computational balance back toward using an Ewald construction. The SF method shows greater errors in the Coulomb pressure and time dependent fluctuation properties compared to α′. It does not conserve the shadow Hamiltonian in a microcanonical MD simulation, whereas the α′ method does, which facilitates long time stability and insignificant drift of properties over time. The speed of the Ewald computer code is improved by using a new lookup table method. [ABSTRACT FROM AUTHOR]

Four decades of research into the influences of time pressure on risky decisions have produced widely contrasting findings: 38.5% of the effects indicate that time pressure increases risk preferences, whereas 61.5% show the opposite. A theoretical framework with four conceptual categories of moderators is proposed to explain these heterogeneous findings: nature of the time constraint, negative outcome salience, negative outcome severity, and vulnerability to the outcomes. This framework is tested through a meta-analysis of 213 effect sizes reported in 83 papers, representing 65,574 unique respondents. The four categories of moderators effectively resolve notable conflicts. For example, regarding the nature of the time constraint, an absolute versus relative constraint increases risk preferences, but an ambiguous versus objective constraint decreases risk preferences. In terms of negative outcome salience, risk preferences decrease if the risk is learned about from a description (vs. experience) or the outcome is framed as a loss (vs. gain). Negative outcome severity also exerts an effect, as discrete choices lower risk preferences compared with attitudinal risk. In addition to managerial and public policy implications based on simulations, a comprehensive research agenda that builds on the robust insights of this meta-analysis is offered. [ABSTRACT FROM AUTHOR]

Parenting motivation, the inspiration and drive to take care of one's children, is a powerful instinct for facilitating human reproduction. In a set of hypotheses, the authors address how, why, and among whom parenting motivation affects a pervasive decision-making tendency, namely, variety seeking. Six studies, including a large-scale panel data study and five online and lab studies, show that, when shopping, parenting motivation spurs feelings of time crunch that result in less variety seeking among consumers. The effect is diminished when time-saving parenting support exists (which reduces feelings of time crunch in parenting), when consumers are led to believe that they have sufficient time available for shopping, and when they do not have much loyalty to any brand offered in the choice set and thus cannot save time by simply choosing the top-of-mind product option. The current research thus contributes to the growing literature on how parenting motivation affects consumer decision making. In addition, it augments the literature on variety seeking by identifying an important factor that can influence it. [ABSTRACT FROM AUTHOR]

The vibration of pedestrian overbridges due to train-induced wind loads (TIWLs) during the passage of a high-speed train threatens the overbridge safety and causes pedestrian discomfort. To incorporate the structural dynamic magnification effect on overbridges under TIWLs in the design process, a framework to calculate the structural dynamic response, equivalent static TIWLs and response spectra of overbridges is established. A new simplified TIWL model with a "three-segment" wind pressure time history described by harmonic functions is proposed. This model facilitates the acquisition of analytical solutions for the structural dynamic response, streamlining the analysis process. The dynamic response and equivalent static TIWLs based on dynamic magnification factors (DMFs) of overbridges are obtained from the analytical method. The DMFs are primarily affected by the structural natural frequency and the characteristic frequency of TIWLs. Furthermore, based on the analytical solution of the overbridge dynamic response, parametric analysis is performed, and the response spectra representing the dynamic displacement and acceleration of overbridges are developed. The response spectra can be used to quickly calculate the displacement, internal force, and acceleration of the overbridges during engineering applications, which is more convenient but slightly less accurate than the analytical method. [ABSTRACT FROM AUTHOR]

This study utilized eye-tracking techniques to investigate decision-making behavior in intertemporal loss scenarios under both time pressure and no time pressure conditions. Results revealed shorter decision-making times and decreased large later (LL) option selection frequency under time pressure. Participants under time pressure exhibited reduced Mean Fixation Duration (MFD) and Search Measure (SM) values, indicating altered information processing. Mediation analyses confirmed that task choice outcomes were influenced by SM and MFD, suggesting a shift towards heuristic decision-making under time pressure. [ABSTRACT FROM AUTHOR]

Background: Strong research capacity and culture (RCC) within professional groups predict engagement in high-quality research and the integration of evidence into practice. However, factors affecting RCC participation and development are currently unknown in Australian Orthopaedic Surgeons. Study design: Cross-sectional survey. Methods: All Australian Orthopaedic Association members were invited to complete the individual domain of the validated Research Capacity and Culture tool. Results: One hundred and sixty-three Australian Orthopaedic Association members (9%) provided survey answers. Survey findings indicated that AOA members scored moderate or high for most RCC domains (14 out of 15). Barriers to the completion of research included a lack of time, other work roles taking priority, and a lack of funds for research. Conclusion: The Australian Orthopaedic Association members surveyed in this study demonstrated adequate research skills and experience, although reported they could benefit from additional support securing funding and navigating specific research tasks. Increasing future collaboration with academic institutions and clinician-researcher roles may enhance the output of high-quality orthopaedic research in Australia. [ABSTRACT FROM AUTHOR]

Computer-based learning has gained popularity in recent years, providing learners greater flexibility and freedom. However, these learning environments do not consider the learner's mental state in real-time, resulting in less optimized learning experiences. This research aimed to explore the effect on the learning experience of a novel EEG-based Brain-Computer Interface (BCI) that adjusts the speed of information presentation in real-time during a learning task according to the learner's cognitive load. We also explored how motivation moderated these effects. In accordance with three experimental groups (non-adaptive, adaptive, and adaptive with motivation), participants performed a calibration task (n-back), followed by a memory-based learning task concerning astrological constellations. Learning gains were assessed based on performance on the learning task. Self-perceived mental workload, cognitive absorption and satisfaction were assessed using a post-test questionnaire. Between-group analyses using Mann-Whitney tests suggested that combining BCI and motivational factors led to more significant learning gains and an improved learning experience. No significant difference existed between the BCI without motivational factor and regular non-adaptive interface for overall learning gains, self-perceived mental workload, and cognitive absorption. However, participants who undertook the experiment with an imposed learning pace reported higher overall satisfaction with their learning experience and a higher level of temporal stress. Our findings suggest BCI's potential applicability and feasibility in improving memorization-based learning experiences. Further work should seek to optimize the BCI adaptive index and explore generalizability to other learning contexts. [ABSTRACT FROM AUTHOR]

Introduction: High email load has been associated with impaired well-being because emails impose specific demands, disturb the workflow, and thereby overtax individuals' action regulation toward prioritized goals. However, the causes and well-being-related consequences of email load are not yet well understood, as previous studies have neglected the interaction type and function of emails as well as co-occurring stressors as antecedents of high email load and have relied predominantly on cross-sectional designs. Methods: In two studies, we aimed to clarify the nature of email load through the lens of action regulation theory. The first study, a two-wave investigation with a fortnightly interval, examined the lagged relationships among email load, work stressors, strain, and affective well-being. The sample included 444 individuals across various occupations and organizations, with 196 of them working from home or remotely at least part of the time. In the second cross-sectional study, we surveyed 257 individuals using a convenience sampling approach, 108 of whom worked from home or remotely at least partially. This study focused on evaluating how different email classes--distinguished by email interaction type (received vs. processed) and email function (communication vs. task)--serve as predictors of high email load. Results: In Study 1, we found a positive lagged effect of high email load on strain, even when controlling for the co-occurring stressors time pressure and work interruptions. In addition, lagged effects of email load on time pressure and interruptions were identified, while no evidence was found for the reverse direction. The results of Study 2 suggest that only the number of communicationrelated emails received, but not the number of task-related emails received, or the number of all emails processed contribute to high email load. Conclusion: Findings suggest that email load can be considered a unique stressor and that different classes of email need to be distinguished to understand its nature. Clarifying the sources of email load can help develop effective strategies to address it. [ABSTRACT FROM AUTHOR]

Translation abstract From demolition to replacement, the Hahnwald bridge in NiedernhausenThe new replacement construction in the route of the L 3027 is a road bridge over eleven railway tracks in the city centre of Niedernhausen with a span of 73 m. The planning was carried out under great time pressure, because the existing bridge had to be decommissioned before its remaining service life due to a pier misalignment and a replacement was urgently needed for traffic reasons. Due to the changes in design demanded by the safety requirements of the Deutsche Bahn (DB), the bridge was designed as a tied‐arch bridge (with an overhead supporting structure). In addition to the adaptation of the structure to the state‐of‐the‐art, a cycle lane was added to the road cross‐section. The superstructure was produced from single elements carried to an assembly site about 600 m above the village of Niedernhausen. In early 2023 took place the transport of the about 600 t of the heavy steel construction through the village of Niedernhausen and finally the launching to its final position with the help of an intermediate support. The time‐period between the demolition and launching of the new tie‐arch bridge lasted from September 2021 to June 2023. This report covers the period from the challenges posed to maintenance management of the existing bridge to the planning of the new replacement structure, construction and opening to traffic. [ABSTRACT FROM AUTHOR]

Objective: In Africa, the treatment outcomes of lupus nephritis (LN) are not well known. This is especially true in the current era where contemporary treatment options are more widely available. This retrospective study aimed to measure the outcomes of biopsy-proven LN treated at the Livingstone Tertiary Hospital (LTH) Renal Unit in Gqeberha (formerly Port Elizabeth), South Africa and to identify predictors of a poor outcome. Methods: A retrospective cohort study of 131 patients with biopsy-proven LN who had a kidney biopsy between 01 January 2012 to 31 December 2021 as identified from the biopsy register. A sub-analysis of 107 patients with proliferative and/or membranous LN was performed. Results: Mean age was 31.4 ± 12.7 years with a female predominance of 86.3%. At 6-month follow-up, 69.6% of patients had complete or partial response to treatment. This increased to 70.3% and 72.6% at 18 and 30 months, respectively. Twenty-seven patients were lost to follow-up, while 7 (5.3%) patients progressed to kidney failure (KF). There were 3 (2.3%) deaths. Predictors of poor response were an elevated baseline serum creatinine (OR = 2.53, 95% CI 0.99 – 6.52, p =.054), a decreased eGFR (OR = 2.92, 95% CI 0.94 – 9.09, p =.065) and an elevated blood pressure (OR = 6.06, 95% CI 1.11 – 33.33, p =.038) at the time of biopsy. Infections were the most common adverse event with 50 infections seen in 39 (29.8%) patients. Herpes viral infections were frequently noted (n = 12) accounting for 24.0% of all documented infections. Conclusion: Response rates were similar in this cohort when compared to other contemporary studies. Predictors of poor response were an elevated baseline serum creatinine, a decreased eGFR and an elevated blood pressure at time of the biopsy. Infections were the most common occurring adverse event, although the mortality rate remained low at 2.3%. [ABSTRACT FROM AUTHOR]

To adapt teaching to the prerequisites of students, teachers have various options at their disposal to gather and process information as the basis to form a judgment, such as carrying out tests, talking to and observing the behavior of students, or administering tasks. The complexity of such a judgment arises from the multitude of observations and their different possible explanations. This complexity might be reduced when teachers focus on one hypothesis instead of considering multiple hypotheses, interpret information in a confirmatory way, and not collect diagnostically relevant information. However, in this way, they run the risk of undesirable biased judgments. It therefore seems important to improve diagnostic judgments by selecting and processing information in a more reflective way. Research indicates that if information on a student is not easily available but restricted (e.g., by time pressure, difficult access to the student or high effort), a teacher who wants to make a careful decision is forced to rely on more reflective processes in the selection of tasks and in the interpretation of solutions. The present experimental study therefore investigates how the restricted availability of information in a specific diagnostic situation—when diagnostically inexperienced prospective mathematics teachers determine misconceptions in decimal fractions—influences the underlying cognitive processes. We assume that restricting the availability of information on student behavior augments the attentional focus and therefore reduces cognitive biases. Such more reflective processing can be observed by an increased time spent per piece of information, which should lead to the processing of relevant information and further increase judgment accuracy. To investigate these hypotheses, prospective teachers without prior knowledge in diagnosing misconceptions (N = 81) were asked to diagnose misconceptions on decimal fractions of virtual students by collecting information on students’ solutions. Data concerning the effects of restricting the availability of information on teachers’ cognitive processes were analyzed. The results show that with restricted information, participants indeed select a greater proportion of diagnostically relevant tasks, which positively influences judgment accuracy. These results are discussed with respect to their significance for framing teacher training and for further research. [ABSTRACT FROM AUTHOR]

This research focuses on utilizing injection moulding to assess defects in plastic products, including sink marks, shrinkage, and warpages. Process parameters, such as pure cooling time, mould temperature, melt temperature, and pressure holding time, are carefully selected for investigation. A full factorial design of experiments is employed to identify optimal settings. These parameters significantly affect the physical and mechanical properties of the final product. Soft computing methods, such as finite element (FE), help mitigate behaviour by considering different input parameters. A CAD model of a dashboard component integrates into an FE simulation to quantify shrinkage, warpage, and sink marks. Four chosen parameters of the injection moulding machine undergo comprehensive experimental design. Decision tree, multilayer perceptron, long short-term memory, and gated recurrent units models are explored for injection moulding process modelling. The best model estimates defects. Multiple objectives particle swarm optimisation extracts optimal process parameters. The proposed method is implemented in MATLAB, providing 18 optimal solutions based on the extracted Pareto-Front. [ABSTRACT FROM AUTHOR]

Backgrounds: This study delves into the risk perceptions of Italian pediatricians concerning climate change's impact on children's health. Given children's heightened vulnerability to climate-related health risks, comprehending these perceptions is crucial. A review of pertinent literature establishes the framework, emphasizing six key factors influencing children's susceptibility to climate-related health hazards. Methods: Methodologically, the study utilized a survey tool developed collaboratively with the Italian Society of Pediatrics (SIP), garnering responses from a representative sample of Italian pediatricians. Results: Findings indicate a high level of awareness among respondents regarding climate change and its health implications, with a majority attributing it primarily to human activity. Pediatricians recognize various current and anticipated health impacts of climate change, notably concerning illnesses linked to outdoor air quality. Despite acknowledging their role in addressing climate-related health concerns, respondents also cite barriers to engagement, including time constraints and knowledge gaps. However, they express interest in resources like professional training and policy statements to bolster their capacity for effective communication and advocacy. Conclusions: Comparisons with prior studies highlight the consistency of findings across diverse contexts and underscore the significance of integrating climate and environmental health education into medical training. Overall, this study sheds light on pediatricians' perspectives in tackling the convergence of climate change and children's health, pinpointing avenues for enhancing their involvement in climate advocacy and mitigation efforts. [ABSTRACT FROM AUTHOR]

Previous studies have implied that stress is a risk factor for depression, but relatively little is known about how healthy individuals' stress dynamically affects depression as a mood in daily life. Therefore, an ecological momentary assessment study was conducted among 141 college students to test the temporal dynamic effect of daily perceived stress on depression and the underlying mediating and moderating role of rumination. Perceived stress, state rumination, and depression were measured using self‐compiled questionnaire three times a day over 12 days. Trait rumination was measured with the Nolen‐Hoeksema Ruminative Response Scale. Hierarchical linear models with HLM 7.0 were adopted to examine the mediation and moderation effects. In the mediation model, the greater the daily perceived stress at time t, the higher the state rumination at time t + 1, and state rumination at t + 1 positively predicted college students' depression at t + 2. In the moderation model, trait rumination significantly facilitated perceived stress‐induced depression. These results verified that daily perceived stress could affect college students' depression directly or indirectly through the critical mediating mechanism of state rumination, and this effect would be exacerbated with a higher level of trait rumination. [ABSTRACT FROM AUTHOR]

European Portuguese (EP) is a language with unpredictable stress. Previous behavioral studies have shown that without vowel reduction EP adult speakers displayed a stress deafness effect akin to that observed in speakers of fixedstress languages, suggesting that vowel quality may be the primary cue for stress discrimination in EP. However, an event-related potentials (ERPs) study reported that EP adults were able to discriminate stress contrasts pre-attentively in the absence of vowel quality cues. These results seemed to indicate that EP adult speakers may attend to different cues in the attentive and pre-attentive stress perception. Moreover, both the behavioral and ERPs studies have revealed a processing advantage for iambic stress, which could not be predicted by the rhythmic properties of EP, the language-specific weighting of stress correlates, or the frequency distributions of trochaic and iambic stresses in EP. A recent eye-tracking study has found that EP-learning infants at 5-6 months already exhibited an iambic preference in the absence of vowel reduction, manifested by longer looking time at the iambic stress. The present study used a passive oddball paradigm to examine pre-attentive stress perception without vowel quality cues by 5-to-7-month-old EP-learning infants. Results from twentytwo participants showed that both the trochaic and iambic conditions yielded a positive discrimination response (p-MMR). In addition, the iambic condition elicited a prominent late discriminative negativity (LDN) as well as a P3a component. Our findings present the first evidence for reciprocal discrimination of stress patterns in EP-learning infants, showing that, as in adult speakers, stress processing might also differ at the pre-attentive and attentive stages in infants. Importantly, the stress perception ability in EP-learning infants seems to develop asymmetrically, with an advantage for the iambic stress pattern. The present study highlighted the role of language-specific factors that may affect developing stress perception. [ABSTRACT FROM AUTHOR]

The objective of this study was to study the impact of pressing time on the microstructure of goat cheese and its relationship with sensory attributes. The microstructure of the artisanal cheeses was performed by scanning electron microscopy and image analysis. The validation of the microstructural complexity was carried out experimentally with sensory attributes. The pressing time influenced the microstructural parameters Feretmax, Geodiam, and τ and the cheese type influenced the parameters Feretmax, Geodiam, and Geoelong. The correlation values between microstructural complexity and sensory attributes were 0.85 and 0.84 for fresh cheeses and matured cheeses, respectively. The pressure times of 12 and 18 h resulted in cheese microstructures with the highest complexity in terms of Feretmax, Geodiam, Geoelong, and τ parameters. The obtained results are supported by the correlation values between microstructural complexity and sensory attributes. [ABSTRACT FROM AUTHOR]

The purpose of this research study is to describe the factors that influence consumers' purchasing decisions in live shopping broadcasts. The proposed research methodology is based on the qualitative paradigm with an interpretative approach. A semi-structured questionnaire is applied to interview 25 people who had participated in live shopping transmissions at least once. The results show eight families codes: (1) motivation, (2) participation, (3) trust, (4) influence of social networks, (5) time pressure, (6) customer satisfaction, (7) distrust and problems, and (8) quality of service. The aesthetic aspect of the seller and the endorsement of a celebrity have no valorization. In conclusion, the purchase decision variables of live shopping broadcasts do not differ significantly with respect to what has been found in previous literature. [ABSTRACT FROM AUTHOR]

The COVID-19 pathogen led to a fast expanding pandemic because it proved lethal in certain populations but could be transmitted by persons who appeared healthy. As a result, researchers came under unprecedented time pressure to develop a vaccine. This case study focuses on the first COVID-19 vaccine, which was approved for use in humans, known as Comirnaty, the BioNTech-Pfizer COVID-19 vaccine or Vaccine BNT162b2. With the benefit of hindsight, we show how close collaboration with regulators and trust-based decisions meant that the race for a COVID-19 vaccine was won without purposefully infecting healthy participants with an infectious agent that can cause severe illness or death and for which no rescue therapy had existed. [ABSTRACT FROM AUTHOR]

Neural action potentials (APs) are difficult to interpret as signal encoders and/or computational primitives. Their relationships with stimuli and behaviors are obscured by the staggering complexity of nervous systems themselves. We can reduce this complexity by observing that "simpler" neuron-less organisms also transduce stimuli into transient electrical pulses that affect their behaviors. Without a complicated nervous system, APs are often easier to understand as signal/response mechanisms. We review examples of nonneural stimulus transductions in domains of life largely neglected by theoretical neuroscience: bacteria, protozoans, plants, fungi, and neuron-less animals. We report properties of those electrical signals—for example, amplitudes, durations, ionic bases, refractory periods, and particularly their ecological purposes. We compare those properties with those of neurons to infer the tasks and selection pressures that neurons satisfy. Throughout the tree of life, nonneural stimulus transductions time behavioral responses to environmental changes. Nonneural organisms represent the presence or absence of a stimulus with the presence or absence of an electrical signal. Their transductions usually exhibit high sensitivity and specificity to a stimulus, but are often slow compared to neurons. Neurons appear to be sacrificing the specificity of their stimulus transductions for sensitivity and speed. We interpret cellular stimulus transductions as a cell's assertion that it detected something important at that moment in time. In particular, we consider neural APs as fast but noisy detection assertions. We infer that a principal goal of nervous systems is to detect extremely weak signals from noisy sensory spikes under enormous time pressure. We discuss neural computation proposals that address this goal by casting neurons as devices that implement online, analog, probabilistic computations with their membrane potentials. Those proposals imply a measurable relationship between afferent neural spiking statistics and efferent neural membrane electrophysiology. [ABSTRACT FROM AUTHOR]

The instability failure of engineering rock mass is caused by the full development of cracks under the combined action of the surrounding rock stress environment and frequent stress disturbance. The development and propagation of cracks is essentially a process of cumulative rock damage and progressive failure. Taking the rock damage induced by crack development under multistage stress disturbance as the theme, combined with the engineering site, this work carried out multistage stress disturbance tests considering disturbance amplitude, time and initial stress factors, aiming at exploring damage mechanism of rock at each disturbance factor and the characteristics of microscopic crack development. The increase of various disturbance factors reduce the peak strength and average elastic modulus of the rock, and increase the axial strain increment at each disturbance stage, which weakens the mechanical properties of the rock. The microcracks development presents a process of "local convergence of microcracks to form damage zone, continuous development of microcracks to expand damage zone, propagation of damage zone to form fracture zone, propagation of fracture zone to form macroscopic fracture surface". Furthermore, the increase of the disturbance factors promotes crack development and expansion and induces the generation of tensile cracks. The established acoustic emission (AE) Qt value can reflect the development of microscopic cracks within the rock in real time and is negatively correlated with the rock damage state, which can be used as an index for quantitative evaluation of rock damage. The research results can provide some reference and guidance for the monitoring and evaluation of engineering rock mass damage. Highlights: Conduct multistage stress disturbance tests of sandstone under triaxial compression. Analyze the effect of amplitude, time and initial stress on the mechanical behavior of rock. Explore the fracture characteristics and AE damage characteristics of sandstone. Reveal the damage and microscopic crack mechanism of rock under disturbance factor. [ABSTRACT FROM AUTHOR]

This study analyzed the impact of driving environments (real-world and simulated world) and driving conditions (no time pressure and time pressure) on speed compliance and speed adaptation. Professional car drivers were recruited, and the data was collected in real-world and simulated world under no time pressure and time pressure driving conditions. The comparison results using Wilcoxon-signed rank test showed that speed compliance and speed adaptation were not consistently significant and were not in the same direction highlighting the influence of various factors like road features and driver characteristics. The generalized linear mixed model results showed that speed compliance was relatively better in simulated world (by 3.98 kmph) than real-world. Further, speed adaptation under time pressure was about 5.86 kmph lower during real-world as compared to simulated world. The findings from this study can provide new insights on road safety strategies and policy implications for limiting speeding-related crash risks. [ABSTRACT FROM AUTHOR]

The grouting method is commonly used to seal rock fissures in subsea tunnels, and therefore the water and mud inrush can be prevented in this way. However, the current understanding of the grout diffusion mechanism inside the rock fissure under seawater conditions is still limited, especially inside the inclined rock fissure. This study first presented a novel rock fissure geometry schematization, which can be simplified to a single fissure with different inclinations. Then, based on the obtained time-varying grout viscosity under seawater conditions, the grout diffusion model of cement and sodium silicate grout (C-S grout) was developed by combining the equilibrium equation, constitutive equation, and continuity equation, which can be used to calculate the key parameters involved in rock fissure grouting, i.e., the grouting pressure and grout diffusion distance. After that, the change of grouting pressure with time was obtained. Furthermore, the numerical simulation of grouting in the inclined rock fissure was performed to verify the suitability of the grout diffusion model, and the comparison between them shows that they match reasonably well with each other. It is hoped that the conclusions could aid in the design of grouting in rock fissures around subsea tunnels with C-S grout in the future. HIGHLIGHTS: A novel rock fissure geometry schematization is presented. The C-S grout diffusion model in the inclined rock fissure under seawater is developed. The effect of time-varying viscosity on grout diffusion under seawater conditions is studied. The relation between the grouting pressure and grout diffusion distance is obtained. The numerical simulation of grouting in the inclined rock fissure is performed. [ABSTRACT FROM AUTHOR]

The results of an experimental and kinetic modeling study of the ignition of H 2 - CO - O 2 - Ar mixtures behind the reflected shock wave are reported. The experiments were performed with test mixtures containing 0.75 - 3.0 % H 2 , 0 % - 3.0 % CO , and 1.5 % O 2 in argon at temperatures from 950 to 1650 K and a total gas concentration of ∼ 10 - 5 mol / cm 3 . The reaction was monitored by recording the time evolution of the pressure behind the reflected shock wave, intensity of the chemiluminescence of electronically excited OH* radicals at 308.0 ± 2.0 nm, and the absorption by ground-state OH radicals at a 306.772-nm bismuth atomic line. The measured parameters were the time τ 1 it took to reach a ground-state OH concentration of 2.0 × 10 - 9 mol / cm 3 and the time τ 2 to reach the maximum OH* emission intensity. Kinetic simulations demonstrated that τ 1 corresponds to the beginning of fuel consumption, and τ 2 to the time for most of the fuel to be consumed. Therefore, the process of ignition was treated as consisting of two stages: the induction period τ 1 and the burnout time τ 2 - τ 1 . These two time intervals demonstrate different sensitivity to the elementary reactions of the kinetic mechanism. A numerical model capable of predicting the effects of the presence of hydrocarbon impurity, oxygen vibrational relaxation, and pressure rise was used to simulate the experiment. The best agreement between experimental and theoretical results is achieved when these additional factors are taken into account. In addition to the sensitivity coefficient analysis for identifying the most important reactions, a new criterion, referred to as the relative integrated production, was proposed, which compliments the sensitivity coefficient analysis through its ability to identify the most productive reactions. [ABSTRACT FROM AUTHOR]

Objectives: In this study, the project team was interested in learning from Wisconsin farmers and farm families about: (1) the unique stressors farmers face, (2) the barriers that exist for farmers to seek help for mental and physical health, and (3) coping strategies that could be implemented to help farm families cope with stress. Methods: The project team collected qualitative data utilizing standardized questions during three focus groups held via Zoom. The 10 participants were from various Wisconsin farm enterprises including dairy, beef, and produce farms. Data were coded into five codes: stressors, farmers as a unique subculture, barriers to seeking help, coping strategies, and strategies for addressing barriers to seeking help. Results: Participants emphasized the need for healthcare professionals to better understand farming is more than a job; it is their life. The top stressor was time pressure and the top barrier to seeking care was workload, which make it challenging to get off the farm. Stigma and self-reliance are additional barriers in the farming community. Participants offered strategies to address these barriers, including learning how to effectively communicate with farmers and raising awareness of mental health issues in rural communities. Conclusion: The insights from this study can inform rural healthcare professionals on strategies to better support the mental and physical well-being of farmers and their families in Wisconsin and rural communities in the United States. [ABSTRACT FROM AUTHOR]

Summary: Introduction: Approximately 1% of the UK population take oral corticosteroids for ≥ 28 days each year, for broadly two reasons: deficiency in corticosteroid requiring replacement; or therapeutic corticosteroid for inflammatory conditions. Acute deficiency can occur at times of physiological stress (e.g. surgery), potentially leading to major complications. The Association of Anaesthetists' 2020 consensus guideline provides detailed advice for the management of glucocorticoids during the peri‐operative period for patients with adrenal insufficiency. This national audit aimed to assess compliance with this guideline. Methods: Data were collected from 59 Trusts over 14 consecutive days for all eligible patients undergoing procedures under the care of an anaesthetist. Patients who were prescribed ≥ 5 mg oral prednisolone equivalents pre‐operatively, in whom supplementary corticosteroid would be indicated, were compared with those prescribed < 5 mg oral prednisolone equivalents. Results: Operations for 21,731 patients were audited: 277 (1.3%) patients were taking therapeutic corticosteroids. Detailed peri‐operative data were collected for all patients receiving therapeutic corticosteroids: 201/277 (73%) were ASA physical status ≥ 3; 184/277 (66%) underwent elective procedures; and 252/277 (91%) were prescribed prednisolone pre‐operatively, of whom 219/277 (79%) were prescribed ≥ 5 mg oral prednisolone equivalents. In the patients who were prescribed ≥ 5 mg oral prednisolone equivalents, 186/219 (85%) received pre‐operative glucocorticoid supplementation and 97/219 (42%) received it postoperatively; however, only 67/219 (31%) and 43/219 (20%) respectively received glucocorticoid supplementation according to the guidelines. Overall, peri‐operative prescribing was compliant in 19/219 (9%) patients. A similar proportion, 30/219 (14%), received no supplementation. In the patients taking < 5 mg oral prednisolone equivalents pre‐operatively, 28/58 (48%) received inappropriate supplementation. Conclusions: Despite 125/277 (45%) of anaesthetists reporting Association of Anaesthetists' guidelines use, compliance remained low, with adherence in only 27/125 (22%) patients. Further research is required to identify the correct peri‐operative strategy for patients taking therapeutic corticosteroids. [ABSTRACT FROM AUTHOR]

Collaborative robots, or cobots, offer a unique combination of productivity and flexibility that has led to significant growth in adoption over the past decade. Moreover, recently, there has been a shift towards a human-centered design of the workspace, known as one of the drivers of Industry 5.0, which prioritizes the well-being of operators. To achieve this, various human factors such as ergonomics, mental workload, personal skills, and capabilities need to be considered in the workspace design, and their impact on system productivity must be evaluated. The integration of a human and a cobot in the same workplace can affect the performance of the human operator, as the perception of the cobot can impact their work. This highlights the importance of taking human factors into account, as a lack of consideration in these aspects has contributed to the failure of many implementations. To link the objectives of productivity, flexibility, and human factors consideration, a dynamic real-time multi-objective task allocation strategy for collaborative assembly systems is developed. This approach considers the different characteristics of the resources and optimizes for two objectives, makespan, and energy expenditure of the operator. By using this approach, it is possible to modify the behavior of the cobot by reallocating tasks between the two resources based on the operator's current needs. In other words, if the operator appears too stressed due to time constraints or their energy rate level is too high, some of their assigned tasks can be transferred to the cobot. This helps to maintain a balanced system while reducing the operator's stress. [ABSTRACT FROM AUTHOR]

Copyright of Machine Tool & Hydraulics is the property of Guangzhou Mechanical Engineering Research Institute (GMERI) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Machine Tool & Hydraulics is the property of Guangzhou Mechanical Engineering Research Institute (GMERI) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: To evaluate the effect of being under time pressure on procedural performance using hand motion analysis. Materials and Methods: Eight radiology trainees performed central venous access on a phantom while recording video and hand motion data using an electromagnetic motion tracker. Each trainee performed the procedure six times: the first three trials without any prompts (control), while for the next three, they were asked to perform the task as fast as possible (time pressure). Validated hand motion metrics were analyzed, and two blinded and independent evaluators rated procedural performance using a previously validated task-specific global rating scale (GRS). Motion/time ratios and linear mixed-effect methods were used to control for time, and constants for both strategies were compared. Results: Hand motion analysis showed that trainees completed the simulated procedure faster under time pressure (46 ± 18 s vs. 56 ± 27 s, p = 0.008) than during the control strategy. However, when controlling for time, trainees moved their hands 79 more centimeters (p = 0.04), made 15 more translational movements (p = 0.003) and 18 more rotational movements (p = 0.01) when under time pressure compared to at their own pace. Conclusion: Although trainees could perform the procedure faster under time pressure, there was a deterioration in hand motion economy and smoothness. This suggests that hand motion metrics offer a more comprehensive assessment of technical performance than time alone. [ABSTRACT FROM AUTHOR]

Most decision-making models, including the pairwise comparison method, assume the honesty of the decision-maker. However, it is easy to imagine a situation where the decision-maker tries to manipulate the ranking results. This problem applies to many decision-making methods, including the pairwise comparison method. This article proposes three simple algorithmic methods for manipulating data using the pairwise comparison method. The proposed solutions try to mimic the behavior of a dishonest decision-maker who, acting under time pressure, chooses a simple strategy that leads to pushing through a given alternative. We also test the susceptibility to detection of the proposed manipulation strategies. To this end, we propose a convolutional neural network architecture, which we train based on generated data consisting of the original random pairwise comparison matrices and their manipulated counterparts. Our approach treats the pairwise comparison matrices as two- or three-dimensional images specific to the decision situation. In the latter case, the matrices are initially transformed into a three-dimensional map of local inconsistencies, and only data processed in this way are subjected to analysis using neural networks. The experiments indicate a significant level of detection of the proposed manipulations. In numerical tests, the effectiveness of the presented solution ranges from 88% to 100% effectiveness, depending on the tested algorithm and test parameters. The measured average computation time for the single case analyzed oscillated below one millisecond, which is a more than satisfactory result of the performance of the built implementation. We can successfully use the neural networks trained on synthetic data to detect manipulation attempts carried out by real experts. Preliminary tests with respondents also indicated high effectiveness in detecting manipulation. At the same time, they signaled the difficulty of distinguishing actual manipulation from a situation in which an expert strongly prefers one or more selected alternatives. [ABSTRACT FROM AUTHOR]

Coal seam water injection is the most basic and effective dust control technology used on the coal mining face. Numerical simulations are helpful for predicting the humidity range of coal seam water injection. The results can provide guidance for the field design of coal seam water injection process parameters. In order to understand the influence of coal seam water injection pressure and water injection time on the coal seam wetting effect, this paper uses the Fluent 17.0 software system to study the process parameters of the coal seam water injection seepage process under different conditions. It is found that in the process of coal seam water injection, with the increase in water injection pressure and the prolongation of water injection time, there is a specific threshold value for the change in coal seam permeability. Only when the water injection pressure and time increase to the threshold value will the permeability of the coal seam be significantly enhanced and the wetting effect improved. The pressure threshold of the mine is 15 MPa–20 MPa, and the time threshold is the first 42 h. [ABSTRACT FROM AUTHOR]

Informal advice relations across units in an organization are beneficial for knowledge sharing and problem solving. Prior research suggests that despite their benefits, there are costs to informal advice relations across units. However, the mechanisms by which these costs are mitigated remain unclear. We theorize that this lack of clarity is because work factors have not been sufficiently considered. We examine one such work factor, specifically time pressure, and develop a cost-based explanation for how time pressure influences cross-unit advice relationships. We investigate two time-pressure levels. In the first, work is conducted under lower time pressure, and there is less likelihood of a negative outcome. In the second, work is conducted under higher time-pressure conditions, and there is a greater likelihood of a negative outcome. We theorize that under lower time-pressure conditions, the costs of advice relations across units are mitigated by reciprocal advice relationships. However, under higher time pressure, the cost of informal advice relations across units is higher owing to the need for quick coordination of advice, and these costs are mitigated by reciprocal advice relationships in conjunction with cross-unit formal workflow relationships. To test our hypotheses, we examine the informal advice network and formal workflow network in lower and higher time-pressure conditions among 118 members of the Information Technology and Systems division of a Formula One racing team. Our results indicate that under lower time-pressure conditions, reciprocal advice ties are sufficient to overcome costs. However, under higher time-pressure conditions, cross-unit advice ties are facilitated by reciprocal advice ties embedded in the workflow ties between units. Thus, our findings have implications for how knowledge is managed and how problems are solved in organizations. [ABSTRACT FROM AUTHOR]

This paper describes the Data Domotopia a 2300 + respondent self-administered web-based survey. It includes 100 + multi-purpose items about home-making and stillness in a moving world. We suppose that home-making can reveal coping strategies and resilience practices to make everyday life work – as home is a central location in people's activity-travel patterns. To describe this phenomenon, the concept of Domotopia is introduced, defining how people arrange, use, and experience their homes to cope with the pathologies of accelerated and liquid modernity (Bauman 2005). While the Data Domotopia is based on a mixed-method combining qualitative and quantitative material, this paper focuses mainly on the description of the questionnaire – which is organized into three interrelated layers: the dwelling, the dwellers, and the neighborhood. Each of these layers unfolds in functional, social, emotional and sensory components. The survey covers most of the contemporary issues related to home-making. This includes the domestic space and gender issues; the socio-spatial resources (mobility, action space, core, and wider social network); lifestyles, ideals, and residential aspiration; time pressures, time use, organization and stress; equipment, rules and arrangements; interpersonal relations, cohabitation and negotiation, dominance and power. Intakes on the Data Domotopia is given by two concrete cases about the time-space coverage of the habitual action space, and about inter-personal task allocation. These examples show the potential of the data to study domocentric stillness and resilience to urban pathologies. The data – aggregated to the infra-communal level – is available for research purposes. [ABSTRACT FROM AUTHOR]

With a refreshed surge of interest in alternative work schedules, such as the compressed workweek, as a tool to increase employer attractiveness, the question of the effects of such work arrangements recurs. In light of inconsistent research findings, we examined the effects of the implementation of a four-day compressed workweek on time pressure, fatigue, perceived productivity, and work-life balance within a construction company. Moreover, we investigated the effect of employee expectations. Drawing on longitudinal data (N = 247) and using Latent Change Score Modelling (LCSM), we found that work-life balance increased while fatigue and time pressure decreased. Three months after implementing a compressed work schedule, perceived productivity remained stable. These effects were contingent on individuals' expectations regarding the effect of the compressed schedule. The results highlight the importance of employee expectations in shaping the outcomes of the adoption of alternative work schedules. [ABSTRACT FROM AUTHOR]

Background: There are limited opportunities to practice surgical skills and techniques in residency. Therefore, it is important to explore strategies which optimize surgical simulation experiences to enhance learning outcomes and skill retention. Methods: Novice medical students (n = 29) were recruited to participate in a Fundamentals of Laparoscopic Surgery (FLS) peg transfer task training. Participants were randomly assigned to a control group, practicing the peg transfer task independently, or an experimental group, practicing with time pressure. Participant skill assessments were completed before the training, after the training, and 8-weeks after the training. Subjective and objective stress measurements were taken in the form of self-report surveys and heart rate variability data, respectively. Results: For all the skill assessment measurements, there was no difference between groups in performance on the FLS task. Both groups showed improvement in performance after the training compared to before. The experimental group reported higher stress during and after the training period compared to the control group; however, there was no difference between groups on heart rate variability metrics. Conclusion: Time pressure while practicing an FLS task did not significantly impact learning acquisition or retention. However, the experimental group reported higher levels of stress. This preliminary study suggests time pressure does not confer an enhanced surgical skill learning experience for novices. [ABSTRACT FROM AUTHOR]

This study investigated the number of operator errors, task completion time, and workload of subjects at different levels by imposing conditions such as focused text boldness, noise disturbance, and time pressure to simulate a realistic cloud change business process in the laboratory. Results of the study showed that the text bolding of important content reduced the number of errors, whereas noise interference increased the number of errors. Text boldness only reduced the number of corrected errors, and noise interference only increased the number of uncorrected errors. Moreover, bolding was found to have different effects on the number of errors under different noise levels and time pressure levels, with text boldness significantly reducing the number of total errors only in quiet or low time pressure states. Time pressure had no effect on cloud change task error counts, but high time pressure resulted in higher subjective workload. Practitioner Summary: Operator error is one of the main causes of service failure, and reducing operator error in cloud change operations is of practical importance. In this study, we found focused text boldness could reduce operator errors, while noise could increase the number of errors. High time pressure would lead to a high workload. [ABSTRACT FROM AUTHOR]

To address the residual stress induced during the cure of fibre reinforced thermoset polymer composites, two different approaches were suggested for coupling a non-dominated sorting genetic algorithm (NSGA-II) with finite element (FE) simulations based on a viscoelastic constitutive law. These two approaches were proposed with consideration of different ways of integrating NSGA-II and the FE model. In Approach A, NSGA-II was performed based on results from a series of simulations under various combinations of cure variables. Alternatively, Approach B employed NSGA-II to iteratively update and optimise the cure profile for subsequent simulations. Results indicated that both approaches achieved simultaneous reductions in cure time and macroscale residual stress, with Approach B showing further improvements due to the direct coupling between the NSGA-II and simulations. Specifically, the maximum residual stress and cure time optimised by Approach A were reduced by 5%–9% and 22%–50% respectively, while those obtained by Approach B were reduced by 7%–10% and 32%–49% respectively, compared to those based on the manufacturer recommended cure profile. The evolution of stress in composites based on optimised cure profiles from these two approaches was also elucidated. Additionally, microscale modelling further revealed a 3%–5% reduction in the average residual stress within a representative volume element (RVE) model was also shown, depending upon the approach adopted. Ultimately, by combining a NSGA-II and FE simulations, the optimisation of cure time and residual stress at the macroscale and cure time together with a reduction of microscale stress could be realised. [ABSTRACT FROM AUTHOR]

To study the effect of different sizes and speeds of coal gangue falling on hydraulic supports for top‐coal caving discharge hydraulic support on the bearing characteristics of the hydraulic support, the ADAMS hydraulic support rigid‐flexible coupling analysis model was established. HyperMesh is used to flexibly process the hydraulic support, and the column and jack are equivalently replaced by spring damping system. By applying step loads of different sizes and speeds to simulate the impact force generated when the coal gangue falls on different positions of the cover beam, the dynamic response characteristics of the column, balance jack and other articulation points are obtained. Analyses show that: when the impact load is closer to the roof beam, the articulation point of the roof beam‐cover beam and the balancing jack are easy to be damaged. When the same impact load is applied to the cover beam, the faster the load is applied, the hydraulic support column and balancing jack may not be able to absorb and disperse the pressure effectively in time, resulting in the articulation points being subjected to a larger impact force, which is easy to cause damage or destruction. When different sizes and speeds of impact loads are applied to the cover beam, the latter has a greater impact on the dynamic response of the front and rear connecting rod articulation points and the cover beam‐roof beam articulation point than the former, and the hydraulic bracket will be more prone to vibration, deformation, and stress concentration, thus affecting the stability and safety of the bracket. The article is of guiding significance for designing and optimizing the structure and parameters of the hydraulic support, and improving the support performance and stability of the hydraulic support in the comprehensive release working face. [ABSTRACT FROM AUTHOR]

ABSTRACT Aim Design Methods Results Conclusion Impact Patient or Public Contribution This study examines how social influence, human–machine trust and perceived job stress affect nurses' behavioural intentions towards AI‐assisted care technology adoption from a new perspective and framework. It also explores the interrelationships between different types of social influence and job stress dimensions to fill gaps in academic literature.A quantitative cross‐sectional study.Five hospitals in Taiwan that had implemented AI solutions were selected using purposive sampling. The scales, adapted from relevant literature, were translated into Chinese and modified for context. Questionnaires were distributed to nurses via snowball sampling from May 15 to June 10, 2023. A total of 283 valid questionnaires were analysed using the partial least squares structural equation modelling method.Conformity, obedience and human–machine trust were positively correlated with behavioural intention, while compliance was negatively correlated. Perceived job stress did not significantly affect behavioural intention. Compliance was positively associated with all three job stress dimensions: job uncertainty, technophobia and time pressure, while obedience was correlated with job uncertainty.Social influence and human–machine trust are critical factors in nurses' intentions to adopt AI technology. The lack of significant effects from perceived stress suggests that nurses' personal resources mitigate potential stress associated with AI implementation. The study reveals the complex dynamics regarding different types of social influence, human–machine trust and job stress in the context of AI adoption in healthcare.This research extends beyond conventional technology acceptance models by incorporating perspectives on organisational internal stressors and AI‐related job stress. It offers insights into the coping mechanisms during the pre‐adaption AI process in nursing, highlighting the need for nuanced management approaches. The findings emphasise the importance of considering technological and psychosocial factors in successful AI implementation in healthcare settings.No Patient or Public Contribution. [ABSTRACT FROM AUTHOR]

This paper examines the role of temporality in the negotiation of unplanned adaptive tasks that were part of the health system response to the Covid-19 pandemic in Colombia. While research has been carried out on the temporal aspects of emergency preparedness, we argue that there is an empirical gap concerning how health care organizations responded with temporal urgency to Covid-19. The dataset (118 interviews) from which a subset of interviews were analysed for this paper was collected during the first wave of the pandemic in Colombia in 2020. Interviewees included representatives of national and regional governments, public hospitals and private clinic managers, clinicians, including physicians and nurses, laboratory directors, and academics. Narratives of two tasks are presented: reconfiguring clinical laboratories to expand the testing capacity for Covid-19 and increasing intensive care unit capacity for patients hospitalized with Covid-19. Through thematic analysis of the navigation of these tasks, the concept of "temporal shifts", which signifies how organizations use time as a resource (analogous experiences, future projections) to negotiate unplanned service changes, is developed. This study highlights how powerful stakeholders deploy past and future projections to influence others´ perceptions in the negotiation of temporal shifts: a type of change that differs from the incremental and planned types described in previous organizational literature on temporality. This shift was initiated by rapid task delegation via organizational hierarchy, but accomplished through pressured, improvised actions at the operational level. The policy and practice implications we suggest relate to addressing social and organizational effects, including consequences for stakeholder engagement and staff wellbeing, generated by organizational leaders making decisions under "time stress". [ABSTRACT FROM AUTHOR]

The positive linear effect of proactive personality on both organizational and individual outcomes in the workplace has been widely demonstrated. However, with increasing research, the perception that being more proactive is better has aroused new concerns, such as interpersonal conflict and personal resource exhaustion. Drawing on the job demands-resources model, this study aims to examine the curvilinear effect of the proactive personality on innovative behavior through thriving at work under time pressure. A questionnaire survey was conducted at three time points with 548 frontline employees in a research and development department in western China. The findings indicated that there is an inverted U-shaped curvilinear link between proactive personality and innovative behavior as well as thriving at work, with the latter serving as a mediator in this association. Time pressure moderates the link between proactive personality and thriving at work, such that the inverted U-shaped link is strengthened under high time pressure, whereas the curve is elevated and U-shaped under low time pressure. These findings advance our deeper theoretical understanding of the "too much of a good thing" effect of proactive personality on individuals' workplace outcomes, as well as assist practitioners to better manage the advantages and disadvantages of proactive individuals, and create a thriving and innovative workforce. [ABSTRACT FROM AUTHOR]

Probabilistic evaluation of the internal pressure capacity before excessive leakage is essential for ensuring preemptive response in case of a severe accident in a prestressed concrete containment vessel (PCCV) subjected to internal pressure in a nuclear power plant. Therefore, in this study, we conducted a fragility analysis to evaluate the probabilistic internal pressure capacity for damage states before excessive leakage. Three damage states were classified, and a finite element (FE) model was developed based on the experimental test results of a 1 : 4 scale PCCV under the overpressurization condition at Sandia National Laboratory. The three damage states were determined as the onset of inelastic behavior (DS1), onset of leakage (DS2), and excessive leakage (DS3). Fragility analysis was performed using a validated FE model to consider uncertainties in material properties and prestressing force. The Latin hypercube sampling method was used to perform uncertainty quantification, and normality tests verified that the samples exhibited normal distributions. The internal pressure capacity variability in DS1 and DS2 was higher than that in DS3. DS1 is the point at which the compressive deformation caused by the prestressing force was converted into tensile deformation because of the increase in the internal pressure, which resulted in tensile concrete cracking. Furthermore, DS2 is the state in which localized damage of the liner occurred and cracks in the concrete spread. Thus, the internal pressure capacity for DS1 and DS2 exhibited high variability because of the uncertainty of the prestressing force and material properties. Moreover, the median capabilities of DS1, DS2, and DS3 were ~1.85, 2.61, and 3.45 times the design pressure, respectively. Therefore, material and structural uncertainties in nuclear power plants should be appropriately considered, and a conservative assessment of the damage state before excessive leakage should be performed for preemptive response in the case of severe accidents. [ABSTRACT FROM AUTHOR]

ABSTRACT Aim(s) Design Methods Results Conclusions Implications for the Profession Reporting Method Patient or Public Contribution Trial Registration To systematically review the existing literature and address the following research question: What are the most effective techniques used to minimise adverse effects resulting from subcutaneous injections of low‐molecular‐weight heparin among patients with cardiovascular diseases?A scoping review.A comprehensive search was conducted across multiple databases, including CINAHL, PubMed, EMBASE and the Cochrane Library, from 1 February 2014 to 31 January 2024. Participants were aged 18 years or older, diagnosed with venous thromboembolism or arterial thromboembolism and had prescribed subcutaneous injections of low‐molecular‐weight heparin. The collected data were analysed following the Joanna Briggs Institute approach, and it was organised and categorised based on the main objectives of the review.Twenty studies were eligible, including 1 best practice project, 7 randomised controlled trials and 9 quasi‐experimental studies. The techniques under investigation encompassed various aspects, including the injection site, injection duration (e.g., 30 s vs. 10 s), injection method (e.g., needle insertion angle), duration of needle withdrawal after injection, pressure application time and cold pressure. Preliminary evidence suggests that techniques such as using the abdominal site and slower injection rates may help reduce adverse effects. However, the optimal parameters for injection duration, waiting time, pressure and cold application, including the duration of these applications, remain uncertain due to limitations in sample size and heterogeneity in interventions and outcome measures across the studies.Ensuring the accurate administration of low‐molecular‐weight heparin is of utmost importance as it plays a critical role in decreasing mortality rates and minimising substantial healthcare costs linked to complications arising from incorrect administration. The findings from the current review have significantly contributed to strengthening the evidence base in this field, providing more robust and reliable information.This review emphasises the significance of implementing standardised subcutaneous injection techniques for low‐molecular‐weight heparin in patients with cardiovascular disease in order to reduce complications and enhance patient outcomes.This study followed the applicable guidelines established by the PRISMA 2020 statement. The PRISMA checklist for systematic reviews was utilised for reporting purposes.There is no patient or public contribution to declare.OSF registries: osf.io/phk72 [ABSTRACT FROM AUTHOR]

Humans display a remarkable tendency to cooperate with strangers; however, identifying prospective cooperation partners accurately before entering any new relationship is essential to mitigate the risk of being exploited. Visual appearance, as inferrable, for example, from facial images on job portals and dating sites, may serve as a potential signal of cooperativeness. This experimental study examines whether static images enable the correct detection of an individual's propensity to cooperate. Participants first played the Prisoner's Dilemma (PD) game, a standard cooperation task. Subsequently, they were asked to predict the cooperativeness of participants from a prior PD study relying solely on their static facial photographs. While our main results indicate only marginal accuracy improvements over random guessing, a more detailed analysis reveals that participants were more successful at identifying cooperative tendencies similar to their own. Despite no detectable main effect in our primary treatment variations (time pressure versus time delay), participants exhibited increased accuracy in identifying male cooperators under time pressure. These findings point towards a limited yet nuanced role of static facial images in predicting cooperativeness, advancing our understanding of non-behavioral cues in cooperative interactions. [ABSTRACT FROM AUTHOR]

Aims: This study aimed to compare the efficacy and utility of the McGrath™ videolaryngoscope, using the Macintosh-like McGrath™ MAC blade and the hyperangulated McGrath™ MAC Xblade with a conventional Macintosh blade under simulated resuscitation conditions. Methods: A prospective, randomized study under conditions mimicking ongoing chest compressions was conducted with 90 anesthesiologists. Intubation success rates, time-to-vocal cords, time-to-intubate, and time-to-ventilate were measured. Additionally, the study assessed the subjective ratings and the perceived workload using the 'NASA-task-load-index' during the procedure. Results: The overall intubation success rate was device dependent 99–100%. The McGrath™ MAC and McGrath™ MAC Xblade showed faster visualization times compared to conventional blades. The MAC blade demonstrated superior performance in time-to-intubate and time-to-ventilate compared to both conventional and MAC Xblades. Despite excellent visualization, the MAC Xblade posed challenges in tube placement, reflected in a prolonged intubation time of >120 seconds in one case. Both MAC and MAC Xblade reduced potential dental injuries and interruptions to chest compressions compared to conventional laryngoscopes. User experience significantly impacted intubation times with conventional laryngoscopes, but this effect was mitigated with videolaryngoscopy. Participants reported lower stress and effort when using videolaryngoscopes, with the MAC blade rated superior in perceived time pressure. Conclusion: The study supports the superiority of videolaryngoscopy with a Macintosh-like blade over conventional laryngoscopy during mechanical chest compressions, particularly for less experienced users. The McGrath™ MAC blade, in particular, offers advantages in intubation time, user-friendliness, and reduced stress. However, the MAC Xblade's challenges during tube placement highlight the need for further clinical validation. Continued research is essential to refine guidelines and improve resuscitation outcomes. [ABSTRACT FROM AUTHOR]

A new sintering technique as a combination of ultra-fast spark plasma sintering and high-pressure sintering was employed to densify UO 2 fuel pellets. UO 2 pellets with a relative density of 97.5 % and inhibited grain growth were fabricated at 1000 °C under 150 MPa within only 4.5 min. Both short sintering time and high pressure might explain the inhibited grain growth and hence finer microstructures. UO 2 fuel pellets prepared in this work exhibit excellent mechanical properties. [ABSTRACT FROM AUTHOR]

Since the advent of Greek philosophy, the notion that time is a more valuable resource than money has gained traction due to its perceived contrast with materialistic viewpoints. In the current study (N = 418 Indonesian undergraduates, 70.3% female, mean age 21.41 years old), we explored the extent to which the speed of time passage (i.e., time pressure and time expansion) could be an underlying mechanism between the propensity to be mindful and the personal value system of materialism. We found that trait mindfulness was associated with lower materialistic values through lower appraisal of time pressure but not through time expansion. This result was independent of the participant's level of trait self-control, which is often intertwined with studies regarding mindfulness and time passage. By not rushing to overcome the discomfort from time pressure, mindful individuals are more capable of recognizing that materialistic desires are fleeting wants that do not necessitate action. [ABSTRACT FROM AUTHOR]