Search

• Vaginal foreign bodies represent a clinical and diagnostical challenge. • Most common symptoms are vaginal discharge and vaginal blood loss. Only 10% of patients presented with the complaint of a possible foreign object. Although a minority of patients develop complications, those with a battery as a foreign object are at a higher risk of mucosal injuries. • Ultrasonography is the most utilized diagnostic method, with a sensitivity of 79.9%. Radiography showed more false-negative than true-positive results, with a sensitivity of 33.3%. • Vaginoscopy is the gold standard for definitive diagnosis and therapy, as outpatient or under anesthesia. • A possible context of sexual violence should be considered, regardless the nature of the object. Vaginal foreign bodies represent a clinical and diagnostical challenge in pediatric gynecology. Several case reports, case series and retrospective studies have been published, highlighting rare or complex cases. A comprehensive systematic review is lacking. Published English-language articles on vaginal foreign objects in patients aged 16 years and younger, with full-text availability were included. Articles on adult patients and patients with an object migrating from the abdominal cavity into the vagina were excluded. Out of the 215 screened articles 75 were included, comprising a total of 522 patients. The age ranged from 6 months to 16 years, with an average of 6 years and 3 months. The presenting symptoms were documented in 340 patients, with the two most common being vaginal bleeding (n = 172) and vaginal discharge (n = 134). Toilet paper or tissue was the most common object, in 155 out of 447 patients. Ultrasonography was the most utilized diagnostic method, with a sensitivity of 79.9 %. Radiography showed more false-negative than true-positive results, with a sensitivity of 33.3 %. Complications were reported in 35 patients. Evidence of sexual abuse was found in a small group of 16 patients. Vaginoscopy under sedation was the most frequently used therapeutic approach. A swift and accurate diagnosis is crucial, with clinical examination and ultrasonography playing pivotal roles. Vaginoscopy is the gold standard for definitive diagnosis and therapy. Attention should be given to a potential context of sexual abuse. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFASs) have been found in toilet paper in Europe, the United States, and Africa; however, their presence in Chinese household paper has not been investigated. In this study, 21 legacy and 30 emerging PFASs were analyzed in tissue and toilet paper from China, including 48 samples of different origins and materials. Median concentrations of chlorinated polyfluorinated ether sulfonates (Cl-PFESAs), hexafluoropropylene oxide homologs (HFPOs), and p-perfluorous nonenoxybenzenesulfonate (OBS) were 0.32, 0.19, and 0.10 ng/g dry weight (dw), respectively. The detection frequencies (DFs) of Cl-PFESAs and OBS both were greater than 96%, followed by hexafluoropropylene oxide trimer acid (HFPO-TrA, DF: 85%). Notably, the level of HFPO-TrA in one sample was as high as 540 ng/g dw, indicating a potential environmental risk to humans. In addition, the concentrations of Cl-PFESAs in toilet paper were significantly higher than that in tissue (p < 0.05). However, no significant differences were observed in the concentrations of PFASs in tissue and toilet paper from different materials and origins. This suggests that PFASs, particularly emerging PFASs, are widely detected in tissue and toilet paper products across China, and their presence is a potential source of landfill contamination and human exposure.

Sensitizers are used to prepare photosensitive materials for ink-printing and thermal-recording media. Typical sensitizers contain an aromatic ring and exhibit aryl hydrocarbon receptor-mediated activity. They can accumulate in aquatic biota, leading to the disruption of ecosystems. Effluent from paper recycling plants has been identified as a source of contamination, and the presence of sensitizers in toilet paper may represent a new source of contamination in aquatic environments. To examine possible sources of contamination by sensitizers, this study investigated the levels of sensitizers in recycled toilet paper. We also studied the prevalence of sensitizers in rivers receiving effluents from sewage treatment plants in Japan, from 2020 to 2022. We detected eight sensitizers and related compounds in both toilet paper and river water samples; their total concentrations ranged from 0.78 to 34 µg/g (mean: 12 µg/g) in toilet paper and 58–1167 µg/L (median: 77 µg/L) in water. In the water samples, sensitizers were partitioned between liquid and suspended solid phases, and in suspended solids, sensitizers accounted for an average of 42% of the total. Correlation analysis showed a high correlation between sensitizer composition in the water from a river receiving sewage treatment plant effluents and toilet paper. Since these compounds were also detected in the river water analyzed in this study, toilet paper should be considered a novel source of sensitizers contamination in sewage treatment systems. [ABSTRACT FROM AUTHOR]

By purchasing larger quantities of goods and saving them for future consumption households are able to reduce transaction costs and acquire goods at a lower price per unit, presuming they can manage the transportation and storage costs. This study uses variations in state income tax refunds over time to estimate consumption responses to lump‐sum payments. Households purchase around 20 per cent more of easily stored toilet paper in the months in which tax refunds are issued, but do not increase purchases of perishables such as bread and eggs. In addition to purchasing more goods at a lower per‐unit price, households also appear to increase the time until their next purchase, which implies that they are saving goods for consumption over time. These in‐kind savings allow people to smooth their consumption over time, much like pecuniary savings. Government payments that provide lump‐sum payments can benefit consumers by providing additional liquidity to buy and store goods at a lower cost. [ABSTRACT FROM AUTHOR]

As a promising technology, interfacial solar steam technology has been widely recognized as an effective way to solve the shortage of energy and water, especially in remote areas. Whole roll of toilet paper (TP) is composed of well orderly layer-by-layer paper, which consisted by cellulose fiber. Here, a 3D solar steam generator, which is prepared by carbonized TP with the help of high-temperature carbonization, and NaOH activated under inert atmosphere is firstly demonstrated with excellent freshwater production capacity. Thanks to the good ordered layered structure, which consisted by porous carbon fiber, the evaporation speed of obtained evaporator is up to 3.37 kg m−2 h−1 under one sun (1000 W m−2) in laboratory, and the average value of 20.4 ± 2.98 kg m−2 day−1 in a 20 consecutive days outdoor experiment for treatment of stimulate seawater, respectively. The demonstrated 3D evaporator for per square meter can meet the drinking water demand of more than 10 people. This work not only provides an environmentally friendly, low-cost, easy-to-industrialize preparation for solar assistance interfacial evaporator, but also opens a promising approach for utilizing unique structure of commercialized available artificial materials and technologies to produce fresh water from seawater. [ABSTRACT FROM AUTHOR]

Due to an increasing demand, companies have started producing recycled products. However, little is known about the specific purchase behavior. Hence, this study analyses the factors influencing purchase intention for recycled products including differences related to different types of products and between Germany and South Africa. A quantitative study in Germany (n = 603) and South Africa (n = 692). shows that purchase intention is significantly higher in South Africa. The influencing factors (individual, product, and context related constructs) are the same in both countries, but they differ regarding their strength. Thus, the factor "attitude/environmental concern" has the strongest influence in South Africa, while it is "value/accessibility" in Germany. Furthermore, purchase intention for mobile phones is generally smaller than for t‐shirts and toilet paper. Purchase intention for recycled t‐shirts is significantly higher in South Africa than in Germany. [ABSTRACT FROM AUTHOR]

Toilet paper has been reported as one of the major insoluble pollutant components in the influent of wastewater treatment plants. Toilet paper fibers contribute to a large production of sewage sludge, resulting in a high treatment cost and high energy consumption. To find energy-efficient, cost-effective, and environment-friendly technologies for fiber removal and resource recovery from wastewater, a life-cycle assessment (LCA) was performed to analyze the wastewater treatment processes, including a sieving process for removing and recovering suspended solids before the biodegradation units. Based on the LCA results, it was estimated that the sieve screening process saved 8.57% of energy consumption. The construction phase of sieving consumed 1.31% energy cost compared with the operation phase. Environmental impact analysis showed that sieving reduced the impacts of climate change, human toxicity, fossil depletion, and particulate matter formation, which reduced the total normalized environmental impacts by 9.46%. The life-cycle analysis of the removal of toilet paper fibers from wastewater revealed the need to use more efficient methods to enhance the recovery of cellulose fibers. [ABSTRACT FROM AUTHOR]

This paper defines the nature of collective irrationality that flourished during the COVID-19 pandemic and lays out specific individual and shared traits and dispositions that facilitate it. Drawing on the example of globally experienced phenomenon of panicked toilet paper buying and hoarding during the COVID-19 pandemic and resources from philosophy, psychology, sociology, and economics this paper identifies four essential features of collective irrationality: weak shared mentality; non-cognitive and immediate mimicry; affective contagion; and psychosocial adaptivity. After (I) initially pointing out conceptual problems around benchmarking collectivity and irrationality, this paper (II) identifies weak mentality as serving the goals of “group” recognition internally and externally. It is argued that (III) the non-cognitive and immediate mimicry and emotional contagion are shared and individual dispositional conditions that facilitate collective irrationality in environments affected by uncertainty (IV). The human mimetic faculty and susceptibility to emotional contagion are presented as enabling and augmenting conditions under which collective irrationality flourishes. Finally, (IV) presenting collective irrationality in the context of psychosocial adaptivity, the paper provides evolutionary reasons for engaging in irrational behaviors, rendering collective irrationality as an adaptive strategy. [ABSTRACT FROM AUTHOR]

At the shelf, highly bleached (soft and white) toilet papers samples of different brands and one grayish toilet paper sample of another brand have been selected for spectroscopy and X‐ray diffraction analysis, in order to figure out if they can present allergic components in their chemical composition. Traces of Ca, associated with the presence of CaC2O4H2O was found in one of the highly bleached toilet paper samples and in the grayish one. However, no traces of fungi were found in the scanning electronic microscopy images. A trial correlation between the chemical composition and mechanical properties of the tested toilet paper samples, surprisingly shows that the grayish toilet paper sample presents the highest softness. [ABSTRACT FROM AUTHOR]

The present work was based on analysis of the flow regime of fibre suspensions, that corresponds to furnishes and process conditions typically established for tissue paper manufacturing, i.e., under the common range of stock consistencies at the machine headbox and most usual furnish compositions. The flocculation potential of fibre suspensions used for toilet papers, facial tissues, paper towels and table napkins were evaluated on the principles of analytical concepts for fibre agglomeration propensity. The results show crowding numbers from 5.0 to 69.0, depending on the type of fibre or fibre blending ratios. The findings regarding agglomeration factors indicate that flow regimes are mainly in semi-concentrated and around gel state zones but reached the concentrated flow regime, in extreme conditions of fibre morphology and stock consistency. The influence of hardwood and softwood mixture ratios on the fibre suspension features is shown and discussed for common formulations of tissue base paper. The effect of fibre length and coarseness on the flocculation potential and the impacts of fibre suspension flow regimes on the structural properties of tissue paper, such as the formation uniformity are discussed, demonstrating the reasons for the preferred use of high hardwood content in furnish balance for tissue paper manufacturing. [ABSTRACT FROM AUTHOR]

Paper has been used in the field of hygiene for centuries. Tissue papers have low grammage, creped or non-creped surface, and consisting of one or more layers from virgin papers. Toilet paper, which has an important area of use, comes at the beginning of the tissue papers divided into various product groups. Its use has increased even more with the effect of the coronavirus pandemic. Increasing use of toilet paper causes clogging in sewers as solid waste. Because an important and large part of the sewage is composed of cellulosic structures. Therefore, the disintegration of toilet paper is an important issue. The main properties of toilet paper are characterized by grammage, thickness, polymerization degree, softness and wet tensile strength. This study, it was aimed to determine the relationship between the degree of polymerization, thickness, grammage, softness and wet tension strength of toilet papers, which accumulate in the sewer pipes and cause clogging, and their disintegration in tap water and pure water at environment of different pH levels. A great level and positive linear relationship was found between grammage and in disintegration pH9. It was determined a low level and positive relationship with wet tensile strength in disintegration tap water. [ABSTRACT FROM AUTHOR]

Insufficiently treated wastes contained within onsite sanitation systems (OSS) commonly used by disadvantaged and developing communities contribute to public and environmental health concerns, calling for practical alternative solutions. At the basic level, an improved understanding of the evolution of chemical and physical constituents under different waste introduction methods and for short-term and long-term operation is needed. While receiving non-dilute waste under mixed, unmixed, toilet paper exclusion, and urine diversion (UD) regimes, self-flushing OSS simulated using anaerobic digesters (ADs) were compared during three operational stages: (1) 0–1 month service for unsheltered encampments; (2) 1–3 month disaster relief scenario; and (3) ≥ 3 months representing refugee camps and long-term household use. Although stratification was found to promote suitable conditions for short-term use of self-flushing toilets, mixing increased beneficial biodegradation of organic constituents. Urine-containing ADs demonstrated a shift from sulfide to ammonia odor accompanied by high pH (> 8) after ~ 240 d. E. coli reduction following elevated nitrogen and dissolved solids levels pointed to decreased pathogen survival in ADs with urine. The benefits of bacterial disinfection, reduction of sulfurous odors, and heightened organics degradation in mixed, urine-containing ADs suggest this format as more desirable for prolonged use of self-flushing OSS over unmixed or urine-diverting formats. [ABSTRACT FROM AUTHOR]

Cellulose is a very common polymer in domestic wastewater (WW), representing a not negligible part of the organic substance contained in sewage. To date, many studies have highlighted the feasibility of reusing this compound in several ways (e.g., building sector, wastewater treatment, energy production, etc.) after its separation from domestic WW. However, studies about the impact of the absence of cellulose on the chemical and physico-chemical parameters of a biological process are still lacking. In this work, two pilot-scale plants were used to simulate an anoxic treatment of WW in septic tanks, with and without cellulose (CWW and NCWW, respectively), for three months. The results of the monitoring highlighted that T, pH, and electrical conductivity (EC) remained almost constants, in both cases. The Spearman correlation coefficients (SCC) for turbidity (TUR), total suspended solids (TSS), and color (COL) indicated a higher removal in the case of CWW (65%, 66%, and 56%, respectively). Organic substance and nitrogen forms showed a similar behavior with and without cellulose, but in the case of CWW, N-NH3 was highly negatively correlated with TUR (SCC: −0.54), TSS (−0.49), and COL (−0.39). A biological denitrification process was highlighted in both cases. Despite these differences, when statistically analyzing the trends of the chemical and physico-chemical parameters for CWW and NCWW, a significant difference due to the absence of cellulose was excluded. These results will be useful to the scientific community, as they exclude that the operational parameters of anoxic treatments and the effectiveness on pollutants removal can be affected in the case of preliminary cellulose separation from domestic WW for recovery/reuse purposes. [ABSTRACT FROM AUTHOR]

A surface profilometry technique was used to characterize the surfaces of paper products. A stylus-contact type profilometer capable of simultaneously generating both surface roughness- and friction-profiles was used. As a stylus for the profilometer, a conical shape whose tip was rounded to have a 0.5 mm curvature radius was designed and successfully employed in both printing & writing (P&W) papers and hygiene papers such as bathroom tissues and kitchen towel. From the profiles, the mean absolute deviation (MAD) from the averages, i.e., R-MAD from the roughness average and F-MAD from the average coefficient of friction, were suggested as the new surface characterization parameters. To elucidate the surface roughness profiles by fractal dimension analysis, the variogram method was applied to get the fractal dimensions of the paper products. Generally, the value of the fractal dimension increased as the surface roughness increased. The surface profilometry technique with the fractal dimension analysis with the variogram method looks promising to gain additional insight on the surface characteristics of paper products. [ABSTRACT FROM AUTHOR]

Currently, tissue product producers try to meet consumers' requirements to retain their loyalty. In perforated products, such as toilet paper, these requirements involve the paper being portioned along the perforation line and not outside of it. Thus, it becomes necessary to enhance the behavior of the perforation line in perforated tissue papers. The current study aimed to verify if the perforation line for 0° (the solution found in commercial perforated products) is the best solution to maximize the perforation efficiency. A finite element (FE) simulation was used to validate the experimental data, where the deviations from the experiments were 5.2% for the case with a 4 mm perforation length and 8.8% for a perforation of 2 mm, and optimize the perforation efficiency using the genetic algorithm while considering two different cases. In the first case, the blank distance and the perforation line angle were varied, with the best configuration being achieved with a blank distance of 0.1 mm and an inclination angle of 0.56°. For the second case, the blank distance was fixed to 1.0 mm and the only variable to be optimized was the inclination angle of the perforation line. It was found that the best angle inclination was 0.67°. In both cases, it was verified that a slight inclination in the perforation line will favor partitioning and therefore the perforation efficiency. [ABSTRACT FROM AUTHOR]

The Curfews period of December 2015 to February 2016 in south-eastern Turkey was a time of collective violence in multiple forms, among which the Cizre Basement Massacres are the most known. The period of the general elections in June 2015, until the later and most recent attempt to carry out a military coup in July 2016, covers multiple curfews and military operations in the south-eastern regions of Turkey, and some social media material shared from the region caught international attention and provoked artistic as well as political responses. Zehra Doğan, a Kurdish journalist and artist, modified and re-shared some footage that was first posted in social media accounts of the special forces in Nusaybin and as a result was sentenced to three years in prison. She continued to produce artworks in prison, even though it was 'prohibited' for her to draw. She started to use her own body fluids, hair, newspaper, toilet paper, and any other available daily material in the prison to produce works of art. She also produced a series of work with her menstrual blood. For this article, I conducted two thematic one-to-one discussions with Zehra Doğan and studied her series of works produced with menstrual blood within the scope of mimesis and embodiment theories. Further sections of the article discuss: the function of these series of works for her acting out and working through processes of the collective political violence of which she became both a witness and a victim; methods of artistic transmission of political violence both for the artist and for the audience; and the possible ritualistic functions of using blood while producing work of arts in relation to collective political killings. [ABSTRACT FROM AUTHOR]

It is crucial to understand the effects caused by experimental parameters such as temperature, light, and food type on lab and field-based ecotoxicology experiments, as these variables, and combinations thereof, can affect results. The type of substrate used in exposure experiments, however, is generally assumed to have no effect. This may not always be correct. The metabolic changes in the freshwater crustacean, Austrochiltonia subtenuis exposed to copper, using three common substrates, gauze; toilet paper; and cellulose were investigated. Substrate alone did not affect survival, but each substrate elicited a different metabolic response and adult and juvenile amphipods had different substrate preferences. Several classes of metabolites were shown to change in response to different substrates and toxicant. These included disaccharides, monosaccharides, fatty acids, and tricarboxylic acid cycle intermediates. The results illustrate that metabolomic responses can differ in response to experimental factors that were previously thought not to be significant. In fact, our data indicate that substrate should be viewed as an experimental factor as important to control for as more well-known confounders such as temperature or food, thus challenging the current paradigm. Assuming substrate type has no effect on the experiment could potentially lead to errors in contaminant toxicity assessments. We propose that ideal good practise would be that all experimental factors should be evaluated for their potential influence on metabolomic profiles prior to contaminant response experiments being undertaken. [ABSTRACT FROM AUTHOR]

Tissue paper is deep-rooted in our daily life because of its different types of products that allow various applications. Tissue paper is a low grammage paper that is mainly characterized by softness, tensile strength, liquid absorption, and elasticity. These characteristics are essential when producing products such as toilet paper, kitchen rolls, hand towels, napkins, and facials. The tissue paper production involves two stages: formation of the tissue paper sheet itself and its converting into different finished products. Converting is characterized by several operations, namely: unwinding, winding, embossing, lamination, perforation, cutting, packaging, and palletizing. The most impacting operation is the embossing, which consists of marking a pattern on the paper sheet by applying pressure, with the intent to produce papers more aesthetically pleasing to the final consumer and/or a way to identify a particular brand. Also, it affects final properties, increasing the liquid absorption capacity and bulk but reducing softness and tensile strength. Converting is complex and has a huge impact on the finished products properties. In this review, the authors explored the different steps of converting and how they impact the different properties of finished tissue products. [ABSTRACT FROM AUTHOR]

Purpose: Coronavirus disease 2019-related fake news consistently appears on social media. This study uses appraisal theory to analyze the impact of such rumors on individuals' emotions, motivations, and intentions to share fake news. Furthermore, the concept of psychological distance and construal level theory are used in combination with appraisal theory to compare toilet paper shortages and celebrity scandal rumors. Design/methodology/approach: Data collected from 299 Taiwanese respondents to 150 toilet paper shortage-related and 149 celebrity gossip-related questionnaires were processed using partial least squares regression and multigroup analysis. Findings: In both cases, surprise is felt most intensely. However, unlike in the celebrity fake news scenario, worry plays a prominent role in driving the altruistic sharing motivation related to the toilet paper shortage rumor. Furthermore, while emotional attributes (basic or self-conscious, concrete, or abstract) serve as a guide for how emotions change with psychological distance, the degree to which an emotion is relevant to the fake news context is key to its manifestation. Originality/value: This study examines the impact of individuals' emotions on their motivations and intention to share fake news, applying the appraisal theory and the psychological distance concept in a single study to fake news sharing intention. It evaluates the relationship between psychological distance and emotions, revealing that it is not absolute and need not necessarily shift according to psychological distance change; rather, the relationship is context-sensitive. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

As personal care wipes become increasingly popular, inappropriate disposal to the sewage system is raising significant environmental and economic concerns. Many common brands, while marketed as "flushable," do not degrade appreciably in the plumbing and piping fixtures that the sewage transits. As such, these wipes can cause a myriad of problems including sewer blockage and destruction of pumps and grinders. This work sought to better understand key factors influencing the onset of such problems, including the volume of wipes present in the sewer and the degradation rates associated with a variety of personal wipe products, both "flushable" and nonflushable. The results suggest no correlation between the quantity of wipes in sewage and either the preceding precipitation or the sewage flow rate. To examine their degradability within a sewer system, we evaluated the degradation over time for six commercially available wipes under four conditions: static, kinetic, tap water, and sewage water. Five of the six wipe types were greater than 93% intact after 48 h of exposure to sewer‐like conditions and only one wipe type degraded to less than 14% of its initial volume after 48 h, which is similar to the degradation performance of tested toilet paper. Degradation rates were highest in tap water under kinetic conditions and lowest in raw sewage water under static conditions. [ABSTRACT FROM AUTHOR]

Toilet cleaning is an unhygienic task, and automation of this task is required, particularly in convenience stores. In this study, we propose a toilet cleaning system consisting of a toilet bowl for reducing urine scattering, a toilet bowl top cleaning mechanism, a toilet bowl lifting mechanism, and a toilet floor cleaning robot. The toilet bowl of the proposed system is a combination of the shapes of a typical toilet bowl and a urinal. It effectively reduces splashing when a human urinates in a standing position. At the beginning, the toilet bowl lifting mechanism lifts the toilet bowl to prevent the restroom contamination in advance, and the toilet bowl top cleaning mechanism and floor cleaning robot clean the toilet bowl and floor surface, respectively. The effectiveness of the proposed system was verified in ten experiments using simulated urine and garbage (three pieces of toilet paper, one toilet paper core, and one paper cup). The system was able to collect garbage in all experiments. Each cleaning task required approximately 17 s, and the average removal rate of simulated urine was 97.8%. [ABSTRACT FROM AUTHOR]

Disintegration potential of toilet grade tissue paper is one of the most important parameter keeping in mind the worldwide water scarcity faced by human race in current decade. The aim of this experimental study is to improve the disintegration potential of toilet tissue. Softener is used as debonding material. The right amount dry strength required by Toilet tissue is maintained by controlled fiber refining. High fiber bonding would lower the disintegration potential of the tissue paper, thus hampering the aim of study. The initial freeness of the pulp slurry was found 16°SR. It was then further refined in controlled manner to various degrees of freeness (i. e. 22, 24, 26, 28 and 30°SR). Bulk, Strength properties along with disintegration time and softness of 15GSM hand sheets prepared from each set of pulp slurry was investigated. Turbidity test was done to check the cloudiness. Upon analysing, it was found that the paper developed at 24°SR freeness having bulk 4.85 cc/gm, breaking length 750 meter, softness 80 Hand feel units, and disintegration time 08 seconds was most suitable having the better softness, optimum strength and higher disintegration potential as compared to the benchmarked samples. [ABSTRACT FROM AUTHOR]

The release of toilet paper (TP) and food waste (FW) in domestic sewage is a common practice in developed countries. Nevertheless, this practice has started to be used in developing countries where anaerobic digestion is applied. Therefore, this work aimed at evaluating the influence of the presence of TP and FW on the anaerobic digestion process in UASB reactors. During the experiment, two UASB reactors (8L) were fed with synthetic domestic sewage with the addition of toilet paper (TPR) and food waste (FWR) residues, respectively. In the first stage of the experiment (S‐I), the reactors operated with an organic load of 0.97 kg COD.m–3.d–1 (TPR) and 0.96 kgCOD.m–3.d–1 (FWR) and, in the second stage (S‐II), the quantities were increased to 1.58 kgCOD.m–3.d–1 (TPR) and 1.35 kgCOD.m–3.d–1 (FWR). In the experimental period of 110 days, the parameters total and filtered COD, series of solids, pH, alkalinity, and VFA were monitored. The mean removal of total COD was of 79±1% (S‐I) and 75±1% (S‐II) for TPR, and of 81±2% (S‐I) and 76±1% (S‐II) for FWR. Regarding VSS, the mean removal was of 94 ± 2% (S‐I) and 97 ± 1% (S‐II) for TPR, and of 95 ± 3% (S‐I) and 96 ± 1% (S‐II) for FWR. The VFA/TA ratio increased from S‐I (0.03 for TPR and FWR) to S‐II (0.17 to TPR and 0.10 to FWR), responding to the organic load increases, but still in the range of process stability. The added toilet paper or food waste were efficiently removed in both stages, reaching removals higher than 75%. In general, both reactors presented a good performance for the anaerobic process even under changes in organic load and influent composition. This experiment showed the feasibility of the combined treatment of TP or FW with domestic sewage in UASB reactors. [ABSTRACT FROM AUTHOR]

Background: The paper examines the "mysterious case of the disappearing toilet paper" during the COVID19 pandemic. Purpose: This paper describes the strategic impacts on paper and packaging supply chains due to the pandemic. Study design/methodology/approach: Structured interviews and qualitative discussions with organizational and supply chain management leaders. Findings/conclusions: Several "behind the scenes" and less well-documented supply chain impacts in the paper and packaging, and logistics industries were discovered. The critical effects observed are: (1) Impact on the manufacturing side was mitigated mainly by implementing CDC guidelines and by the willingness of industry leaders to go above and beyond to shield their employees from economic hardships. (2) The transportation sector has experienced a more severe workforce shortage, amplified by government actions before and during the pandemic. (3) Product specialization, a pre-pandemic strategy for industry participants, turned into a weakness during the pandemic due to unprecedented shifts in demand across sectors. (4) Traditional "lean" supply chain thinking is increasingly making way for a more interconnected "risk avoidance" strategic model. Limitations/future research: The research is limited to organizations in Midwest U.S.A. and one organization in Europe.

Phthalic acid esters are widely used as components of industrial and consumer products including paper and cardboard packaging materials in contact with food or human skin. Being endocrine‐disrupting chemicals, phthalic acid esters have a negative effect on human health and must be controlled in pulp and paper products. In the present study, supercritical fluid chromatography‐tandem mass spectrometry in combination with pressurized liquid extraction was proposed for phthalic acid esters determination in such objects. Octadecyl stationary phase with non‐endcapped silanol groups ensured rapid (4 min) separation of the 10 priority phthalic acid esters in isocratic elution mode and allowed for effective elimination of interferences from the trace impurities of phthalic acid esters in the mobile phase. The attained limits of quantitation are in the range of 0.7–10 μg/L in extracts and 0.02–0.3 μg/g in paper and cardboard samples. The developed method is distinguished by analysis rapidity, easy sample preparation procedure, high selectivity, low susceptibility to mobile phase contamination with analytes, low cost, and environmental friendliness due to the use of carbon dioxide as a main component of the mobile phase. The method was successfully tested on real samples of toilet paper and food packaging paper and cardboard in which eight analytes were found at the levels of 0.03–43.5 μg/g. [ABSTRACT FROM AUTHOR]

Pharmaceutical pollution has pervaded many water resources all over the globe. The propagation of this health threat drew the researchers' concern in seeking an efficient solution. This study introduced toilet paper waste as a precursor for carbon nanoparticles (CRNPs). The TEM results showed a particle size range of 30.2 nm to 48.1 nm, the BET surface area was 283 m2 g−1, and the XRD pattern indicated cubical-graphite crystals. The synthesized CRNPs were tested for removing tigecycline (TGCN), chlortetracycline (CTCN), oxytetracycline (OTCN), and doxycycline (DXCN) via the batch process. The adsorption equilibrium time for TGCN, DXCN, CTCN, and OTCN was 60 min, and the concentration influence revealed an adsorption capacity of 172.5, 200.1, 202.4, and 200.0 mg g−1, respectively. The sorption of the four drugs followed the PSFO, and the LFDM models indicated their high sorption affinity to the CRNPs. The adsorption of the four drugs fitted the multilayer FIM that supported the high-affinity claim. The removals of the four drugs were exothermic and spontaneous physisorption. The fabricated CRNPs possessed an excellent remediation efficiency for contaminated SW and GW; therefore, CRNPs are suggested for water remediation as low-cost sorbent. [ABSTRACT FROM AUTHOR]

Continuous waste discharge into natural water resources in many countries is a severe global issue, and seeking an effective solution is a researcher's concern. Herein, toilet paper waste was a low-cost precursor for preparing carbon nanoparticles (TPCNPs). The characterization of TPCNPs revealed a 30 nm to 50 nm particle size, a 264 m2 g−1 surface area, and a cubical graphite lattice XRD pattern. The TPCNPs were tested for removing malachite green (MG), indigo carmine (IC), rhodamine B (RB), and methylene blue (MB) dyes from water. The solution parameters were examined for the sorption process, and a pH of 5.0 suited the MB removal, while a pH of 6.0 was suitable for MG, IC, and RB. The effect of concentration investigation showed an adsorption capacity of 110.9, 64.8, 73.5, and 98 mg g−1 for MG, IC, RB, and MB, respectively. The sorption of the four dyes fitted the Langmuir isotherm model; it was exothermic and spontaneous. The water remediation was tested using groundwater and seawater samples (GW and SW) spiked with pollutants. It is worth mentioning that one treatment sufficed for the remediation of GW and SW contaminated by 5 mg L−1 concentration, while a double treatment was required for 10 mg L−1 pollution in both samples. [ABSTRACT FROM AUTHOR]