Search

ConspectusAll-solid-state batteries (ASSBs) are considered to be a next-generation energy storage concept that offers enhanced safety and potentially high energy density. The identification of solid electrolytes (SEs) with high ionic conductivity was the stepping-stone that enabled the recent surge in activity in this research area. Among the various types of SEs, including those based on oxides, sulfides, polymers, and hybrids thereof, sulfide-based SEs have gained discernible attention owing to their exceptional room temperature ionic conductivity comparable even to those of their liquid electrolyte counterparts. Moreover, the good deformability of sulfide SEs renders them suitable for reducing the interfacial resistance between particles, thereby obviating the need for high-temperature sintering. Nevertheless, sulfide-based ASSB technology still remains at the research stage without any manufacturing schemes having been established. This state of affairs originates from the complex challenges presented by various aspects of these SEs: their weak stability in air, questions surrounding the exact combination of slurry solvent and polymeric binder for solution-based electrode fabrication, their high interfacial resistance resulting from solid particle contacts, and limited scalability with respect to electrode fabrication and cell assembly. In this Account, we review recent developments in which these issues were addressed by starting with the materials and moving on to processing, focusing on new trials. As for enhancing the air stability of sulfide SEs, strengthening the metal-sulfur bond based on the hard-soft acid-base (HSAB) theory has yielded the most notable results, although the resulting sacrificed energy density and weakened anode interface stability would need to be resolved. Novel electrode fabrication techniques that endeavor to overcome the critical issues originating from the use of sulfide SEs are subsequently introduced. The wet chemical coating process can take advantage of the know-how and facilities inherited from the more established lithium-ion batteries (LIBs). However, the dilemmatic matter of contention relating to the polarity mismatch among the slurry solvent, SE, and binder requires attention. Recent solutions to these problems involved the exploration of various emerging concepts, such as polarity switching during electrode fabrication, fine polarity tuning by accurate grafting, and infiltration of the electrode voids by a solution of the SE. The process of using a dry film with a fibrous binder has also raised interest, motivated by lowering the manufacturing cost, maintaining the environment, and boosting the volumetric energy density. Finally, optimization of the cell assembly and operation is reviewed. In particular, the application of external pressure to each unit cell has been universally adopted both in the fabrication step and during cell operation to realize high cell performance. The effect of pressurization is discussed by correlating it with the interface stability and robust interparticle contacts. Based on the significant progress that has been made thus far, we aim to encourage the battery community to engage their wide-ranging expertise toward advancing sulfide-based ASSBs that are practically feasible.

All-solid-state batteries (ASSBs) that employ anode-less electrodes have drawn attention from across the battery community because they offer competitive energy densities and a markedly improved cycle life. Nevertheless, the composite matrices of anode-less electrodes impose a substantial barrier for lithium-ion diffusion and inhibit operation at room temperature. To overcome this drawback, here, the conversion reaction of metal fluorides is exploited because metallic nanodomains formed during this reaction induce an alloying reaction with lithium ions for uniform and sustainable lithium (de)plating. Lithium fluoride (LiF), another product of the conversion reaction, prevents the agglomeration of the metallic nanodomains and also protects the electrode from fatal lithium dendrite growth. A systematic analysis identifies silver (I) fluoride (AgF) as the most suitable metal fluoride because the silver nanodomains can accommodate the solid-solution mechanism with a low nucleation overpotential. AgF-based full cells attain reliable cycling at 25 °C even with an exceptionally high areal capacity of 9.7 mAh cm

Background As next‐generation sequencing (NGS) technology matures, various amplicon‐based NGS tests for BRCA1/2 genotyping have been introduced. This study was designed to evaluate an NGS test using a newly released amplicon‐based panel, AmpliSeq for Illumina BRCA Panel (AmpliSeq panel), for detection of clinically significant BRCA variants, and to compare it to another amplicon‐based NGS test confirmed by Sanger sequencing. Methods We reviewed BRCA test results done by NGS using the TruSeq Custom Amplicon kit from patients suspected of hereditary breast/ovarian cancer syndrome (HBOC) in 2018. Of those, 96 residual samples with 100 clinically significant variants were included in this study using predefined criteria: 100 variants were distributed throughout the BRCA1 and BRCA2 genes. All target variants were confirmed by Sanger sequencing. Duplicate NGS testing of these samples was performed using the AmpliSeq panel, and the concordance of results from the two amplicon‐based NGS tests was assessed. Results Ninety‐nine of 100 variants were detected in duplicate BRCA1/2 genotyping using the AmpliSeq panel (sensitivity, 99%; specificity, 100%). In the discordant case, one variant (BRCA1 c.3627dupA) was found only in repeat 1, but not in repeat 2. Automated nomenclature of all variants, except for two indel variants, was in consensus with Human Genome Variation Society nomenclature. Conclusion Our findings confirm that the analytic performance of the AmpliSeq panel is satisfactory, with high sensitivity and specificity., One hundred target variants were distributed throughout the BRCA1 and BRCA2 genes. AmpliSeq for Illumina BRCA Panel was satisfactory with 99% sensitivity and 100% specificity. Visual confirmation was needed for adequate reporting of indel variants.

Sulfide‐based all‐solid‐state batteries (ASSBs) have been featured as promising alternatives to the current lithium‐ion batteries (LIBs) mainly owing to their superior safety. Nevertheless, a solution‐based scalable manufacturing scheme has not yet been established because of the incompatible polarity of the binder, solvent, and sulfide electrolyte during slurry preparation. This dilemma is overcome by subjecting the acrylate (co)polymeric binders to protection−deprotection chemistry. Protection by the tert‐butyl group allows for homogeneous dispersion of the binder in the slurry based on a relatively less polar solvent, with subsequent heat‐treatment during the drying process to cleave the tert‐butyl group. This exposes the polar carboxylic acid groups, which are then able to engage in hydrogen bonding with the active cathode material, high‐nickel layered oxide. Deprotection strengthens the electrode adhesion such that the strength equals that of commercial LIB electrodes, and the key electrochemical performance parameters are improved markedly in both half‐cell and full‐cell settings. The present study highlights the potential of sulfide‐based ASSBs for scalable manufacturing and also provides insights that protection−deprotection chemistry can generally be used for various battery cells that suffer from polarity incompatibility among multiple electrode components.

The high specific capacity in excess of 200 mAh g-1 and low dependence on cobalt have enhanced the research interest on nickel-rich layered metal oxides as cathode materials for lithium-ion batteries for electric vehicles. Nonetheless, their poor cycle life and thermal stability, resulting from the occurrence of cation mixing between the transition-metal (TM) and lithium ions, are yet to be fully addressed to enable the widespread and reliable use of these materials. Here, we report a two-dimensional (2D) pyrazine-linked covalent organic framework (namely, Pyr-2D) as a coating material for nickel-rich layered cathodes to mitigate unwanted TM dissolution and interfacial reactions. The Pyr-2D coating layer, especially the 2D planar morphology and conjugated atomic configuration of Pyr-2D, protects the electrode surface effectively during cycling without sacrificing the electric conductivity of the host material. As a result, Pyr-2D-coated nickel-rich layered cathodes exhibited superior cyclability, rate performance, and thermal stability. The present study highlights the potential ability of 2D conjugated covalent organic frameworks to improve the key electrochemical properties of emerging battery electrodes.

Background Anti-HBc IgG is almost always detected in hepatitis B virus (HBV)-infected individuals and persists in resolved infections. In certain cases, anti-HBc IgG is the only serological marker and anti-HBc-positive result generally means anti-HBc total positivity. Objectives To evaluate the clinical sensitivity and specificity of an investigational medical device, Elecsys Anti-HBc II, using samples from the Korean population. Agreement between Elecsys Anti-HBc II and its widely utilized predecessor Elecsys Anti-HBc was also evaluated. Study design Residual serum or plasma samples stored at below −20 °C without individual identifiers were used in this study. This study had 106 randomly selected HBV deoxyribonucleic acid (DNA)-positive samples used for evaluating clinical sensitivity. For clinical specificity, a total of 239 both HBV DNA and hepatitis B surface antigen-negative samples, which were anti-HBc-negative by Elecsys Anti-HBc, were used. Agreement between Elecsys Anti-HBc and Elecsys Anti-HBc II was evaluated in total 345 samples. The Architect Anti-HBc II was used as a confirmatory test regarding discrepancies between Elecsys Anti-HBc and Elecsys Anti-HBc II results. Results The clinical sensitivity and specificity of Elecsys Anti-HBc II were found to be 99.06% and 100%, respectively. In total, 345 samples showed 100% agreement. Both positive and negative agreements were also 100%. Conclusions The clinical performance of Elecsys Anti-HBc II was confirmed as sufficient in Korean samples. Elecsys Anti-HBc II demonstrated an exceptional performance, exceeding the requirements of the Ministry of Food and Drug Safety and confirming its reliability as an in vitro diagnostic device for HBV diagnosis in Korea.

Background Cephalosporin is a major offending agent in terms of drug hypersensitivity along with penicillin. Cephalosporin intradermal skin tests (IDTs) have been widely used; however, their validity for predicting immediate hypersensitivity has not been studied. This study aimed to determine the predictive value of cephalosporin intradermal skin testing before administration of the drug. Methods We prospectively conducted IDTs with four cephalosporins, one each of selected first-, second-, third-, or fourth-generation cephalosporins: ceftezol; cefotetan or cefamandole; ceftriaxone or cefotaxime; and flomoxef, respectively, as well as with penicillin G. After the skin test, whatever the result, one of the tested cephalosporins was administered intravenously and the patient was carefully observed. Results We recruited 1421 patients who required preoperative cephalosporins. Seventy-four patients (74/1421, 5.2%) were positive to at least one cephalosporin. However, none of responders had immediate hypersensitivity reactions after a challenge dose of the same or different cephalosporin, which were positive in the skin test. Four patients who suffered generalized urticaria and itching after challenge gave negative skin tests for the corresponding drug. The IDT for cephalosporin had a sensitivity of 0%, a specificity of 97.5%, a negative predictive value of 99.7%, and a positive predictive value (PPV) of 0%, when challenged with the same drugs that were positive in the skin test. Conclusion Routine skin testing with a cephalosporin before its administration is not useful for predicting immediate hypersensitivity because of the extremely low sensitivity and PPV of the skin test (CRIS registration no. KCT0000455).

Linear regression technique has been used widely in water resources field as well as various fields such as economics and statistics, and so on. Using fuzzy regression technique, it is possible to quantify uncertainty and reflect them to the regression model. In this study, fuzzy regression model is developed to compute design floods in any place in Pyeongchang River basin. In ungaged basins, it is usually difficult to obtain data required for flood discharge analysis. In this study, basin characteristics elements are analyzed spatially using GIS and the technique of estimating design flood in ungaged mountainous basin is studied based on the result. Fuzzy regression technique is applied to Pyeongchang River basin which has mountainous basin characteristics and well collected rainfall and runoff data through IHP test basin project. Fuzzy design flood estimation equations are developed using the basin characteristics elements for Pyeongchang River basin. The suitability of developed fuzzy equations are examined by comparing the results with design floods computed in 9 locations along the river. Using regional regression method and fuzzy regression analysis, the uncertainties of the design floods occurred from the data monitoring can be quantified.

In this paper, the feedback loop mechanisms among the operational indices and exogenous variables of a sewerage system that are inherent in the operation and maintenance of a sewerage system were identified using the System Dynamics (SD) modeling methodology. The identified feedback loops were used to develop a SD computer simulation model that can be used to predict future operational conditions of a sewerage system and identified the efficient ways of operation. The data of Busan metropolitan city sewerage system was applied to verify the developed SD model and predict future operational conditions of the system. As a result, it was predicted that sewage treatment efficiency, volume of sewage treatment and cost recovery rate will be gradually increased, whereas service rate which was already very close to the target will remain almost the same as the current value. Furthermore, sensitivity analysis concerning some operational indices was performed in order to discover the policy leverage. As a result, it was found that the exogenous variables related to the pipe maintenance had a great effect on facility using rate, volume of sewage treatment as well as sewage treatment efficiency.