Search

Octaphosphonate biscavitand and self-folding deep biscavitand show strong positive and negative cooperativity, respectively. The mechanism of the cooperativity is discussed in terms of thermodynamic parameters and the detailed structure of the host-guest complexes. The two cavitand units of both biscavitands are tightly connected via four butylene linkers; thus, they are conformationally coupled, with the first guest binding information transferred to the resting-state cavities. This preorganization modulates the successive guest binding process in strong positive and negative cooperative manners, even though they display structural similarity. The first guest complexation always preorganizes the resting-state cavities where an existing water cluster and a toluene molecule are enthalpically stabilized. Successive guest complexation competes with the water cluster or a toluene molecule, reducing enthalpy gains. However, the desolvation upon successive guest binding processes liberate the solvents within the resting-state cavities. The water cluster is composed of 12 water molecules that are released upon successive guest complexation, resulting in a large entropy benefit. In contrast, toluene desolvation results in a limited entropy benefit. The difference in entropy benefits directs the strong positive or negative cooperativity of the structurally similar biscavitands.

The helicity of the supramolecular porphyrin polymers was determined by the chirality of solvent molecules, which permitted the polymer chains to be used in chiral sensing.

A new technique, surface-enhanced infrared absorption (SEIRA) spectroscopy, was used for the structural investigation of lanthanide (Ln) and actinide (An) complexes containing organic ligands. We synthesized thiol derivatives of organic ligands with coordination sites similar to those of 2-[

Tetrakis(porphyrin) molecular cleft was prepared by Suzuki-Miyaura cross coupling between a bis(porphyrin) boronate ester and 1,4-bis(4-iodophenyl)-1,3-butadiyne. The overall yield of the Tetrakis(porphyrin) was found to be more than doubled compared to that reported previously. The successful preparation of tetrakis(porphyrin) was characterized by a combination of nuclear magnetic resonance (NMR) spectroscopy and high resolution mass spectrometry (HRMS). Furthermore, HRMS evidenced the formation of supramolecular polymeric species driven by bis(porphyrin)-bis(porphyrin) dimerization in the gas phase.

Lower- and/or upper-rim functionalization of calix[4]arene realized a variety of calix[4]arene systems. Compared to these monomeric calix[4]arenes, covalently linked calix[4]arene oligomers have no...

The crystal structure of a bisporphyrin cleft molecule revealed that the head-to-head dimeric structure is directed by the intermolecular self-complementary hydrogen-bonding interactions of amide g...

A resorcinarene is a synthetic macrocycle consisting of four resorcinol molecules covalently linked by methylene bridges. The interannular bridges produce a cavitand that has a bowl-shaped structure. We have developed supramolecular capsules through Ag(I) or Cu(I) coordination-driven self-assembly of cavitands possessing 2,2′-bipyridyl arms in their upper rims. The self-assembled capsules accommodate various molecular guests and supramolecular assemblies possessing acetoxy groups. The host–guest chemistry of the molecular capsules has been applied in the fabrication of supramolecular polymers. This account describes recent developments in the supramolecular chemistry of resorcinarene-based coordination capsules and provides a brief history of resorcinarene-based capsules and related capsules.

Disiloxane-linked decathiophene and dodecathiophene polymers were prepared and their optical properties were examined. Compared with the monosilane-linked congeners reported previously, these polymers showed slightly redshifted absorption and PL bands in solution. Interestingly, the PL bands were redshifted when the spectra were measured in film, and the redshifts became pronounced as the silicon linkers were elongated from monosilane to disiloxane. This is likely due to the enhanced aggregation of the oligothiophene units, reflecting the improved flexibility of the silicon linkers.

Computational studies have often been carried out on hydrogen-terminated nanographenes (NGs). These structures are, however, far from those deduced from experimental observations, which have suggested armchair edges with two carboxy groups on the edges as dominant. We conducted computational studies on NGs consisting of C

This article reports production protocols for nanographenes and the effect of the reaction conditions on their structures and optical properties. These fundamental studies are of value for explorin...

Suitably decorated small aromatic systems can organize stacked structures that display interesting properties arising from their unique morphologies. Although nanographenes produced by top-down methods have graphitic domains and can in principle be applied for such supramolecular systems, to our knowledge, no such example has been reported thus far. This is partly because of their limited solubility in organic solvents and partly because of their wide lateral size distribution. To realize nanographene-based supramolecular aggregates, nanographenes carrying alkyl chains with narrow lateral size distributions are employed. We find that the nanographenes undergo self-assembly and that self-assembly is regulated by concentration, solvent polarity, temperature, and sonication. Optical measurements and AFM images indicate that stacked structures are possible candidates for aggregates. A molecular mechanics calculation models the interactions in the aggregates. The nanographenes showed concentration-dependent morphologies on mica, stacked structures at low concentrations and polymer-like network structures on mica at higher concentrations.

Top-down methods produce nanographenes with many carboxy groups on their edges. These functional groups can be utilized for developing multichromophoric systems. As proof of concept, pyrene is inst...

Application of a dynamic covalent chemistry strategy to the reversible reaction system of resorcinol and α, ω-alkanedials [(CH2)m(CHO)2] (m = 2–10) in ethanol in the presence of hydrogen chloride (...

To date, supramolecular chemistry techniques have been applied to fullerene polymer synthesis, enabling the development of main-chain fullerene polymers whose primary structure is well regulated, including linear, dendritic, and net-like fullerene arrays. These research achievements have led to an intriguing scientific challenge to create main-chain fullerene polymers with higher structural regulation. Here, we report the fabrication of a helically organized fullerene array based on the supramolecular polymerization of chiral ditopic tetrakiscalix[5]arene hosts and a dumbbell-shaped fullerene. The molecular association between the chiral hosts and the dumbbell-shaped fullerene resulted in sizable supramolecular polymers in solution, with the highest degree of polymerization of more than 32. The achiral dumbbell-shaped fullerene exhibited circular dichroism in the π-π* transition bands arising from the fullerene moieties through supramolecular polymerization. End-capping experiments of the supramolecular helical polymers showed that the chirally twisted conformation of the dumbbell-shaped fullerene was directed by supramolecular polymerization. Finally, the helical morphology of the supramolecular polymer chain was visualized by atomic force microscopy. The successful development of helical main-chain fullerene polymers would break new ground in fullerene chemistry.

Utilization of graphitic domains on nanographenes (NGs) for anchoring metal nanoparticles (NPs) can open the door for their applications in catalysis. Reported examples employ hydrophilic graphene oxides as substrates, making it difficult to coexist with organic substrates in organic solvents. The title NGs are metal NP-doped lipophilic NGs (M-NG1). Various metal cations form NPs with a diameter of a few to tens of nanometers on the basal plane. Owing to the lipophilic nature of NG1, M-NG1 is prepared by the reduction of the basal plane with sodium in THF followed by the addition of metal salts. Au-NPs on NG1 allow anchoring an organic thiol carrying an anthracene fluorophore, which is a proof of concept of composite materials utilizing the surface of NGs. The assessment of the catalytic function of Pd-NG1 reveals that chlorobenzene and bromobenzene yield a coupling product, and fluorobenzene also undergoes the reactions, demonstrating the catalytic function of Pd-NG1.

By utilizing a confined space inside a coordination capsule consisting of achiral components, we achieve trimeric structures composed of acetic acid and 2,3-disubstituted tartaric acid derivatives. Steric and electronic interactions between the substituents on the tartaric acid and 2,2'-bipyridyl arms of the capsule permit the transfer of the chirality of the tartaric acid to the capsule, resulting in diastereoenrichment of the host-guest complexes of up to 92 % de. The chiral templates can be washed away with diethyl ether, leaving an enantiomerically enriched capsule. The resulting capsule biases the dynamic axial chirality of a 4,4'-diacetoxybiphenyl guest carrying benzothiadiazole units, demonstrating guest-to-capsule and capsule-to-guest chirality transfer. The induced chirality on the bound guest enables it to emit circularly polarized luminescence in the NIR region, demonstrating the application of induced chirality for confined spaces for the generation of chiroptical properties.

In this report, we describe the self-assembly behavior of neutral platinum complexes in toluene. The platinum complexes were seen to form two different types of assemblies depending on the preparation temperature.

This Review introduces the research directions for the synthesis of supramolecular fullerene polymers. First, the discovery of host-guest complexes of pristine fullerenes is briefly outlined. We focus on progress in supramolecular fullerene polymers directed by the use of calix[5]arene-fullerene interactions, which comprise linear, networked, helical arrays of fullerenes in supramolecular ensembles. The unique self-sorting behavior of right-handed and left-handed helical supramolecular fullerene arrays is discussed. Thereafter, an extensive investigation of the calix[5]arene-fullerene interaction for control over the chain structures of covalent polymers is introduced.

A resorcinarene-based hemicarcerand, which consists of two cavitands covalently linked to each other by four alkyl chains, allows structural expansion and contraction by demetalation and metalation of Cu(I) cations with a size change of approximately 12 A. This metal-mediated switching of the two states regulates the conformations of acetoxy group-terminated alkyl chains. A guest binding study reveals the encapsulation of heptyl to undecyl chains in metal-free and Cu(I)-coordinated capsules. The chemical shifts of the acetoxy groups of the bound guests are the same in the metal-free capsule, while those in the Cu(I)-coordinated one differ from each other. This indicates that the metal-free capsule regulates its size to the bound guests, while the bound guests adopt their conformations to the cavity of the Cu(I)-coordinated capsules. 1H NMR measurements and molecular mechanics calculations suggest that the bound guests have extended conformations in the metal-free capsule, while the Cu(I)-coordinated capsule forces the bound guests to adopt folded conformations. The presence of folded conformations is supported by the conformational study with structurally similar capsules and a nonsymmetric guest, allowing us to observe nuclear Overhauser effects stemming from the folded conformations of the guest in the cavity.

The cyclic trimerization of substituted 4-alkylaminobenzoic acids was investigated. From NMR analyses of DiMeO_C3A with two methoxy groups, which was obtained by using SiCl4 as a dehydrative condensation reagent and purified by preparative GPC, a syn/anti ratio of 60/40 was obtained. On the other hand, 3Br_C3A with one bromine group at the ortho-position relative to the amide nitrogen was synthesized by using PPh3/Cl3CCCl3 as a dehydrative condensation reagent and isolated by SiO2 column chromatography. 3Br_C3A showed an inverse stereoselectivity, namely, a syn/anti ratio of 25/75 was calculated based on the comprehensive NMR analyses. The population of stereoisomers had no relationship with the dehydrative condensation reagent and reaction temperature. The solvent character also had a negligible influence on the syn/anti ratio in solution reflecting the rigid structure of 3Br_C3A.

We describe self-sorting supramolecular polymerization that uses chiral calix[5]arene hosts and a dumbbell-shaped fullerene guest. In a solution containing the racemic host and the guest, the (S)-host and the (R)-host preferably formed their homomeric complexes to form helical supramolecular fullerene polymers in a self-sorting manner. The self-sorting behavior has been studied using diffusion-ordered 1H NMR (DOSY) and circular dichroism (CD) studies. The present findings show that it is possible to accomplish controlled supramolecular polymerization.

N-Sulfonylated [3]catenanes, which exist as two translational isomers, were synthesized. The X-ray crystal structure of the distal isomer of [3]catenane, which has higher symmetry, revealed hydrogen bonds involving the carboxylic acid moieties on the terminal rings. The thermodynamic parameters of the isomerization revealed that this hydrogen bonding influenced the isomerization process.

Recent decades have seen an increased interest in the preparation of polymers possessing host or guest moieties as the end group, which has enabled new polymeric materials such as self-healable, shape-memory, and stimuli-responsive materials. Such polymers are commonly synthesized by tethering the host or guest moieties to polymers. On the other hand, there are limited reports demonstrating the preparation of host- or guest-appended polymers by directly polymerizing the corresponding host- or guest-appended monomers, which is valuable for easy access to diverse polymers from single molecular species. However, reactive host and/or guest moieties of the monomer interfere with the polymerization reaction. Here, we report that a biscalix[5]arene host-appended molecule can be polymerized with various monomers to form the corresponding host-appended polymers. The host–guest complexation behavior of calix[5]arene-appended polymers with fullerene derivatives was studied by 1H NMR and UV/Vis spectroscopic techniques, which revealed that the long polymer chains did not prevent host–guest complexation even when the fullerene derivative was equipped with a polymer chain. Thus, the present study shows the potential for developing polymers that have various combinations of polymer chains.

The conformation and electronic structure of dibenzo-24-crown-8 (DB24C8) complexes with K+ ion were examined by ion mobility-mass spectrometry (IM-MS), ultraviolet (UV) photodissociation (UVPD) spectroscopy in the gas phase, and fluorescence spectroscopy in solution. Three structural isomers of DB24C8 (SymDB24C8, Asym1DB24C8, and Asym2DB24C8) in which the relative positions of the two benzene rings were different from each other were investigated. The IM-MS results at 86 K revealed a clear separation of two sets of conformers for the K+(SymDB24C8) and K+(Asym1DB24C8) complexes whereas the K+(Asym2DB24C8) complex revealed only one set. The two sets of conformers were attributed to the open and closed forms in which the benzene-benzene distances in the complexes were long (>6 A) and short (

The title complex is a triple-stranded metallohelicate organized by the self-assembly of 5,17-difunctionalized calix[4]arenes and metal cations with octahedral coordination geometry. Due to hydrophilic triethylene glycol chains on the lower rim of the calix[4]arene, the metallohelicate can encapsulate cationic guests in water. NMR and UV-vis titration experiments reveal that the metallohelicate captures a pyridinium guest with an alanine derivative to form a host-guest complex with a host-guest ratio of 1 : 1. CD spectroscopy confirms the bias of the P- and M-helical sense of the metallohelicate by the captured guest. The metallohelicate captures two molecules of dicationic N,N'-dimethyl-DABCO and monocationic N-methyl quinuclidine, exhibiting a positive allosteric effect. 1 H NMR titration experiments indicate that the bound guests are in close proximately to the aromatic rings of the ligands. Molecular mechanics calculations based on the UV-vis and NMR observations suggest that the first guest preorganizes the conformation of the metallohelicate to facilitate access of the second guest to the cavity.

The repeating guest units of poly-(R)-2 were selectively encapsulated by the self-assembled capsule poly-1 possessing eight polymer side chains to form the supramolecular graft polymer (poly-1)n ⋅poly-(R)-2. The encapsulation of the guest units was confirmed by 1 H NMR spectroscopy and the DOSY technique. The hydrodynamic radius of the graft polymer structure was greatly increased upon the complexation of poly-1. The supramolecular graft polymer (poly-1)n ⋅poly-(R)-2 was stably formed in the 1:1 host-guest ratio, which increased the glass transition temperature by more than 10 °C compared to that of poly-1. AFM visualized that (poly-1)n ⋅poly-(R)-2 formed the networked structure on mica. The (poly-1)n ⋅poly-(R)-2 gelled in 1,1,2,2-tetrachloroethane, which led to fabrication of distinct viscoelastic materials that demonstrated self-healing behavior in a tensile test.

Nanographenes (NGs), also known as graphene quantum dots, have recently been developed as nanoscale graphene fragments. These nanocarbon species can be excited with UV light and emit light from the UV-to-visible region. This photoemission has received great attraction across multiple scientific fields. NGs can be produced by cutting off carbon sources or fusing small organic molecules to grow graphitic structures. Furthermore, the organic synthesis of NGs has been intensely studied. Recently, the number of research papers on postsynthetic modification of NGs has gradually increased. Installed organic groups can tune the properties of NGs and provide new functionalities, opening the door for the development of sophisticated carbon-based functional materials. This review sheds light on recent progress in the postsynthetic modification of NGs and provides a brief summary of their production methods.

π-Stacked polymers, which consist of layered π-electron systems in a polymer, can be expected to be used in molecular electronic devices. However, the construction of a stable π-stacked structure in a polymer is considerably challenging because it requires sophisticated designs and precise synthetic methods. Herein, we present a novel π-stacked architecture based on poly(quinolylene-2,3-methylene) bearing alanine derivatives as the side chain, obtained through the living cyclo-copolymerization of an o-allenylaryl isocyanide. In the resulting polymer, the neighboring quinoline rings of the main chain form a layered structure with π-π interactions, which is stabilized by intramolecular hydrogen bonds. The vicinal quinoline units form two independent helices and the whole molecule is a twisted-tape structure. This structure is established on the basis of UV/CD spectra, theoretical calculations, and atomic-force microscopy.

Head-to-tail dipole-dipole arrays of isoxazole rings lead to supramolecular helical assemblies where the assembly and disassembly are regulable based on temperature and solvent properties. The coop...

We synthesized fullerene-terminated polymethyl methacrylates (PMMAs), linear ditopic calix[5]arene host, and branched tritopic calix[5]arene host. The calix[5]arene hosts bound to the fullerene moi...

An octaiodobiscavitand was synthesized via an aromatic Finkelstein iodination reaction in good yield. Sonogashira and Suzuki coupling reactions of the octaiodobiscavitand gave rise to upper-rim-functionalized biscavitands that self-assembled to form a supramolecular polymer in the solid state., This work was supported by the Grants-in-Aid for Scientific Research, JSPS KAKENHI Grant JP15H03817, and by the Grants-in-Aid for Scientific Research on Innovative Areas, JSPS KAKENHI Grants JP19H04585 (Coordination Asymmetry). Funding from The Ogasawara Foundation for the Promotion of Science & Engineering, The Futaba Electronics Memorial Foundation, Nippon Sheet Glass Foundation, Iketani Science and Technology Foundation, Takahashi Industrial and Economic Research Foundation, and Fukuoka Naohiko Memorial Foundation is gratefully acknowledged.

Graphene and its relatives have received considerable attention from the fields of physics and chemistry since the isolation of pristine graphene sheets. Nanographenes (NGs) are graphene fragments that are a few to tens of nanometers in diameter. Compared to graphene and its relatives, such as graphene oxides, NGs can be handled more easily, and their large π surface and oxygen functional groups on the edge allow postsynthetic modifications. The study of NGs is gradually shifting from the development of synthetic procedures to postsynthetic modification. From the structural point of view, NGs can be regarded as two-dimensional carbon polymers. Their unique structures and affinity for organic molecules make NGs excellent scaffolds for two-dimensional materials, which are now an important topic in organic and polymer chemistry. In this conceptual article, we introduce the position of NGs from the perspective of two-dimensional substances and briefly review both the structural features of NGs and the effects of functionalization on their physical properties. These are valuable when producing reasonable strategies for their postsynthetic modifications.

The title compound is a water-soluble triply stranded metallohelicate 1

Nanographene (NG) is a potential candidate for organic EC materials because of its large π-conjugated system, chemical stability, absorption band covering the visible region, and tunable optical properties by postsynthetic modification. We show that NGs carrying redox-active triphenylamine (TPA) units covalently linked to the NG edge function as EC materials in the NIR region. The hybrid materials can be obtained by the installation of TPA units onto the NG edge and display changes in the absorption spectrum in the NIR region extending to a wavelength of over 2000 nm upon one-electron oxidation and reduction at low potentials (1.1 V). Time-dependent unrestricted density functional theory calculation of a model NG at the UB3LYP/6-31G(d,p) level of theory suggests that a narrow energy gap between the basal plane and the oxidized TPA unit is responsible for the observed EC function in the NIR region.

The host-guest complexation of a bisporphyrin cleft with various electron-deficient guest molecules was studied in solution and in the solid-state. X-ray crystal structures of a bisporphyrin cleft with naphthalene dianhydride and 2,4,7-trinitrofluorenone reveal that these guest molecules were located within the bisporphyrin cleft and formed ideal π-π stacking interactions in a host-guest ratio of 1:1. Isothermal titration calorimetry determined the binding constants and thermodynamic parameters for the 1:1 host-guest complexations in 1,2-dichloroethane and toluene. Two types of enthalpy-entropy compensation effects were found: (1) The tightly stacked host-guest structures restrict guest movement within the cleft, which results in significant desolvation with large intrinsic entropies. (2) The loosely bound guests maintain their molecular freedom within the bisporphyrin cleft, which leads to less desolvation with small intrinsic entropies. Chiral guest encapsulation directed the clockwise and anticlockwise twisted conformations of the bisporphyrin units, which induced bisignate CDs.