Search

Mengxin Tang,1,2,* Mianluan Pan,1,* Ye Qiu,1 Jie Huang,3 Wen Zeng,2 Jianquan Zhang1 1Department of Respiratory and Critical Medicine, The Eighth Affiliated Hospital, Sun Yat-Sen University, Shenzhen, Guangdong, 518000, People’s Republic of China; 2Department of Respiratory and Critical Medicine, The First Affiliated Hospital of Guangxi Medical University, Nanning, Guangxi, 530021, People’s Republic of China; 3Department of Tuberculosis Ward, Nanning Fourth People’s Hospital, Nanning, Guangxi, 530021, People’s Republic of China*These authors contributed equally to this workCorrespondence: Wen Zeng, Department of Respiratory and Critical Medicine, The First Affiliated Hospital of Guangxi Medical University, Nanning, Guangxi, 530021, People’s Republic of China, Tel +8618589883694, Fax +86771-5350031, Email guigao0302@163.com Jianquan Zhang, Department of Respiratory and Critical Medicine, The Eighth Affiliated Hospital, Sun Yat-Sen University, Shenzhen, Guangdong, 518000, People’s Republic of China, Tel +8613978123845, Fax +86755-23482484, Email jqzhang2002@126.comBackground: Anti-IFN-γ autoantibodies (AIGAs) are closely related to the disseminated infection of multiple pathogens. Mycobacterium phlei (M. phlei) is a nonpathogenic nontuberculous mycobacteria (NTM), and M. phlei infection of the bone is extremely rare. We report a rare case of high-titer AIGAs presenting with Sweet’s syndrome (SS) accompanied by opportunistic coinfection with multiple pathogens during 12 years of follow-up. The patient in this case also developed disseminated M. phlei infection with osteolytic destruction after treatment for SS.Case Presentation: A 68-year-old Chinese woman was admitted to our hospital in August 2009 due to fever and cough with expectoration for 3 months. The patient was successively infected with Klebsiella pneumoniae, herpes zoster virus and Candida. Chest computed tomography (CT) showed recurrent consolidations in different lung fields. After 15 months of antimicrobial treatment, the patient experienced partial recovery. In September 2010, the patient was pathologically diagnosed with SS due to the presence of multiple rashes. After prednisone and thalidomide treatment, the rashes subsided, and the pulmonary lesions had completely absorbed. In May 2011, the patient was diagnosed with disseminated tuberculosis and was administered anti-tuberculosis therapy for 3 months without improvement. NTM was subsequently cultured from her sputum and chest wall pus, and she improved after 20 months of anti-NTM therapy. In March 2016, the patient developed osteolytic destruction of the C7-T2 vertebral bodies with a back abscess. NTM was eventually cultured from the dorsal abscess pus and further identified as M. phlei. High-titer AIGAs were detected in the patient’s serum. After another round of aggressive anti-NTM therapy, the patient was finally cured.Conclusion: Patients with AIGA-associated anti-cytokine autoantibody disease can present with multiple opportunistic infections and SS involving the lung. AIGA-associated immunodeficiency leads to infection with nonpathogenic M. phlei, which is refractory, can cause relapse, and even leads to osteolytic destruction.Keywords: Mycobacterium phlei, sweet’s syndrome, osteolytic destruction, anti-IFN-γ autoantibodies

Wen Zeng,1,2 Ye Qiu,1,2 Mengxin Tang,1,2 Hui Zhang,2 Mianluan Pan,1 Shudan Tang,2 Jianquan Zhang1 1Department of Respiratory and Critical Medicine, The Eighth Affiliated Hospital, Sun Yat-Sen University, Shenzhen, Guangdong, 518000, People’s Republic of China; 2Department of Respiratory and Critical Medicine, The First Affiliated Hospital of Guangxi Medical University, Nanning, Guangxi, 530021, People’s Republic of ChinaCorrespondence: Jianquan ZhangDepartment of Respiratory and Critical Medicine, The Eighth Affiliated Hospital, Sun Yat-Sen University, Shenzhen, Guangdong, 518000, People’s Republic of ChinaTel +8613978123845Fax +86755-23482484Email jqzhang2002@126.comAbstract: A high titer of neutralizing anti-interferon-γ autoantibodies can cause immunodeficiency associated with severe or disseminated infections caused by Talaromyces marneffei in human immunodeficiency virus-negative patients. Herein, we reported a rare case of disseminated Talaromyces marneffei and Burkholderia cepacia infection. The patient’s lungs, lymph nodes, and bronchi were involved, and he had neck abscesses and osteomyelitis. We measured the neutralizing anti-interferon-γ autoantibodies in the peripheral blood and found that the patient had a persistently high positive titer. Despite aggressive treatment, the patient developed disseminated intravascular coagulation and died. Thus, high-titer nAIGAs may be associated with multiple opportunistic, persistent and disseminated infections.Keywords: Burkholderia cepacia, Talaromyces marneffei, adult immunodeficiency, neutralizing anti-interferon-γ autoantibodies

Three-dimensional (3D) printed samples produced by fused deposition modeling (FDM) have low interlayer shear strength and poor bending mechanical properties owing to the technological characteristics of the accumulation of raster pattern and layers. The present study input ultrasonic vibration energy to 3D printed samples under pressure, and investigated the effects of ultrasonic vibration on the bending and dynamic mechanical properties of FDM 3D printed ABS samples. It was found that ultrasonic strengthening increased the bending strength of ABS samples by 10.8%, increased the bending modulus by 12.5%, and improved the dynamic mechanical properties. The combination of ultrasonic strengthening technology and FDM 3D printing technology can improve the flexural and dynamic mechanical properties of existing FDM 3D printed samples, and is important in broadening the application of 3D printed parts.

Wire-by-wire and layer-by-layer printing processes used in fused deposition modeling (FDM) three-dimensional (3D) printed parts result in poor mechanical properties. In this study, 3D printed acrylonitrile butadiene styrene (ABS) samples strengthened by ultrasonic vibrations are studied by a controlled variate method. The effects of ultrasonic strengthening pressure and ultrasonic strengthening time on the tensile mechanical properties of samples are studied. The tensile strength of the samples increases by 11.3%, the Young’s modulus increases by 16.7%, and the surface roughness decreases after ultrasonic strengthening. Ultrasonic strengthening after FDM 3D printing significantly improves the tensile mechanical properties of the sample and broadens the potential applications for FDM 3D printing technology.