Search

Herein, a new, direct paper-based fluorimetric method is described for the quantitative determination of glutathione (GSH) molecules in nutritional supplements. Briefly, the proposed analytical method is based on the fluorescence emission resulting from the direct and selective chemical reaction of GSH molecules with the derivatization reagent that is o-phthalaldehyde (OPA) in acidic conditions at room temperature. The intensity of the emitted fluorescence on the surface of the analytical paper devices after irradiation with a lamp at 365 nm is proportional to the concentration of GSH and is measured using a smartphone as the detector. This methodology, which is suitable for measurements in laboratories with limited resources, does not require specialized instrumentation or trained personnel. The protocol governing the proposed method is simple and easily applicable. Essentially, the chemical analyst should adjust the value of pH on the surface of the paper by adding a minimal amount of buffer solution; then, after adding a few microliters of the derivatization reagent, wait for the surface of the paper to dry and, finally, add the analyte. Subsequently, the irradiation of the sensor and the measurement of the emitted fluorescence can be recorded with a mobile phone. In the present study, several parameters affecting the chemical reaction and the emitted fluorescence were optimized, the effect of interfering compounds that may be present in dietary supplements was examined, and the stability of these paper sensors under different storage conditions was evaluated. Additionally, the chemical stability of these paper devices in various maintenance conditions was studied, with satisfactory results. The detection limit calculated as 3.3 S/N was 20.5 μmol L−1, while the precision of the method was satisfactory, ranging from 3.1% (intra-day) to 7.3% (inter-day). Finally, the method was successfully applied to three different samples of dietary supplements. [ABSTRACT FROM AUTHOR]

A simple, equipment-free, direct fluorometric method, employing paper-based analytical devices (PADs) as sensors, for the selective determination of quinine (QN) is described herein. The suggested analytical method exploits the fluorescence emission of QN without any chemical reaction after the appropriate pH adjustment with nitric acid, at room temperature, on the surface of a paper device with the application of a UV lamp at 365 nm. The devices crafted had a low cost and were manufactured with chromatographic paper and wax barriers, and the analytical protocol followed was extremely easy for the analyst and required no laboratory instrumentation. According to the methodology, the user must place the sample on the detection area of the paper and read with a smartphone the fluorescence emitted by the QN molecules. Many chemical parameters were optimized, and a study of interfering ions present in soft drink samples was carried out. Additionally, the chemical stability of these paper devices was considered in various maintenance conditions with good results. The detection limit calculated as 3.3 S/N was 3.6 mg L−1, and the precision of the method was satisfactory, being from 3.1% (intra-day) to 8.8% (inter-day). Soft drink samples were successfully analyzed and compared with a fluorescence method. [ABSTRACT FROM AUTHOR]

A novel, rapid, and facile method for the colorimetric determination of calcium using micro-analytical paper-based devices (μ-PADs) was developed. The proposed analytical method utilizes the color differences developing, after the addition of calcium, on the surface of the devices because of the complexation reaction of calcium with Methylthymol Blue (MTB) at room temperature, in alkaline pH. The devices were manufactured with chromatographic paper, using wax barriers, and the analytical protocol was easily implemented without the need of any experimental apparatus except for a simple imaging device. The user must regulate the pH, add the solutions on the paper, and measure the color intensity of the formed Ca(II)–MTB complex with a flatbed scanner. The experimental conditions for optimum color development, the possible interfering substances, and the reliability of the paper devices in different preserving conditions were optimized, with satisfactory results. The method exhibited acceptable detection limits (2.9 mg L−1) with sufficiently good precision, which varied from 4.2% (intra-day) to 6.4% (inter-day). Saliva samples from healthy volunteers were successfully analyzed, and the calcium levels were calculated in the range of 30.71 to 84.15 mg L−1. [ABSTRACT FROM AUTHOR]

A direct fluorimetric method, employing μicro-analytical paper-based devices (μ-PADs) for the selective determination of histidine (HIS) is described. The suggested method exploits the fluorescence emission of histidine after its rapid reaction with o -phthalaldehyde (OPA) at a basic medium (pH = 10) on the surface of a paper device with the application of a UV lamp at 354 nm. The devices are inexpensive and are composed of chromatographic paper and wax barriers. The analytical protocol is easily applicable with minimal technical expertise and without the need of expensive experimental apparatus. The user has to add a test sample, illuminate the device with a UV lamp, and read the fluorescence of the sensing area using a simple imaging device such as a cell-phone camera. The method is free from common interferences likely to affect the measurement of histidine and is selective among all other amino acids. This analytical procedure was optimized and validated, paying special attention to its intended application. The detection limits are as low as 1.8 μM with very satisfactory precision ranging from 6.4% (intra-day) to 8.9% (inter-day). Random urine samples from adult volunteers (n = 5) were successfully analyzed and HIS content ranged between 260 and 1114 μmol L−1 with percentage recoveries in the range of 78.2 and 124.6%. [Display omitted] • A paper-based analytical device was developed to determine histidine in human urine samples. • Highly sensitive detection of histidine based on the fluorescence emission of OPA-HIS reaction was achieved. • A UV lamp for the irradiation and a smartphone as the detector were the only instrumentation used. • The paper-based device presented high analytical stability and portability. [ABSTRACT FROM AUTHOR]

This study reports a new approach for the determination of copper ions in water samples that exploits the complexation reaction with diethyldithiocarbamate (DDTC) and uses widely available imaging devices (i.e., flatbed scanners or smartphones) as detectors. Specifically, the proposed approach is based on the ability of DDTC to bind to copper ions and form a stable Cu-DDTC complex with a distinctive yellow color detected with the camera of a smartphone in a 96-well plate. The color intensity of the formed complex is linearly proportional to the concentration of copper ions, resulting in its accurate colorimetric determination. The proposed analytical procedure for the determination of Cu2+ was easy to perform, rapid, and applicable with inexpensive and commercially available materials and reagents. Many parameters related to such an analytical determination were optimized, and a study of interfering ions present in the water samples was also carried out. Additionally, even low copper levels could be noticed by the naked eye. The assay performed was successfully applied to the determination of Cu2+ in river, tap, and bottled water samples with detection limits as low as 1.4 µM, good recoveries (89.0–109.6%), adequate reproducibility (0.6–6.1%), and high selectivity over other ions present in the water samples. [ABSTRACT FROM AUTHOR]

• Historical and digital photography are combined in a new detection mode. • UV absorbance measurements are performed without scientific equipment. • UV light is transformed into a visible image which is then used for analysis. • A single device configuration is suitable for multiple assays. This work introduces photography-based photometry, as complementary to digital image colorimetry, by demonstrating that historical photography can be repurposed to enable UV photometric analysis, using inexpensive and ubiquitous materials. Analysis is performed by illuminating the samples with UV radiation and then capturing the transmitted irradiation on the surface of a photographic paper through photochemical reduction of its photosensitive coating. A visible image is then formed on the paper surface and is recorded as a digital photograph. The color intensity of the image is directly proportional to the concentration of the analytes in the sample and is quantified in the RGB color system. By selecting the appropriate light source and photosensitive paper, sensitivity to light can be selected to approximate the absorbance spectra of the target analyte thus accomplishing good selectivity and high sensitivity. On the basis of this principle, a variety of assays were used to demonstrate that photography-based photometry, can be used to perform accurate UV absorbance measurements over a wide spectral range, in a high throughput format (i.e. microtiter plates) and at low cost as compared to expensive microplate spectrophotometers. Depending on the photosensitivity of the photographic paper, linear ranges and detection limits that are similar or lower up to an order of magnitude to those obtained with standard spectrophotometry were achieved. Importantly, a single device configuration can be used for all assays, irrespectively of the maximum absorbance wavelength, which significantly simplifies its operation thus holding great promise for routine applications in resource-limited settings even by non-experts. [ABSTRACT FROM AUTHOR]