Search

BACKGROUND: Although polyp size dictates surveillance intervals, endoscopists often estimate polyp size inaccurately. We hypothesized that an intervention providing didactic instruction and real-time feedback could significantly improve polyp size classification. METHODS: We conducted a multicenter randomized controlled trial to evaluate the impact of different components of an online educational module on polyp sizing. Participants were randomized to control (no video, no feedback), video only, feedback only, or video + feedback. The primary outcome was accuracy of polyp size classification into clinically relevant categories (diminutive [1-5mm], small [6-9mm], large [≥10mm]). Secondary outcomes included accuracy of exact polyp size (inmm), learning curves, and directionality of inaccuracy (over- vs. underestimation). RESULTS: 36 trainees from five training programs provided 1360 polyp size assessments. The feedback only (80.1%, P=0.01) and video + feedback (78.9%, P=0.02) groups had higher accuracy of polyp size classification compared with controls (71.6%). There was no significant difference in accuracy between the video only group (74.4%) and controls (P=0.42). Groups receiving feedback had higher accuracy of exact polyp size (inmm) and higher peak learning curves. Polyps were more likely to be overestimated than underestimated, and 29.3% of size inaccuracies impacted recommended surveillance intervals. CONCLUSIONS: Our online educational module significantly improved polyp size classification. Real-time feedback appeared to be a critical component in improving accuracy. This scalable and no-cost educational module could significantly decrease under- and overutilization of colonoscopy, improving patient outcomes while increasing colonoscopy access.

Background and Aims: The 2020 United States Multi-Society Task Force on Colorectal Cancer guidelines for surveillance after colonoscopy with polypectomy introduced significant changes in surveillance intervals. We sought to identify rates of adherence to these new guidelines at an academic medical center. Methods: Average-risk screening colonoscopies where 1 to 4 polyps

INTRODUCTION: Most patients with esophageal adenocarcinoma (EAC) do not have a previous diagnosis of Barretts esophagus (BE), demonstrating a failure of current screening practices. An understanding of patient attitudes and barriers is essential to develop and implement interventions to improve BE screening adherence. METHODS: We conducted a Web-based survey of patients aged >50 years with chronic gastroesophageal reflux disease at 3 academic medical centers and 1 affiliated safety net health systems. Survey domains included patient characteristics, endoscopy history, familiarity with screening practices, perceived BE/EAC risk, and barriers to screening. RESULTS: We obtained a response rate of 22.6% (472/2,084) (74% men, mean age 67.9 years). Self-identified race and ethnicity of participants was 66.5% non-Hispanic White, 20.0% non-Hispanic Black, 13.4% other race, and 7.1% Hispanic. Screening for BE was recommended in only 13.2%, and only 5.3% reported previous screening. Respondents had notable gaps in knowledge about screening indications; only two-thirds correctly identified BE risk factors and only 19.5% believed BE screening was needed for gastroesophageal reflux disease. More than 1 in 5 respondents believed they would get BE (31.9%) or EAC (20.2%) but reported barriers to screening. Compared with White respondents, more Black respondents were concerned about getting BE/EAC and interested in screening but report higher barriers to screening. DISCUSSION: Patients at risk for BE, particularly racial and ethnic minorities, are worried about developing EAC but rarely undergo screening and have poor understanding of screening recommendations.

Composite tape springs are curved shells with the ability to assume two energetically stable states. By carefully selecting layup and mold during manufacturing, these structures can store significant strain energy, making them ideal for deployable systems. Yet, their potential as reversible reconfigurable structures, particularly as adaptive hinges, remains largely unexplored. In structural applications, both stable states of these hinges must exhibit high stiffness to support loads while retaining the capacity for reversible reconfiguration. This paper introduces kinematics-based stacking concepts aimed at enhancing the stiffness of bistable hinges in both states, allowing for specific fold angles without compromising compliance. These designs leverage snap-through kinematics, resulting in unique architectures with customizable stiffness and stability. Additionally, the paper presents a novel energy-based semi-analytical approach for analyzing the stacking concepts. This approach involves constrained exploration of the energy landscape to assess the design space in terms of stiffness and energy barriers. Through comprehensive parametric studies, the research demonstrates significantly increased stiffness and reduced peak stresses compared to single tape spring designs. This research highlights the potential of employing tape springs as reconfigurable load-bearing structures in diverse applications, including precise adjustments of low-mass payloads like solar panels or antennas on space structures.

The ansa cervicalis (AC) is a neural loop within the carotid triangle of the anterior neck. The loop is traditionally formed by nerve roots C1–C3 of the cervical plexus and extends multiple motor branches. The current case was discovered during a routine dissection as an anatomical variation of the right AC in an 86-year-old Caucasian male cadaver. In this variation, the C1 nerve root did not form the typical loop with the C2 and C3 nerve roots, but instead, remained independent, traveling deep to the superior belly of the omohyoid muscle to supply the sternothyroid muscle. Because no loop was formed, the anatomy of the current case was not an ansa according to the Latin origin of the word, meaning handle or loop. The AC is an important anatomical landmark within the neck and is implicated in laryngeal reinnervation and respiratory nerve stimulation for patients with sleep apnea. The current anatomical variant contributes to a relatively limited catalog of identified anomalies. Knowledge of new AC variations can guide future surgical interventions and further develop the current base of knowledge surrounding the neuromuscular structures of the head and neck.

Additive manufacturing (AM) facilitates the fabrication of compliant mechanisms through its free-form and design customisation capabilities. Specifically, the properties of kinetic mechanisms such as springs can be extended with regards to their inherent (non-)linear stiffness functions. This allows for the customisation of AM springs according to user preferences. By combining the design synthesis approach of building blocks with the structural optimisation approach for AM, it is possible to define and customise spring stiffness functionalities. The optimisation process employs an automated computational framework based on a genetic algorithm scheme, which has been demonstrated through randomised and reference case studies. This framework enables the attainment of linear, progressive (stiffening), and degressive (softening) stiffness curves. The manufacturability of the springs has been validated through laser powder bed fusion using stainless-steel material 17–4 PH (H900). The springs have resulted in an accuracy error of maximum 6.48% and precision error of maximum 5% through compression testing.

ObjectiveIndividuals with systemic lupus erythematosus (SLE) are at high risk for infections and SLE- and medication-related complications. The present study was undertaken to define a set of SLE-specific adverse outcomes that could be prevented, or their complications minimized, if timely, effective ambulatory care had been received.MethodsWe used a modified Delphi process beginning with a literature review and key informant interviews to select initial SLE-specific potentially preventable conditions. We assembled a panel of 16 nationally recognized US-based experts from 8 subspecialties. Guided by the RAND-UCLA Appropriateness Method, we held 2 survey rounds with controlled feedback and an interactive webinar to reach consensus regarding preventability and importance on a population level for a set of SLE-specific adverse conditions. In a final round, the panelists endorsed the potentially preventable conditions.ResultsThirty-five potential conditions were initially proposed; 62 conditions were ultimately considered during the Delphi process. The response rate was 100% for both survey rounds, 88% for the webinar, and 94% for final approval. The 25 SLE-specific conditions meeting consensus as potentially preventable and important on a population level fell into 4 categories: vaccine-preventable illnesses (6 conditions), medication-related complications (8 conditions), reproductive health-related complications (6 conditions), and SLE-related complications (5 conditions).ConclusionWe reached consensus on a diverse set of adverse outcomes relevant to SLE patients that may be preventable if patients receive high-quality ambulatory care. This set of outcomes may be studied at the health system level to determine how to best allocate resources and improve quality to reduce avoidable outcomes and disparities among those at highest risk.

BackgroundVariation in liability to cannabis use disorder has a strong genetic component (estimated twin and family heritability about 50-70%) and is associated with negative outcomes, including increased risk of psychopathology. The aim of the study was to conduct a large genome-wide association study (GWAS) to identify novel genetic variants associated with cannabis use disorder.MethodsTo conduct this GWAS meta-analysis of cannabis use disorder and identify associations with genetic loci, we used samples from the Psychiatric Genomics Consortium Substance Use Disorders working group, iPSYCH, and deCODE (20 916 case samples, 363 116 control samples in total), contrasting cannabis use disorder cases with controls. To examine the genetic overlap between cannabis use disorder and 22 traits of interest (chosen because of previously published phenotypic correlations [eg, psychiatric disorders] or hypothesised associations [eg, chronotype] with cannabis use disorder), we used linkage disequilibrium score regression to calculate genetic correlations.FindingsWe identified two genome-wide significant loci: a novel chromosome 7 locus (FOXP2, lead single-nucleotide polymorphism [SNP] rs7783012; odds ratio [OR] 1·11, 95% CI 1·07-1·15, p=1·84 × 10-9) and the previously identified chromosome 8 locus (near CHRNA2 and EPHX2, lead SNP rs4732724; OR 0·89, 95% CI 0·86-0·93, p=6·46 × 10-9). Cannabis use disorder and cannabis use were genetically correlated (rg 0·50, p=1·50 × 10-21), but they showed significantly different genetic correlations with 12 of the 22 traits we tested, suggesting at least partially different genetic underpinnings of cannabis use and cannabis use disorder. Cannabis use disorder was positively genetically correlated with other psychopathology, including ADHD, major depression, and schizophrenia.InterpretationThese findings support the theory that cannabis use disorder has shared genetic liability with other psychopathology, and there is a distinction between genetic liability to cannabis use and cannabis use disorder.FundingNational Institute of Mental Health; National Institute on Alcohol Abuse and Alcoholism; National Institute on Drug Abuse; Center for Genomics and Personalized Medicine and the Centre for Integrative Sequencing; The European Commission, Horizon 2020; National Institute of Child Health and Human Development; Health Research Council of New Zealand; National Institute on Aging; Wellcome Trust Case Control Consortium; UK Research and Innovation Medical Research Council (UKRI MRC); The Brain & Behavior Research Foundation; National Institute on Deafness and Other Communication Disorders; Substance Abuse and Mental Health Services Administration (SAMHSA); National Institute of Biomedical Imaging and Bioengineering; National Health and Medical Research Council (NHMRC) Australia; Tobacco-Related Disease Research Program of the University of California; Families for Borderline Personality Disorder Research (Beth and Rob Elliott) 2018 NARSAD Young Investigator Grant; The National Child Health Research Foundation (Cure Kids); The Canterbury Medical Research Foundation; The New Zealand Lottery Grants Board; The University of Otago; The Carney Centre for Pharmacogenomics; The James Hume Bequest Fund; National Institutes of Health: Genes, Environment and Health Initiative; National Institutes of Health; National Cancer Institute; The William T Grant Foundation; Australian Research Council; The Virginia Tobacco Settlement Foundation; The VISN 1 and VISN 4 Mental Illness Research, Education, and Clinical Centers of the US Department of Veterans Affairs; The 5th Framework Programme (FP-5) GenomEUtwin Project; The Lundbeck Foundation; NIH-funded Shared Instrumentation Grant S10RR025141; Clinical Translational Sciences Award grants; National Institute of Neurological Disorders and Stroke; National Heart, Lung, and Blood Institute; National Institute of General Medical Sciences.