Search

Introduction: The underlying pathophysiology of diabetes mellitus after acute pancreatitis is unknown and overall risk of developing diabetes postacute pancreatitis in children is understudied. The objective of our study was to describe the frequency of islet cell autoimmunity and abnormal glucose testing in pediatric patients in the year following their index case of acute pancreatitis., Materials and Methods: Data were obtained from a single-center observational cohort study of patients with their first episode of acute pancreatitis. Islet cell autoantibody titers were measured on stored plasma collected from acute pancreatitis diagnosis, at 3 months and at 12 months postacute pancreatitis attack. Abnormal glucose testing was defined as the presence of prediabetes or diabetes, as defined by American Diabetes Association criteria., Results: Eighty-four patients with acute pancreatitis and islet cell autoantibody data were included, 71 had available glucose measures. Median age at first acute pancreatitis attack was 14 years (IQR 8.7-16.3) and 45/84 (54%) were females. Twenty-four patients (29%) were positive for at least one of four islet cell autoantibodies (IAA, GADA, IA-2A, and ZnT8A) and 6 (7%) had two or more positive islet cell autoantibodies. Nineteen patients out of 71 (27%) had abnormal glucose testing at or postacute pancreatitis diagnosis. A higher proportion (37%, 7/19) with abnormal glucose testing had severe acute pancreatitis compared to those with normal glucose testing (13%, 7/52) ( p = 0:04). Patients with normal glucose testing were more likely to be positive for one or more islet cell autoantibodies (31%, 16/52) compared to those with abnormal glucose testing (0%, 0/19) ( p = 0:004)., Conclusions: Islet cell autoimmunity is more common in children after their index acute pancreatitis attack (29%) than in the general population (7%-8%). While the frequency of prediabetes and diabetes postacute pancreatitis is high, other mechanisms besides islet cell autoimmunity are responsible., Competing Interests: M.D.B serves as research support for Dexcom © and Viacyte © and is also on the advisory boards of Vertex ©, Insulet ©, Ariel Precision Medicine ©. However, none of these companies provided funding for this study. M.A.H is a board member of the National Pancreas Foundation and the current president and board member of the Collaborative Alliance of Pancreatic Education and Research CAPER.

Nutrition research continues to be important for consumers to make informed food purchasing decisions and is used in nutrition policy decisions. The objective of this study was to analyze the nutrient concentration of raw and cooked cuts from special-fed veal calves to update nutrient data in the USDA National Nutrient Database for Standard Reference (SR) Release 27. Packages of wholesale (whole loin roasts, center-cut hindshanks and ground veal) and retail veal cuts (osso buco foreshanks, loin chops, leg cutlets and shoulder blade chops) were randomly collected in original vacuum packaging from six U.S. suppliers. Packages were shipped to the Colorado State University Meat Laboratory for cut dissection, cooking, and nutrient analysis. Composites of lean, external fat and seam fat were formed for analysis of proximate, fatty acid, vitamin and mineral composition. Results from this study identified additional fatty acids, established choline concentration, and provided updated veal nutrient composition information for inclusion in USDA SR 27., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This study examined the effects of USDA carcass maturity on sensory properties of LM steaks produced by cattle representing 2 dental age classes. Carcasses identified for use in the experiment were produced by steers and heifers classified as either <30 mo of age (MOA) or ≥30 MOA at the time of slaughter using dentition. Within each dental age class, carcasses were selected to represent 2 maturity groups and 3 marbling categories, resulting in 12 dental age × maturity × marbling subclasses, each consisting of 50 carcasses. Maturity groups consisted of carcasses classified by USDA graders as either A to A (A) overall maturity or B to D (B-D) overall maturity; marbling categories consisted of carcasses with instrument marbling scores of Slight to Slight (SL), Small to Small (SM), or Modest to Moderate (MT-MD). Carcasses were selected in pairs so that each carcass chosen to represent the B-D-maturity group was paired with an A-maturity carcass of the same sex and marbling score (±50 marbling units). Strip loin (LM) steaks were obtained from both sides of each carcass. After a 14-d aging period, 1 LM steak was measured for Warner-Bratzler shear force (WBSF) and slice shear force (SSF), whereas the other LM steak was used for sensory analysis by a trained descriptive attribute panel. No differences ( > 0.05) in LM tenderness, juiciness, or flavor were detected between carcass maturity groups in either dental age class. Advanced dental age (≥30 MOA), however, was associated with more intense ( < 0.05) grassy and bloody/serumy flavors and decreased ( < 0.05) tenderness within the SL marbling group. Marbling score effectively stratified carcasses (MT-MD > SM > SL) according to differences ( < 0.0001) in LM tenderness, juiciness, beefy/brothy flavor, and buttery/beef fat flavor. In addition, increased marbling was associated with lesser ( < 0.01) intensities of bloody/serumy, livery/organy, and grassy flavors as well as smaller ( < 0.0001) values for WBSF and SSF. Results of this study suggest that USDA carcass maturity does not effectively identify differences in LM sensory attributes in the population of beef carcasses routinely offered for grading in today's U.S. commercial beef processing facilities.

Sensory analysis of ground LL samples representing 12 beef product categories was conducted in 3 different regions of the U.S. to identify flavor preferences of beef consumers. Treatments characterized production-related flavor differences associated with USDA grade, cattle type, finishing diet, growth enhancement, and postmortem aging method. Consumers (N=307) rated cooked samples for 12 flavors and overall flavor desirability. Samples were analyzed to determine fatty acid content. Volatile compounds produced by cooking were extracted and quantified. Overall, consumers preferred beef that rated high for beefy/brothy, buttery/beef fat, and sweet flavors and disliked beef with fishy, livery, gamey, and sour flavors. Flavor attributes of samples higher in intramuscular fat with greater amounts of monounsaturated fatty acids and lesser proportions of saturated, odd-chain, omega-3, and trans fatty acids were preferred by consumers. Of the volatiles identified, diacetyl and acetoin were most closely correlated with desirable ratings for overall flavor and dimethyl sulfide was associated with an undesirable sour flavor., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Individuals who suffer from schizophrenia comprise I percent of the United States population and are four times more likely to die of suicide than the general US population. Identification of at-risk individuals with schizophrenia is challenging when they do not seek treatment. Microblogging platforms allow users to share their thoughts and emotions with the world in short snippets of text. In this work, we leveraged the large corpus of Twitter posts and machine-learning methodologies to detect individuals with schizophrenia. Using features from tweets such as emoticon use, posting time of day, and dictionary terms, we trained, built, and validated several machine learning models. Our support vector machine model achieved the best performance with 92% precision and 71% recall on the held-out test set. Additionally, we built a web application that dynamically displays summary statistics between cohorts. This enables outreach to undiagnosed individuals, improved physician diagnoses, and destigmatization of schizophrenia.

A survey was conducted from November 2009 to April 2010 to determine how importers of pork define 7 predetermined quality categories (food safety, customer service, eating quality, product specification, packaging, visual characteristics, and production history) and to estimate willingness-to-pay (WTP) and establish best-worst (B/W) scaling (rank) for the 7 quality categories. Interviews were conducted in Hong Kong/China (n = 83), Japan (n = 48), Mexico (n = 70) and Russia (n = 54) with importers of U.S. pork or those who had purchased U.S. pork from distributors in the last 3 yr. Interviews used dynamic routing software and were structured such that economic factors for purchase were addressed first, allowing all responses to focus on quality. Questions about WTP and B/W were asked and then each respondent was asked to define what each quality category meant to them. Generalized linear mixed models were used to analyze frequency data. Over 70% of interviewees in Hong Kong/China, Japan, and Mexico responded that purchase price was influential in deciding whether or not to purchase imported pork. This number was lower in Russia, where respondents stated tariff rates were also important, indicating market access was a larger issue in Russia. Food safety was the most important quality category (price was not included as a part of quality) for imported pork followed by specifications. Respondents indicated some form of government inspection was how they defined food safety, whereas product size, weight, and subcutaneous fat were all included in the definition of specifications. Interviewees were more likely to pay premiums for customer service and less likely to pay premiums for packaging (P < 0.05). The premiums that were willing to be paid for guarantees of quality for imported pork variety meats were numerically lower than for whole muscle cuts or processed products. A guarantee associated with food safety of processed pork products was found to be the quality attribute for which importers would be willing to pay the highest premium. Production history was found to be the least important quality attribute for importers of all types of U.S. pork, except those in Japan. Exporters could increase profitability if a guarantee of customer service was made. Price, tariffs, and exchange rates are important to pork importers; these results indicated that if certain quality attributes could be guaranteed, exporters could increase profitability.

For generations, those that produce livestock and meat generally felt that their country or geographical region (i.e., provenance) reflected a basis for product differentiation. This occurs to the extent that geography of production often is considered a "brand." For example, there exists "U.S. Grain-Fed Beef" or "Kobe Black Wagyu" or "Uruguayan Grass-Fed Lamb" or "Danish Pork." However, for most meat trade, industry has evolved beyond this. With the exception perhaps of farms onto which livestock are born, meat company's profits are not generally tied to geographical considerations. Most major companies (e.g., JBS, Marfrig, Tyson, Cargill, Danish Crown, Nippon Meat Packers, etc.) operate in multiple countries and represent to consumers the production of a number of locations. However, there also now exist entrepreneurial options for meat production and "local" sales, albeit at lesser volumes. This discussion explores "global" and "local" meat marketing options., (Copyright © 2014. Published by Elsevier Ltd.)

This study compared sensory properties of LM steaks from A maturity and B maturity or older carcasses that were produced by grain-finished steers and heifers classified as less than 30 mo old at the time of slaughter using dentition. Carcasses were selected to represent 2 maturity groups and 3 marbling categories within each maturity group, resulting in 6 maturity × marbling subclasses, each subclass consisting of 75 carcasses. Maturity groups consisted of carcasses classified by USDA graders as either A(00) to A(99) overall (A) maturity or B(00) to C(99) overall (B-C) maturity; marbling categories consisted of carcasses with instrument marbling scores of Slight (SL), Small (SM), or Modest(00) or greater (MT+). Carcasses were selected in pairs so that each carcass chosen to represent the B-C maturity group was paired with an A maturity carcass of the same sex and marbling score (± 30 marbling units). Strip loin (LM) steaks were obtained from both sides of each carcass. After a 14-d aging period, 1 LM steak was measured for Warner-Bratzler shear force (WBSF) and slice shear force (SSF), whereas the other LM steak was used for sensory analysis by a trained descriptive attribute panel. No differences (P > 0.05) in WBSF, SSF, or sensory panel ratings for tenderness, juiciness, or flavor were detected between LM steaks from carcasses classified as A maturity and steaks from B-C maturity carcasses. However, marbling categories effectively stratified carcasses (MT+ > SM > SL) according to differences (P < 0.0001) in LM tenderness, juiciness, meaty/brothy flavor, and buttery/beef fat flavor. Increased marbling also was associated with lesser (P < 0.01) intensities of bloody/serumy and livery/organy flavors and reduced (P < 0.01) values for WBSF and SSF. Of the traits tested, only bloody/serumy flavor was affected (P < 0.05) by the maturity × marbling interaction. Interaction means showed that LM steaks from B-C maturity carcasses with SL marbling had a less intense bloody/serumy flavor than did steaks from A maturity carcasses with SL marbling. Results of this study suggest that, when applied to carcasses from grain-finished cattle whose dental ages are less than 30 mo old at the time of slaughter, USDA quality grades would be no less effective in identifying eating quality differences if the A and B-C maturity groups were combined and quality grades were assigned using only marbling.

British × Continental steers (initial BW = 484.6 kg) were fed at a commercial feed yard to evaluate the effects of β-agonists on live performance, carcass characteristics, and carcass subprimal yield. Weights and ultrasonic measurements were used to allocate steers to pens (n = 40) divided equally into 4 blocks, with 2 treatment replicates per block. Pens were randomly assigned to 1 of 5 treatments: control; ractopamine-HCl (RH) fed at 200 or 300 mg • steer(-1) • d(-1), or 400 mg • steer(-1) • d(-1) top dress for the final 30 d of feeding; or zilpaterol-HCl (ZH) fed at 7.5 mg/kg beginning 23 d before slaughter with a 3-d withdrawal period. Steers were harvested by block at a commercial facility over 4 wk. Carcass based performance measures were calculated using initial pen weights and actual DMI. From each pen, eight carcasses that were within ± 13.6 kg of the mean pen HCW were selected such that two carcasses were within each of the following four Yield Grade (YG) ranges: YG ≤ 2.8; 2.9-3.2; 3.3-3.5; YG > 3.5. Carcasses were fabricated by plant personnel to determine subprimal yield. Steers fed ZH had higher carcass-based ADG and carcass-based G:F compared with all other treatments (P < 0.05). Carcass-based ADG and carcass-based G:F were higher in RH treatments compared with controls (P < 0.05). Steers fed ZH had higher dressing percentages (1.0 to 1.6%) and larger LM area (4.3 to 6.7 cm(2)) than all other treatments (P < 0.05). Use of RH 400 and ZH increased HCW 6.3 and 11.1 kg, respectively compared with controls (P < 0.05). Compared with controls, RH 300 and ZH decreased marbling score and the frequency of carcasses qualifying for upper 2/3 Choice premiums (P < 0.05). Beta-agonists increased subprimal yield from the round and loin; however, blade meat was the only cut from the rib or chuck affected by β-agonists. Results from this study indicated improvements in performance and carcass traits as a result of β-agonist use; however, differences between ZH, RH 400, and RH 300 treatments were minimal for carcass traits and cutability. Increases in saleable yield following β-agonist use were not uniformly distributed across the four major primals and the majority of weight gain occurred in the lower priced cuts of the round and chuck. Increased response of the lower priced cuts to β-agonists could have economic implications to packers.

The effect of ractopamine hydrochloride (RH) and zilpaterol hydrochloride (ZH) on slice shear force (SSF) and sensory characteristics of beef from calf-fed Holstein steers was evaluated. All steers were implanted with a progesterone (100 mg) plus estradiol benzoate (10 mg) implant followed by a terminal trenbolone acetate (200 mg) plus estradiol (40 mg) implant. Steers were blocked by weight into pens (n = 32) randomly assigned to 1 of 4 treatments: control, RH fed at 300 mg·steer(-1)·d(-1) (RH 300) or RH fed at 400 mg·steer(-1)·d(-1)(RH 400) for the final 31 d of finishing, or ZH fed at 6.8 g/t for 21 d with a 5-d withdrawal before harvest. Fourteen carcasses were randomly selected from each pen, and two LM samples (1 per side) were excised and aged either 14 or 21 d before SSF testing. For trained panel evaluation, two steaks were collected from each of 60 low Choice strip loins (20 each from control, RH 300, and ZH treatments) and aged either 14 or 21 d. Steers fed RH and ZH produced steaks with SSF values that were 9% to 25% higher than controls. No difference in SSF was detected between the two levels of RH (P > 0.05). Compared to controls, the probability of steaks aged 14 d failing to meet SSF requirements to be certified tender (SSF < 20 kg) was increased 0.15, 0.17, and 0.26 in steers fed RH 300, RH 400, and ZH, respectively. Compared to controls, the probability of steaks aged 21 d having SSF values >20 kg was increased 0.03, 0.08, and 0.16 in steers fed RH 300, RH 400, and ZH, respectively. Steaks from Select carcasses of steers fed ZH aged 21 d postmortem had double the probability (0.39 vs. 0.17) of having SSF values >20 kg compared to steaks from steers fed either level of RH (P < 0.05). This difference tended to be identical in steaks from Select carcasses 14 d postmortem (0.50 vs. 0.33; P = 0.11); however, no difference was found in low Choice samples at 14 or 21 d postmortem. Trained panelists rated steaks aged 14 d from steers fed ZH lower for overall tenderness and flavor compared to controls (P < 0.05); however, no difference was found between controls and those fed RH 300. Steaks from steers fed ZH aged 21 d were rated lower for overall tenderness and juiciness compared to controls and those from steers fed RH 300 (P < 0.05). This study suggests RH and ZH negatively impact sensory attributes of beef from calf-fed Holstein steers.

Effects of ractopamine hydrochloride (RH) and zilpaterol hydrochloride (ZH) on saleable yield of carcass sides from calf-fed Holstein steers were evaluated using steers implanted with a progesterone (100 mg) plus estradiol benzoate (10 mg) implant followed by a terminal trenbolone acetate (200 mg) plus estradiol (40 mg) implant. Steers were blocked by weight into pens (n = 32) randomly assigned to one of four treatments: control, RH fed at 300 mg•steer(-1)/d(-1) (RH 300) or RH fed at 400 mg•steer(-1)/d(-1) (RH 400) the final 31 d of finishing, and ZH fed at 60 to 90 mg•steer(-1)/d(-1) (7.56 g/ton on a 100% DM basis) for 21 d with a 5 d withdrawal before harvest. Eight to nine carcass sides were randomly selected from each pen; carcass sides with excessive hide pulls, fat pulls or bruises were avoided. Cutout data were collected within a commercial facility using plant personnel to fabricate sides at a rate of one every 3 to 4 min into items typically merchandised by the facility. All lean, fat and bone were weighed and summed back to total chilled side weight with a sensitivity of ± 2% to be included in the data set. Compared to controls, β-agonists increased saleable yield of whole-muscle cuts by 0.61%, 0.86% and 1.95% for RH 300, RH 400 and ZH, respectively (P < 0.05). Percent fat was less in carcasses from the ZH treatment compared to controls (P < 0.05); however, this difference was not observed between RH treatments and controls (P > 0.05). Percent bone was less in the ZH treatment due to increased muscle (P < 0.05). The percent of chilled side weight comprised of trimmings was unchanged between treatments, but on a 100% lean basis, RH 400 and ZH increased trim yields (P < 0.05). Analysis of saleable yield by primal showed a fundamental shift in growth and development. Beta-agonists caused a shift in proportion of saleable yield within individual primals, with a greater portion produced from the hindquarter relative to the forequarter, specifically in those muscles of the round (P < 0.05). Beta-agonists increased saleable yield, but these effects were not constant between all major primals. The cutout value gained by packers as a result of β-agonist use may be influenced more by reduced fatness and increased absolute weight if musculature is primarily increased in the lower priced cuts of the carcass.

Effect of ractopamine hydrochloride (RH) and zilpaterol hydrochloride (ZH) on LM shear force and sensory attributes was determined using pens (n = 40) British × Continental crossbred steers randomly allocated to one of the following treatments: control; RH fed at 200 (RH 200) or 300 mg • steer(-1) • d(-1) (RH 300), or 400 mg • steer(-1) • d(-1) (RH 400) top-dressed for the final 30 d of feeding; or ZH fed at 7.5 mg/kg, beginning 23 d before slaughter with a 3-d withdrawal. Two replicates (pens) per treatment were represented in four blocks. Eighteen carcasses per pen were randomly selected and one 5-cm LM sample was removed from both carcass sides to be used for shear force and sensory evaluation. Samples were aged for 14 d, frozen at -28.8 °C, and cut into 2.5-cm steaks. All steaks were cooked to an internal temperature of 71.1 °C before being evaluated for Warner-Bratzler shear force (WBSF), slice shear force (SSF), or being fed to trained sensory panelists. Increasing dose and potency of β-agonist increased WBSF by 4 to 17% and SSF by 5 to 24% (P < 0.05). Steaks from steers fed ZH had higher WBSF and SSF values compared with all other treatments (P < 0.05), whereas steaks from controls and steers fed RH 200 were not different (P > 0.05). Probability of steaks failing to meet shear force standards to be certified tender (WBSF <4.4 kg, SSF < 20 kg) was increased from an initial probability of <0.06 in steaks from steers in the control treatment to 0.10 to 0.20 in steers fed RH 400 or ZH (P < 0.05). No difference was detected in panel ratings for overall tenderness of steaks from steers fed RH 200 compared with controls (P > 0.05). Steaks from steers fed RH 300 and RH 400 were comparable for all sensory attributes; however, both RH 300 and RH 400 were rated lower for overall tenderness than controls (P < 0.05). Panelists failed to detect differences in overall tenderness of steaks from steers fed RH 400 and ZH (P < 0.05). Panelists detected no difference in flavor profile or juiciness among treatments (P > 0.05). Results from this study indicated β-agonists negatively affected beef tenderness and these effects may be more noticeable in steers supplemented with ZH and higher doses of RH.

Fifty-four stores in 30 U.S. cities were sampled from June 2011 through May 2012 to benchmark beef tenderness at retail, as assessed by Warner-Bratzler shear force (WBSF). Top loin (Longissimus dorsi; n = 980) and sirloin (Gluteus medius and Biceps femoris; n = 860) steaks were collected at random (Quality Grade and brand) and shipped via overnight delivery to Colorado State University. From June 2011 through November 2011, North American Beef Tenderness Survey (NABTS) Period 1, samples were shipped fresh and then frozen. Mean WBSF values during Period 1 were 2.9 and 3.5 kg for top loin and sirloin steaks, respectively. Frequencies of steaks classified as tough (WBSF ≥ 4.4 kg) were 8.6% and 17.7% for top loin and sirloin steaks, respectively. When shipped fresh, a disproportionately high frequency (16.9%) of top loin steaks had WBSF ≤ 2.0 kg, representing a deviation from previous works. Two trials were conducted to assess the effect of freezing, retail display, and shipping on WBSF and slice shear force (SSF) of beef top loin steaks. Freezing, retail display, and shipment reduced WBSF by 0.4, 0.3, and 0.0 kg during Trial 1, and by 0.4, 0.3, and 0.1 kg during Trial 2. Slice shear force was lower (P < 0.05) in steaks exposed to shipping conditions during Trial 1; however, this difference was not observed in Trial 2. Shipping decreased the frequency of steaks categorized as tough (SSF ≥ 20.0 kg) from 11.1 to 5.7% and from 30.5 to 28.6%, during Trial 1 and 2, respectively. During Trial 1, WBSF indicated that shipping increased incidence of tough samples from 0.0 to 3.8%, but this trend was reversed during Trial 2 when shipping reduced incidence of tough samples from 13.0 to 5.6%. Coefficients of variation for treatment effects suggested variance remained unchanged (± 2.0%), with respect to shear force values. However, mean values were reduced as a result of shipping conditions. These findings dictated a change in NABTS protocol from December 2011 through May 2012 (Period 2), during which time samples were shipped frozen. Mean WBSF values were 3.4 and 4.0 kg for top loin and sirloin samples, respectively. Frequencies of steaks classified as tough were 14% and 23.5% for top loin and sirloin steaks, respectively. These findings suggest that freezing samples before shipment may influence shear force of steaks collected at the retail level. These data should be considered when evaluating beef tenderness surveys and in the design of future works.

The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.

This study quantified relationships between USDA instrument marbling measurements and LM sensory attributes (tenderness, flavor, juiciness), and shear force. Heifer (n = 390) and steer (n = 328) carcasses (all A-maturity) were selected at 4 beef processing plants in Colorado, Kansas, Nebraska, and Texas to represent 7 marbling degrees: traces (TR), slight (SL), small (SM), modest (MT), moderate (MD), slightly abundant (SA), and moderately abundant (MA). Classification into marbling groups was based on marbling scores determined using USDA-approved VBG 2000 grading systems. Strip loin steaks were obtained from both sides of each carcass and aged for 14 d. One steak was used to obtain Warner-Bratzler shear force (WBSF) and slice shear force (SSF) measurements. The other steak was evaluated by a trained sensory panel for juiciness, tenderness, intensity of flavors characterized as meaty/brothy, buttery/beef fat, bloody/serumy, livery/organy, and grassy; and overall sensory experience (negative or positive). Instrument marbling score explained 45%, 40%, 32%, 71%, and 61% of the observed variation in panel ratings for juiciness, tenderness, meaty/brothy flavor intensity, buttery/beef fat flavor intensity, and overall sensory experience, respectively. Increased degree of marbling resulted in steaks having greater (P < 0.001) juiciness (MA > SA > MD > MT > SM > SL = TR), meaty/brothy flavor (MA = SA > MD = MT > SM > SL > TR), and buttery/beef fat flavor (MA > SA > MD > MT > SM > SL > TR). Steak tenderness also increased (P < 0.001) as marbling degree increased; however, tenderness differences among marbling degrees differed for steers (MA = SA > MD = MT > SM > SL = TR) and heifers (MA = SA > MD > MT > SM > SL > TR). Steaks produced by steers had lower (P < 0.05) WBSF and SSF values, and were rated as more tender by sensory panelists than steaks produced by heifers, but the effect of sex on panel tenderness was significant only among steaks with TR marbling. Results of this study showed that instrument-based classification of beef carcasses, according to differences in marbling, effectively identified subsequent differences in strip loin steak sensory performance. Nearly all (98 to 99%) steaks with MA or SA marbling, and most (between 80% and 90%) steaks with MD and MT marbling, received positive ratings for overall sensory experience. In comparison, 62% of SM steaks, 29% of SL steaks, and 15% of TR steaks received positive sensory experience ratings.

The National Beef Quality Audit-2011 (NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processing facilities. Cattle identification methods were lot visual tags (85.7%), individual visual tags (50.6%), electronic tags (20.1%), metal-clip tags (15.7%), other (5.3%), none (2.5%), and wattles (0.5%). Hide colors or breed types were black (61.1%), red (12.8%), yellow (8.7%), Holstein (5.5%), brown (5.0%), gray (5.0%), white (1.4%), and brindle (1.0%). Brand frequencies were none (55.2%), 1 (40.4%), 2 (4.4%), and 3 or more (0.04%) brands, and brands were located on the butt (35.2%), side (9.0%), and shoulder (2.5%). Hide locations of mud or manure were no mud/manure (49.2%), legs (36.8%), belly (23.7%), side (14.9%), top-line (11.0%), and tail region (13.7%). There were 76.2% of cattle without horns, and the majority of those with horns (71.6%) were between 0 cm and 12.7 cm in length. Permanent incisor numbers were zero (87.3%), 1 (1.4%), 2 (8.0%), 3 (0.9%), 4 (1.9%), 5 (0.3%), 6 (0.2%), 7 (0.1%), and 8 (0.02%). Most carcasses (77.0%) were not bruised, 18.7% had 1 bruise, 3.4% had 2 bruises, 0.6% had 3 bruises, and 0.3% had more than 3 bruises. Bruise locations were loin (50.1%), rib (21.3%), chuck (13.8%), round (7.3%), and brisket/flank/plate (7.5%). Condemnation item and incidence were whole carcass (none recorded), liver (20.9%), lungs (17.3%), tongue (10.0%), viscera (9.3%), and head (7.2%). Compared with the NBQA-2005, the NBQA-2011 had an increased percentage of black-hided cattle (56.3 vs. 61.1%), more cattle with brands (38.7 vs. 44.8%), and more cattle with some form of identification (93.3 vs. 97.5%). In addition, there was a lesser percentage of carcasses with bruising in 2011 (23.0%) than in 2005 (35.2%), as well as a smaller percentage of carcasses with more than 1 bruise (2005 = 9.4% vs. 2011 = 4.2%). Compared with the 2005 audit, a similar percentage of the cattle were deemed 30 mo of age or older using dentition (2005 = 2.7% vs. 2011 = 3.3%). The information from NBQA-2011 helps the beef industry measure progress against previous NBQA assessments and provides a benchmark for future educational and research activities.

The instrument grading assessments for the 2011 National Beef Quality Audit evaluated seasonal trends of beef carcass quality and yield attributes over the course of the year. One week of instrument grading data, HCW, gender, USDA quality grade (QG), and yield grade (YG) factors, were collected every other month (n = 2,427,074 carcasses) over a 13-mo period (November 2010 through November 2011) from 4 beef processing corporations, encompassing 17 federally inspected beef processing facilities, to create a "snapshot" of carcass quality and yield attributes and trends from carcasses representing approximately 8.5% of the U.S. fed steer and heifer population. Mean yield traits were YG (2.86), HCW (371.3 kg), fat thickness (1.19 cm.), and LM area (88.39 cm(2)). The YG distribution was YG 1, 15.7%; YG 2, 41.0%; YG 3, 33.8%; YG 4, 8.5%; and YG 5, 0.9%. Distribution of HCW was <272.2 kg, 1.6%; 272.2 to 453.6 kg, 95.1%; and ≥453.6 kg, 3.3%. Monthly HCW means were November 2010, 381.3 kg; January 2011, 375.9 kg; March 2011, 366.2 kg; May 2011, 357.9 kg; July 2011, 372.54 kg; September 2011, 376.1 kg; and November 2011, 373.5 kg. The mean fat thickness for each month was November 2010, 1.30 cm; January 2011, 1.22 cm; March 2011, 1.17 cm; May 2011, 1.12 cm; July 2011, 1.19 cm; September 2011, 1.22 cm; and November 2011, 1.22 cm. The overall average marbling score was Small(49). The USDA QG distribution was Prime, 2.7%; Top Choice, 22.9%; Commodity Choice, 38.6%; and Select, 31.5%. Interestingly, from November to May, seasonal decreases (P < 0.001) in HCW and fat thicknesses were accompanied by increases (P < 0.001) in marbling. These data present the opportunity to further investigate the entire array of factors that determine the value of beef. Data sets using the online collection of electronic data will likely be more commonly used when evaluating the U.S. fed steer and heifer population in future studies.

The 2011 National Beef Quality Audit (NBQA-2011) assessed the current status of quality and consistency of fed steers and heifers. Beef carcasses (n = 9,802), representing approximately 10% of each production lot in 28 beef processing facilities, were selected randomly for the survey. Carcass evaluation for the cooler assessment of this study revealed the following traits and frequencies: sex classes of steer (63.5%), heifer (36.4%), cow (0.1%), and bullock (0.03%); dark cutters (3.2%); blood splash (0.3%); yellow fat (0.1%); calloused rib eye (0.05%); overall maturities of A (92.8%), B (6.0%), and C or greater (1.2%); estimated breed types of native (88.3%), dairy type (9.9%), and Bos indicus (1.8%); and country of origin of United States (97.7%), Mexico (1.8%), and Canada (0.5%). Certified or marketing program frequencies were age and source verified (10.7%), ≤A(40) (10.0%), Certified Angus Beef (9.3%), Top Choice (4.1%), natural (0.6%), and Non-Hormone-Treated Cattle (0.5%); no organic programs were observed. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (374.0 kg), adjusted fat thickness (1.3 cm), LM area (88.8 cm2), and KPH (2.3%). Frequencies of USDA YG distributions were YG 1, 12.4%; YG 2, 41.0%; YG 3, 36.3%; YG 4, 8.6%; and YG 5, 1.6%. Mean USDA quality grade (QG) traits were USDA quality grade (Select(93)), marbling score (Small(40)), overall maturity (A(59)), lean maturity (A(54)), and skeletal maturity (A(62)). Frequencies of USDA QG distributions were Prime, 2.1%; Choice, 58.9%; Select, 32.6%; and Standard or less, 6.3%. Marbling score distribution was Slightly Abundant or greater, 2.3%; Moderate, 5.0%; Modest, 17.3%; Small, 39.7%; Slight, 34.6%; and Traces or less, 1.1%. Carcasses with QG of Select or greater and YG 3 or less represented 85.1% of the sample. This is the fifth benchmark study measuring targeted carcass characteristics, and information from this survey will continue to help drive progress in the beef industry. Results will be used in extension and educational programs as teaching tools to inform beef producers and industry professionals of the current state of the U.S. beef industry.

The objective of this study was to determine the optimal postmortem aging period and nutrient composition for Beef Value Cuts of the round. Forty USDA Select and 40 Premium USDA Choice beef carcasses were selected from a commercial beef packing plant in Colorado over a 12-wk period. The bottom and inside rounds were collected from both sides of each carcass for further fabrication into the following muscles: adductor, gastrocnemius, gracilis, pectineus, and superficial digital flexor. Each pair of muscles was cut into 7 steaks and randomly assigned to 1 of the following aging periods: 2, 4, 6, 10, 14, 21, and 28 d, and placed in refrigerated storage (2°C, never frozen). Upon completion of the designated aging period, steaks were removed from storage, cooked to a peak internal temperature of 72°C, and evaluated using Warner-Bratzler shear force (WBSF). A 2-way interaction was detected (P < 0.05) between individual muscle and postmortem aging period. The WBSF of all muscles except the superficial digital flexor decreased with increased time of postmortem aging. Quality grade did not affect (P > 0.05) WBSF values for the adductor, gastrocnemius, pectineus, and superficial digital flexor muscles. Exponential decay models were used to predict the change in WBSF from 2 to 28 d postmortem (aging response). The adductor, gastrocnemius, Select gracilis, Premium Choice gracilis, and pectineus required 21, 14, 23, 23, and 25 d, respectively, to complete the majority of the aging response. To determine the nutrient composition of the adductor, gastrocnemius, gracilis, pectineus, semimembranosus, and superficial digital flexor, bottom and inside rounds were collected from 10 USDA Select and 10 Premium USDA Choice carcasses and fabricated into the respective muscles, cut into 2.54-cm cubes, frozen (-20°C), and then homogenized. The adductor, gracilis, pectineus, semimembranosus, and superficial digital flexor were analyzed for DM, moisture, CP, and ash percentages. All muscles were evaluated for total lipid, fatty acid, and cholesterol composition. When quality grades were combined, all muscles fell into the extra lean or lean categories specified by USDA guidelines. Results of this study illustrate the potential for Beef Value Cuts of the round to be sold in food service operations and retail stores with marketing emphasis being placed on the exceptional leanness and acceptable tenderness of these cuts.

Effects of genotype (GEN) and implant program (IMP) on LM and gluteus muscle (GM) tenderization were investigated using crossbred steer (n = 185) and heifer (n = 158) calves. The 3-marker GeneSTAR Tenderness panel [CAST (calpastatin), CAPN1 316 (µ-calpain), and CAPN1 4751 (µ-calpain)] was used to determine the GEN of each animal (reported as total number of favorable alleles, 0 through 6). Calves were randomly assigned to 1 of 2 IMP, conventional (CNV) or delayed. Cattle in the CNV group were implanted at the beginning of the finishing period with Revalor-IS or Revalor-IH (Intervet Inc., Millsboro, DE), and then reimplanted 59 d later with Revalor-S or Revalor-H (Intervet Inc.). Calves in the delayed group received a single terminal implant (Revalor-S or Revalor-H) administered 45 d after initiation of the finishing period. Warner-Bratzler shear force (WBSF) was measured on LM and GM steaks at 3, 7, 14, 21, and 28 d postmortem. No interactions between the main effects of sex, IMP, or GEN were detected (P > 0.05) for WBSF. An IMP × postmortem aging (age) interaction was detected (P < 0.05) for LM and GM WBSF. For both muscles, steaks from CNV cattle had WBSF values that were approximately 0.2 kg greater (P < 0.05) than the values for steaks from delayed animals, but only during the early postmortem period (3 to 7 d). A linear effect of GEN on WBSF was detected (P < 0.05) for LM and GM steaks. Within each muscle, steaks from cattle with 6 favorable alleles had WBSF values 0.33 kg less than the values for steaks from cattle with 1 favorable allele. The GEN × age interaction was not significant for LM (P = 0.14) or GM (P = 0.20), but a numerical trend was observed for the effect of GEN on WBSF to diminish as age increased. To investigate how genetic markers could be interfaced with current beef carcass quality grading, cattle were sorted into 2 gene marker groups (GMG), ≤3 vs. ≥4 favorable alleles. For both muscles, GMG was effective only at identifying tenderness differences within the Select grade. When aged ≤14 d, Select LM steaks from cattle with ≥4 alleles had smaller (P < 0.05) WBSF values than did LM steaks from animals with ≤3 alleles. Preslaughter factors (sex, IMP, and GMG) controlled in the present study each accounted for less than 7% of the explained variation in tenderness of the test population. Results from this study suggest that the 3 GeneSTAR Tenderness markers were associated with small differences (0.33 kg) in WBSF and may be useful for increasing the consistency of Select beef, but these specific markers accounted for only a minor amount of variation in beef tenderness.

A 4 × 2 factorial arrangement of treatments (4 growth-enhancement treatments × 2 sex classes) was used to quantify effects of initial implanting (I-implant, d 0), terminal implanting (T-implant, d 63), and feeding ractopamine hydrochloride [RAC, 200 mg/(animal/d)] for the last 28 d on feed on carcass characteristics and LM shear force (WBSF) of calf-fed steers (n = 159) and heifers (n = 132). Growth-enhancement treatments included the following: TRT1, T-implant only; TRT2, I-implant and RAC; TRT3, I-implant and T-implant; TRT4, I-implant, T-implant, and RAC. Growth responses (BW and ADG) were measured in 3 segments of the finishing period: 1) d 0 to 63, 2) d 63 to 28 d before slaughter, and 3) final 28 d. Cattle were slaughtered after 152, 166, or 180 d of finishing; carcass data were collected after a 48-h chill; and LM WBSF was measured at 3, 7, 14, 21, and 28 d postmortem. A priori contrasts were constructed to test effects associated with use vs. exclusion of growth enhancement in each segment of the finishing period. The interaction between sex class and treatment was not significant (P > 0.05) for any trait tested, indicating that the 4 treatments elicited similar effects in both sexes. Initial implanting improved (P < 0.001) ADG from d 0 to 63 by 11.5%, terminal implanting improved (P < 0.001) ADG from d 63 to 28 d before slaughter by 15%, and supplementing twice-implanted cattle with RAC enhanced ADG during the final 28 d of finishing by 12%. Effects of I-implant, T-implant, and RAC resulted in LM area increases of 3 cm(2) (P = 0.015), 6 cm(2) (P < 0.001), and 3 cm(2) (P = 0.011), respectively, and HCW responses of 11 kg (P = 0.011), 16 kg (P = 0.001), and 6 kg (P = 0.195), respectively. Initial implanting resulted in a 20-point reduction (P = 0.097) in marbling, and T-implant reduced marbling by 25 points (P = 0.04), whereas marbling score was unaffected (P = 0.236) by RAC supplementation. Cattle that received only 1 implant (TRT1 and TRT2) produced carcasses with greater (P = 0.026) mean marbling scores and greater (P = 0.01) rates of conformity to beef carcass marketing specifications for HCW, quality grade, yield grade, and LM area than did cattle that were implanted twice (TRT3 and TRT4). Values for LM WBSF were not affected (P > 0.05) by initial or terminal implanting; however, RAC supplementation increased (P = 0.007) mean LM WBSF by 0.23 kg, which translated into a reduction (P = 0.007) in predicted consumer acceptance of LM steaks.

Two experiments were conducted to evaluate effects of ractopamine (RAC) and steroidal implant treatments on performance, carcass traits, blood metabolites, and lipogenic enzyme activity in feedlot cattle. In Exp. 1, yearling steers (n = 486; initial BW = 305 kg) were used in a 3 × 3 factorial arrangement of RAC doses of 0 (R0), 100 (R100), or 200 (R200) mg·steer(-1)·d(-1) fed for 28 d and implant regimens (implant-reimplant) of no implant-no reimplant (NI-NI), 120 mg of trenbolone acetate (TBA) and 24 mg of estradiol-17β (E17B)-no implant (RS-NI), or 80 mg of TBA and 16 mg of E17B followed by 120 mg of TBA and 24 mg of E17B (RI-RS). Except for KPH and skeletal maturity score, no RAC × implant interactions were noted (P > 0.10). Carcasses from R200 were 6.3 kg (P = 0.042) heavier than those from R0. Marbling, calculated empty body fat (EBF), and USDA quality grade did not differ (P > 0.10) among RAC treatments. The RI-RS steers had 12.6 kg (P = 0.001) and 41.1 kg (P < 0.001) greater HCW than RS-NI and NI-NI, respectively. Despite no difference (P > 0.10) in EBF, marbling score was decreased for RI-RS (P < 0.001) and RS-NI (P = 0.001) relative to NI-NI, resulting in 14.6 and 11.4 percentage unit fewer USDA Prime and Choice carcasses with RI-RS (P = 0.008) and RS-NI (P = 0.039) than with NI-NI. In Exp. 2, heifers (n = 48; initial BW = 347 kg) were used in a 3 × 2 factorial arrangement of RAC doses of 0 (R0) or 250 (R250) mg·heifer(-1)·d(-1) and implant regimens of none (NI), 200 mg of TBA (TO), or 200 mg of TBA and 20 mg of E17B (TE). Blood samples were collected at various times during the feeding period, and subcutaneous adipose samples were collected on d 119. For growth and carcass measurements, no RAC × implant interactions (P > 0.10) were detected. The RAC-supplemented heifers had greater HCW (P < 0.10) with no difference in marbling score. For implant regimens, TE heifers had greater HCW than the NI (P = 0.001) and TO (P = 0.037) heifers. Although EBF did not differ among implant treatments (P > 0.10), TE (P = 0.021) and TO (P = 0.039) had fewer Choice carcasses than NI. Heifers with implants had decreased cortisol and increased IGF-1 and NEFA (P < 0.10) compared with NI heifers. An implant × RAC interaction was detected (P = 0.001) for serum urea nitrogen (SUN), with TE and RAC-supplemented heifers having decreased SUN. These data suggest that the effects of implant and RAC on growth and carcass traits are independent and that USDA quality grade and marbling score can differ significantly among carcasses with similar calculated EBF values.

A beef carcass instrument grading system that improves accuracy and consistency of marbling score (MS) evaluation would have the potential to advance value-based marketing efforts and reduce disparity in quality grading among USDA graders, shifts, and plants. The objectives of this study were to use output data from the Video Image Analysis-Computer Vision System (VIA-CVS, Research Management Systems Inc., Fort Collins, CO) to develop an appropriate method by which performance of video image analysis MS output could be evaluated for accuracy, precision, and repeatability for purposes of seeking official USDA approval for using an instrument in commerce to augment assessment of quality grade, and to use the developed standards to gain approval for VIA-CVS to assist USDA personnel in assigning official beef carcass MS. An initial MS output algorithm was developed (phase I) for the VIA-CVS before 2 separate preliminary instrument evaluation trials (phases II and III) were conducted. During phases II and III, a 3-member panel of USDA expert graders independently assigned MS to 1,068 and 1,242 stationary carcasses, respectively. Mean expert MS was calculated for each carcass. Additionally, a separate 3-member USDA expert panel developed a consensus MS for each carcass in phase III. In phase II, VIA-CVS stationary triple-placement and triple-trigger instrument repeatability values (n = 262 and 260, respectively), measured as the percentage of total variance explained by carcasses, were 99.9 and 99.8%, respectively. In phases II and III, 95% of carcasses were assigned expert MS for which differences between individual expert MS, and for which the consensus MS in phase III only, was < or = 96 MS units. Two differing approaches to simple regression analysis, as well as a separate method-comparability analysis that accommodates error in both dependent and independent variables, were used to assess accuracy and precision of instrument MS predictions vs. mean expert MS. Method-comparability analysis was more appropriate in assessing the bias and precision of instrument MS predictions. Ether-extractable fat percentages (n = 257; phase II) differed among MS (P < 0.05) but were not suitable to predict or validate assigned MS. The performance and reproducibility of expert MS assignment in future evaluations was considered, and an official USDA performance standard was established, to which an instrument must conform to be approved for official on-line MS assessment. The VIA-CVS subsequently was approved to assign MS to carcasses on-line after completion of a 2006 USDA instrument approval trial conducted according to methods developed during completion of this study.

A randomized complete block design experiment with 360 single-source black yearling steers (average BW = 316.1 +/- 9.1 kg) fed a 91% concentrate (steam-flaked corn base) diet was conducted to evaluate the effects of supplemental vitamin A (0, 1,103, 2,205, 4,410, or 8,820 IU/kg of dietary DM) on plasma and liver vitamin A and E concentrations, lipogenic enzyme activity, marbling score, and performance of yearling steers. Final BW (586, 580, 590, 585, and 584 kg for 0, 1,103, 2,205, 4,410, and 8,820 IU of supplemental vitamin A/kg of DM, respectively) did not differ (P = 0.39) among treatments. Feed efficiency, ADG, and daily DMI did not differ (P > 0.10) among treatments within each 28-d period or for the overall experiment. From d 57 to slaughter, average DMI (10.33, 10.28, 10.57, 9.75, and 10.22 kg/steer daily for 0, 1,103, 2,205, 4,410, and 8,820 IU of vitamin A/kg of DM, respectively) was less (P < 0.02) by steers receiving 4,410 IU of supplemental vitamin A/kg of dietary DM than for steers in the other treatments. Furthermore, DMI was greater (P = 0.06) for steers receiving 2,205 IU of supplemental vitamin A/kg of dietary DM than for steers receiving 8,820 IU of supplemental vitamin A/kg of DM. Marbling score, HCW, LM area, and 12th-rib fat thickness did not differ (P > 0.10) among treatments. Similarly, the percentage of carcasses grading >or=USDA Choice (62.6, 52.8, 64.0, 58.4, and 58.4% for 0, 1,103, 2,205, 4,410, and 8,820 IU of vitamin A/kg of DM, respectively), Select, or 0.10) among treatments. Except for d 56 (P = 0.050; r = 0.18 for liver retinol), no correlations (P > 0.10) between marbling score and any plasma or liver tissue retinol or alpha-tocopherol concentrations or vitamin A intake were found, and no differences (P > 0.10) in lipogenic enzyme activity were detected among treatments. Taken together with previous and concurrent research, results of this experiment suggest that vitamin A supplementation at a concentration up to twice the NRC recommendation has little effect on performance, marbling, or lipogenic enzyme activity in adipose tissue samples in yearling feedlot steers, and that 2,205 IU of supplemental vitamin A/kg of DM (20,000 IU/steer daily) or less is adequate to meet the vitamin A requirements of finishing beef cattle.

Relationships between behavioral and physiological symptoms of preslaughter stress and LM Warner-Bratzler shear force (WBSF) were investigated using Bos taurus steers (n = 79) and heifers (n = 77). Measurements of heart rate, respiration rate, rectal temperature, and concentrations of serum cortisol and plasma epinephrine were used as indicators of stress associated with physical handling and chute restraint, whereas concentrations of cortisol, glucose, lactate, and creatine kinase in blood samples obtained at exsanguination were measured to reflect physiological reactions of animals to transportation stress. Increased plasma epinephrine concentration, indicative of acute handling stress, was associated with elevated heart rate (r = 0.42, P < 0.001) and rectal temperature (r = 0.34, P < 0.001) during restraint, increased plasma lactate (r = 0.22, P = 0.006) and serum creatine kinase (r = 0.28, P < 0.001) concentrations at slaughter, and greater LM WBSF (r = 0.22, P = 0.006). Plasma lactate concentration at slaughter, which reflected an adrenergic stress response to transportation, was associated with lesser final LM pH (r = -0.30, P < 0.001) and greater LM WBSF (r = 0.26, P = 0.002). Categorical analyses of chute and posttransportation behavior scores (calm vs. restless vs. nervous) showed that cattle exhibiting adverse behavioral reactions to handling and chute restraint had increased (P < 0.05) values for plasma epinephrine concentration, heart rate, and rectal temperature during chute restraint, elevated (P < 0.05) plasma lactate concentration at slaughter, and increased (P < 0.05) LM WBSF. In addition, cattle showing behavioral symptoms of stress after transportation had greater (P < 0.05) plasma glucose and lactate concentrations at slaughter and produced LM steaks that were 0.34 kg tougher (P < 0.05) when compared with calm cattle. No carcasses were identified as dark cutters, and LM pH did not differ (P > 0.05) among behavior categories. Grouping cattle according to differences in plasma lactate concentration categorized them according to mean differences in LM WBSF. Moreover, steaks from cattle with the greatest plasma lactate concentrations at slaughter (91st to 100th percentile) had a delayed response to aging that persisted until 14 d postmortem. Stress-induced differences in LM tenderness observed in this study were independent of differences in muscle pH.

Calf-fed heifers (n = 72) and steers (n = 72) were supplemented with 4 levels (0, 0.25, 0.50, and 0.75%) of dietary Mg as MgO during the final 14 d of finishing and were commingled 1 d before slaughter (inducing stress by mixing unfamiliar cattle) to examine the effects of sex class and Mg supplementation on stress responses and LM quality characteristics. Heifers and steers exhibited markedly different stress responses. Heifers were more excitable than steers during preslaughter handling events and exhibited a short-term physiological stress response that involved acute sympatho-adrenal activation and resulted in increased meat toughness, without a concomitant increase in muscle pH. Steers, on the other hand, exhibited greater physical activity, associated with agonistic behavior, during the mixing period and therefore produced carcasses with lesser (P = 0.008) LM glycogen concentrations and greater (P = 0.042) 48-h LM pH values, compared with heifers. Steers also produced tougher (P = 0.008) LM steaks than did heifers. Within the range of pH values observed in this study (5.3 to 6.1), positive, linear relationships between 48-h LM pH and mean LM shear force (P < 0.05) were observed in both heifers (r = 0.25) and steers (r = 0.37). Effects of pH on LM shear force (P < 0.05), which were most pronounced at 3 and 7 d postmortem, diminished during postmortem aging and were no longer evident (P > 0.05) once LM samples had been aged for 21 d. Results suggested that toughness of LM steaks from beef carcasses with final LM pH values greater than 5.65 could be problematic unless LM cuts are aged for approximately 18 d or longer. Supplementation with dietary Mg increased (P = 0.011) serum Mg concentration, but had no effect (P > 0.05) on any of the physiological stress indicators or LM quality characteristics measured in this study. There was no evidence to support the premise that Mg supplementation of cattle lessens the effects of preslaughter stress on beef quality characteristics.

A study was conducted in 2 phases to evaluate the effectiveness of 1) the VIAscan Beef Carcass System (BCSys; hot carcass system) and the CVS BeefCam (chilled carcass system), used independently or in combination, to predict Uruguayan beef carcass fabrication yields; and 2) the CVS BeefCam to segregate Uruguayan beef carcasses into groups that differ in the Warner-Bratzler shear force (WBSF) values of their LM steaks. The results from the meat yield phase of the present study indicated that the prediction of saleable meat yield percentages from Uruguayan beef carcasses by use of the BCSys or CVS BeefCam is similar to, or slightly better than, the use of USDA yield grade calculated to the nearest 0.1 and was much more effective than prediction based on Uruguay National Institute of Meat (INAC) grades. A further improvement in fabrication yield prediction could be obtained by use of a dual-component video image analysis (VIA) system. Whichever method of VIA prediction of fabrication yield is used, a single predicted value of fabrication yield for every carcass removes an impediment to the implementation of a value-based pricing system. Additionally, a VIA method of predicting carcass yield has the advantage over the current INAC classification system in that estimates would be produced by an instrument rather than by packing plant personnel, which would appeal to cattle producers. Results from the tenderness phase of the study indicated that the CVS BeefCam output variable for marbling was not (P > 0.05) able to segregate steer and heifer carcasses into groups that differed in WBSF values. In addition, the results of segregating steer and heifer carcasses according to muscle color output variables indicate that muscle maturity and skeletal maturity were useful for segregating carcasses according to differences in WBSF values of their steaks (P > 0.05). Use of VIA to predict beef carcass fabrication yields could improve accuracy and reduce subjectivity in comparison with use of current INAC grades. Use of VIA to sort carcasses according to muscle color would allow for the marketing of more consistent beef products with respect to tenderness. This would help facilitate the initiation of a value-based marketing system for the Uruguayan beef industry.

A study was conducted to determine if reflectance measurements made in the near-infrared region of the spectrum were additive to reflectance measurements made in the visible region of the spectrum for predicting Warner-Bratzler shear force (WBSF) values. Eighty seven strip loins were collected following fabrication over 3d at a commercial beef processing facility from heifer carcasses with Slight or Traces marbling scores. Spectroscopic measurements were made at approximately 50h postmortem using a Hunter-Lab UltraScan. Subsequently, all strip loins were aged for 14d, cooked to an internal temperature of 70°C, and sheared to obtain WBSF values. Reflectance measurements obtained in the near-infrared region of the spectrum were correlated with WBSF values, however, these measurements were not additive to the predictive ability of reflectance measurements (R(2) values did not differ) made in the visible portion of the spectrum when the use of broad-band wavelength filters were simulated. It was therefore determined, that both the visible and near-infrared spectra measure reflectance and that both methods are acceptable methods of tenderness prediction.

The National Beef Quality Audit-2005 assessed the current status of quality and consistency of US fed steers and heifers. Hide colors or breed type were black (56.3%), red (18.6%), Holstein (7.9%), gray (6.0%), yellow (4.9%), brown (3.0%), white (2.3%), and brindle (1.0%). Identification method and frequency were lot visual tags (63.2%), individual visual tags (38.7%), metal-clip tags (11.8%), electronic tags (3.5%), bar-coded tags (0.3%), by other means (2.5%), and without identification (9.7%). Brand frequencies were no (61.3%), 1 (35.1%), and 2 or more (3.6%), and brands were located on the butt (26.5%), side (7.4%), and shoulder (1.2%). There were 22.3% of cattle without horns, and the majority of those with horns (52.2%) were between 2.54 and 12.7 cm in length. Percentages of animals with mud or manure on specific body locations were none (25.8%), legs (61.4%), belly (55.9%), side (22.6%), and top-line (10.0%). Permanent incisor number and occurrence were zero (82.2%), 1 (5.2%), 2 (9.9%), 3 (0.4%), 4 (1.2%), 5 (0.1%), 6 (0.3%), 7 (0.0%), and 8 (0.7%). Most carcasses (64.8%) were not bruised, 25.8% had one bruise, and 9.4% had multiple bruises. Bruise location and incidence were round (10.6%), loin (32.6%), rib (19.5%), chuck (27.0%), and brisket, flank, and plate (10.3%). Condemnation item and incidence were liver (24.7%), lungs (11.5%), tripe (11.6%), heads (6.0%), tongues (9.7%), and carcasses (0.0%). Carcass evaluation revealed these traits and frequencies: steer (63.7%), heifer (36.2%), bullock (0.05%), and cow (0.04%) sex classes; dark-cutters (1.9%); A (97.1%), B (1.7%), and C or older (1.2%) overall maturities; and native (90.9%), dairy-type (8.3%), and Bos indicus (0.8%) estimated breed types. Mean USDA yield grade (YG) traits were USDA YG (2.9), HCW (359.9 kg), adjusted fat thickness (1.3 cm), LM area (86.4 cm(2)), and KPH (2.3%). The USDA YG were YG 1 (16.5%), YG 2 (36.3%), YG 3 (33.1%), YG 4 (11.8%), and YG 5 (2.3%). Mean USDA quality grade traits were USDA quality grade (Select(90)), marbling score (Small(32)), overall maturity (A(64)), lean maturity (A(57)), and skeletal maturity (A(68)). Marbling score distribution was Slightly Abundant or greater (2.7%), Moderate (4.3%), Modest (14.4%), Small (34.5%), Slight (41.2%), and Traces or less (2.9%). This information helps the beef industry measure progress and provides a benchmark for future educational and research activities.

Traceability programs can cover the whole of life, or parts of it, for individual animals or groups/lots of animals. Of 13 country or community traceability programs for cattle/beef, 11 are mandatory (4 encompass, or are scheduled to encompass, birth to retail; 7 cover birth to slaughter) while 2 are voluntary and encompass birth to slaughter. Of 10 country or community traceability programs for swine/pork, 2 are mandatory (1 covers birth to retail; 1 covers birth to slaughter) while 8 are voluntary. Of 6 country or community traceability programs for sheep/sheep-meat, 3 are mandatory (1 encompasses birth to retail; 2 encompass birth to slaughter) while 3 are voluntary. Mandatory birth to retail programs that include "post-slaughter individual animal identification (IAID) traceability" have been implemented for cattle/beef, swine/pork and sheep/sheep-meat by the European Union and for cattle/beef by Japan. Many of the voluntary as well as mandatory, birth to slaughter traceability programs for all three species are presumed (though that is not specified) to include "post-slaughter group/lot identification (GLID) traceability" - e.g., those qualifying products for shipment to the European Union. "Post-slaughter IAID traceability" can be accomplished in very-small, small, medium, large and very-large packing plants using single-carcass processing units, tagging and separation/segregation, and/or deoxyribonucleic acid (DNA) fingerprinting technology but all of these approaches are time-consuming and costly; and, to-date, in most countries, there has been no reason compelling enough to cause industry to adopt such protocols or technology.

Effects of the dark-cutting condition were examined on commercially slaughtered beef carcass sides that were classified into groups exhibiting 1/3, 1/2, and full degrees of the dark-cutting (DEGDC) condition, as evaluated by a USDA-Agricultural Marketing Service grader (n = 20 per group). Twenty-nine muscles of each carcass side were evaluated to determine the ultimate pH and color (L*, a*, and b*). Fourteen beef muscles (biceps femoris, deep pectoral, chuck complexus, gluteus medius, infraspinatus, latissimus dorsi, psoas major, longissimus thoracis, longissimus lumborum, semimembranosus, semitendinosus, triceps brachii long head, tensor fasciae latae, and vastus lateralis) were evaluated using Warner-Bratzler Shear force (WBSF) and a trained sensory panel. The muscle x DEGDC interaction was significant for ultimate pH, L*, a*, and b* values (P < 0.05). When ultimate pH values of individual muscles were compared with the same muscles evaluated in a previous study, the 1/3, 1/2, and full DEGDC had 7, 9, and 5 muscles, respectively, that fell within a computed 95% prediction limit of what would be considered as a normal pH but were more variable as measured by within-class CV. Color values (L*, a*, and b*) of the muscles from dark-cutting carcasses were numerically lower than those from the normal carcasses. A survey designed to determine the ideal color range of beef lean for retail meat merchandisers (n = 34) and food service chefs (n = 33) across the United States resulted in data analyzed using principal components analysis of L*, a*, and b* values for muscles dissected in the study to estimate the true values for dark-cutting carcasses. Muscles that were within an acceptable color value range for food service chefs had the potential to add between $42.29 to $26.44 and $14.71 to $8.11 per side when valued at Choice and Select prices, respectively. Muscles that were within an acceptable color value range had the potential to add between $30.39 to $16.74 and $10.37 to $5.03 per side for retail meat merchandisers when acceptable muscles were valued at Choice and Select prices, respectively. No muscle x DEGDC interactions were detected for WBSF and sensory panel scores (P > 0.05), but differences were detected among muscles (P < 0.05). Several muscles were considered salvageable from the dark-cutting carcasses that were evaluated, and no significant differences in sensory scores or WBSF between DEGDC classes suggested equal sensory expectations for muscles from dark-cutting carcasses.

Effects of ractopamine hydrochloride (RAC) supplementation and postmortem aging on palatability of beef from steers differing in biological type were evaluated using LM samples from British, Continental crossbred, and Brahman crossbred calf-fed steers (n = 98/type). Equal numbers of steers within each type were assigned to treatments of 0 or 200 mg.steer(-1).d(-1) of RAC fed during the final 28 d of the finishing period. Warner-Bratzler shear force (WBSF) was measured at 3, 7, 14, and 21 d postmortem, and trained sensory panel (TP) evaluation was conducted using LM samples aged for 14 d postmortem. A RAC x type interaction (P = 0.006) was detected for WBSF. Within each type, steers fed RAC produced steaks with greater (P < 0.05) WBSF values than steaks from control steers; however, the magnitude of the effect of RAC on WBSF was more pronounced among Brahman cross-breds (5.53 vs. 4.96 +/- 0.10 kg) than among Continental crossbred (4.16 vs. 3.96 +/- 0.10 kg) and British steers (4.10 vs. 3.75 +/- 0.10 kg). The effect of RAC on WBSF, though diminished slightly by aging (mean WBSF difference: 3 d = 0.49 kg; 21 d = 0.24 kg), was not completely mitigated by 21 d of postmortem storage (P(RAC x AGE) = 0.16). Steers fed RAC produced steaks that received lower (P < 0.05) TP ratings for tenderness (8.09 vs. 8.95 +/- 0.18) and juiciness (7.41 vs. 8.07 +/- 0.16 kg), along with slightly lower (P = 0.06) ratings for beef flavor (6.67 vs. 6.93 +/- 0.10 kg), compared with steaks from unsupplemented steers, regardless of biological type. Among the 3 biological types, Brahman crossbred cattle produced steaks with the greatest (P < 0.05) WBSF values at each aging period; WBSF values for steaks from British and Continental type steers did not differ (P > 0.05) at any aging time. Sensory panel ratings of tenderness, juiciness, and beef flavor were greatest (P < 0.05) for steaks from British steers, and least (P < 0.05) for steaks produced by Brahman-type steers. Results from this study suggest that RAC supplementation slightly decreases LM tenderness (WBSF and TP) of British, Continental crossbred, and Brahman cross-bred steers, and that the effect of RAC on WBSF may be more pronounced in steaks from Brahman crossbred cattle than among stenks from Continental type or British steers.

Effects of finishing implants on heifer carcass characteristics and LM Warner-Bratzler shear force (WBSF) were investigated using commercially fed Continental x British heifers (n = 500). Heifers were blocked by initial BW (block 1, BW > or = 340 kg; block 2, BW < 340 kg) and assigned randomly to 12 treatments that utilized 0, 1, or 2 finishing implants to deliver cumulative dosages of trenbolone acetate (TBA) and estradiol 17-beta (E2) ranging from 0 to 400 mg of TBA and 0 to 40 mg of E2 during the finishing period. Heifers in blocks 1 and 2 were slaughtered after 135 and 149 d on feed, respectively. At these endpoints, the treatment groups did not differ (P > 0.05) in adjusted fat thickness or predicted percentage of empty body fat. Compared with a nonimplanted control, implanting heifers once during finishing increased (P = 0.025) HCW by an average of 7.9 kg without affecting the mean marbling score, the percentage of carcasses grading Choice and Prime, or LM WBSF values. Compared with the use of 1 implant, the use of 2 finishing implants resulted in an additional increase (P = 0.008) in HCW of 6.0 kg. Reimplanting also increased (P < 0.001) LM area, reduced (P = 0.024) the percentage of KPH, and improved (P = 0.004) mean yield grade. However, reimplanted heifers produced a lower (P = 0.044) percentage of carcasses grading Choice and Prime and LM steaks with greater (P < 0.05) WBSF values at all postmortem aging times compared with heifers that were implanted once. Among heifers receiving 2 implants, mean 14-d LM WBSF increased linearly (P < 0.05) as the cumulative, combined dosage of E2 plus TBA increased. Heifers implanted with a combination of E2 plus TBA had larger (P = 0.046) LM areas, lower (P = 0.004) mean marbling scores, and greater LM WBSF values after 3 d (P = 0.001), 7 d (P = 0.001), 14 d (P = 0.003), and 21 d (P = 0.045) of postmortem aging than did heifers implanted with TBA alone. Heifers that received combination implants containing both E2 and TBA also produced fewer (P = 0.005) carcasses with marbling scores of modest or greater compared with heifers that received single-ingredient implants containing TBA alone. Implant treatment effects on LM WBSF gradually diminished as the length of the postmortem aging period increased. Postmortem aging periods of 14 to 28 d were effective for mitigating the detrimental effects of mild or moderately aggressive heifer implant programs on the predicted consumer acceptability of LM steaks.

Effects of ractopamine hydrochloride (RAC) supplementation on growth performance and carcass characteristics of feedlot steers differing in biological type were investigated using British, Continental crossbred, and Brahman crossbred calf-fed steers (n = 420). Steers of each type were weighed at reimplantation [British, mean BW = 375 kg (SD = 38 kg); Continental crossbred, mean BW = 379 kg (SD = 42 kg); Brahman crossbred, mean BW = 340 (SD = 32 kg)] and sorted into 7 BW blocks, each block consisting of 2 pens (10 steers per pen) per type. Pens within a block x type subclass were randomly assigned to RAC treatments (0 or 200 mg x steer(-1) x d(-1) fed during the final 28 d of the finishing period). The type x RAC interaction did not affect (P > 0.05) any of the traits evaluated in this study. Feeding RAC improved (P = 0.001) ADG (1.50 vs. 1.73 +/- 0.09 kg) and G:F (0.145 vs. 0.170 +/- 0.005), but did not affect (P = 0.48) DMI of steers. Dressing percentage, adjusted fat thickness, KPH percentage, and yield grade were not affected by RAC supplementation. Carcasses of steers fed RAC had heavier (P = 0.01) HCW (359 vs. 365 +/- 4.9 kg), larger (P = 0.046) LM areas (81.7 vs. 84.0 +/- 1.1 cm(2)), and tended (P = 0.07) to have lower mean marbling scores (487 vs. 477 +/- 5.2; Slight = 400, Small = 500) than did carcasses of control steers. Among the 3 biological types, Brahman crossbred steers had the lowest DMI and produced the lightest-weight carcasses that had the lowest mean marbling score (P < 0.05). Compared with Continental crossbred and Brahman crossbred steers, British steers produced carcasses with the greatest (P = 0.001) mean marbling scores. Continental crossbred steers had the heaviest BW and greatest dressing percentages and produced the heaviest carcasses with the largest LM areas (P < 0.05) compared with British and Brahman crossbred steers. In the present study, 28 d of supplementation with RAC at a dosage rate of 200 mg x steer(-1) x d(-1) elicited consistent responses in growth performance and carcass traits among 3 diverse biological cattle types.

Since the outbreak of bovine spongiform encephalopathy (BSE) in the United Kingdom in 1986 and its subsequent link to the human neurological disorder variant Creutzfeldt-Jakob disease (vCJD), presence of tissues from the central nervous system (CNS) in meat products has been considered a public health concern and, thus, has been banned from entering the human food chain in many countries. Despite this, potential can exist during harvesting to contaminate or cross-contaminate edible meat products with CNS tissue that is designated as a specified risk material (SRM) in many countries. Methods used to detect CNS tissue in meat products vary greatly in their sensitivity, specificity, cost, labor and expertise needed, ease of completion, and type of results given (qualitative vs quantitative) and, within these constraints, appropriate testing methods must be selected to monitor or verify that meat products system controls are effective in removing CNS tissue from the human food chain. The extent to which monitoring procedures are needed should be based on the public health risk of CNS tissue in meat products as determined by each sovereign nation and/or third-party international organizations such as the World Organization for Animal Health (OIE). Risk associated with consumption of CNS tissue should be estimated by sovereign nations by establishing prevalence of BSE within their borders. Using this information, science-based decisions may guide international policy and trade. Using available scientific information, appropriate testing methods for monitoring or verification, and prevalence information, nations can estimate and reduce, to the extent deemed necessary, the public health risk of vCJD.

Forty USDA Select and 40 upper two-thirds USDA Choice beef carcasses were used to determine the effects of postmortem aging on tenderness of 17 individual beef muscles. Biceps femoris-long head, complexus, gluteus medius, infraspinatus, longissimus dorsi, psoas major, rectus femoris, semimembranosus, semitendinosus, serratus ventralis, spinalis dorsi, supraspinatus, tensor fasciae latae, teres major, triceps brachii-long head, vastus lateralis, and vastus medialis muscles were removed from each carcass. Seven steaks (2.54-cm thick) were cut from every muscle, and each steak was assigned to one of the following postmortem aging periods: 2, 4, 6, 10, 14, 21, or 28 d postmortem. After completion of the designated aging period, steaks were removed from storage (2 degrees C, never frozen), cooked to a peak internal temperature of 71 degrees C, and evaluated using Warner-Bratzler shear force (WBSF). Analysis of WBSF revealed a 3-way interaction (P = 0.004) among individual muscle, USDA quality grade, and postmortem aging period. With the exception of the Select teres major, WBSF of all muscles (both quality grades) decreased with increasing time of postmortem storage. Nonlinear regression was used to characterize the extent (aging response) and rate of decrease in WBSF from 2 through 28 d postmortem for each muscle within each quality grade. In general, WBSF of upper two-thirds Choice muscles decreased more rapidly from 2 to 10 d postmortem than did corresponding Select muscles. Muscles that had greater aging responses generally had greater 2-d WBSF values. The upper two-thirds Choice psoas major, serratus ventralis, and vastus lateralis muscles required similar aging times to complete a majority of the aging response (< or =0.1 kg of aging response remaining) compared with analogous Select muscles. The upper two-thirds Choice complexus, gluteus medius, semitendinosus, triceps brachii-long head, and vastus medialis muscles required 4 to 6 d less time to complete a majority of the aging response than did comparable Select muscles. Aging times for Select biceps femoris-long head, infraspinatus, longissimus dorsi, rectus femoris, semimembranosus, spinalis dorsi, supraspinatus, and tensor fasciae latae muscles were > or =7 d longer than those for corresponding upper two-thirds Choice muscles. Results from this study suggest that muscle-to-muscle tenderness differences depend on quality grade and aging time and that postmortem aging should be managed with respect to individual muscle and USDA quality grade.

Equal numbers of British, Continental crossbred, and Brahman crossbred calf-fed steers (n = 420) were used to examine the effects of ractopamine supplementation and biological type on behavior during routine handling. Steers were blocked by BW within type and allocated to pens, resulting in 2 pens (10 cattle per pen) representing each block x type subclass. Pens within each block x type subclass then were randomly assigned to ractopamine supplementation treatments (0 or 200 mg.steer(-1).d(-1)), which were administered during the final 28 d of the finishing period. At the time final BW were obtained (28 d after treatment initiation), a single, trained observer, blinded with respect to treatment designations, recorded subjective scores to characterize behavior of each animal. Scores included entry force score (degree of force required to load the animal into the chute); entry speed score (walk, trot, run); chute behavior score (calm, restless shifting, moderate struggling); and exit speed score (walk, trot, run). Ractopamine supplementation had no effect on entry force score, chute behavior score, or exit speed score; however, cattle supplemented with ractopamine entered the chute more rapidly than did control cattle. Biological cattle type was a significant source of variation in entry force score and exit speed score. Continental crossbreds required greater (P < 0.05) force to enter the squeeze chute than did Brahman crossbred or British steers. In addition, Continental crossbred and Brahman crossbred steers left the processing chute with the greatest speed, whereas British steers exited the processing chute most slowly. Biological cattle type did not affect scores for entry speed or behavior during restraint in the chute. No adverse effects of ractopamine supplementation on cattle behavior were observed in this study.

Three methods are widely used in the United States to detect the presence of central nervous system (CNS) tissue in meat products: the fluorescent enzyme-linked immunosorbent assay (F-ELISA), developed in this laboratory, the colorimetric Ridascreen Risk Material 10/5 ELISA (R-ELISA), and the U.S. Department of Agriculture, Food Safety and Inspection Service immunohistochemical (IHC) procedure. These assays are based on the immunological detection of glial fibrillary acidic protein (GFAP), a neural antigen largely restricted to the CNS. The objective of the current study was to compare the sensitivity and repeatability of these tests for detecting the presence of neural tissue in meat. Ground beef spiked with 0.05 to 0.5% of bovine brain, spinal cord (SC), or dorsal root ganglia, as well as advanced meat recovery samples, were evaluated by each of the three GFAP detection procedures. Interassay coefficients of variation for the F-ELISA GFAP standards were 7 to 25%, and intra-assay variation due to sampling and extraction of spiked ground beef was 7 to 13% for SC and 8 to 14% for brain (n = 10). The F-ELISA was the most sensitive of the methods tested, capable of detecting 0.3 ng GFAP standard per well and the presence of 0.05% brain and SC in meat. The R-ELISA standards produced highly variable results (up to 36% variation) and, as a result, none of these standards were different from zero (n = 26). The R-ELISA resulted in high sample variation in SC-spiked ground beef samples (coefficients of variation were 23 to 50%) and did not detect the presence of brain contamination. After modification of the R-ELISA sampling and extraction methods, SC-spiked sample variation was reduced to 16 to 20%, and sensitivity was improved from 0.3 to 0.2% SC, although brain tissue was still not detected. The IHC analysis of CNS-adulterated ground beef had a sensitivity of 0.2% SC and 0.05% brain, with false-negative rates of 10 to 20% at and above the stated sensitivities. None of the methods examined detected dorsal root ganglia contamination. The F-ELISA detected the presence of CNS contamination in 20% of the advanced meat recovery samples, compared to 3.5 to 5% for the R-ELISA and 2% for IHC. This study suggests that the F-ELISA is much more sensitive and repeatable than either the R-ELISA or the IHC procedure method for the detection of CNS tissue in meat products.

Retail pork from eight US cities was obtained for quality and palatability evaluations. Boneless pork loin chops were classified into one of three quality categories - "high," "average," or "low" - with higher quality chops possessing more desirable color, marbling, juiciness, and shear force characteristics than lower quality chops. Loin chops that were enhanced (injected with solution to improve juiciness and/or tenderness) had higher (P<0.05) pH, less purge and cook loss, and higher palatability ratings compared to non-enhanced chops. Hams compared by their protein fat free (PFF) classifications showed that ham and water product received the highest (P<0.05) ratings for juiciness and tenderness, and ham with natural juices received the highest (P<0.05) texture, ham flavor intensity, and smoke flavor ratings. Bacon was compared by price/brand categories; however, the highest priced, national branded bacon (US$12.03/kg) was similar (P>0.05) for most quality and all palatability traits to the lowest priced, national branded bacon (US$6.47/kg) and the store branded bacon (US$8.30/kg) even though retail prices differed widely. Overall, there were tremendous ranges in values for these products indicating that retail pork is quite variable and that efforts to improve the quality and consistency of it must continue.

Traceability of a food consists of development of "an information trail that follows the food product's physical trail". Internationally, the US is lagging behind many countries in developing traceability systems for food in general and especially for livestock, poultry and their products. The US food industry is developing, implementing and maintaining traceability systems designed to improve food supply management, facilitate traceback for food safety and quality, and differentiate and market foods with subtle or undetectable quality attributes. Traceability, for livestock, poultry and meat, in its broadest context, can, could, or will eventually be used: (1) to ascertain origin and ownership, and to deter theft and misrepresentation, of animals and meat; (2) for surveillance, control and eradication of foreign animal diseases; (3) for biosecurity protection of the national livestock population; (4) for compliance with requirements of international customers; (5) for compliance with country-of-origin labeling requirements; (6) for improvement of supply-side management, distribution/delivery systems and inventory controls; (7) to facilitate value-based marketing; (8) to facilitate value-added marketing; (9) to isolate the source and extent of quality-control and food-safety problems; and (10) to minimize product recalls and make crisis management protocols more effective. Domestically and internationally, it has now become essential that producers, packers, processors, wholesalers, exporters and retailers assure that livestock, poultry and meat are identified, that record-keeping assures traceability through all or parts of the complete life-cycle, and that, in some cases, the source, the production-practices and/or the process of generating final products, can be verified. At issue, as the US develops traceback capabilities, will be the breadth, depth and precision of its specific traceability systems.

Experimental economic procedures were used to measure the effects of changes in marbling score and Warner-Bratzler shear force (WBSF) value on consumer purchasing behavior and willingness to pay for beef strip loin steaks (n = 541). Consumers were more likely to bid on a steak during the experimental auction if the steak had a high marbling score or low WBSF value. Averaging across all consumers in the study (n = 489), the predicted odds that consumers would submit a nonzero bid were favorable for steaks with a marbling score greater than Modest(50) or a WBSF value less than 3.9 kg. Bid prices for steaks were analyzed with respect to changes in steak marbling score, WBSF value, quality grade marketing category classification (Select, Low Choice, Premium Choice, and Prime), and WBSF marketing category classification (very tender, 5.40 kg). The percentage of bids that were zero was highest (P < 0.05) for Select steaks, intermediate (P < 0.05) for Low Choice steaks, and lower (P <0.05) for Premium Choice or Prime steaks. Steaks in the very tender category had the lowest (P < 0.05) percentage of zero bids, and steaks in the slightly tough and very tough categories had the highest (P < 0.05) percentage of zero bids submitted from "buyers" in the auction. Premium Choice and Prime steaks were valued higher (P < 0.05) than Select steaks by consumers. On average, Premium Choice steaks received a 0.89 dollars/kg premium, and Prime steaks received a 2.47 dollars/kg premium over the mean bid price for Select steaks. Predicted mean bid prices for steaks decreased by 1.02 dollars/kg for each 1 kg increase in WBSF value. On average, steaks in the very tender marketing category received a higher (P < 0.05) bid price than the bid price for steaks in the slightly tender, slightly tough, and very tough categories (+0.83 dollars/kg, +2.09 dollars/kg, and +2.55 dollars/kg, respectively). Mean bid prices for steaks from the slightly tough and very tough categories did not differ (P = 0.184). Compared with the mean bid price for steaks in the slightly tender category, steaks from the slightly tough and very tough categories were discounted (P < 0.05) by 1.26 dollars/kg and 1.72 dollars/kg, respectively. Results suggest that marbling score and WBSF influence both the probability that consumers will purchase and the price they are willing to pay for strip loin steaks.

This study was performed to validate previous equations and to develop and evaluate new regression equations for predicting lamb carcass fabrication yields using outputs from a lamb vision system-hot carcass component (LVS-HCC) and the lamb vision system-chilled carcass LM imaging component (LVS-CCC). Lamb carcasses (n = 149) were selected after slaughter, imaged hot using the LVS-HCC, and chilled for 24 to 48 h at -3 to 1 degrees C. Chilled carcasses yield grades (YG) were assigned on-line by USDA graders and by expert USDA grading supervisors with unlimited time and access to the carcasses. Before fabrication, carcasses were ribbed between the 12th and 13th ribs and imaged using the LVS-CCC. Carcasses were fabricated into bone-in subprimal/primal cuts. Yields calculated included 1) saleable meat yield (SMY); 2) subprimal yield (SPY); and 3) fat yield (FY). On-line (whole-number) USDA YG accounted for 59, 58, and 64%; expert (whole-number) USDA YG explained 59, 59, and 65%; and expert (nearest-tenth) USDA YG accounted for 60, 60, and 67% of the observed variation in SMY, SPY, and FY, respectively. The best prediction equation developed in this trial using LVS-HCC output and hot carcass weight as independent variables explained 68, 62, and 74% of the variation in SMY, SPY, and FY, respectively. Addition of output from LVS-CCC improved predictive accuracy of the equations; the combined output equations explained 72 and 66% of the variability in SMY and SPY, respectively. Accuracy and repeatability of measurement of LM area made with the LVS-CCC also was assessed, and results suggested that use of LVS-CCC provided reasonably accurate (R2 = 0.59) and highly repeatable (repeatability = 0.98) measurements of LM area. Compared with USDA YG, use of the dual-component lamb vision system to predict cut yields of lamb carcasses improved accuracy and precision, suggesting that this system could have an application as an objective means for pricing carcasses in a value-based marketing system.

Logistic regression was used to quantify and characterize the effects of changes in marbling score, Warner-Bratzler shear force (WBSF), and consumer panel sensory ratings for tenderness, juiciness, or flavor on the probability of overall consumer acceptance of strip loin steaks from beef carcasses (n = 550). Consumers (n = 489) evaluated steaks for tenderness, juiciness, and flavor using nine-point hedonic scales (1 = like extremely and 9 = dislike extremely) and for overall steak acceptance (satisfied or not satisfied). Predicted acceptance of steaks by consumers was high (> 85%) when the mean consumer sensory rating for tenderness,juiciness, or flavor for a steak was 3 or lower on the hedonic scale. Conversely, predicted consumer acceptance of steaks was low (< or = 10%) when the mean consumer rating for tenderness, juiciness, or flavor for a steak was 5 or higher on the hedonic scale. As mean consumer sensory ratings for tenderness, juiciness, or flavor decreased from 3 to 5, the probability of acceptance of steaks by consumers diminished rapidly in a linear fashion. These results suggest that small changes in consumer sensory ratings for these sensory traits have dramatic effects on the probability of acceptance of steaks by consumers. Marbling score displayed a weak (adjusted R2 = 0.053), yet significant (P < 0.01), relationship to acceptance of steaks by consumers, and the shape of the predicted probability curve for steak acceptance was approximately linear over the entire range of marbling scores (Traces67 to Slightly Abundant97), suggesting that the likelihood of consumer acceptance of steaks increases approximately 10% for each full marbling score increase between Slight to Slightly Abundant. The predicted probability curve for consumer acceptance of steaks was sigmoidal for the WBSF model, with a steep decline in predicted probability of acceptance as WBSF values increased from 3.0 to 5.5 kg. Changes in WBSF within the high (> 5.5 kg) or low (< 3.0 kg) portions of the range of WBSF values had little effect on the probability of consumer acceptance of steaks.

In two phases, this study assessed the ability of two video image analysis (VIA) instruments, VIASCAN and Computer Vision System (CVS), to augment assignment of yield grades (YG) to beef carcasses to 0.1 of a YG at commercial packing plant speeds and to test cutout prediction accuracy of a YG augmentation system that used a prototype augmentation touchpanel grading display (designed to operate commercially in real-time). In Phase I, beef carcasses (n = 505) were circulated twice at commercial chain speeds (340 carcasses per hour) by 12 on-line USDA graders. During the first pass, on-line graders assigned a whole-number YG and a quality grade (QG) to carcasses as they would normally. During the second pass, on-line graders assigned only adjusted preliminary yield grades (APYG) and QG to carcasses, whereas the two VIA instruments measured the longissimus muscle area (LMA) of each carcass. Kidney, pelvic, and heart fat (KPH) was removed and weighed to allow computation of actual KPH percentage. Those traits were compared to the expert YG and expert YG factors. On-line USDA graders' APYG were closely related (r = 0.83) to expert APYG. Instrument-measured LMA were closely related (r = 0.88 and 0.94; mean absolute error = 0.3 and 0.2 YG units, for VIASCAN and CVS, respectively) to expert LMA. When YG were augmented using instrument-measured LMA and computed either including or neglecting actual KPH percentage, YG were closely related (r = 0.93 and 0.92, mean absolute error = 0.32 and 0.40 YG units, respectively, using VIASCAN-measured LMA; r = 0.95 and 0.94, mean absolute error = 0.24 and 0.34 YG units, respectively, using CVS-measured LMA) to expert YG. In Phase II, augmented YG were assigned (0.1 of a YG) to beef carcasses (n = 290) at commercial chain speeds using VIASCAN and CVS to determine LMA, whereas APYG and QG were determined by online graders via a touch-panel display. On-line grader YG (whole-number), expert grader YG (to the nearest 0.1 of a YG), and VIASCAN- and CVS-augmented YG (to the nearest 0.1 of a YG) accounted for 55, 71, 60, and 63% of the variation in fabricated yields of closely trimmed subprimals, respectively, suggesting that VIA systems can operate at current plant speeds and effectively augment official USDA application of YG to beef carcasses.

Concern has been raised about green discoloration of injection-site lesions in chuck muscles in modified-atmosphere packages. Objectives were: 1) to recreate green lesions, 2) to compare the severity of discoloration of injection-site lesions in chucks from carcasses of control or vitamin E-supplemented steers, and 3) to identify pigment(s) responsible for discoloration via in vitro color reactions. In Exp. 1, 23 steers (BW = 415 kg; 37 d before harvest) were injected with one of 12 pharmaceuticals, following label directions for route and dose, with the exception of a 5-mL maximum dose, to identify a product that could result in discoloration. Two vaccines (Products A and B) resulted in greening. In Exp. 2, 50 steers were injected (i.m.) with Product A and assigned to the control or vitamin E (1,000 IU/steer daily for 60 d) group. After retail display, 80 and 72% of steaks from the control and treatment groups, respectively, were discolored. Although vitamin E did not reduce (P = 0.53) greening, there was a trend (P = 0.10) toward delay discoloration of lesions from the treatment group. In Phase I of Exp. 3, pigments extracted from green lesions obtained from Exp. 2 were compared with solutions, exposed to a high partial pressure of oxygen (ppO), of myoglobin (Mb), copper sulfate, hydrogen peroxide (H2O2), vaccine, and aluminum hydroxide either alone or in combination. In Phase II of Exp. 3, solutions of two or more of Mb, Cu, sodium sulfide, sodium sulfite, sodium sulfate (Na2SO4), and H2O2 were made at pH 7.2 or 5.5 and exposed to low or high ppO. Normal muscle tissue displayed a 3.2 and 56.7% decrease in absorbance/microg of protein as wavelength changed from 654 to 656 nm and 656 to 658 nm, respectively. Pigments from control and treatment group green tissue displayed a 164.5 and 621.3% increase, respectively, in absorbance/microg of protein as wavelength changed from 654 to 656 nm. As wavelength changed from 656 to 658 nm, the absorbance/microg of protein for control and treatment group lesions decreased by 75 and 109%, respectively. The Mb+Cu+Na2SO4 solution, at pH 5.5 and high ppO, exhibited similar absorbance trends as green lesions indicating that greening may result from a Mb, Cu, and Na2SO4 interaction. Results indicated that greening varies with pharmaceuticals and oxidation of tissue cannot be controlled with vitamin E supplementation. Research on the causative agents of green discoloration, with an emphasis on compounds containing sulfate or Cu, is needed.

This study was conducted to determine the accuracy and repeatability of beef carcass longissimus muscle area (LMA) measurements obtained by three different methods. Longissimus muscle area for beef carcass sides (n = 100) randomly selected in a commercial packing plant was determined: 1) independently by three USDA grading supervisor "experts" using the grid method to obtain triplicate measurements of the same longissimus muscle (LM); 2) by three different Colorado State University personnel tracing the LMA on acetate paper and subsequently measuring the area via a polar planimeter three different times (total of 3 x 3 = 9 observations/LM); and 3) by use of two identical video image analysis (VIA) instruments making triplicate measurements for each LM using three different procedures. Video image analysis Procedure 1 required that LMA be measured by placing the camera head unit over the LM and collecting three sequential images without moving the camera head unit while carcasses were in a stationary position; Procedure 2 required measurement of LMA by placing the camera head unit over the LM and collecting three images, but removing and repositioning the camera head unit between collection of each image while carcasses were in a stationary position; and Procedure 3 required that LMA be measured by placing the camera head unit over the LM and obtaining an image while carcasses were in continuous motion (chain speed of 360 carcasses/ h) during three different circulations past the grading stand. Overall, VIA-derived LMA measurements were highly accurate for all three procedures compared with expert-gridded (R2 = 0.92, 0.90, and 0.84 for Procedures 1, 2, and 3, respectively) and acetate/planimeter-traced (R2 = 0.94, 0.93, and 0.86 for Procedures 1, 2, and 3, respectively) LMA measurements. Instrument LMA repeatability also was comparable to expert-gridded and acetate/planimeter-traced LMA repeatability, as the means of the absolute differences between individual measurements and the average of those same measurements per LM were 1.29, 1.35, 0.52, 0.84, and 1.87 cm2 for expert-gridded, acetate/planimeter-traced, and VIA Procedures 1, 2, and 3, respectively. Therefore, VIA instrumentation can be used to assess beef carcass LMA in both a stationary and operational scenario with high levels of accuracy and repeatability.

An objective method for predicting red meat yield in lamb carcasses is needed to accurately assess true carcass value. This study was performed to evaluate the ability of the lamb vision system (LVS; Research Management Systems USA, Fort Collins, CO) to predict fabrication yields of lamb carcasses. Lamb carcasses (n = 246) were evaluated using LVS and hot carcass weight (HCW), as well as by USDA expert and on-line graders, before fabrication of carcass sides to either bone-in or boneless cuts. On-line whole number, expert whole-number, and expert nearest-tenth USDA yield grades and LVS + HCW estimates accounted for 53, 52, 58, and 60%, respectively, of the observed variability in boneless, saleable meat yields, and accounted for 56, 57, 62, and 62%, respectively, of the variation in bone-in, saleable meat yields. The LVS + HCW system predicted 77, 65, 70, and 87% of the variation in weights of boneless shoulders, racks, loins, and legs, respectively, and 85, 72, 75, and 86% of the variation in weights of bone-in shoulders, racks, loins, and legs, respectively. Addition of longissimus muscle area (REA), adjusted fat thickness (AFT), or both REA and AFT to LVS + HCW models resulted in improved prediction of boneless saleable meat yields by 5, 3, and 5 percentage points, respectively. Bone-in, saleable meat yield estimations were improved in predictive accuracy by 7.7, 6.6, and 10.1 percentage points, and in precision, when REA alone, AFT alone, or both REA and AFT, respectively, were added to the LVS + HCW output models. Use of LVS + HCW to predict boneless red meat yields of lamb carcasses was more accurate than use of current on-line whole-number, expert whole-number, or expert nearest-tenth USDA yield grades. Thus, LVS + HCW output, when used alone or in combination with AFT and/or REA, improved on-line estimation of boneless cut yields from lamb carcasses. The ability of LVS + HCW to predict yields of wholesale cuts suggests that LVS could be used as an objective means for pricing carcasses in a value-based marketing system.

Effects of repetitive use of anabolic implants on beef carcass quality, tenderness, and consumer ratings for palatability were investigated using crossbred steer calves (n = 550). Steers from five ranches were randomly allocated to one of 10 different lifetime implant strategies or to a nonimplanted control group. Cattle were implanted at some or all of five phases of production (branding, weaning, backgrounding, feedlot entry, or reimplant time). Carcasses from the control group had higher (P < 0.05) marbling scores than carcasses from steers in all other treatment groups. Implanting steers at branding, weaning, or backgrounding vs. not implanting steers at these production stages did not affect (P > 0.05) marbling scores. Steers implanted twice during their lifetime produced carcasses with higher (P < 0.05) marbling scores than did steers receiving a total of four or five implants. Steaks obtained from carcasses in the control group had lower (P < 0.05) shear force values and were rated by consumers as more desirable (P < 0.05) for tenderness like/dislike than steaks obtained from carcasses in all other treatment groups. Implanting steers at branding or weaning production stages did not affect (P > 0.05) steak shear force values, consumer ratings for like/dislike of steak tenderness, or percentage of consumers rating overall eating quality of steaks as satisfactory. Implanting steers at backgrounding vs. not implanting steers at this production stage increased (P < 0.05) steak shear force values, but did not influence (P > 0.05) consumer ratings for like/dislike of steak tenderness or percentage of consumers rating overall eating quality of steaks as satisfactory. Steaks from nonimplanted steers were rated as more desirable (P < 0.05) for overall eating quality than steaks from steers implanted two, three, four, or five times. Use of implants increased (P < 0.05) average daily gain by 11.8 to 20.5% from weaning to harvest compared with nonimplanted controls. Implant strategies increased (P < 0.05) hot carcass weight of steers by 8.9 to 13.8% compared with the control group. Use of implants also increased (P < 0.05) longissimus muscle area and decreased (P < 0.05) estimated percentages of kidney/pelvic/heart fat, but did not affect (P > 0.05) dressing percentage or adjusted fat thickness. Our findings suggest that beef quality, palatability, and production characteristics are influenced by lifetime implant protocols.

This study was conducted to determine the effectiveness of the SmartMV prototype BeefCam Video Imaging System (prototype BeefCam) for classifying beef carcasses into palatability ("certified" or "not certified" as palatable) groups. Carcasses (n = 769) were selected from four beef-packing plants to represent three USDA quality grade groups (Top Choice, TC; Low Choice, LC; and Select, SE). Following chilling, a prototype BeefCam image of the longissimus muscle was obtained for each carcass. Strip loins were collected from the left side of each carcass and aged for 10 d; Warner-Bratzler shear force (WBSF; n = 769) values and consumer panel ratings (hedonic, end-anchored, 9-point ratings for overall like/dislike; n = 500 carcasses) were obtained for cooked steaks. Using information from the images, two regression models were developed to predict the first principal component of WBSF and consumer panel ratings for sorting carcasses based on expected eating quality. Model I used only prototype BeefCam output, whereas Model II used prototype BeefCam output and a coded value for quality grade group. For both models, carcasses with a predicted value of less than 0.0 were certified as producing palatable beef Additional carcasses (n = 292) were evaluated at a fifth and separate packing plant by prototype BeefCam to validate Models I and II. A strip loin was collected from each carcass and WBSF was measured after 14 d of aging. The percentages of validation carcasses that generated tough (WBSF > or = 4.5 kg) steaks were 6.5,5.8,10.7, and 7.9% for, TC, LC, SE, and all carcasses, respectively. Use of Model I certified 51.9, 47.6, 43.8, and 47.3% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model I, 0.0,0.0, 4.1, and 1.4% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. Use of Model II certified 59.7, 47.6, 25.0, and 42.1% of TC, LC, SE, and all carcasses, respectively. Of the carcasses certified by use of Model II, 2.2, 0.0, 3.6, and 1.6% of TC, LC, SE, and all carcasses, respectively, generated tough steaks. For both models, the frequency of carcasses that produced tough steaks in the certified group was lower (P < 0.05) for all validation carcasses sampled compared with that of the original carcass population. Based on the decrease in the frequency of carcasses that produced tough steaks, further development of a commercial BeefCam system is warranted.