Search

The discrete and charge-separated nature of matter - electrons and nuclei - results in local electrostatic fields that are ubiquitous in nanoscale structures and are determined by their shape, material, and environment. Such fields are relevant in catalysis, nanoelectronics and quantum nanoscience, and their control will become even more important as the devices in question reach few-nanometres dimensions. Surface-averaging techniques provide only limited experimental access to these potentials at and around individual nanostructures. Here, we use scanning quantum dot microscopy to investigate how electric potentials evolve as nanostructures are built up atom by atom. We image the potential over adatoms, chains, and clusters of Ag and Au atoms on Ag(111) and quantify their surface dipole moments. By focusing on the total charge density, these data establish a new benchmark for ab initio calculations. Indeed, our density functional theory calculations not only show an impressive agreement with experiment, but also allow a deeper analysis of the mechanisms behind the dipole formation, their dependence on fundamental atomic properties and on the atomic configuration of the nanostructures. This allows us to formulate an intuitive picture of the basic mechanisms behind dipole formation, which enables better design choices for future nanoscale systems such as single atom catalysts., Comment: 11 pages, 9 figures

Superconducting electrodes are an integral part of hybrid Josephson junctions used in many applications including quantum technologies. We report on the fabrication and characterization of superconducting hybrid Au/YBa2Cu3O7-x (YBCO) electrodes on vicinal substrates. In these structures, superconducting CuO2-planes face the gold film, resulting in a higher value and smaller variation of the induced energy gap compared to the conventional Au/YBCO electrodes based on films with the c-axis normal to the substrate surface. Using scanning tunneling microscopy, we observe an energy gap of about 10-17 meV at the surface of the 15- nm-thick gold layer deposited in situ atop the YBCO film. To study the origin of this gap, we fabricate nanoconstrictions from the Au/YBCO heterostructure and measure their electrical transport characteristics. The conductance of the nanoconstrictions shows a series of dips due to multiple Andreev reflections in YBCO and gold providing clear evidence of the superconducting nature of the gap in gold. We consider the Au/YBCO electrodes to be a versatile platform for hybrid Josephson devices with a high operating temperature.

Van der Waals heterostructures are an excellent platform for studying intriguing interface phenomena, such as moir\'e and proximity effects. Surface science techniques like scanning tunneling microscopy (STM) have proven a powerful tool to study such heterostructures but have so far been hampered because of their high sensitivity to surface contamination. Here, we report a dry polymer-based assembly technique to fabricate van der Waals heterostructures with atomically clean surfaces. The key features of our suspended dry pick-up and flip-over technique are 1) the heterostructure surface never comes into contact with polymers, 2) it is entirely solvent-free, 3) it is entirely performed in a glovebox, and 4) it only requires temperatures below 130$^{\circ}$. By performing ambient atomic force microscopy and atomically-resolved scanning tunneling microscopy on example heterostructures, we demonstrate that we can fabricate air-sensitive heterostructures with ultra-clean interfaces and surfaces. Due to the lack of polymer melting, the technique is further compatible with heterostructure assembly under ultra-high vacuum conditions, which promises ultimate heterostructure quality.

One-dimensional (1D) topological superconductivity is a state of matter that is not found in nature. However, it can be realised, for example, by inducing superconductivity into the quantum spin Hall edge state of a two-dimensional topological insulator. Because topological superconductors are proposed to host Majorana zero modes, they have been suggested as a platform for topological quantum computing. Yet, conclusive proof of 1D topological superconductivity has remained elusive. Here, we employ low-temperature scanning tunnelling microscopy to show 1D topological superconductivity in a van der Waals heterostructure by directly probing its superconducting properties, instead of relying on the observation of Majorana zero modes at its boundary. We realise this by placing the two-dimensional topological insulator monolayer WTe$_2$ on the superconductor NbSe$_2$. We find that the superconducting topological edge state is robust against magnetic fields, a hallmark of its triplet pairing. Its topological protection is underpinned by a lateral self-proximity effect, which is resilient against disorder in the monolayer edge. By creating this exotic state in a van der Waals heterostructure, we provide an adaptable platform for the future realization of Majorana bound states. Finally, our results more generally demonstrate the power of Abrikosov vortices as effective experimental probes for superconductivity in nanostructures., Comment: 13 pages, 4 figures

Artificial nanostructures, fabricated by placing building blocks such as atoms or molecules in well-defined positions, are a powerful platform in which quantum effects can be studied and exploited on the atomic scale. Here, we report a strategy to significantly reduce the electron-electron coupling between a large planar aromatic molecule and the underlying metallic substrate. To this end, we use the manipulation capabilities of a scanning tunneling microscope (STM) and lift the molecule into a metastable upright geometry on a pedestal of two metal atoms. Measurements at millikelvin temperatures and magnetic fields reveal that the bottom-up assembled standing metal-molecule nanostructure has an $S = \frac{1}{2}$ spin which is screened by the substrate electrons, resulting in a Kondo temperature of only $291 \pm 13$ mK. We extract the Land\'e $g$-factor of the molecule and the exchange coupling $J\rho$ to the substrate by modeling the differential conductance spectra using a third-order perturbation theory in the weak coupling and high-field regimes. Furthermore, we show that the interaction between the STM tip and the molecule can tune the exchange coupling to the substrate, which suggests that the bond between the standing metal-molecule nanostructure and the surface is mechanically soft.

We employ a scanning tunnelling microscope (STM) cooled to millikelvin temperatures by an adiabatic demagnetization refrigerator (ADR) to perform scanning tunnelling spectroscopy (STS) on an atomically clean surface of Al(100) in a superconducting state using normal-metal and superconducting STM tips. Varying the ADR temperatures between 30 mK and 1.2 K, we show that the temperature of the STM junction $T$ is decoupled from the temperature of the surrounding environment $T_{\mathrm{env}}$. Simulating the STS data with the $P(E)$ theory, we determine that $T_{\mathrm{env}} \approx 1.5$ K, while the fitting of the superconducting gap spectrum yields the lowest $T=77$ mK., Comment: 12 pages, 10 figures

In the past decade, photoemission orbital tomography (POT) has evolved into a powerful tool to investigate the electronic structure of organic molecules adsorbed on (metallic) surfaces. By measuring the angular distribution of photoelectrons as a function of binding energy and making use of the momentum-space signature of molecular orbitals, POT leads to an orbital-resolved picture of the electronic density of states at the organic/metal interface. In this combined experimental and theoretical work, we apply POT to the prototypical organic $\pi$-conjugated molecule bisanthene (C$_{28}$H$_{14}$) which forms a highly oriented monolayer on a Cu(110) surface. Experimentally, we identify an unprecedented number of 13 $\pi$ and 12 $\sigma$ orbitals of bisanthene and measure their respective binding energies and spectral lineshapes at the bisanthene/Cu(110) interface. Theoretically, we perform density functional calculations for this interface employing four widely used exchange-correlation functionals from the families of the generalized gradient approximations as well as global and range-separated hybrid functionals. By analyzing the electronic structure in terms of orbital-projected density of states, we arrive at a detailed orbital-by-orbital assessment of theory vs. experiment. This allows us to benchmark the performance of the investigated functionals with regards to their capability of accounting for the orbital energy alignment at organic/metal interfaces.

Strongly interacting electrons in layered materials give rise to a plethora of emergent phenomena, such as unconventional superconductivity. heavy fermions, and spin textures with non-trivial topology. Similar effects can also be observed in bulk materials, but the advantage of two dimensional (2D) systems is the combination of local accessibility by microscopic techniques and tuneability. In stacks of 2D materials, for example, the twist angle can be employed to tune their properties. However, while material choice and twist angle are global parameters, the full complexity and potential of such correlated 2D electronic lattices will only reveal itself when tuning their parameters becomes possible on the level of individual lattice sites. Here, we discover a lattice of strongly correlated electrons in a perfectly ordered 2D supramolecular network by driving this system through a cascade of quantum phase transitions using a movable atomically sharp electrostatic gate. As the gate field is increased, the molecular building blocks change from a Kondo-screened to a paramagnetic phase one-by-one, enabling us to reconstruct their complex interactions in detail. We anticipate that the supramolecular nature of the system will in future allow to engineer quantum correlations in arbitrary patterned structures.

Quantum spin Hall (QSH) insulators have unique electronic properties, comprising a band gap in their two-dimensional interior and one-dimensional spin-polarized edge states in which current flows ballistically. In scanning tunneling microscopy (STM), the edge states manifest themselves as a localized density of states. However, there is a significant research gap between the observation of edge states in nanoscale spectroscopy, and the detection of ballistic transport in edge channels which typically relies on transport experiments with microscale lithographic contacts. Here, we study few-layer films of the three-dimensional topological insulator (Bi$_{x}$Sb$_{1-x})_2$Te$_3$, for which a topological transition to a two-dimensional topological QSH insulator phase has been proposed. Indeed, an edge state in the local density of states is observed within the band gap. Yet, in nanoscale transport experiments with a four-tip STM, 2 and 3 quintuple layer films do not exhibit a ballistic conductance in the edge channels. This demonstrates that the detection of edge states in spectroscopy can be misleading with regard to the identification of a QSH phase. In contrast, nanoscale multi-tip transport experiments are a robust method for effectively pinpointing ballistic edge channels, as opposed to trivial edge states, in quantum materials.

In the field of van der Waals heterostructures, the twist angle between stacked two-dimensional (2D) layers has been identified to be of utmost importance for the properties of the heterostructures. In this context, we previously reported the growth of a single layer of unconventionally oriented epitaxial graphene that forms in a surfactant atmosphere [F. C. Bocquet, et al., Phys. Rev. Lett. 125, 106102 (2020)]. The resulting G-R0$^\circ$ layer is aligned with the SiC lattice, and hence represents an important milestone towards high quality twisted bilayer graphene (tBLG), a frequently investigated model system in this field. Here, we focus on the surface structures obtained in the same surfactant atmosphere, but at lower preparation temperatures at which a boron nitride template layer forms on SiC(0001). In a comprehensive study based on complementary experimental and theoretical techniques, we find -- in contrast to the literature -- that this template layer is a hexagonal B$_x$N$_y$ layer, but not high-quality hBN. It is aligned with the SiC lattice and gradually replaced by low-quality graphene in the 0$^\circ$ orientation of the B$_x$N$_y$ template layer upon annealing.

Using the normal incidence x-ray standing wave technique as well as low energy electron microscopy we have investigated the structure of quasi-freestanding monolayer graphene (QFMLG) obtained by intercalation of antimony under the $\left(6\sqrt{3}\times6\sqrt{3}\right)R30^\circ$ reconstructed graphitized 6H-SiC(0001) surface, also known as zeroth-layer graphene. We found that Sb intercalation decouples the QFMLG well from the substrate. The distance from the QFMLG to the Sb layer almost equals the expected van der Waals bonding distance of C and Sb. The Sb intercalation layer itself is mono-atomic, flat, and located much closer to the substrate, at almost the distance of a covalent Sb-Si bond length. All data is consistent with Sb located on top of the uppermost Si atoms of the SiC bulk.

Tracing the modifications of molecules in surface chemical reactions benefits from the possibility to image their orbitals. While delocalized frontier orbitals with {\pi}-character are imaged routinely with photoemission orbital tomography, they are not always sensitive to local chemical modifications, particularly the making and breaking of bonds at the molecular periphery. For such bonds, {\sigma}-orbitals would be far more revealing. Here, we show that these orbitals can indeed be imaged in a remarkably broad energy range, and that the plane wave approximation, an important ingredient of photoemission orbital tomography, is also well fulfilled for these orbitals. This makes photoemission orbital tomography a unique tool for the detailed analysis of surface chemical reactions. We demonstrate this by identifying the reaction product of a dehalogenation and cyclodehydrogenation reaction.

We combine low-temperature scanning tunneling spectroscopy, CO functionalized tips and algorithmic data analysis to investigate the electronic structure of the molecular cycloarene C108 (graphene nanoring) adsorbed on a Au(111) surface. We demonstrate that CO functionalized tips enhance the visibility of molecular resonances, both in differential conductance spectra and in real-space topographic images without introducing spurious artifacts. Comparing our experimental data with ab-initio density functional theory reveals a remarkably precise agreement of the molecular orbitals and enables us to disentangle close-lying molecular states only separated by 50 meV at an energy of 2 eV below the Fermi level. We propose this combination of techniques as a promising new route for a precise characterization of complex molecules and other physical entities which have electronic resonances in the tip-sample junction., Comment: 20 pages, 7 figures

Three-dimensional (3D) topological insulators (TIs) are known to carry 2D Dirac-like topological surface states in which spin-momentum locking prohibits backscattering. When thinned down to a few nanometers, the hybridization between the topological surface states at the top and bottom surfaces results in a topological quantum phase transition, which can lead to the emergence of a quantum spin Hall phase. Here, we study the thickness-dependent transport properties across the quantum phase transition on the example of (Bi$_{0.16}$Sb$_{0.84}$)$_2$Te$_3$ films, with a four-tip scanning tunnelling microscope. Our findings reveal an exponential drop of the conductivity below the critical thickness. The steepness of this drop indicates the presence of spin-conserving backscattering between the top and bottom surface states, effectively lifting the spin-momentum locking and resulting in the opening of a gap at the Dirac point. Our experiments provide crucial steps towards the detection of quantum spin Hall states in transport measurements.

The discovery of topological superconductivity in doped Bi$_2$Se$_3$ made this class of materials highly important for the field of condensed matter physics. However, the structural origin of the superconducting state remained elusive, despite being investigated intensively in recent years. We use scanning tunneling microscopy and the normal incidence x-ray standing wave (NIXSW) technique in order to determine the vertical position of the dopants -- one of the key parameters for understanding topological superconductivity in this material -- for the case of Sr$_{x}$Bi$_2$Se$_3$. In a novel approach we analyze the NIXSW data in consideration of the inelastic mean free path of the photoemitted electrons, which allows us to distinguish between symmetry equivalent sites. We find that Sr-atoms are not situated inside the van der Waals gap between the Bi$_2$Se$_3$ quintuple layers but rather in the quintuple layer close to the outer Se planes., Comment: 13 pages, 9 figures, 2 tables

We present the design and performance of an ultra-high vacuum (UHV) scanning tunneling microscope (STM) that uses adiabatic demagnetization of electron magnetic moments for controlling its operating temperature in the range between 30 mK and 1 K with the accuracy of up to 7 $\mu$K. The time available for STM experiments at 50 mK is longer than 20 h, at 100 mK about 40 h. The single-shot adiabatic demagnetization refrigerator (ADR) can be regenerated automatically within 7 hours while keeping the STM temperature below 5 K. The whole setup is located in a vibrationally isolated, electromagnetically shielded laboratory with no mechanical pumping lines penetrating through its isolation walls. The 1K pot of the ADR cryostat can be operated silently for more than 20 days in a single-shot mode using a custom-built high-capacity cryopump. A high degree of vibrational decoupling together with the use of a specially-designed minimalistic STM head provides an outstanding mechanical stability, demonstrated by the tunneling current noise, STM imaging, and scanning tunneling spectroscopy measurements all performed on atomically clean Al(100) surface., Comment: 12 pages, 15 figures

Scanning quantum dot microscopy is a recently developed high-resolution microscopy technique that is based on atomic force microscopy and is capable of imaging the electrostatic potential of nanostructures like molecules or single atoms. Recently, it could be shown that it not only yields qualitatively but also quantitatively cutting edge images even on an atomic level. In this paper we present how control is a key enabling element to this. The developed control approach consists of a two-degree-of-freedom control framework that comprises a feedforward and a feedback part. For the latter we design two tailored feedback controllers. The feedforward part generates a reference for the current scanned line based on the previously scanned one. We discuss in detail various aspects of the presented control approach and its implications for scanning quantum dot microscopy. We evaluate the influence of the feedforward part and compare the two proposed feedback controllers. The proposed control algorithms speed up scanning quantum dot microscopy by more than a magnitude and enable to scan large sample areas., Comment: 13 pages, 23 figures, 4 tables

For organic molecules adsorbed as well-oriented ultra-thin films on metallic surfaces, angle-resolved photoemission spectroscopy has evolved into a technique called photoemission tomography (PT). By approximating the final state of the photoemitted electron as a free electron, PT uses the angular dependence of the photocurrent, a so-called momentum map or k-map, and interprets it as the Fourier transform of the initial state's molecular orbital, thereby gains insights into the geometric and electronic structure of organic/metal interfaces. In this contribution, we present kMap.py which is a Python program that enables the user, via a PyQt-based graphical user interface, to simulate photoemission momentum maps of molecular orbitals and to perform a one-to-one comparison between simulation and experiment. Based on the plane wave approximation for the final state, simulated momentum maps are computed numerically from a fast Fourier transform of real space molecular orbital distributions, which are used as program input and taken from density functional calculations. The program allows the user to vary a number of simulation parameters such as the final state kinetic energy, the molecular orientation or the polarization state of the incident light field. Moreover, also experimental photoemission data can be loaded into the program enabling a direct visual comparison as well as an automatic optimization procedure to determine structural parameters of the molecules or weights of molecular orbitals contributions. With an increasing number of experimental groups employing photoemission tomography to study adsorbate layers, we expect kMap.py to serve as an ideal analysis software to further extend the applicability of PT.

Elucidating electrostatic surface potentials contributes to a deeper understanding of the nature of matter and its physicochemical properties, which is the basis for a wide field of applications. Scanning quantum dot microscopy, a recently developed technique allows to measure such potentials with atomic resolution. For an efficient deployment in scientific practice, however, it is essential to speed up the scanning process. To this end we employ a two-degree-of-freedom control paradigm, in which a Gaussian process is used as the feedforward part. We present a tailored online learning scheme of the Gaussian process, adapted to scanning quantum dot microscopy, that includes hyperparameter optimization during operation to enable fast and precise scanning of arbitrary surface structures. For the potential application in practice, the accompanying computational cost is reduced evaluating different sparse approximation approaches. The fully independent training conditional approximation, used on a reduced set of active training data, is found to be the most promising approach., Comment: This paper is currently under review for CDC 2020

The ability to handle single molecules as effectively as macroscopic building-blocks would enable the construction of complex supramolecular structures inaccessible to self-assembly. The fundamental challenges obstructing this goal are the uncontrolled variability and poor observability of atomic-scale conformations. Here, we present a strategy to work around both obstacles, and demonstrate autonomous robotic nanofabrication by manipulating single molecules. Our approach employs reinforcement learning (RL), which finds solution strategies even in the face of large uncertainty and sparse feedback. We demonstrate the potential of our RL approach by removing molecules autonomously with a scanning probe microscope from a supramolecular structure -- an exemplary task of subtractive manufacturing at the nanoscale. Our RL agent reaches an excellent performance, enabling us to automate a task which previously had to be performed by a human. We anticipate that our work opens the way towards autonomous agents for the robotic construction of functional supramolecular structures with speed, precision and perseverance beyond our current capabilities., Comment: 3 figures

We present an extension of the tunneling theory for scanning tunneling microcopy (STM) to include different types of vibrational-electronic couplings responsible for inelastic contributions to the tunnel current in the strong-coupling limit. It allows for a better understanding of more complex scanning tunneling spectra of molecules on a metallic substrate in separating elastic and inelastic contributions. The starting point is the exact solution of the spectral functions for the electronic active local orbitals in the absence of the STM tip. This includes electron-phonon coupling in the coupled system comprising the molecule and the substrate to arbitrary order including the anti-adiabatic strong coupling regime as well as the Kondo effect on a free electron spin of the molecule. The tunneling current is derived in second order of the tunneling matrix element which is expanded in powers of the relevant vibrational displacements. We use the results of an ab-initio calculation for the single-particle electronic properties as an adapted material-specific input for a numerical renormalization group approach for accurately determining the electronic properties of a NTCDA molecule on Ag(111) as a challenging sample system for our theory. Our analysis shows that the mismatch between the ab-initio many-body calculation of the tunnel current in the absence of any electron-phonon coupling to the experiment scanning tunneling spectra can be resolved by including two mechanisms: (i) a strong unconventional Holstein term on the local substrate orbital leads to reduction of the Kondo temperature and (ii) a different electron-vibrational coupling to the tunneling matrix element is responsible for inelastic steps in the $dI/dV$ curve at finite frequencies., Comment: 34 pages, 26 figure

Thin films of topological insulators (TI) usually exhibit multiple parallel conduction channels for the transport of electrical current. Beside the topologically protected surface states (TSS), parallel channels may exist, namely the interior of the not-ideally insulating TI film, the interface layer to the substrate, and the substrate itself. To be able to take advantage of the auspicious transport properties of the TSS, the influence of the parasitic parallel channels on the total current transport has to be minimized. Because the conductivity of the interior (bulk) of the thin TI film is difficult to access by measurements, we propose here an approach for calculating the mobile charge carrier concentration in the TI film. To this end, we calculate the near-surface band bending using parameters obtained experimentally from surface-sensitive measurements, namely (gate-dependent) four-point resistance measurements and angle-resolved photoelectron spectroscopy (ARPES). While in most cases another parameter in the calculations, i.e. the concentration of unintentional dopants inside the thin TI film, is unknown, it turns out that in the thin-film limit the band bending is largely independent of the dopant concentration in the film. Thus, a well-founded estimate of the total mobile charge carrier concentration and the conductivity of the interior of the thin TI film proves possible. Since the interface and substrate conductivities can be measured by a four-probe conductance measurement prior to the deposition of the TI film, the total contribution of all parasitic channels, and therefore also the contribution of the vitally important TSS, can be determined reliably., Comment: 18 pages, 10 color figures

Electrostatic forces are among the most common interactions in nature and omnipresent at the nanoscale. Scanning probe methods represent a formidable approach to study these interactions locally. The lateral resolution of such images is, however, often limited as they are based on measuring the force (gradient) due to the entire tip interacting with the entire surface. Recently, we developed scanning quantum dot microscopy (SQDM), a new technique for the imaging and quantification of surface potentials which is based on the gating of a nanometer-size tip-attached quantum dot by the local surface potential and the detection of charge state changes via non-contact atomic force microscopy. Here, we present a rigorous formalism in the framework of which SQDM can be understood and interpreted quantitatively. In particular, we present a general theory of SQDM based on the classical boundary value problem of electrostatics, which is applicable to the full range of sample properties (conductive vs insulating, nanostructured vs homogeneously covered). We elaborate the general theory into a formalism suited for the quantitative analysis of images of nanostructured but predominantly flat and conductive samples.

Determination of the molecular Kondo temperature $T_K$ poses a challenge in most cases when the experimental temperature cannot be tuned to a sufficient extent. We show how this ambiguity can be resolved if additional control parameters are present, such as magnetic field and mechanical gating. We record the evolution of the differential conductance by lifting an individual molecule from the metal surface with the tip of a scanning tunneling microscope. By fitting the measured conductance spectra with the single impurity Anderson model we are able to demonstrate that the lifting tunes the junction continuously from the strongly correlated Kondo-singlet to the free spin $1/2$ ground state. In the crossover regime, where $T_K$ is similar to the temperature of experiment, the fitting yields ambiguous estimates of $T_K$ varying by an order of magnitude. We show that analysis of the conductance measured in two distinct external magnetic fields can be used to resolve this problem., Comment: Main text: 10 pages, 6 figures; Supplementary Information: 11 pages, 5 figures

The Te-covered Si(111) surface has received recent interest as a template for the epitaxy of van der Waals (vdW) materials, e.g. Bi$_2$Te$_3$. Here, we report the formation of a Te buffer layer on Si(111)$-$(7$\times$7) by low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM). While deposition of several monolayer (ML) of Te on the Si(111)$-$(7$\times$7) surface at room temperature results in an amorphous Te layer, increasing the substrate temperature to $770\rm\,K$ results in a weak (7$\times$7) electron diffraction pattern. Scanning tunneling microscopy of this surface shows remaining corner holes from the Si(111)$-$(7$\times$7) surface reconstruction and clusters in the faulted and unfaulted halves of the (7$\times$7) unit cells. Increasing the substrate temperature further to $920\rm\,K$ leads to a Te/Si(111)$-(2\sqrt3\times2\sqrt{3})\rm R30^{\circ}$ surface reconstruction. We find that this surface configuration has an atomically flat structure with threefold symmetry.

The construction and the vibrational performance of a low vibration laboratory for microscopy applications comprising a 100 ton floating foundation supported by passive pneumatic isolators (air springs), which rest themselves on a 200 ton solid base plate is discussed. The optimization of the air spring system lead to a vibration level on the floating floor below that induced by an acceleration of 10 ng for most frequencies. Additional acoustic and electromagnetic isolation is accomplished by a room-in-room concept.

We introduce a high energy resolution electron source that matches the requirements for parallel readout of energy and momentum of modern hemispherical electron energy analyzers. The system is designed as an add-on device to typical photoemission chambers. Due to the multiplex gain, a complete phonon dispersion of a Cu(111) surface was measured in seven minutes with 4 meV energy resolution.

Interactions between atomic and molecular objects are to a large extent defined by the nanoscale electrostatic potentials which these objects produce. We introduce a scanning probe technique that enables three-dimensional imaging of local electrostatic potential fields with sub-nanometer resolution. Registering single electron charging events of a molecular quantum dot attached to the tip of a (qPlus tuning fork) atomic force microscope operated at 5 K, we quantitatively measure the quadrupole field of a single molecule and the dipole field of a single metal adatom, both adsorbed on a clean metal surface. Because of its high sensitivity, the technique can record electrostatic potentials at large distances from their sources, which above all will help to image complex samples with increased surface roughness., Comment: main text: 5 pages, 4 figures, supplementary information file: 4 pages, 2 figures

Recently, the family of high-resolution scanning probe imaging techniques using decorated tips has been complimented by a method based on inelastic electron tunneling spectroscopy (IETS). The new technique resolves the inner structure of organic molecules by mapping the vibrational energy of a single carbonmonoxide (CO) molecule positioned at the apex of a scanning tunnelling microscope (STM) tip. Here, we explain high-resolution IETS imaging by extending the model developed earlier for STM and atomic force microscopy (AFM) imaging with decorated tips. In particular, we show that the tip decorated with CO acts as a nanoscale sensor that changes the energy of the CO frustrated translation in response to the change of the local curvature of the surface potential. In addition, we show that high resolution AFM, STM and IETS-STM images can deliver information about intramolecular charge transfer for molecules deposited on a~surface. To demonstrate this, we extended our numerical model by taking into the account the electrostatic force acting between the decorated tip and surface Hartree potential., Comment: 5 pages, 4 figures

High resolution Atomic Force Microscopy (AFM) and Scanning Tunnelling Microscopy (STM) imaging with functionalized tips is well established, but a detailed understanding of the imaging mechanism is still missing. We present a numerical STM/AFM model, which takes into account the relaxation of the probe due to the tip-sample interaction. We demonstrate that the model is able to reproduce very well not only the experimental intra- and intermolecular contrasts, but also their evolution upon tip approach. At close distances, the simulations unveil a significant probe particle relaxation towards local minima of the interaction potential. This effect is responsible for the sharp sub-molecular resolution observed in AFM/STM experiments. In addition, we demonstrate that sharp apparent intermolecular bonds should not be interpreted as true hydrogen bonds, in the sense of representing areas of increased electron density. Instead they represent the ridge between two minima of the potential energy landscape due to neighbouring atoms.