Search

Susanne Prothon,1 Magnus Aurivillius,2 Ulrika Tehler,3 Ulf G Eriksson,1 Ajay Aggarwal,4 Yingxue Chen5 1Clinical Pharmacology and Quantitative Pharmacology, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Gothenburg, Sweden; 2Late Stage Development, Respiratory & Immunology, BioPharmaceuticals R&D, AstraZeneca, Gothenburg, Sweden; 3Advanced Drug Delivery, Pharmaceutical Sciences, R&D, AstraZeneca, Gothenburg, Sweden; 4Research and Early Development, Respiratory & Immunology, BioPharmaceuticals R&D, AstraZeneca, Boston, MA, USA; 5Clinical Pharmacology and Quantitative Pharmacology, Clinical Pharmacology and Safety Sciences, R&D, AstraZeneca, Boston, MA, USACorrespondence: Susanne Prothon, Clinical Pharmacology and Quantitative Pharmacology, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Pepparedsleden 1, Mölndal, Gothenburg, 431 83, Sweden, Email susanne.prothon@astrazeneca.comIntroduction: Velsecorat (AZD7594) is a non-steroidal, selective, glucocorticoid receptor modulator (SGRM), being developed for the treatment of asthma. This article reports the initial, first-in-human, single and repeat dose-escalating study in healthy male volunteers.Methods: The study comprised two parts, a single ascending dose part (n=47) and a multiple ascending dose part (n=26). Inhaled velsecorat was administered by nebulization as one single dose in the first part of the study and as a single dose with subsequent multiple daily doses (day 5– 16) for 12 days once daily in the second part of the study. At each dose level, participants were randomized to velsecorat (n=6) or placebo (n=2/3). The safety, pharmacokinetics (PK) and pharmacodynamics (PD) of velsecorat were evaluated.Results: Inhaled velsecorat was safe and well tolerated up to and including the highest dose tested (1872 μg). Plasma exposure suggested dose proportional PK. The terminal half-life following repeated dosing was 25– 31 hours and steady state conditions for velsecorat in plasma were generally reached within 4 doses. The accumulation ratio was low (≤ 2), and data did not indicate any time-dependent PK. There were dose-related effects on 24-hour plasma cortisol, plasma cortisol after ACTH stimulation and osteocalcin, systemic PD markers of glucocorticoid activity. There were no effects on other biomarkers tested (DHEA-S and 4βOH-cholesterol).Conclusion: The early clinical evaluation of inhaled velsecorat suggests that this novel SGRM is well tolerated in the dose range investigated. It shows dose proportional plasma exposure, low accumulation, and has dose-dependent effects on markers of glucocorticoid activity.Keywords: AZD7594, velsecorat, pharmacokinetics, non-steroidal glucocorticoid receptor modulator, PK

Susanne Prothon,1 Ulrika Wählby Hamrén,1 Ulrika Tehler,2 Esther Yoon,3 Henrik Forsman,4 Cecilia Arfvidsson,5 Ajay Aggarwal,6 Yingxue Chen7 1Clinical Pharmacology, ADME, and AI, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Gothenburg, Sweden; 2Early Product Development, Pharmaceutical Sciences, R&D, AstraZeneca, Gothenburg, Sweden; 3Early Phase Clinical Unit, PAREXEL, Glendale, CA, USA; 4Research and Early Development, Respiratory, Inflammation and Autoimmune (RIA), BioPharmaceuticals R&D, AstraZeneca, Gothenburg, Sweden; 5Clinical Sample and Bioanalytical Science, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Gothenburg, Sweden; 6Research and Early Development, Respiratory, Inflammation and Autoimmune (RIA), BioPharmaceuticals R&D, AstraZeneca, Boston, MA, USA; 7Clinical Pharmacology, ADME, and AI, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Boston, MA, USACorrespondence: Susanne ProthonClinical Pharmacology, ADME, and AI, Clinical Pharmacology & Safety Sciences, R&D, AstraZeneca, Pepparedsleden 1, Mölndal 431 83, SwedenEmail susanne.prothon@astrazeneca.comIntroduction: AZD7594 is a non-steroidal, selective, glucocorticoid receptor modulator (SGRM), currently in development for the treatment of asthma and chronic obstructive pulmonary disease. This paper reports a randomized placebo-controlled dose escalation study in healthy Japanese male subjects.Methods: Inhaled AZD7594 was administered as one single dose at day 1 (day 1–4), with subsequent multiple daily doses (day 5–16) via a multiple-dose dry powder inhaler for 12 days of once-daily treatment. At each dose level, subjects were randomized to AZD7594 (n=7) or placebo (n=2). The safety, pharmacokinetics (PK) and pharmacodynamics (PD) of AZD7594 were evaluated.Results: Inhaled AZD7594 was safe and well tolerated up to and including the highest dose 1600 μg tested. Plasma exposure suggested dose-proportional PK. The urinary excretion of AZD7594 was negligible (

The day and age where pharmaceutical institutions were securely nestled within solid walls in one country, without much communication and collaboration with other sites and external collaborators, are long gone. The move to more global communication and collaboration has been beneficial for science exploration, however, it has presented scientists with the challenge of working on global teams. This article will explore this world-wide-working web and provide guidance on how to be successful in this new environment in the pharmaceutical industry and related work institutions. Four angles will be explored - intercultural awareness, virtual working and non-standard working hours, personal and team goals and how to be authentic in this new environment. The article will conclude with a road-map that the reader can follow, when embarking on the global team journey., Competing Interests: Declaration of interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests A.B. and L.Z. are employed by AstraZeneca PLC, U.T. and M.Y.A are employed by AstraZeneca AB., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

In this article, we specify for the first time a quantitative biopharmaceutics classification system for orally inhaled drugs. To date, orally inhaled drug product developers have lacked a biopharmaceutics classification system like the one developed to navigate the development of immediate release of oral medicines. Guideposts for respiratory drug discovery chemists and inhalation product formulators have been elusive and difficult to identify due to the complexity of pulmonary physiology, the intricacies of drug deposition and disposition in the lungs, and the influence of the inhalation delivery device used to deliver the drug as a respirable aerosol. The development of an inhalation biopharmaceutics classification system (iBCS) was an initiative supported by the Product Quality Research Institute (PQRI). The goal of the PQRI iBCS working group was to generate a qualitative biopharmaceutics classification system that can be utilized by inhalation scientists as a "rule of thumb" to identify desirable molecular properties and recognize and manage CMC product development risks based on physicochemical properties of the drug and the deposited lung dose. Herein, we define the iBCS classes quantitatively according to the dose number and permeability. The proposed iBCS was evaluated for its ability to categorize marketed inhaled drugs using data from the literature. The appropriateness of the classification of each drug was assessed based on published development, clinical and nonclinical data, and mechanistic physiologically based biopharmaceutics modeling. The inhaled drug product development challenges for each iBCS classification are discussed and illustrated for different classes of marketed inhaled drugs. Finally, it is recognized that discriminatory laboratory methods to characterize regional lung deposition, dissolution, and permeability will be key to fully realizing the benefits of an iBCS to streamline and derisk inhaled drug development.

Dissolution rate impacts the absorption rate of poorly soluble inhaled drugs. In vitro dissolution tests that can capture the impact of changes in critical quality attributes of the drug product on in vivo dissolution are important for the development of products containing poorly soluble drugs, as well as modified release formulations. In this study, an extended mathematical model allowing for dissolution of polydisperse powders and subsequent diffusion of dissolved drug across a membrane is described. In vitro dissolution profiles of budesonide, fluticasone propionate, and beclomethasone dipropionate delivered from three commercial drug products were determined using a membrane-type Transwell dissolution test, which consists of a donor and an acceptor compartment separated by a membrane. Subsequently, the profiles were analyzed using the developed mechanistic model and a semi-empirical model based on the Weibull distribution. The two mathematical models provided the same rank order of the performance of the three drug products in terms of dissolution rates, but the rates were significantly different. The faster rate extracted from the mechanistic model is expected to reflect the true dissolution rate of the drug; the Weibull model provides an effective and slower rate that represents not only drug dissolution but also diffusion across the Transwell membrane. In conclusion, the developed extended model provides superior understanding of the dissolution mechanisms in membrane-type (Transwell) dissolution tests.

For oral drugs, the formulator and discovery chemist have a tool available to them that can be used to navigate the risks associated with the selection and development of immediate release oral drugs and drug products. This tool is the biopharmaceutics classification system (giBCS). Unfortunately, no such classification system exists for inhaled drugs. The perspective outlined in this manuscript provides the foundational principles and framework for a classification system for inhaled drugs. The proposed classification system, an inhalation-based biopharmaceutics classification system (iBCS), is based on fundamental biopharmaceutics principles adapted to an inhalation route of administration framework. It is envisioned that a classification system for orally inhaled drugs will facilitate an understanding of the technical challenges associated with the development of new chemical entities and their associated new drug products (device and drug formulation combinations). Similar to the giBCS, the iBCS will be based on key attributes describing the drug substance (solubility and permeability) and the drug product (dose and dissolution). This manuscript provides the foundational aspects of an iBCS, including the proposed scientific principles and framework upon which such a system can be developed.

This work is the second in a series of publications outlining the fundamental principles and proposed design of a biopharmaceutics classifications system for inhaled drugs and drug products (the iBCS). Here, a mechanistic computer-based model has been used to explore the sensitivity of the primary biopharmaceutics functional output parameters: (i) pulmonary fraction dose absorbed ( F abs ) and (ii) drug half-life in lumen ( t 1/2 ) to biopharmaceutics-relevant input attributes including dose number (Do) and effective permeability ( P eff ). Results show the nonlinear sensitivity of primary functional outputs to variations in these attributes. Drugs with Do < 1 and P eff > 1 × 10 -6 cm/s show rapid ( t 1/2 < 20 min) and complete ( F abs > 85%) absorption from lung lumen into lung tissue. At Do > 1, dissolution becomes a critical drug product attribute and F abs becomes dependent on regional lung deposition. The input attributes used here, Do and P eff , thus enabled the classification of inhaled drugs into parameter spaces with distinctly different biopharmaceutic risks. The implications of these findings with respect to the design of an inhalation-based biopharmaceutics classification system (iBCS) and to the need for experimental methodologies to classify drugs need to be further explored.

Background: Epithelial sodium channel (ENaC) inhibitors may offer clinical benefit in cystic fibrosis (CF); however, data are limited. We report the outcomes of a Phase I (NCT02679729) and a Phase Ib (NCT02950805) study of AZD5634, a novel inhaled ENaC inhibitor., Methods: A Phase I, first-in-human, single-blind, placebo-controlled, single ascending dose, sequential dose group study assessed the safety, tolerability, and pharmacokinetics of AZD5634 in healthy subjects (n=53) in part A following inhaled doses up to 1700 µg, and, in part B, following administration of single inhaled (1700 µg) and intravenous (65 µg) doses. A Phase Ib, randomized, double-blind, placebo-controlled, single-dose, 2-way cross-over study assessed the effects of a single dose (600 µg) of inhaled AZD5634 on mucociliary clearance (MCC), pharmacokinetics and safety and tolerability in patients with CF (n=11). Nasal potential difference (NPD) was assessed as an in situ target engagement exploratory biomarker., Results: Absolute bioavailability of AZD5634 after inhalation was approximately 3%, indicating minimal distribution into the systemic circulation. Urinary excretion was a minor elimination pathway. Administration of inhaled AZD5634 did not improve MCC in CF patients, but AZD5634 inhibited ENaC in the nasal epithelium, as measured by NPD. AZD5634 was safe and well tolerated in both studies., Conclusions: AZD5634 showed favorable pharmacokinetics and safety in healthy subjects and patients with CF. However, despite achieving target engagement, proof of mechanism was not achieved after a single dose in patients with CF. Further evaluation into multiple dose studies is warranted to explore its therapeutic potential., Competing Interests: Declaration of Competing Interest Annika Åstrand, Tobias Bramer, Eva Ersdal, Philip Gardiner, Christina Keen, Cecilia Kristensson, Anna Malmgren, Jukka Mäenpää, Anne-Kristina Mercier, Marita Olsson and Ulrika Tehler are employees of AstraZeneca, and may own stock or stock options., (Copyright © 2022. Published by Elsevier B.V.)

Hydrogels warrant attention as a potential material for use in sustained pulmonary drug delivery due to their swelling and mucoadhesive features. Herein, hyaluronic acid (HA) is considered a promising material due to its therapeutic potential, the effect on lung inflammation, and possible utility as an excipient or drug carrier. In this study, the feasibility of using HA hydrogels (without a model drug) to engineer inhalation powders for controlled pulmonary drug delivery was assessed. A combination of chemical crosslinking and spray-drying was proposed as a novel methodology for the preparation of inhalation powders. Different crosslinkers (urea; UR and glutaraldehyde; GA) were exploited in the hydrogel formulation and the obtained powders were subjected to extensive characterization. Compositional analysis of the powders indicated a crosslinked structure of the hydrogels with sufficient thermal stability to withstand spray drying. The obtained microparticles presented a spherical shape with mean diameter particle sizes from 2.3 ± 1.1 to 3.2 ± 2.9 μm. Microparticles formed from HA crosslinked with GA exhibited a reasonable aerosolization performance (fine particle fraction estimated as 28 ± 2%), whereas lower values were obtained for the UR-based formulation. Likewise, swelling and stability in water were larger for GA than for UR, for which the results were very similar to those obtained for native (not crosslinked) HA. In conclusion, microparticles could successfully be produced from crosslinked HA, and the ones crosslinked by GA exhibited superior performance in terms of aerosolization and swelling.

Background: The lower respiratory tract of the landrace pig has close anatomical and physiological similarities with that of the human, and hence, for inhalation studies this species is well suited for biopharmaceutical research. Methods: The objective of this study was to evaluate pharmacokinetics in pigs following one dose of Diskus™ Seretide™ forte device, labeled 500/50 fluticasone propionate (FP) and salmeterol xinafoate (SX), respectively. The PreciseInhale™ (PI) instrument was used to actuate the inhaler for in vitro testing and aerosol dosing to pigs. In vitro , the aerosol was characterized with a cascade impactor with respect to mass median aerodynamic diameter, geometric standard deviation, and fine particle dose. In vivo , dry powder inhalation exposure was delivered as a short bolus dose, to anesthetized and mechanically ventilated landrace pigs. In addition to plasma PK, PK assessment of airway epithelial lining fluid (ELF) was used in this study. ELF of the depth of three to fourth airway generation of the right lung was accessed using standard bronchoscopy and a synthetic absorptive matrix. Results and Conclusions: Dry powder inhalation exposures with good consistency and well characterized aerosols to the pig lung were achieved by the use of the PreciseInhale™ instrument. Drug concentrations of ELF for both FP and SX were demonstrated to be four to five orders of magnitude higher than its corresponding systemic plasma drug concentrations. Clinical PK following inhalation of the same dose was used as benchmark, and the clinical study did demonstrate similar plasma PK profiles and drug exposures of both FP and SX as the current pig study. Two factors explain the close similarity of PK (1) similiar physiology between species and (2) the consistency of dosing to animals. To conclude, our study demonstrated the utility and translational potential of conducting PK studies in pigs in the development of inhaled pharmaceuticals.

Impactor-type dose deposition is a common prerequisite for dissolution testing of inhaled medicines, and drug release typically takes place through a membrane. The purpose of this work is to develop a mechanistic model for such combined dissolution and release processes, focusing on a drug that initially is present in solid form. Our starting points are the Noyes-Whitney (or Nernst-Brunner) equation and Fick's law. A detailed mechanistic analysis of the drug release process is provided, and approximate closed-form expressions for the amount of the drug that remains in solid form and the amount of the drug that has been released are derived. Comparisons with numerical data demonstrated the accuracy of the approximate expressions. Comparisons with experimental release data from literature demonstrated that the model can be used to establish rate-controlling release mechanisms. In conclusion, the model constitutes a valuable tool for the analysis of in vitro dissolution data for inhaled drugs.

Computational modeling together with experimental data are essential to assess the risk for particulate matter mediated lung toxicity and to predict the efficacy, safety and fate of aerosolized drug molecules used in inhalation therapy. In silico models are widely used to understand the deposition, distribution, and clearance of inhaled particles and aerosols in the human lung. Exacerbations of chronic obstructive pulmonary disease (COPD) have been reported due to increased particulate matter related air pollution episodes. Considering the profound functional, anatomical and structural changes occurring in COPD lungs, the relevance of the existing in silico models for mimicking diseased lungs warrants reevaluation. Currently available computational modeling tools were developed for the healthy adult (male) lung. Here, we analyze the major alterations occurring in the airway structure, anatomy and pulmonary function in the COPD lung, as compared to the healthy lung. We also scrutinize the various physiological and particle characteristics that influence particle deposition, distribution and clearance in the lung. The aim of this review is to evaluate the availability of the fundamental knowledge and data required for modeling particle deposition in a COPD lung departing from the existing healthy lung models. The extent to which COPD pathophysiology may affect aerosol deposition depends on the relative contribution of several factors such as altered lung structure and function, bronchoconstriction, emphysema, loss of elastic recoil, altered breathing pattern and altered liquid volumes that warrant consideration while developing physiologically relevant in silico models.

Pulmonary dissolution of poorly soluble drug substances (DSs) may limit the drug absorption rate and consequently influence clinical performance. Dissolution rate is thus an important quality attribute, and its influence on in vivo drug release must be characterized, understood, and controlled early in the development process. The aim of this study is to establish an in vitro dissolution method with the capability to capture therapeutically relevant differences in the dissolution rate between drug batches and drug compounds. A method was developed by which a biorelevant aerosol fraction was captured on a filter using a sedimentation technique in a modified Andersen cascade impactor to avoid particle agglomeration. Subsequently, the filters were transferred to a commercial Transwell system where dissolution in 3 mL of phosphate buffer at pH 6.8 with 0.5% sodium dodecyl sulfate (SDS) occurred at sink conditions. Dissolved DS was quantified over time using UPLC-UV. Dissolution data was obtained on a series of micronized and aerosolized lipophilic DSs, budesonide, fluticasone furoate (FF), fluticasone propionate (FP), and AZD5423. The latter is a lipophilic AstraZeneca development compound available in two different mass median diameters (MMD), 1.3 (AZD5423 1.3 ) and 3.1 μm (AZD5423 3.1 ). Dissolution data were evaluated using a Weibull fit and expressed as t 63 , the time to dissolution of 63% of the initial dose. The following rank-order of t 63 was obtained (mean t 63 and MMD in brackets), budesonide (10 min, 2.1 μm) = AZD5423 1.3 (10 min, 1.3 μm) < AZD5423 3.1 (19 min, 3.1 μm) < FP (38 min, 2.4 μm) < FF (63 min, 2.5 μm). The method could differentiate between different drug compounds with different solubility but similar particle size distribution, as well as between the same drug compound with different particle size distributions. Furthermore, a relation between the in vitro dissolution rate ( t 63 ) and mean pulmonary absorption time in man (literature data) was observed, indicating clinical relevance. It is thus concluded, that the method may be useful for the characterization and ranking of DSs and drug products in early development, as well as being a potential tool for the control of dissolution as a potential quality attribute.

A class of potent, nonsteroidal, selective indazole ether-based glucocorticoid receptor modulators (SGRMs) was developed for the inhaled treatment of respiratory diseases. Starting from an orally available compound with demonstrated anti-inflammatory activity in rat, a soft-drug strategy was implemented to ensure rapid elimination of drug candidates to minimize systemic GR activation. The first clinical candidate 1b (AZD5423) displayed a potent inhibition of lung edema in a rat model of allergic airway inflammation following dry powder inhalation combined with a moderate systemic GR-effect, assessed as thymic involution. Further optimization of inhaled drug properties provided a second, equally potent, candidate, 15m (AZD7594), that demonstrated an improved therapeutic ratio over the benchmark inhaled corticosteroid 3 (fluticasone propionate) and prolonged the inhibition of lung edema, indicating potential for once-daily treatment.

Background: Exposure following oral inhalation depends on the deposition pattern of the inhaled aerosol, the extent and rate of oral and pulmonary absorption, as well as systemic distribution and clearance. For lipophilic inhaled compounds with low water solubility and high permeability, the extent and rate of pulmonary absorption can be assumed dependent on deposition pattern as well as dissolution rate., Materials and Methods: A mechanistic model of airway deposition, mucociliary clearance, dissolution, absorption, and dissipation was applied to simulate systemic exposure of the novel selective glucocorticoid receptor modulator, AZD5423, when dosed to healthy volunteers using two different nebulizers and two different dry powder inhalers in combination with two different primary particle size distributions. Results from simulations were compared with observed pharmacokinetic data., Results: Variations in systemic exposure (plasma concentration profile, AUC, and C max ) resulting from variations in dose, deposition pattern, and dissolution rate could not be predicted solely from variations in delivered dose or predicted lung dose (as assessed using an anatomical mouth-throat model), suggesting incomplete pulmonary bioavailability. However, simulated systemic exposure well predicted observed systemic exposures for all tested formulations and devices. Furthermore, simulations of airway tissue exposure suggested that it was not directly linked to systemic exposure., Conclusions: Results support the initial hypothesis that systemic exposure of poorly soluble inhaled drugs is a complex but predictable function of dose, deposition pattern, and rate of dissolution. Furthermore, simulations indicate that local exposure for these types of drugs is not well correlated with systemic exposure. Hence, equivalence with respect to local exposure, and thus with respect to pharmacodynamic effect, cannot be fully inferred from systemic pharmacokinetic equivalence alone.

Esterification was used to simultaneously increase solubility and permeability of ciprofloxacin, a biopharmaceutics classification system (BCS) class 4 drug (low solubility/low permeability) with solid-state limited solubility. Molecular flexibility was increased to disturb the crystal lattice, lower the melting point, and thereby improve the solubility, whereas lipophilicity was increased to enhance the intestinal permeability. These structural changes resulted in BCS class 1 analogues (high solubility/high permeability) emphasizing that simple medicinal chemistry may improve both these properties.

Cidofovir (HPMPC) is a broad-spectrum antiviral agent, currently used to treat AIDS-related human cytomegalovirus retinitis. Cidofovir has recognized therapeutic potential for orthopox virus infections, although its use is hampered by its inherent low oral bioavailability. Val-Ser-cyclic HPMPC (Val-Ser-cHPMPC) is a promising peptide prodrug which has previously been shown by us to improve the permeability and bioavailability of the parent compound in rodent models (Eriksson et al., 2008. Molecular Pharmaceutics 5, 598-609). Puromycin-sensitive aminopeptidase was partially purified from Caco-2 cell homogenates and identified as a prodrug activating enzyme for Val-Ser-cHPMPC. The prodrug activation process initially involves an enzymatic step where the l-Valine residue is removed by puromycin-sensitive aminopeptidase, a step that is bestatin-sensitive. Subsequent chemical hydrolysis results in the generation of cHPMPC. A recombinant puromycin-sensitive aminopeptidase was generated and its substrate specificity investigated. The k(cat) for Val-pNA was significantly lower than that for Ala-pNA, suggesting that some amino acids are preferred over others. Furthermore, the three-fold higher k(cat) for Val-Ser-cHPMPC as compared to Val-pNA suggests that the leaving group may play an important role in determining hydrolytic activity. In addition to its ability to hydrolyze a variety of substrates, these observations strongly suggest that puromycin-sensitive aminopeptidase is an important enzyme for activating Val-Ser-cHPMPC in vivo. Taken together, our data suggest that puromycin-sensitive aminopeptidase makes an attractive target for future prodrug design.