Search

In this paper, a 12-sided polygonal voltage space vector generation with common-mode voltage elimination (CME) is proposed for an induction motor drive. An open-end winding configuration is used for the motor. The proposed multilevel structure is achieved by cascading only the conventional two-level inverters with asymmetrical dc link voltages. By appropriately selecting the voltage vectors with identical common-mode voltage from the opposite ends, a pulsewidth modulation (PWM) strategy with zero common-mode voltage variation can be achieved for the entire modulation range with a common dc link requirement for both the inverter systems. Along with the CME, the proposed 12-sided polygonal space vector based multilevel inverter structure has increased modulation range with the absence of 5th, 7th, 17th, 19th, etc., harmonics up to 12-step operation. The bandwidth problems associated with conventional hexagonal voltage space vector structure current controllers due to the presence of 5th and 7th harmonics in the overmodulation region are absent in the present 12-sided structure. So a simple PWM voltage control with linear voltage control up to 12-step operation is possible from the present 12-sided scheme with less current control complexity. Index Terms--Common-mode voltage elimination (CME), multilevel inverter, polygonal voltage space vector.

A current error space phasor based simple hysteresis controller is proposed in this paper to control the switching frequency variation in two-level pulsewidth-modulation (PWM) inverter-fed induction motor (IM) drives. A parabolic boundary for the current error space phasor is suggested for the first time to obtain the switching frequency spectrum for output voltage with hysteresis controller similar to the constant switching frequency voltage-controlled space vector PWM-based IM drive. A novel concept of online variation of this parabolic boundary, which depends on the operating speed of motor, is presented. A generalized technique that determines the set of unique parabolic boundaries for a two-level inverter feeding any given induction motor is described. The sector change logic is self-adaptive and is capable of taking the drive up to the six-step mode if needed. Steady-state and transient performance of proposed controller is experimentally verified on a 3.7-kW IM drive in the entire speed range. Close resemblance of the simulation and experimental results is shown. Index Terms--Current error space phasor, hysteresis controller, parabolic boundary, switching frequency variation control.

For a dual five-level inverter-fed induction motor (IM) drive, effects of dc-neutral currents on dc-link capacitor voltage fluctuations are analyzed in this paper. Operating limitations in achieving the dual task of common-mode voltage elimination and dc-link capacitor voltage balancing with a single dc power supply are further investigated for the proposed drive. In this paper, an open-loop control scheme, which uses only the availability of redundant switching states for the inverter control, is presented. Limitation of proposed open-loop control to take corrective action for any existing unbalance in capacitor voltages calls for a closed-loop control scheme, which is presented in Part II of this paper. Index Terms--Common-mode voltage (CMV) elimination, dc-link capacitor voltage balancing, induction motor (IM) drive, multilevel inverter, open-loop control, switching-state redundancy.

The paper presents a five-level inverter scheme with reduced power circuit complexity for an induction motor drive. The scheme is realized by cascading conventional two-level and three-level neutral point clamped inverters in conjunction with an open-end winding three-phase induction motor drive. An inverter control scheme with common-mode voltage (CMV) elimination, along with a simple dc link voltage control, is developed by using only switching states with zero CMV for the entire modulation range. Theoretical considerations are experimentally verified for a variety of operating conditions. Index Terms--Common-mode voltage (CMV) elimination, induction motor drives, multilevel inverter, open-end winding structure.

A dc link capacitor voltage balancing scheme along with common mode voltage elimination is proposed for an induction motor drive, with open-end winding structure. The motor is fed from both the ends with three-level inverters generating a five level output voltage space phasor structure. If switching combinations, with zero common mode voltage in the pole voltage, are used, then the resultant voltage space vector combinations are equivalent to that of a three-level inverter. The proposed inverter vector locations exhibit greater multiplicity in the inverter switching combinations which is suitably exploited to arrive at a capacitor voltage balancing scheme. This allows the use of a single dc link power supply for the combined inverter structure. The simultaneous task of common mode voltage elimination with dc link capacitor voltage balancing, using only the switching state redundancies, is experimentally verified on a 1.5-kW induction motor drive. Index Terms--Capacitor voltage balancing, common mode voltage elimination, multilevel inverters.

Split-phase (six-phase) induction motor stator windings consist of two sets of three phase windings, which are spatially phase separated by 30 electrical degrees. Due to mutual cancellation of the air gap flux for all the 6n [+ or -] 1 (n : 1, 3, 5....) order harmonic voltages, called zero sequence components, large harmonic currents are generated in the stator phases. Only the 12n [+ or -] 1 (n = 0, 1, 2, 3....)-order harmonic voltage components contribute toward the air gap flux and electromagnetic torque production in the machine. In this paper, a novel scheme is proposed where two six-phase induction motors are connected in series with proper phase sequence so that the zero sequence component voltages of one machine act as torque and flux producing components for the other. Thus, the two six-phase motors can be independently controlled from a single six-phase inverter. A vector control scheme for the dual motor drive is developed and experimentally verified in this paper. Index Terms--multiphase winding, series-connected multimotor control, vector control.