Search

Plane, nonlinear Rayleigh wave propagation is investigated in a three-layer sandwich structure of a thermoelastic medium, within the frame of dual-phase-lag theory. The thermal conductivity is taken as a linear function of temperature. This induces nonlinearity in the evolution equations for the heat flux components. A particular solution is found in the form of Poincaré expansion in a small parameter that reflects the fluctuations of temperature about a steady value. This solution is discussed and plots are provided for a special case when both external faces of the structure are traction-free and under prescribed temperature regime. It is noted, in particular, that some quantities of practical interest suffer jumps at the interfaces. Some of the jumps appear only starting from the second order of approximation. The existence of jumps may be favourably used to carry out some measurements of material parameters. [ABSTRACT FROM AUTHOR]

Abstract Plane, nonlinear Rayleigh wave propagation is investigated in a three-layer sandwich structure of a thermoelastic medium, within the frame of dual-phase-lag theory. The thermal conductivity is taken as a linear function of temperature. This induces nonlinearity in the evolution equations for the heat flux components. A particular solution is found in the form of Poincaré expansion in a small parameter that reflects the fluctuations of temperature about a steady value. This solution is discussed and plots are provided for a special case when both external faces of the structure are traction-free and under prescribed temperature regime. It is noted, in particular, that some quantities of practical interest suffer jumps at the interfaces. Some of the jumps appear only starting from the second order of approximation. The existence of jumps may be favourably used to carry out some measurements of material parameters.

AbstractMicro/nano-scale transient thermo-mechanical responses are significantly important with rapid development and applications of ultra-short pulse in micro-machining of viscoelastic structure. This work aims to establish non-Fourier thermo-viscoelastic model based on nonlocal single-phase-lag heat conduction and Eringen’s differential elasticity. The developed model is applied to study thermo-viscoelastic responses for 1D temperature-dependent polymer-based rods subjected to non-Gaussian laser pulse excitation by Kirchhoff and Laplace transformation techniques. The results reveal that the parameters of the deformation, pulse laser, and nonlocal single-phase-lag heat conduction remarkably affect the wave propagations and thermo-viscoelastic response at micro/nano-scale nanoscale. [ABSTRACT FROM AUTHOR]

This paper explores the distribution and features of residual stresses formed by super duplex stainless steel pipe welding. Experimental investigations, which encompass an elevated temperature tensile test and metallographic observation along with a hardness test and residual stress measurement, were first conducted to obtain the mechanical properties at high base metal temperatures and to confirm whether or not the duplex stainless steel undergoes martensitic phase development during the welding process. Finally, experiments were performed to scrutinize the residual stress evolution through the metallurgical phase transformation in the weld region and its vicinity. A sequentially coupled 3D thermal, mechanical and metallurgical finite element (FE) model capable of incorporating the experimental consequences was established next. A 3D FE simulation of the girth welding process was conducted, and the axial and hoop residual stress profiles along the girth were evaluated. The results substantiate that martensitic phase evolution occurs in the process of cooling during the welding of super duplex stainless steel, and they also highlight the significance of taking the metallurgical phase transformation into account in the numerical reproduction of the girth welding process for the accurate expression of weld-induced residual stresses, which is especially important for precisely predicting hoop residual stresses. [ABSTRACT FROM AUTHOR]

High-temperature pipelines are susceptible to defects due to the long-term service in high-temperature environments. The guided wave technology is promising for online non-destructive testing. Before implementing it in engineering, it is essential to better understand guided wave characteristics, especially attenuation, which significantly decreases the test distance and the resolution. However, describing the large attenuation is challenging due to the strong thermoelastic coupling, resulting in limitations of available models. To address these limitations, this paper aims to introduce a memory-dependent generalized thermoelastic model for investigating guided waves propagating in a hollow cylinder with temperature-dependent material properties. The analytical solutions are obtained using the Legendre polynomial method. The influence of the memory-dependent effect, temperature variation, and boundary conditions are studied. Some interesting findings are revealed: (1) The time delay factor is more dominant when adjusting κ and n to accurately describe guided wave propagation at high temperatures. (2): The mode conversion is accompanied by the attenuation and group velocity jump when the adjacent flexural torsional and longitudinal modes intersect, which is advisable to avoid when choosing the excitation frequency. (3) The relationship between phase velocity and attenuation versus temperature for quasi-elastic modes is nonlinear, while that for thermal modes is approximately linear.

Thermoelectric generator (TEG) with improved performance is a promising technology in power supply and energy harvesting. Existing studies primarily adopt constant material properties to investigate TEG performance. However, thermoelectric (TE) material properties are subjected to considerable variations with temperature. Thus, reasonable doubts have risen concerning the influence level of temperature-dependent material properties on TEG performance. To solve this problem, an efficient and a comprehensive one-dimensional numerical model is developed to fully consider the third-order polynomial temperature-dependent thermal conductivity, Seebeck coefficient, and electrical resistivity. Control volume and finite difference algorithms are compared, and experiments are conducted to verify the developed numerical model. The temperature distribution along the TE leg obviously differs from the parabolic shape, which is a classic temperature distribution under the assumption of constant material properties. Insights find that the local change rate of thermal conductivity and Thomson effect are the essential reasons for the abovementioned phenomenon. It has been found that Thomson heat is released in the part of the leg near the cold-end, whereas it is absorbed in the remaining parts of the leg near the hot-end. The electric power on the basis of constant material properties is confirmed to be accurate enough by the developed numerical model, but the parabolic shape of the TE efficiency can be only obtained when temperature-dependent material properties are considered. Furthermore, it is wise to improve the TE efficiency by structural optimization. The present work provides an efficient and a comprehensive one-dimensional numerical model to include temperature-dependent material properties. New insights into the temperature and heat flux distribution, Thomson influence, and structural optimization potential are also presented for the in-depth understanding of the TE conversion process. [ABSTRACT FROM AUTHOR]

A thermoelastic topology optimization is proposed for structures with temperature-dependent material properties. Different from the common assumption of constant material properties in traditional thermoelastic topology optimization, the temperature-dependent material properties related to mechanical and thermal fields are taken into account. The non-uniform temperature distribution of the structure is a design dependent field that may vary during the optimization, and the nonlinear heat transfer analysis is considered according to the large temperature gradient. Based on these, a thermoelastic topology optimization model considering temperature-dependent material properties is formulated. The sensitivities with respect to the design variables are derived and the Method of Moving Asymptotes (MMA) algorithm is used to update the topological design variables. A cooperation platform based on MATLAB and ABAQUS is developed for the proposed thermoelastic topology optimization method to deal with problems with arbitrary domains for the design of complex engineering structures. Several typical numerical examples are given to illustrate the effectiveness of the proposed method and show the important influence of the temperature-dependent material properties. [ABSTRACT FROM AUTHOR]

In this work, high temperature and large temperature gradient are addressed for the first time in the topology optimization of thermo‐elastic structures. The conventional assumption of constant material properties (CMPs) is broken through with the full consideration of temperature‐dependent material properties (TDMPs) including thermal conductivity, elastic tensor, and coefficient of thermal expansion. Nonlinear heat conduction is thus implemented to give varying temperature fields in thermoelasticity. The maximum displacement of the specified region is taken as the objective function in the formulation of the optimization problem. The Kreisselmeier‐Steinhauser (KS) function is employed to approximate the regional maximum displacement/temperature. Corresponding sensitivity analyses, which are carried out using the adjoint method, theoretically reveal how TDMPs affect the thermo‐elastic optimization problem. Typical numerical examples are investigated to validate the proposed approach. The results show that the use of TDMPs produces optimized structures of high fidelity with displacements precisely predicted and temperature constraints rigorously satisfied under large temperature gradient, while thermo‐elastic analysis and optimization with CMPs lead to undesirable designs with significant inaccuracy. [ABSTRACT FROM AUTHOR]

Thermoelectric generator (TEG) with improved performance is a promising technology in power supply and energy harvesting. Existing studies primarily adopt constant material properties to investigate TEG performance. However, thermoelectric (TE) material properties are subjected to considerable variations with temperature. Thus, reasonable doubts have risen concerning the influence level of temperature-dependent material properties on TEG performance. To solve this problem, an efficient and a comprehensive one-dimensional numerical model is developed to fully consider the third-order polynomial temperature-dependent thermal conductivity, Seebeck coefficient, and electrical resistivity. Control volume and finite difference algorithms are compared, and experiments are conducted to verify the developed numerical model. The temperature distribution along the TE leg obviously differs from the parabolic shape, which is a classic temperature distribution under the assumption of constant material properties. Insights find that the local change rate of thermal conductivity and Thomson effect are the essential reasons for the abovementioned phenomenon. It has been found that Thomson heat is released in the part of the leg near the cold-end, whereas it is absorbed in the remaining parts of the leg near the hot-end. The electric power on the basis of constant material properties is confirmed to be accurate enough by the developed numerical model, but the parabolic shape of the TE efficiency can be only obtained when temperature-dependent material properties are considered. Furthermore, it is wise to improve the TE efficiency by structural optimization. The present work provides an efficient and a comprehensive one-dimensional numerical model to include temperature-dependent material properties. New insights into the temperature and heat flux distribution, Thomson influence, and structural optimization potential are also presented for the in-depth understanding of the TE conversion process.

Article Highlights Fully coupled-thermoelastic analysis of a thick-wall cylinder consider temperature-dependent material properties. Investigation on the effect of thermal accumulation due to cyclic thermo-mechanical loads. A comparative study between the impact of considering TIMP and TDMP on the accuracy of the results.

This paper aims to investigate the influence of material uncertainties on the postbuckling behaviour of functionally graded porous beams reinforced with graphene platelets when subjected to a thermal environment. A comprehensive deterministic, as well as stochastic study, has been done by employing the stochastic finite element methodology. The temperature-dependent (TD) and temperature-independent (TID) material properties have been considered. The homogenized effective material properties such as Young’s modulus are estimated by using the Halpin-Tsai micromechanics model and the density, and thermal expansion coefficient by Voigt’s rule of mixture. The homogenized material properties are assumed to be varying along the thickness direction in a functionally graded manner. The developed formulation is based on higher-order shear deformation theory in conjunction with Von-Kármán type geometric non-linearity for the postbuckling analysis. A C0 finite element model is developed to solve the system of non-linear governing equations, which are solved numerically using the direct iterative procedure. The convergence and validation study of the developed formulation has also been performed with an independent Monte Carlo simulation to ensure the accuracy of the formulation. The influence of material uncertainty on the thermo-mechanical postbuckling behavior of FG-GPLRC porous beams has been discussed for low variability (randomness) in material design parameters such as porosity content, amount of nanofillers, and material properties (i.e., Young’s modulus, density of metal matrix, and nanofillers) respectively. It was revealed that uncertainties in material properties can significantly affect the postbuckling response of FG-GPLRC porous beams. [ABSTRACT FROM AUTHOR]

This paper explores the distribution and features of residual stresses formed by super duplex stainless steel pipe welding. Experimental investigations, which encompass an elevated temperature tensile test and metallographic observation along with a hardness test and residual stress measurement, were first conducted to obtain the mechanical properties at high base metal temperatures and to confirm whether or not the duplex stainless steel undergoes martensitic phase development during the welding process. Finally, experiments were performed to scrutinize the residual stress evolution through the metallurgical phase transformation in the weld region and its vicinity. A sequentially coupled 3D thermal, mechanical and metallurgical finite element (FE) model capable of incorporating the experimental consequences was established next. A 3D FE simulation of the girth welding process was conducted, and the axial and hoop residual stress profiles along the girth were evaluated. The results substantiate that martensitic phase evolution occurs in the process of cooling during the welding of super duplex stainless steel, and they also highlight the significance of taking the metallurgical phase transformation into account in the numerical reproduction of the girth welding process for the accurate expression of weld-induced residual stresses, which is especially important for precisely predicting hoop residual stresses.

The thermo-elastic response of plates functionally graded in two directions (2D-FGRPs) is investigated by the theory of elasticity. Material properties are a function of temperature and are graded along the plane. The finite difference method (FDM) is used to solve the transient heat conduction and the Elasticity's Navier equations. Sets of linear equations are solved by singular value decomposition (SVD). This study aims to determine the temperature dependence of the material properties of 2D-FGRPs and the effect of composition gradient on temperature and stress levels. It is emphasized that the material properties of 2D-FGRP change significantly with temperature. [ABSTRACT FROM AUTHOR]

Composite laminated thin-walled structures, widely used in high-speed aircrafts, undergo a complex thermal–mechanical coupling environment. Geometrical nonlinearities with a thermal effect bring significant challenge to finite element analysis of structures. In this paper, a novel hybrid-stress method based on the solid-shell element is proposed for nonlinear thermoelastic analysis. An eight-node solid-shell element (CSSH8) is developed based on the assumed natural strain method and hybrid-stress formulations to overcome various locking problems and achieve an effective 3D simulation for structures with a large span-thickness ratio. The Green–Lagrange displacement-strain relation is selected to take the geometrical nonlinearities into account. The modified generalized laminate constitutive model is extended to consider both the thermal expansion and temperature-dependent material properties. A temperature variation along the laminate thickness can also be assumed in the constitutive model. Nonlinear thermoelastic equilibrium equations are derived using the Hellinger–Reissner variational principle, in which five different coupling cases for thermal–mechanical loads can be fully involved. Numerical examples demonstrate that the proposed method with CSSH8 element is insensitive to various distorted meshes and numerically robust to pass the buckling point; meanwhile large step sizes can be achieved in the path-following nonlinear thermoelastic analysis. • A hybrid-stress solid-shell element is developed for nonlinear thermoelastic analysis of structures. • The modified generalized laminate constitutive model is extended to consider thermal effects. • Nonlinear thermoelastic equilibrium equations are derived for five thermal–mechanical cases. • The method is fully tested using various examples compared with displacement based FE methods. [ABSTRACT FROM AUTHOR]

This is a study on the development of a novel multi-material topology optimization scheme considering temperature-dependent thermoelastic properties for engineering structure design. Two cases, a three-point-bending beam under a uniform temperature field and a cantilever beam under a non-uniform temperature field, are investigated for the effects of thermoelastic properties on topology optimization. The proposed optimization scheme is compared with two existing topology optimization approaches: conventional topology optimization and thermoelastic topology optimization. The results show that the temperature-dependent elastic modulus dominantly influences the design optimization outcomes, in terms of material distribution, structural shape and compliance, while the temperature-dependent thermal expansion coefficient has a much more crucial impact on determining the material distribution and structural geometry than on compliance. Taken together, the findings demonstrate that the developed topology optimization scheme can be used to design thermally sensitive multi-materials in industrial applications, e.g. aerospace structures under high temperature and polymers in additive manufacturing. [ABSTRACT FROM AUTHOR]

This paper presents a nonlinear thermo-elastoplastic bending analysis of temperature-dependent functionally graded (FG) plates exposed to a combination of mechanical and thermal loads using an efficient three-dimensional (3D) truly meshless approach based on the local radial point interpolation method (LRPIM). In this model, while using a new radial basis function (RBF), it is well shown that the quality of the LRPIM shape functions is not affected by the shape parameter. The modified rule of mixtures is employed to locally evaluate the effective temperature-dependent parameters of the functionally graded material. To describe the plastic behavior of the FG plate, the von Mises yield criterion, isotropic strain hardening, and the Prandtl-Reuss flow rule are adapted. To demonstrate the high capability and efficiency of the present method, the current results are compared with other existing numerical and analytical results, which shows an excellent agreement. The effect of significant parameters such as material gradient, ceramic volume fraction, plate thickness-to-length ratio, and boundary conditions on the nonlinear bending response of FG plates has also been investigated. [ABSTRACT FROM AUTHOR]

In this study, nonlinear transient thermo-elastic analysis for a thick hollow 1D-FGM (functionally graded material) axisymmetric cylinder with finite length is investigated using higher-order graded finite element method. The material property gradations are along the radial direction and the power-law volume fraction and simple rule of mixture scheme are utilized to perform the effective material properties. As the cylinder exposed to high temperature, the temperature dependency of material properties is considered. So it led to nonlinear thermal conduction equation and in spite of the material distribution along one-direction by changing the temperature, the material properties are varied along two-direction with time. The nonlinear heat equation leads to 2D-temperature distribution for an axisymmetric cylinder. Also the thermal stress field would be different from an infinite cylinder which has been studied before. The temperatures, displacements and stresses for different values of volume fraction exponents along radial direction are investigated. It is revealed that the stresses and temperature in FGM cylinder are lower than the ceramic rich one. In other words, functionally graded cylinder wall gives better results in both stress and temperature cases than non-FGM cylinder. [ABSTRACT FROM AUTHOR]

In this research, by using isogeometric analysis (IGA) method, nonlinear thermal buckling analysis of porous circular and annular microplates reinforced by graphene platelets (GPLs) under uniform temperature rise is performed by taking both the temperature dependence of the material properties and the size effects into account. The closed-cell metal foam scheme combined with the Halpin-Tsai micromechanics model and the rule of mixture is utilized to identify the effective material properties of the porous nanocomposites for three GPL dispersion patterns and three porosity distributions. With the aid of the virtual work principle, the classical and the non-classical motion equilibrium formulation based on the higher-order shear deformation theory in conjunction with the modified strain gradient (MSG) theory for the nonlinear temperature-dependent buckling behaviour are established. The higher-order NURBS basis functions capable of accomplishing easily the smoothness of arbitrary continuity order are successfully utilized to solve the nonlinear governing equations by satisfying the C 2 -continuity of the displacement field required by the MSG theory. The thermal buckling behaviour is assessed in detail by using various parameters such as the thickness-to-radius ratio, the porosity coefficient, the GPL weight fraction and the material length scale as well as the porosity distribution scheme and the GPL dispersion pattern. The results show the significance of incorporating the temperature dependency of the material properties when analyzing the thermal buckling behaviour and present the combination scheme of porosity and GPL distributions for enhancing the thermal buckling resistance. • Thermal buckling of temperature-dependent porous GPL-reinforced microplate is analyzed. • Numerical solution method capable of taking the size effects into account is proposed. • The significance of incorporating the temperature dependency is confirmed. • The microplate composition scheme for enhancing thermal buckling resistance is presented. • The new findings are certain to be served as the benchmark solution. [ABSTRACT FROM AUTHOR]

• Plates with temperature-dependent material properties are studied. • A slice model is built for discretization. • An iteration algorithm is developed to obtain the temperature distribution. • The 3-D thermoelasticity theory is applied in the analysis. • Effects of surface temperature and layer thickness ratio on the plates are studied. The analytical solutions are presented for the distributions of temperature, displacements, and stresses in simply-supported layered rectangular plates under thermo-mechanical loads. The material properties of every layer are temperature-dependent. A slice model is presented for discretization: dividing every layer into finite thin slices, the material properties within each slice are assumed to be uniform. The temperature varies along the thickness and follows the one-dimensional (1-D) heat conduction equations. An iterative algorithm is proposed for the prediction of the 1-D temperature field. Then, the exact three-dimensional (3-D) thermoelasticity theory and the transfer matrix technique are applied for the prediction of the displacement and stress fields in the plate. The influences of temperature can be divided into two parts: producing thermal deformations and thermal stresses and affecting the deformations and stresses induced by mechanical loads. Finally, the influences of the surface temperature and the layer thickness ratio on the thermo-mechanical responses of a sandwich plate are studied in detail. Image, graphical abstract [ABSTRACT FROM AUTHOR]

In this study, the thermal buckling and postbuckling of functionally graded (FG) nanocomposite annular sector plates reinforced by carbon nanotubes (CNTs) are numerically analyzed. The effective material properties of FG nanocomposite are temperature-dependent (TD) and evaluated via the modified micromechanical method and rule of mixture. Based on the higher-order shear deformation theory (HSDT) and using the principle of virtual work and variational differential quadrature (VDQ) approach, the unified weak form of discretized nonlinear governing equilibrium equations is derived. Then, by using the linear part of equations and solving the derived eigenvalue problem, the critical temperature rise and associated mode shapes are obtained, which are used as the initial guess in solving the nonlinear thermal postbuckling problem. The pseudo-arc-length method and an iterative solver are employed to obtain the nonlinear thermal postbuckling equilibrium path of the FG nanocomposite annular sector plates. The influences of geometrical parameters, boundary conditions (BCs), CNT volume fraction, and CNT distribution pattern on the critical temperature rise and thermal postbuckling behavior of the FG nanocomposite annular sector plates are evaluated and discussed. Also, comparisons are made between the results considering the TD and temperature-independent (TID) properties. It is demonstrated that for higher values of sector angle, the effect of sector angle on the critical temperature rise and thermal postbuckling path is negligible. Moreover, by increasing the sector angle, the effect of BCs of straight edges vanishes, and the critical temperature rise and thermal postbuckling curves of for BCs of CSCS and SCSC approach those for CCCC and SSSS ones. [ABSTRACT FROM AUTHOR]

This study focuses on the thermoelastic behavior of simply supported thick beams with temperature-dependent material properties under thermomechanical loads. The heat conduction analysis is based on the one-dimensional Fourier's law, and the displacement and stress analysis is based on the two-dimensional thermoelasticity theory. The solution of temperature field across the thickness is obtained. By dividing the beam into a series of thin slices, the temperature and the material properties in each slice are considered to be uniform. The state space method is used to give the displacements and stresses for every slice. The transfer-matrix method is used to give the displacements and stresses for the beam. Finally, an example is conducted to analyze the temperature, displacement, and stress fields in a carbon steel beam. The example reveals that the temperature not only produces displacements and stresses itself but also affects the displacements and stresses induced by the mechanical load. [ABSTRACT FROM AUTHOR]

• Dynamic model of shaft-disk rotors in axial non-uniform temperature field is developed. • Three-dimensional displacement fields for both shaft and disk are considered. • Temperature-dependent material properties are considered. • Present model can effectively predict vibrations of shaft-disk rotors in axial non-uniform temperature field. • Effect of non-uniform temperature field is related to the rotational speed and disk location. Research on vibrations of shaft-disk rotors in non-uniform thermal field is essential for the design of rotating machinery. In this paper, the dynamic model of axially loaded thin-walled shaft-disk rotors in axial non-uniform temperature field is developed, considering three-dimensional displacement fields of the shaft and disk. This model introduces the temperature-dependent properties of materials, and gyroscopic and centrifugal effects. Based on the Euler-Bernoulli beam theory and the Kirchhoff plate theory, Lagrange's equation is used to derive the differential equations of motion. By comparing with the results of the existing reference and finite element results, the accuracy of the present model is verified. The effects of the axial displacement of shaft, temperature-dependent material property, temperature difference, temperature distribution, disk position and axial preload on the free vibration of shaft-disk rotors are discussed. Results show that the present model can effectively predict free vibrations of shaft-disk rotors in axial non-uniform temperature field. The effect of thermal field on vibrations of shaft-disk rotors is affected by the rotational speed and disk location as well. [ABSTRACT FROM AUTHOR]

This article investigates the nonlinear stability of eccentrically stiffened moderately thick plates made of functionally graded materials (FGM) subjected to in-plane compressive, thermo-mechanical loads. The equilibrium and compatibility equations for the moderately thick plates are derived by using the first-order shear deformation theory of plates, taking into account both the geometrical nonlinearity in the von Karman sense and initial geometrical imperfections, temperature-dependent properties with Pasternak type elastic foundations. By applying the Galerkin method and using a stress function, the effects of material and geometrical properties, temperature-dependent material properties, elastic foundations, boundary conditions, and eccentric stiffeners on the buckling and post-buckling loading capacity of the eccentrically stiffened moderately thick FGM plates in thermal environments are analyzed and discussed.

Vibration and buckling analysis of a magneto-electro-elastic sandwich Timoshenko beam with a porous core and poly-vinylidene fluoride (PVDF) matrix reinforced by carbon nanotubes (CNTs) is considered as face layers and material properties of CNTs and PVDF are assumed to be temperature-dependent. Different CNT distribution patterns including uniform distribution, AV (which top and bottom face sheets have functionally graded-A (FG-A) and functionally graded-V (FG-V) CNT distribution patterns, respectively) and VA patterns are employed. The governing equations of motion are derived based on Timoshenko beam theory, and Navier's solution is used to solve these equations. The sandwich beam resting on a Pasternak foundation and face layers are subjected to electric and magnetic potentials. The effect of different parameters such as porosity coefficient, electric and magnetic potential, parameters of foundation, and geometrical parameters are investigated on vibration and buckling behavior of the sandwich beam. Numerical results of this paper show that porosity distribution has a significant effect on the stiffness of the sandwich beam. The results can be used for future analysis of magneto-electro-mechanical sandwich systems as actuators and sensors. [ABSTRACT FROM AUTHOR]

Thermal postbuckling analysis is presented for graphene-reinforced composite (GRC) laminated cylindrical shells under a uniform temperature field. The GRC layers are arranged in a functionally graded (FG) graphene reinforcement pattern by varying the graphene volume fraction in each GRC layer. The GRCs possess temperature dependent and anisotropic material properties and the extended Halpin-Tsai model is employed to evaluate the GRC material properties. The governing equations are based on a higher order shear deformation shell theory and include the von Kármán-type kinematic nonlinearity and the thermal effects. A singular perturbation method in conjunction with a two-step perturbation approach is applied to determine the thermal postbuckling equilibrium path for a GRC shell with or without geometric imperfection. An iterative scheme is developed to obtain numerical thermal buckling temperatures and thermal postbuckling load-deflection curves for the shells. The results reveal that the FG-X piece-wise FG graphene distribution can enhance the thermal postbuckling capacity of the shells when the shells are subjected to a uniform temperature loading. [ABSTRACT FROM AUTHOR]

In this article, based on high-order sandwich panel theory and modified strain gradient theory, free vibration analysis of a micro-magneto-electro-elastic sandwich panel with a transversely flexible core and functionally graded carbon nanotube–reinforced nanocomposite face sheets is investigated. Also, the influences of temperature-dependent material properties and various circuit boundary conditions such as open and closed are considered in this study. Carbon nanotubes are arranged in longitudinal direction inside polyvinylidene fluoride matrix with various functionally graded (FG) distributions such as uniform, FG-V, FG-A, FG-X, and FG-O in the face sheets. The generalized rule of mixture is employed to predict mechanical, electrical, magnetic, and thermal properties of micro-sandwich composite panel. The classical shell theory and an elasticity high-order theory are used for the face sheets and the core, respectively. Then, the governing equations of motion are derived using Hamilton’s principle. In this article, the influences of the volume fraction, the various distributions of carbon nanotubes, the multi-physical fields, open- and closed-circuit boundary conditions, the material length scale parameters, different face sheet and core thicknesses, and temperature changes on the natural frequency are investigated, and the obtained results show that these influences play an important role in the natural frequencies and can be used in order to prevent the resonance phenomenon and also for manufacturing process design and optimization of micro-magneto-electro-elastic composite sandwich cylindrical panels. [ABSTRACT FROM AUTHOR]

In this paper, we study the nonlinear dynamic response of higher order shear deformable sandwich functionally graded circular cylindrical shells with outer surface-bonded piezoelectric actuator on elastic foundations subjected to thermo-electro-mechanical and damping loads. The sigmoid functionally graded material shells are made of the metal–ceramic–metal layers with temperature-dependent material properties. The governing equations are established based on Reddy’s third-order shear deformation theory using the stress function, the Galerkin method and the fourth-order Runge–Kutta method. Numerical results are given to demonstrate the influence of geometrical parameters, material properties, imperfection, elastic foundations, and thermo-electro-mechanical and damping loads on the nonlinear dynamic response of the shells. Accuracy of the present formulation is shown by comparing the results of numerical examples with the ones available in literature. [ABSTRACT FROM AUTHOR]

Assessing the stability of steel building frames exposed to fire conditions is challenging because of the need to consider the elevated temperature properties of steel, nonuniform heating of structural members, and large deformational demands on the frames. This challenge is further intensified if the stability of the frame is also influenced by the lateral forces of an earthquake that preceded the fire. Although there has been significant progress recently in simulating the response of frames using finite-element methods, there is a need for computationally efficient tools that would minimize the modeling effort and allow for accurate and rapid assessment so that a large number of simulations can be conducted. To this end, the present study aims to develop a framework for conducting a stability analysis of steel columns subjected to demands imposed by lateral loading followed by fire. A nonlinear formulation is proposed to assess the stability of W-shaped steel columns under multihazard loading scenarios. Results from the proposed formulation show good agreement with available strength design equations of steel columns at ambient and elevated temperatures. This computationally efficient tool can be used to investigate the effects of a wide variety of variables on the stability of steel columns subjected to fire and fire following earthquakes. [ABSTRACT FROM AUTHOR]

• The thermal damage evolution of auxetic H-SS is assessed comprehensively. • The auxetic property can increase the fatigue life of the structure. • The fatigue life will be underestimated if the TDMPs are neglected. • Interfacial damage is more likely to occur when ω < 0.2. A general model to evaluate the interfacial thermal damage and predict the fatigue life of the auxetic honeycomb-substrate structure (H-SS) is built. To improve the accuracy, all material parameters in the model are temperature-dependent. The transient temperature field and the associated thermal stresses associated with the temperature changes in the structure are determined by the finite difference method. The interfacial thermal stress intensity factor is employed to characterize the stress concentration behavior. Based on the stress field and the stress concentrations at the interface, interfacial thermal damage evolution and fatigue life prediction of the structure are made. The results show that the auxetic property can significantly enhance the fatigue life of the structure. The fatigue life will be undervalued when the effect of temperature-dependent material properties (TDMPs) is neglected. Furthermore, the influence of TDMPs on the fatigue life of the structure will increase as the absolute value of the internal cell angle increases. This paper provides a comprehensive assessment of the thermal damage and fatigue life of auxetic H-SSs and can serve as a solid theoretical foundation for future applications of related structures in extreme temperature environments. [ABSTRACT FROM AUTHOR]

About 40% of reactors in the world are being operated beyond design life or are approaching the end of their life cycle. During long-term operation, various degradation mechanisms occur. Fatigue caused by alternating operational stresses in terms of temperature or pressure change is an important damage mechanism in continued operation of nuclear power plants. To monitor the fatigue damage of components, Fatigue Monitoring System (FMS) has been installed. Most FMSs have used Green's Function Approach (GFA) to calculate the thermal stresses rapidly. However, if temperature-dependent material properties are used in a detailed FEM, there is a maximum peak stress discrepancy between a conventional GFA and a detailed FEM because constant material properties are used in a conventional method. Therefore, if a conventional method is used in the fatigue evaluation, thermal stresses for various operating cycles may be calculated incorrectly and it may lead to an unreliable estimation. So, in this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using an artificial neural network and weight factor. To verify the proposed method, thermal stresses by the new method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed.

Elastoplastic analysis of a composite cylinder, consisting of an isotropic elastic inclusion surrounded by orthotropic matrix, is conducted via numerical parametric studies for examining its residual stress under thermal cycles. The matrix is assumed to be elastically and plastically orthotropic, and all of its material properties are temperature-dependent (TD). The Hill’s anisotropic plasticity material model is adopted. The interface between the inclusion and matrix is perfectly bonded, and the outer boundary of the cylinder is fully constrained. A quasi-static, uniform temperature field is applied to the cylinder, which is analyzed under the plane-strain assumption. The mechanical responses of the composite cylinder are strongly affected by the material symmetry and temperature-dependent material properties. When the temperature-independent material properties are assumed, larger internal stresses at the loading phase are predicted. Furthermore, considering only yield stress being temperature dependent may be insufficient since other TD material parameters may also affect the stress distributions. In addition, plastic orthotropy inducing preferential yielding along certain directions leads to complex residual stress distributions when material properties are temperature-dependent.

Based on the three-dimensional elasticity theory, the transient thermal residual stress analyses of one-dimensional functionally graded rectangular plates (FGPs) have been performed under in-plane constant heat flux for different compositional gradient exponents. The thermo-mechanical properties of FGPs were assumed to be vary with a power law along an in-plane direction, not through the plate thickness direction and temperature-dependent/independent. The Heat Transfer and Navier's Equations in cartesian coordinates which represent the two-dimensional thermoelastic problem were resolved by means of the Finite-Difference Method (FDM), and the set of linear equations were solved using the pseudo singular value method. The effect of the coordinate derivatives of material properties were considered in both Heat Transfer and Navier's Equations. The current study aims at determining the effect of temperature dependence and temperature independence of material properties and the compositional gradient exponents in FGPs on the levels of temperature, strain and stress. The FGPs with temperature-dependent material properties showed higher levels of temperature, strain and stress than those with temperature-independent material properties. In order to verify the results of this study, two-dimensional thermo-elastic problem was resolved using the Finite Element Method (FEM) and the results are compared. [ABSTRACT FROM AUTHOR]

In this paper, a nonlinear static thermoelastic analysis of a spherical shell made of functionally graded material is performed. The material properties are assumed to be functions of both radial coordinate of the sphere and temperature. The dependence on temperature makes the governing equations nonlinear. The so-obtained nonlinear heat conduction equation is analytically solved using the perturbation technique. The approximate temperature field is then supplied to elasticity equations which are solved exactly for the case of incompressible elastic material to get displacement and stress distributions. Finally, the temperature field, material properties and radial stress versus the radial direction are shown and discussed. [ABSTRACT FROM AUTHOR]

Based on Reddy’s third-order shear deformation plate theory, the nonlinear dynamic response and vibration of imperfect functionally graded carbon nanotube-reinforced composite (FG-CNTRC) plates on elastic foundations subjected to dynamic loads and temperature are presented. The plates are reinforced by single-walled carbon nanotubes which vary according to the linear functions of the plate thickness. The plate’s effective material properties are assumed to depend on temperature and estimated through the rule of mixture. By applying the Airy stress function, Galerkin method and fourth-order Runge–Kutta method, nonlinear dynamic response and natural frequency for imperfect FG-CNTRC plates are determined. In numerical results, the influences of geometrical parameters, elastic foundations, initial imperfection, dynamic loads, temperature increment, and nanotube volume fraction on the nonlinear vibration of FG-CNTRC plates are investigated. The obtained results are validated by comparing with those of other authors. [ABSTRACT FROM PUBLISHER]

In this study, based on Reddy cylindrical double-shell theory, the free vibration and stability analyses of double-bonded micro composite sandwich cylindrical shells reinforced by carbon nanotubes conveying fluid flow under magneto-thermo-mechanical loadings using modified couple stress theory are investigated. It is assumed that the cylindrical shells with foam core rested in an orthotropic elastic medium and the face sheets are made of composites with temperature-dependent material properties. Also, the Lorentz functions are applied to simulation of magnetic field in the thickness direction of each face sheets. Then, the governing equations of motions are obtained using Hamilton's principle. Moreover, the generalized differential quadrature method is used to discretize the equations of motions and solve them. There are a good agreement between the obtained results from this method and the previous studies. Numerical results are presented to predict the effects of size-dependent length scale parameter, third order shear deformation theory, magnetic intensity, length-to-radius and thickness ratios, Knudsen number, orthotropic foundation, temperature changes and carbon nanotubes volume fraction on the natural frequencies and critical flow velocity of cylindrical shells. Also, it is demonstrated that the magnetic intensity, temperature changes and carbon nanotubes volume fraction have important effects on the behavior of micro composite sandwich cylindrical shells. So that, increasing the magnetic intensity, volume fraction and Winkler spring constant lead to increase the dimensionless natural frequency and stability of micro shells, while this parameter reduce by increasing the temperature changes. It is noted that sandwich structures conveying fluid flow are used as sensors and actuators in smart devices and aerospace industries. Moreover, carotid arteries play an important role to high blood rate control that they have a similar structure with flow conveying cylindrical shells. In fact, the present study can be provided a valuable background for more research and further experimental investigation. [ABSTRACT FROM AUTHOR]

The nonlinear dynamics of an eccentrically stiffened functionally graded material (ES-FGM) plates resting on the elastic Pasternak foundations subjected to mechanical and thermal loads is considered in this article. The plates are reinforced by outside stiffeners with temperature-dependent material properties in two cases: uniform temperature rise and through the thickness temperature gradient. Both stiffeners and plate are deformed under temperature. Using Reddy’s third-order shear deformation plate theory, stress function, Galerkin and fourth-order Runge–Kutta methods, the effects of material and geometrical properties, temperature-dependent material properties, elastic foundations, and stiffeners on the nonlinear dynamic response of the ES-FGM plate in thermal environments are studied and discussed. Some obtained results are validated by comparing with those in the literature. [ABSTRACT FROM PUBLISHER]

This article investigates the nonlinear stability of eccentrically stiffened moderately thick plates made of functionally graded materials (FGM) subjected to inplane compressive, thermo-mechanical loads. The equilibrium and compatibility equations for the moderately thick plates are derived by using the first-order shear deformation theory of plates, taking into account both the geometrical nonlinearity in the von Karman sense and initial geometrical imperfections, temperaturedependent properties with Pasternak type elastic foundations. By applying the Galerkin method and using a stress function, the effects of material and geometrical properties, temperature-dependent material properties, elastic foundations, boundary conditions, and eccentric stiffeners on the buckling and post-buckling loading capacity of the eccentrically stiffened moderately thick FGM plates in thermal environments are analyzed and discussed. [ABSTRACT FROM AUTHOR]

In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material, the formation and expansion of the plasma plume, and interaction of the plasma plume with the incoming laser. Temperature dependent optical and thermophysical properties are also considered in the model due to the properties of the target will change over a wide range during the ultra-short pulsed laser ablation process. The results show that the plasma shielding has a great influence on the process of ultra-short pulsed laser ablation, especially at higher laser fluence. The non-Fourier effect has a great influence on the temperature characteristics and ablation depth of the target. The ultra-short pulsed laser ablation can effectively reduce the heat affected zone compared to nanosecond pulsed laser ablation. The comparison between the simulation results and the experimental results in the literature shows that the model with the plasma shielding and the non-Fourier effect can simulate the ultra-short pulsed laser ablation process better.

The authors of this article investigate the nonlinear stability of axisymmetric functionally graded annular spherical shells with temperature-dependent material properties subjected to thermo-mechanical loads and resting on elastic foundations. Equilibrium and compatibility equations are derived by using the classical thin shell theory in terms of the shell deflection and the stress function. Approximate analytical solutions are assumed to satisfy simply supported boundary conditions and Galerkin method is applied to obtain the closed-form of load–deflection paths. An analysis is carried out to show the effects of material and geometrical properties and combination of loads on the stability of the shells. [ABSTRACT FROM PUBLISHER]

This work presents an analysis of the thermo-mechanical behavior of rotating discs made of functionally graded material (FGM) with variable thickness. The solutions are obtained by variable material property (VMP) theory. In this theory, the domain is divided into some finite sub-domains in the radial direction, in which the thermo-mechanical properties are assumed to be constant and the form of the elastic response is used to solve elastic–plastic problems. The results obtained by the VMP method are then compared with the results obtained by the finite element analysis using ANSYS software. In addition, the unloading and reverse yielding behavior of FG rotating disk are investigated and the residual stresses are then calculated with the same values of pressure and temperature by VMP theory and FE analysis. The results reveal that the mentioned methods are in very good agreement in both elastic and elasto-plastic states. Also, the effect of considering the temperature-dependent material properties is discussed. It is found that the results obtained by ignoring the temperature-dependent material properties lead to high discrepancies in comparison with those by considering that. Subsequently, the effect of various parameters including the disk geometry, temperature distribution, and boundary conditions on the stress behavior of disk is investigated. The results show that unlike the uniform rotating discs in which the yielding necessarily initiates from the inner radius, in the FG rotating discs, plasticity can be initiated from any point. [ABSTRACT FROM AUTHOR]

Mixed-mode thermal fracture of cracked AISI 304 austenitic stainless steel layers under severe thermal gradients of cryogenic and elevated temperatures is studied. Taking into account the variation of thermo-mechanical properties with temperature, the Jk-integral method, incorporating temperature-dependent material properties, is used to determine mixed-mode stress intensity factors from the results of finite element (FE) analysis. Effects of the convection heat transfer coefficient and the temperature of the contacting fluid on the mixed-mode fracture of the steel layers are investigated and it is shown that the mixed-mode stress intensity factors increase nonlinearly with these parameters. Results indicate that for accurate determination of crack tip fracture parameters when severe thermal gradients are present in the material, it is necessary to consider the variation of thermo-mechanical properties with temperature. [ABSTRACT FROM AUTHOR]

The paper presents a theoretical formulation for the computation of temperature-dependent nonlinear response of shallow shells with single and double curvatures subjected to transverse mechanical loads while being exposed to through-depth non-uniform heating regimes such as those resulting from a fire. The material nonlinearity arises from taking into consideration the degradation of the material elastic behaviour at elevated temperatures under quasi-static conditions. Two types of boundary conditions are considered, both of which constrain the transverse deflections and allow the rotations about the edge axis to be free. One of the boundary conditions permits lateral translation (laterally unrestrained) and the other one does not (laterally restrained). A number of examples are solved for shallow shells under different types of loading conditions including: an exponential “short hot” fire leading to a high temperature over a relatively short duration; and an exponential “long cool” fire of lower temperature over a longer duration. The limits of the shallow shell equations are investigated through comparison studies. Results show that while current numerical approaches for analysis of laterally restrained shallow shells are often computationally intensive, the proposed approach offers an adequate level of accuracy with a rapid convergence rate for such structures. [ABSTRACT FROM AUTHOR]

The performance of a thermoelectric power generation (TEPG) module and a device designed to convert engine exhaust heat directly into electricity was studied under different operating conditions using a proposed thermoelectric (TE) model in this work. The proposed model was obtained from the first law of thermodynamics, Ohm’s law, nonlinear analytical solution of thermoelectric transport equation, and a control volume that represents a typical TEPG module or device such that the temperature-dependent material properties of, the spatial-dependent heat flow rate through the TE element, and the interfacial electrical and thermal losses can be taken into account in the performance calculation. The performance of a typical TEPG module under a broad range of cold-side temperatures and the temperature differences between its hot-side and cold-side was calculated by the proposed model and the results agree very well with the existing model predictions. Comparison between the model predictions and the experimental results confirmed that reducing the interfacial electric resistance can enhance the module performance. The inter-dependence of the key thermal and TEPG system design and optimization parameters was examined for a real TEPG device using the proposed model and an optimal module fill factor of 0.35 was found within the given mass flow rates between 0.0154 and 0.052 kg/s of exhaust stream. [ABSTRACT FROM AUTHOR]