Search

Background and aims: The impact of endothelial shear stress (ESS) on vessel remodeling in vessels implanted with bioresorbable scaffold (BRS) as compared to metallic drug-eluting stent (DES) remains elusive. The aim of this study was to determine whether the relationship between ESS and remodeling patterns differs in BRS from those seen in metallic DES at 3-year follow-up. Methods: In the ABSORB II randomized trial, lesions were investigated by serial coronary angiography and intravascular ultrasound (IVUS). Three-dimensional reconstructions of coronary arteries post-procedure and at 3 years were performed. ESS was quantified using non-Newtonian steady flow simulation. IVUS cross-sections in device segment were matched using identical landmarks. Results: Paired ESS calculations post-procedure and at 3 years were feasible in 57 lesions in 56 patients. Postprocedure, median ESS at frame level was higher in BRS than in DES, with marginal statistical significance (0.97 ± 0.48 vs. 0.75 ± 0.39 Pa, p = 0.063). In the BRS arm, vessel area and lumen area showed larger increases in the highest tercile of median ESS post-procedure as compared to the lowest tercile. In contrast, in DES, no significant relationship between median ESS post-procedure and remodeling was observed. In multivariate analysis, smaller vessel area, larger lumen area, higher plaque burden post-procedure, and higher median ESS post-procedure were independently associated with expansive remodeling in matched frames. Only in BRS, younger age was an additional significant predictor of expansive remodeling. Conclusions: In a subset of lesions with large plaque burden, shear stress could be associated with expansive remodeling and late lumen enlargement in BRS, while ESS had no impact on vessel dimension in metallic DES.

AIMS: Scaffold design and plaque characteristics influence implantation outcomes and local flow dynamics in treated coronary segments. Our aim is to assess the impact of strut embedment/protrusion of bioresorbable scaffold on local shear stress distribution in different atherosclerotic plaque types. METHODS AND RESULTS: Fifteen Absorb everolimus-eluting Bioresorbable Vascular Scaffolds were implanted in human epicardial coronary arteries. Optical coherence tomography (OCT) was performed post-scaffold implantation and strut embedment/protrusion were analysed using a dedicated software. OCT data were fused with angiography to reconstruct 3D coronary anatomy. Blood flow simulation was performed and wall shear stress (WSS) was estimated in each scaffolded surface and the relationship between strut embedment/protrusion and WSS was evaluated. There were 9083 struts analysed. Ninety-seven percent of the struts (n = 8840) were well-apposed and 243 (3%) were malapposed. At cross-section level (n = 1289), strut embedment was significantly increased in fibroatheromatous plaques (76 ± 48 µm) and decreased in fibrocalcific plaques (35 ± 52 µm). Compatible with strut embedment, WSS was significantly higher in lipid-rich fibroatheromatous plaques (1.50 ± 0.81 Pa), whereas significantly decreased in fibrocalcified plaques (1.05 ± 0.91 Pa). After categorization of WSS as low (<1.0 Pa) and normal/high WSS (≥1.0 Pa), the percent of low WSS in the plaque subgroups were 30.1%, 31.1%, 25.4%, and 36.2% for non-diseased vessel wall, fibrous plaque, fibroatheromatous plaque, and fibrocalcific plaque, respectively (P-overall < 0.001). CONCLUSION: The composition of the underlying plaque influences strut embedment which seems to have effect on WSS. The struts deeply embedded in lipid-rich fibroatheromas plaques resulted in higher WSS compared with the other plaque types.

Contains fulltext : 203043.pdf (publisher's version ) (Open Access)

Item does not contain fulltext, BACKGROUND: To date, no specific drug-eluting stent (DES) has fully proven its superiority over others in patients with ST-segment elevation myocardial infarction (STEMI) undergoing percutaneous coronary intervention. OBJECTIVES: The purpose of this study was to compare the safety and efficacy of coronary artery stents in STEMI patients in a patient-level network meta-analysis. METHODS: Eligible studies were dedicated randomized controlled trials comparing different stents in STEMI patients undergoing percutaneous coronary intervention with at least 12 months of clinical follow-up. Of 19 studies identified from the published data, individual patient data were collected in 15 studies with 10,979 patients representing 87.7% of patients in the overall network of evidence. The primary endpoint was the composite of cardiac death, reinfarction, or target lesion revascularization. RESULTS: Overall, 8,487 (77.3%) of 10,979 STEMI patients were male and the mean age was 60.7 years. At a median follow-up of 3 years, compared with bare-metal stents (BMS), patients treated with paclitaxel-, sirolimus-, everolimus-, or biolimus-eluting stents had a significantly lower risk of the primary endpoint (adjusted hazard ratios [HRs]: 0.74 [95% confidence interval (CI): 0.63 to 0.88], 0.65 [95% CI: 0.49 to 0.85], 0.70 [95% CI: 0.53 to 0.91], and 0.66 [95% CI: 0.49 to 0.88], respectively). The risk of primary endpoint was not different between patients treated with BMS and zotarolimus-eluting stents (adjusted HR: 0.83 [95% CI: 0.51 to 1.38]). Among patients treated with DES, no significant difference in the risk of the primary outcome was demonstrated. Treatment with second-generation DES was associated with significantly lower risk of definite or probable stent thrombosis compared with BMS (adjusted HR: 0.61 [95% CI: 0.42 to 0.89]) and first-generation DES (adjusted HR: 0.56 [95% CI: 0.36 to 0.88]). CONCLUSIONS: In STEMI patients, DES were superior to BMS with respect to long-term effica

Background: Association of premature ventricular complexes (PVC) with left ventricular systolic dysfunction (LVSD) and efficacy of catheter ablation treatment have been demonstrated in studies. The role of left atrial (LA) mechanics in the etiopathogenesis of PVC-induced cardiomyopathy (PVC-CMP) as well as changes in LA mechanics with catheter ablation have not been studied before. Methods: A total number of 61 patients (Mean Age 43 ± 3) with idiopathic outflow tract (OT) PVCs undergoing radiofrequency catheter ablation (RFCA) were enrolled. ECG, 24 h Holter, and echocardiographic evaluation with left ventricular (LV) diastolic functions and LA volumetric assessments were performed before and three months after RFCA. Results: Along with a marginal increase in left ventricle ejection fraction (LVEF), improvement in diastolic functions and left atrial mechanics were observed in the study (LVEF 53 ± 7 versus 57 ± 6, p < 0.01) in short-term follow-up. The frequency of LV diastolic dysfunction (LVDD) decreased with catheter ablation (n = 5 to 0, p = 0.02). The overall LA function improved. Left atrium passive and overall emptying fraction (LAEF) increased significantly (0.32 ± 0.04 to 0.41 ± 0.04, p < 0.05 and 0.62 ± 0.04 to 0.65 ± 0.004, p < 0.05, respectively). Active LAEF decreased significantly (0.29 ± 0.005 to 0.24 ± 0.006, p < 0.05). Conclusions: The results of this study are indicative of "PVC-induced atriomyopathy" which responds to RFCA in short-term follow-up. Atrial dysfunction might play a role in symptoms and etiopathogenesis of LVSD.

Optical coherence tomography based computational flow dynamic (CFD) modeling provides detailed information about the local flow behavior in stented/scaffolded vessel segments. Our aim is to investigate the in-vivo effect of strut thickness and strut protrusion on endothelial wall shear stress (ESS) distribution in ArterioSorb Absorbable Drug-Eluting Scaffold (ArterioSorb) and Absorb everolimus-eluting Bioresorbable Vascular Scaffold (Absorb) devices that struts with similar morphology (quadratic structure) but different thickness. In three animals, six coronary arteries were treated with ArterioSorb. At different six animals, six coronary arteries were treated with Absorb. Following three-dimensional(3D) reconstruction of the coronary arteries, Newtonian steady flow simulation was performed and the ESS were estimated. Mixed effects models were used to compare ESS distribution in the two devices. There were 4591 struts in the analyzed 477 cross-sections in Absorb (strut thickness = 157 µm) and 3105 struts in 429 cross-sections in ArterioSorb (strut thickness = 95 µm) for the protrusion analysis. In cross-section level analysis, there was significant difference between the scaffolds in the protrusion distances. The protrusion was higher in Absorb (97% of the strut thickness) than in ArterioSorb (88% of the strut thickness). ESS was significantly higher in ArterioSorb (1.52 ± 0.34 Pa) than in Absorb (0.73 ± 2.19 Pa) (p = 0.001). Low- and very-low ESS data were seen more often in Absorb than in ArterioSorb. ArterioSorb is associated with a more favorable ESS distribution compared to the Absorb. These differences should be attributed to different strut thickness/strut protrusion that has significant effect on shear stress distribution.

Aims As a sine qua non for arterial wall physiology, local hemodynamic forces such as endothelial shear stress (ESS) may influence long-term vessel changes as bioabsorbable scaffolds dissolve. The aim of this study was to perform serial computational fluid dynamic (CFD) simulations to examine immediate and long-term haemodynamic and vascular changes following bioresorbable scaffold placement. Methods and results Coronary arterial models with long-term serial assessment (baseline and 5 years) were reconstructed through fusion of intravascular optical coherence tomography and angiography. Pulsatile non-Newtonian CFD simulations were performed to cal

The percutaneous coronary intervention has undergone rapid evolution over the last 40 years and has become one of the most widely performed medical procedures. The introduction of intracoronary stents improved the safety and efficacy of percutaneous coronary intervention. But with the advent of stenting, a new potentially fatal enemy emerged: stent thrombosis. Ever since, adjunct pharmacological therapy, stent technique and technology have been adjusted to reduce the risk of stent thrombosis. The aim of the present article is to provide an overview of past, present and future aspects of percutaneous intervention in relation to stent thrombosis.

Item does not contain fulltext, OBJECTIVES: The aim of this study was to assess calcium growth with fused grayscale intravascular ultrasound (IVUS), IVUS-virtual histology, and optical coherence tomography (OCT) from baseline to 5-year follow-up in patients treated with bioresorbable vascular scaffolds. BACKGROUND: IVUS and OCT have individual strengths in assessing plaque composition and volume. Fusion of images obtained using these methods could potentially aid in coronary plaque assessment. METHODS: Anatomic landmarks and endoluminal radiopaque markers were used to fuse OCT and IVUS images and match baseline and follow-up. RESULTS: Seventy-two IVUS-virtual histology and OCT paired matched cross-sectional in- and out-scaffold segments were fused at baseline and follow-up. In total, 46 calcified plaques at follow-up were detected using the fusion method (33 in-scaffold, 13 out-scaffold), showing either calcium progression (52.2%) or de novo calcifications (47.8%). On OCT, calcification volume increased from baseline to follow-up by 2.3 +/- 2.4 mm(3) (p = 0.001). The baseline virtual histologic tissue precursors of dense calcium at follow-up were necrotic core in 73.9% and fibrous or fibrofatty plaque in 10.9%. In 15.2%, calcium was already present at baseline. Precursors on OCT were lipid pool in 71.2%, fibrous plaque in 4.3%, and fibrocalcific plaque in 23.9%. CONCLUSIONS: The use of OCT and IVUS fusion imaging shows similar calcium growth in- and out-scaffold segments. Necrotic core is the most frequent precursor of calcification. The scaffold resorption process creates a tissue layer that re-caps the calcified plaques. (Absorb Clinical Investigation, Cohort B [ABSORB B]; NCT00856856).

To establish the accuracy of coronary computed tomography angiography (CTA) for in-scaffold quantitative evaluation with opti

Aims To compare the long-term safety and efficacy of bioresorbable vascular scaffold (BVS) with everolimus-eluting stent (EES) after percutaneous coronary interventions. Methods and results A systematic review and meta-analysis of randomized clinical trials comparing clinical outcomes of patients treated with BVS and EES with at least 24 months follow-up was performed. Adjusted random-effect model by the Knapp- Hartung method was used to compute odds ratios (OR) and 95% confidence intervals (CI). The primary safety outcome of interest was the risk of definite/probable device thrombosis (DT). The primary efficacy outcome of interest was the risk of target lesion failure (TLF). Five randomized clinical trials (n= 1730) were included. Patients treated with Absorb BVS had a higher risk of definite/probable DT compared with patients treated with EES (OR 2.93, 95%CI 1.37-6.26, P= 0.01). Very late DT (VLDT) occurred in 13 patients [12/996 (1.4%, 95%CI: 0.08-2.5) Absorb BVS vs. 1/701 (0.5%, 95%CI: 0.2-1.6) EES; OR 3.04; 95%CI 1.2-7.68, P = 0.03], 92% of the VLDT in the BVS group occurred in the absence of dual antiplatelet therapy (DAPT). Patients treated with Absorb BVS had a trend towards higher risk of TLF (OR 1.48, 95%CI 0.90-2.42, P= 0.09), driven by a higher risk of target vessel myocardial infarction and ischaemia-driven target lesion revascularization. No difference was found in the risk of cardiac death. Conclusion Compared with EES, the use of Absorb BVS was associated with a higher rate of DT and a trend towards higher risk of TLF. VLDT occurred in 1.4% of the patients, the majority of these events occurred in the absence of DAPT.

We realized that during the proof of our published article entitled “Assessment of the hemodynamic characteristics of Absorb BVS in a porcine coronary artery model” we made a mistake probably because of copy-paste process of the table sketch for Table 5b and Table 5c. We sincerely apologize for that mistake and kindly request from the journal to amend it. The authors would like to apologize for any inconvenience caused.

Background and aim Local hemodynamic changes are one of the main factors that determine the vessel wall biological response after stent/scaffold implantation. Computational fluid dynamic studies provide an opportunity to investigate the rheological effects of implanted stent

Coronary artery disease remains the leading cause of death in the developed world. Over recent years, research has been focused on the development of diagnostic intravascular imaging techniques that enable assessment of plaque composition and morphology, and allow identification of vulnerable, high-risk lesions. Nevertheless recent studies of coronary atherosclerosis have shown that invasive modalities have a limited accuracy in detecting lesions that will progress and cause events, whilst histology-based studies also highlighted the limitations of invasive imaging in assessing plaque characteristics. To overcome these drawbacks, multimodality imaging has been proposed. Although it is apparent that coronary imaging with two or three imaging modalities is time consuming and is associated with a risk of complications, evidence from small clinical studies demonstrated that it provides incremental information about plaque pathology and biology and underscored the need to develop dual-probe hybrid imaging catheters that would enable complete and comprehensive assessment of plaque morphology. This paper reviews the current clinical evidence that supports the use of multimodality intravascular imaging in the study of atherosclerosis, summarizes the key findings of the first invasive imaging studies that utilize hybrid dual-probe catheters, and discusses the limitations of combined intravascular imaging that restrict its broad application in both the clinical and research arena.

Cumulative evidence from histology-based studies demonstrate that the currently available intravascular imaging techniques have fundamental limitations that do not allow complete and detailed evaluation of plaque morphology and pathobiology, limiting the ability to accurately identify high-risk plaques. To overcome these drawbacks, newefforts are developing for data fusion methodologies and the design of hybrid, dual-probe catheters to enable accurate assessment of plaque characteristics, and reliable identification of high-risk lesions. Today several dual-probe catheters have been introduced including combined near infrared spectroscopy-intravascular ultrasound (NIRS-IVUS), that is already commercially available, IVUS-optical coherence tomography (OCT), the OCT-NIRS, the OCT-near infrared fluorescence (NIRF) molecular imaging, IVUS-NIRF, IVUS intravascular photoacoustic imaging and combined fluorescence lifetime-IVUS imaging. These multimodal approaches appear able to overcome limitations of standalone imaging and provide comprehensive visualization of plaque composition and plaque biology. The aim of this review article is to summarize the advances in hybrid intravascular imaging, discuss the technical challenges that should be addressed in order to have a use in the clinical arena, and present the evidence from their first applications aiming to highlight their potential value in the study of atherosclerosis.

_Introduction:_ Advances in our understanding about atherosclerotic evolution have enabled us to identify specific plaque characteristics that are associated with coronary plaque vulnerability and cardiovascular events. With constant improve

Underexpansion and overexpansion have been incriminated as causative factors of adverse cardiac events. However, dynamic biological interaction between vessel wall and scaffold may attenuate the adverse haemodynamic impact of overexpansion or underexpansion.

Aims: In the minimalist transcatheter aortic valve implantation (TAVI) era, the usage of transoesophageal echocardiography has become restricted. Conversely, aortography has gained clinical ground in quantifying prosthetic valve regurgitation (PVR) during the procedure. In a mock circulation system, we sought to compare the contrast volume required and the accuracy of aortographic videodensitometric PVR assessment using a synchronised diastolic and standard (non-synchronised) injection aortography. Methods and results: Synchronised diastolic injection triggered by the signal stemming from the mock circulation was compared with standard non-synchronised injection. A transcatheter heart valve was implanted and was deformed step by step by advancing a screw perpendicularly to the cage of the valve in order to create increasing PVR. Quantitative measurement of PVR was derived from time-density curves of both a reference area (aortic root) and a region of interest (left ventricle) developed by a videodensitometric software. The volume of contrast required for the synchronised diastolic injection was significantly less than in the non-synchronised injection (8.1 [7.9-8.5] ml vs. 19.4 [19.2-19.9] ml, p<0.001). The correlation between the two methods was substantial (Spearman's coefficient rho ranging from 0.991 to 0.968). Intraobserver intra-class correlation coefficient for both methods of injection was 0.999 (95% CI: 0.996-1.000) for the synchronised diastolic and 0.999 (95% CI: 0.996-1.000) for the non-synchronised injection group. The mean difference in the rating was 0.17% and limits of agreement were ±1.64% for both groups. Conclusions: A short synchronised diastolic injection enables contrast volume reduction during aortography without compromising the accuracy of the quantitative assessment of PVR using videodensitometry.