Search

The HALHF collaboration has discussed a new baseline for the project, taking into account comments from the accelerator community on various aspects of the original design. In particular, these concerned the practicality of the dual-purpose linac to accelerate both colliding positron bunches and the drive beams required for the plasma linac. In addition, many other aspects of the project were also considered; the discussion and conclusions are documented in this paper. Finally, a new baseline is outlined that has been optimised and addresses several weaknesses in the original design, has higher luminosity, reduced centre-of-mass energy boost and additional features such as positron polarization as well as electron polarization. Although HALHF has become longer and more expensive, it remains significantly smaller and cheaper than other mature Higgs factory designs currently under discussion., Comment: 32 pages, 13 figures, 2 tables

We introduce the new idea of a nonlinear active plasma lens, as part of a larger transport lattice for achromatic electron beam transport. The proposed implementation is based on using the Hall effect in a plasma and is motivated by 1D-hydrodynamic simulations. The manufactured design is presented, including its undergoing experimental characterisation on the CLEAR beam-line at CERN., Comment: 16 pages, 10 figures, submitted to AAC 2024 conference proceedings

We propose a novel scheme for controlling the injection of a high-quality electron bunch into a channel-guided laser plasma accelerator. This all-optical technique, constricted waveguide injection, creates a highly tunable controlled injection structure natively within a plasma waveguide, a key requirement for efficient acceleration of high-quality multi-GeV electron beams. We describe a simple optical setup to tailor the plasma and present start-to-end simulations showing the injection structure formation and the generation of a 1.1 GeV electron beam with 10 pC of charge and 0.35 % energy spread using 1 J of drive laser energy. Highly tunable tailored plasma sources, like those proposed here, enable fine control over the injection and acceleration processes and thus will be crucial for the development of application-focused laser plasma accelerators., Comment: 6 pages, 3 figures

The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $\gamma\gamma$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop., Comment: 72 pages

Active energy compression scheme is presently being investigated for future laser-plasma accelerators. This method enables generating laser-plasma accelerator electron beams with a small, $\sim 10^{-5}$, relative slice energy spread. When modulated by a laser pulse, such beams can produce coherent radiation at very high, $\sim 100$-th harmonics of the modulation laser wavelength, which are hard to access by conventional techniques. The scheme has a potential of providing additional capabilities for future plasma-based facilities by generating stable, tunable, narrow-band radiation.

Radio-frequency particle accelerators are engines of discovery, powering high-energy physics and photon science, but are also large and expensive due to their limited accelerating fields. Plasma-wakefield accelerators (PWFAs) provide orders-of-magnitude stronger fields in the charge-density wave behind a particle bunch travelling in a plasma, promising particle accelerators of greatly reduced size and cost. However, PWFAs can easily degrade the beam quality of the bunches they accelerate. Emittance, which determines how tightly beams can be focused, is a critical beam quality in for instance colliders and free-electron lasers, but is particularly prone to degradation. We demonstrate, for the first time, emittance preservation in a high-gradient and high-efficiency PWFA while simultaneously preserving charge and energy spread. This establishes that PWFAs can accelerate without degradation$\unicode{x2014}$essential for energy boosters in photon science and multistage facilities for compact high-energy particle colliders., Comment: 9 pages, 4 figures, 11 supplementary figures

Using realistic laser profiles for simulations of laser-plasma interaction is critical to reproduce experimental measurements, but the interface between experiments and simulations can be challenging. Similarly, start-to-end simulations with different codes may require error-prone manipulations to convert between different representations of a laser pulse. In this work, we propose LASY, an open-source Python library to simplify these workflows. Developed through an international collaboration between experimental, theoretical and computational physicists, LASY can be used to initialize a laser profile from an experimental measurement, from a simulation, or from analytics, manipulate it, and write it into a file in compliance with the openPMD standard. This profile can then be used as an input of a simulation code., Comment: 6 pages, 4 figures, EAAC2023 conference proceedings

Linear colliders rely on high-quality flat beams to achieve the desired event rate, while avoiding potentially deleterious beamstrahlung effects. Here, we show that flat beams in plasma accelerators can be subject to quality degradation due to emittance mixing. This effect occurs when the beam particles' betatron oscillations in a nonlinearly coupled wakefield become resonant in the horizontal and vertical planes. Emittance mixing can lead to a substantial decrease of the luminosity, the main quantity determining the event rate. In some cases, the use of laser drivers or flat particle beam drivers may decrease the fraction of resonant particles and, hence, mitigate emittance deterioration.

This paper introduces a novel formulation of the Particle-In-Cell (PIC) method for the modeling of relativistic plasmas, which leverages the ability of the Pseudo-Spectral Analytical Time-Domain solver (PSATD) to handle arbitrary time dependencies of the charge and current densities during one PIC cycle. The new formulation is applied to a modified set of Maxwell's equations that was proposed earlier in the context of divergence cleaning, and to recently proposed extensions of the PSATD-PIC algorithm. Detailed analysis and testings revealed that, under some condition, the new formulation can expand the range of numerical parameters under which PIC simulations are stable and accurate when modeling relativistic plasmas such as, e.g., plasma-based particle accelerators.

Preserving the quality of positron beams in plasma-based accelerators, where wakefields are generated in electron filaments, is challenging. These wakefields are characterized by transversely non-linear focusing fields and non-uniform accelerating fields. However, a nonzero plasma temperature linearizes the transverse wakefield within the central region of the electron filament. In this study, we employ 3D particle-in-cell simulations with mesh refinement to demonstrate that beams with emittances on the order of tens of nanometers are contained within the linearized region of the transverse wakefield. This enables emittance preservation to one percent, while positron beams with the same charge and micrometer emittances, which sample the non-linear part of the transverse wakefield, experience a relative emittance growth of ten percent. Additionally, we observe a significant reduction in the growth rate of the slice energy spread for the tens of nanometers emittance beams in comparison to the micrometer emittance beams. The utilization of warm plasmas in conjunction with low-emittance beams opens up new avenues for enhancing the beam quality across various plasma-based positron acceleration approaches., Comment: To be submitted as a proceedings for the 6th European Advanced Accelerator Concepts workshop

It is generally argued that distress vocalizations, a common modality for alerting conspecifics across a wide range of terrestrial vertebrates, share acoustic features that allow heterospecific communication. Yet studies suggest that the acoustic traits used to decode distress may vary between species, leading to decoding errors. Here we found through playback experiments that Nile crocodiles are attracted to infant hominid cries (bonobo, chimpanzee and human), and that the intensity of crocodile response depends critically on a set of specific acoustic features (mainly deterministic chaos, harmonicity and spectral prominences). Our results suggest that crocodiles are sensitive to the degree of distress encoded in the vocalizations of phylogenetically very distant vertebrates. A comparison of these results with those obtained with human subjects confronted with the same stimuli further indicates that crocodiles and humans use different acoustic criteria to assess the distress encoded in infant cries. Interestingly, the acoustic features driving crocodile reaction are likely to be more reliable markers of distress than those used by humans. These results highlight that the acoustic features encoding information in vertebrate sound signals are not necessarily identical across species.

The International Linear Collider is a planned electron-positron linear collider with its positron source producing positrons by aiming undulator radiation onto a rotating target. The resulting, highly divergent positron beam requires immediate optical matching to improve the luminosity and therefore the success of the intended collision experiments. Here, optical matching refers to the process of capturing particles and making them available for downstream beamline elements like accelerators. In the past, this has been done with sophisticated coils, but more recently the usage of a current-carrying plasma, a so-called plasma lens, has been proposed as an alternative. For the International Linear Collider idealised particle tracking simulations have already been done with the purpose of finding the optimal plasma lens design with respect to the captured positron yield. The proposed design is characterised by a linearly widened radius in beam direction. Now further research and development of this design is required, including both experiments with a prototype set-up as well as corresponding simulations modelling the hydrodynamics of the current-carrying plasma and the resulting magnetic field. The accuracy of the latter will benefit greatly from the former. In this work, first preliminary hydrodynamic simulations instil confidence into further endeavours., Comment: Talk presented at the International Workshop on Future Linear Colliders (LCWS 2023), 15-19 May 2023. C23-05-15.3

In recent years, hydrodynamic optical-field-ionized (HOFI) channels have emerged as a promising technique to create laser waveguides suitable for guiding tightly-focused laser pulses in a plasma, as needed for laser-plasma accelerators. While experimental advances in HOFI channels continue to be made, the underlying mechanisms and the roles of the main parameters remain largely unexplored. In this work, we propose a start-to-end simulation pipeline of the HOFI channel formation and the resulting guiding properties, and use it to explore the underlying physics and the tunability of HOFI channels. This approach is benchmarked against experimental measurements. HOFI channels are shown to feature excellent guiding properties over a wide range of parameters, making them a promising and tunable waveguide option for laser-plasma accelerators., Comment: 8 pages (+5 appendix), 7 figures, submitted to PRResearch

For plasma-wakefield accelerators to fulfil their potential for cost effectiveness, it is essential that their energy-transfer efficiency be maximized. A key aspect of this efficiency is the near-complete transfer of energy, or depletion, from the driver electrons to the plasma wake. Achieving full depletion is limited by the process of re-acceleration, which occurs when the driver electrons decelerate to non-relativistic energies, slipping backwards into the accelerating phase of the wakefield and being subsequently re-accelerated. Such re-acceleration is unambiguously observed here for the first time. At this re-acceleration limit, we measure a beam driver depositing (57 $\pm$ 3)\% of its energy into a 195-mm-long plasma. Combining this driver-to-plasma efficiency with previously measured plasma-to-beam and expected wall-plug-to-driver efficiencies, our result suggests that plasma-wakefield accelerators can in principle reach or even exceed the energy-transfer efficiency of conventional accelerators., Comment: Manuscript: 7 pages, 4 figures; Supplementary material: 3 pages, 1 figure

Developing complex, reliable advanced accelerators requires a coordinated, extensible, and comprehensive approach in modeling, from source to the end of beam lifetime. We present highlights in Exascale Computing to scale accelerator modeling software to the requirements set for contemporary science drivers. In particular, we present the first laser-plasma modeling on an exaflop supercomputer using the US DOE Exascale Computing Project WarpX. Leveraging developments for Exascale, the new DOE SCIDAC-5 Consortium for Advanced Modeling of Particle Accelerators (CAMPA) will advance numerical algorithms and accelerate community modeling codes in a cohesive manner: from beam source, over energy boost, transport, injection, storage, to application or interaction. Such start-to-end modeling will enable the exploration of hybrid accelerators, with conventional and advanced elements, as the next step for advanced accelerator modeling. Following open community standards, we seed an open ecosystem of codes that can be readily combined with each other and machine learning frameworks. These will cover ultrafast to ultraprecise modeling for future hybrid accelerator design, even enabling virtual test stands and twins of accelerators that can be used in operations., Comment: 4 pages, 3 figures, presented at the 20th Advanced Accelerator Concepts Workshop (AAC22)

Particle-in-cell simulations are among the most essential tools for the modeling and optimization of laser-plasma accelerators, since they reproduce the physics from first principles. However, the high computational cost associated with them can severely limit the scope of parameter and design optimization studies. Here, we show that a multitask Bayesian optimization algorithm can be used to mitigate the need for such high-fidelity simulations by incorporating information from inexpensive evaluations of reduced physical models. In a proof-of-principle study, where a high-fidelity optimization with FBPIC is assisted by reduced-model simulations with Wake-T, the algorithm demonstrates an order-of-magnitude speedup. This opens a path for the cost-effective optimization of laser-plasma accelerators in large parameter spaces, an important step towards fulfilling the high beam quality requirements of future applications.

Plasma accelerators sustain extreme field gradients, and potentially enable future compact linear colliders. Although tremendous progress has been achieved in accelerating electron beams in a plasma accelerator, positron acceleration with collider-relevant parameters is challenging. A recently proposed positron acceleration scheme relying on the wake generated by an electron drive beam in a plasma column has been shown to be able to accelerate positron witness beams with low emittance and low energy spread. However, since this scheme relies on cylindrical symmetry, it is possibly prone to transverse instabilities that could lead, ultimately, to beam break-up. In this article, we show that the witness beam itself is subject to various damping mechanisms and, therefore, this positron acceleration scheme is inherently stable towards misalignment of the drive and witness beams. This enables stable, high-quality plasma-based positron acceleration.

White paper to the Proceedings of the U.S. Particle Physics Community Planning Exercise (Snowmass 2021): Linear colliders based on laser-plasma accelerators, Comment: Contribution to Snowmass 2021, Accelerator Frontier

After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry., Comment: contribution to Snowmass 2021

The interaction of intense particle bunches with plasma can give rise to plasma wakes capable of sustaining gigavolt-per-metre electric fields, which are orders of magnitude higher than provided by state-of-the-art radio-frequency technology. Plasma wakefields can, therefore, strongly accelerate charged particles and offer the opportunity to reach higher particle energies with smaller and hence more widely available accelerator facilities. However, the luminosity and brilliance demands of high-energy physics and photon science require particle bunches to be accelerated at repetition rates of thousands or even millions per second, which are orders of magnitude higher than demonstrated with plasma-wakefield technology. Here we investigate the upper limit on repetition rates of beam-driven plasma accelerators by measuring the time it takes for the plasma to recover to its initial state after perturbation by a wakefield. The many-nanosecond-level recovery time measured establishes the in-principle attainability of megahertz rates of acceleration in plasmas. The experimental signatures of the perturbation are well described by simulations of a temporally evolving parabolic ion channel, transferring energy from the collapsing wake to the surrounding media. This result establishes that plasma-wakefield modules could be developed as feasible high-repetition-rate energy boosters at current and future particle-physics and photon-science facilities.

Emittance is a beam quality that is vital for many future applications of advanced accelerators, such as compact free-electron lasers and linear colliders. In this paper, we review the challenges of preserving the transverse emittance during acceleration, both inside and outside accelerator stages. Sources of emittance growth range from space charge and instabilities caused by transverse wakefields, which can occur in any advanced accelerator scheme regardless of medium or driver type, to sources more specific to plasma accelerators, such as mismatching, misalignment, ion motion, Coulomb scattering, chromaticity between stages, and more., Comment: 23 pages, 14 figures, prepared for ICFA Beam Dynamics Newsletter 83

Physical scenarios where the electromagnetic fields are so strong that Quantum ElectroDynamics (QED) plays a substantial role are one of the frontiers of contemporary plasma physics research. Investigating those scenarios requires state-of-the-art Particle-In-Cell (PIC) codes able to run on top high-performance computing machines and, at the same time, able to simulate strong-field QED processes. This work presents the PICSAR-QED library, an open-source, portable implementation of a Monte Carlo module designed to provide modern PIC codes with the capability to simulate such processes, and optimized for high-performance computing. Detailed tests and benchmarks are carried out to validate the physical models in PICSAR-QED, to study how numerical parameters affect such models, and to demonstrate its capability to run on different architectures (CPUs and GPUs). Its integration with WarpX, a state-of-the-art PIC code designed to deliver scalable performance on upcoming exascale supercomputers, is also discussed and validated against results from the existing literature., Comment: 33 pages, 7 figures, 4 tables

Modeling plasma accelerators is a computationally challenging task and the quasi-static particle-in-cell algorithm is a method of choice in a wide range of situations. In this work, we present the first performance-portable, quasi-static, three-dimensional particle-in-cell code HiPACE++. By decomposing all the computation of a 3D domain in successive 2D transverse operations and choosing appropriate memory management, HiPACE++ demonstrates orders-of-magnitude speedups on modern scientific GPUs over CPU-only implementations. The 2D transverse operations are performed on a single GPU, avoiding time-consuming communications. The longitudinal parallelization is done through temporal domain decomposition, enabling near-optimal strong scaling from 1 to 512 GPUs. HiPACE++ is a modular, open-source code enabling efficient modeling of plasma accelerators from laptops to state-of-the-art supercomputers.

The present state of progress in laser wakefield acceleration encourages considering it as a practical alternative to conventional particle accelerators. A promising application would be to use a laser-plasma accelerator as an injector for a synchrotron light source. Yet, the energy spread and jitter of the laser-plasma beam pose a significant difficulty for an efficient injection. In this paper we propose a design of a prototype injector to deliver 500 MeV low-intensity electron bunches to the DESY-II electron synchrotron. The design utilizes presently available conventional accelerator technology, such as a chicane and an X-band radio frequency cavity, to reduce the energy spread and jitter of the electron beam down to a sub-per-mille level.

Laser-plasma accelerators outperform current radiofrequency technology in acceleration strength by orders of magnitude. Yet, enabling them to deliver competitive beam quality for demanding applications, particularly in terms of energy spread and stability, remains a major challenge. In this Letter, we propose to combine bunch decompression and active plasma dechirping for drastically improving the energy profile and stability of beams from laser-plasma accelerators. Realistic start-to-end simulations demonstrate the potential of these post-acceleration phase-space manipulations for simultaneously reducing an initial energy spread and energy jitter of $\sim1$-$2\%$ to ${\lesssim} 0.1 \%$, closing the beam-quality gap to conventional acceleration schemes., Comment: Final version accepted for publication

Explicit electromagnetic Particle-In-Cell (PIC) codes are typically limited by the Courant- Friedrichs-Lewy (CFL) condition, which implies that the timestep multiplied by the speed of light must be smaller than the smallest cell size. In the case of boosted-frame PIC simulations of plasma-based acceleration, this limitation can be a major hinderance as the cells are often very elongated along the longitudinal direction and the timestep is thus limited by the small, transverse cell size. This entails many small-timestep PIC iterations, and can limit the potential speed-up of the boosted-frame technique. Here, by using a CFL-free analytical spectral solver, and by mitigating additional numerical instabilities that arise at large timestep, we show that it is possible to overcome traditional limitations on the timestep and thereby realize the full potential of the boosted-frame technique over a much wider range of parameters.

Maintaining computational load balance is important to the performant behavior of codes which operate under a distributed computing model. This is especially true for GPU architectures, which can suffer from memory oversubscription if improperly load balanced. We present enhancements to traditional load balancing approaches and explicitly target GPU architectures, exploring the resulting performance. A key component of our enhancements is the introduction of several GPU-amenable strategies for assessing compute work. These strategies are implemented and benchmarked to find the most optimal data collection methodology for in-situ assessment of GPU compute work. For the fully kinetic particle-in-cell code WarpX, which supports MPI+CUDA parallelism, we investigate the performance of the improved dynamic load balancing via a strong scaling-based performance model and show that, for a laser-ion acceleration test problem run with up to 6144 GPUs on Summit, the enhanced dynamic load balancing achieves from 62%--74% (88% when running on 6 GPUs) of the theoretically predicted maximum speedup; for the 96-GPU case, we find that dynamic load balancing improves performance relative to baselines without load balancing (3.8x speedup) and with static load balancing (1.2x speedup). Our results provide important insights into dynamic load balancing and performance assessment, and are particularly relevant in the context of distributed memory applications ran on GPUs., Comment: 11 pages, 8 figures. Paper accepted in the Platform for Advanced Scientific Computing Conference (PASC '21), July 5 to 9, 2021, Geneva, Switzerland

WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy followed to allow WarpX to use the GPU-accelerated nodes on OLCF's Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give current performance results on a series of relevant benchmark problems., Comment: 11 pages, 5 figures, accepted by Parallel Computing. Minor revisions, results unchanged

We propose a scheme to explore regimes of strong-field Quantum Electrodynamics (SF-QED) otherwise unattainable with the currently available laser technology. The scheme relies on relativistic plasma mirrors curved by radiation pressure to boost the intensity of PetaWatt-class laser pulses by Doppler effect and focus them to extreme field intensities. We show that very clear SF-QED signatures could be observed by placing a secondary target where the boosted beam is focused., Comment: 5 figures

We studied the dependence of solid deposit shape obtained by free drying of sessile drops on the particles concentration and Derjaguin-Landau-Verwey-Overbeek (DLVO) particle/substrate interaction. In contrast to previous contributions using pH as a control parameter of interactions, we investigated an unprecedentedly wide range of concentrations and particle/substrate DLVO forces by modifying the nature of the substrate and particles as well as their size and surface chemistry whereas long-distance repulsive interactions between particles were maintained for most of the drying time. Our main result is that the different shapes of deposits obtained by modifying the particle concentration are the same in the different regimes of concentration regardless of particle/substrate interaction in the studied range of DLVO forces and particle concentrations. The second result is that, contrary to expectations, the dominant morphology of dry patterns at low particle concentration always shows a dot-like pattern for all the studied systems.

We propose a method to generate femtosecond, relativistic and high-charge electron bunches using few-cycle and tightly focused radially polarized laser pulses. In this scheme, the incident laser pulse reflects off an overdense plasma that injects electrons into the reflected pulse. Particle-In-Cell simulations show that the plasma injects electrons ideally, resulting in a dramatic increase of charge and energy of the accelerated electron bunch in comparison to previous methods. This method can be used to generate femtosecond pC bunches with energies in the 1-10 MeV range using realistic laser parameters corresponding to current kHz laser systems.

function of the CEP, we observe a transition from a modulated to a continuous SHHG spectrum, indicating the transition from double to high-contrast isolated attosecond pulse emission. Single shot-acquisitions of XUV spectral continua support isolated attosecond pulses with isolation degrees between 10 and 50 for the majority of the driving pulse CEPs, which represents a significant improvement in terms of isolation degree as well as repetition rate over previous results obtained with 2-cycle drivers at 10-Hz. 2D Particle-in-cell simulations corroborate this interpretation and predict percent-level efficiencies for the generation of an isolated attosecond pulse even without any spectral filtering.

The interaction of intense laser beams with plasmas created on solid targets involves a rich non-linear physics. Because such dense plasmas are reflective for laser light, the coupling with the incident beam occurs within a thin layer at the interface between plasma and vacuum. One of the main paradigms used to understand this coupling, known as Brunel mechanism, is expected to be valid only for very steep plasma surfaces. Despite innumerable studies, its validity range remains uncertain, and the physics involved for smoother plasma-vacuum interfaces is unclear, especially for ultrahigh laser intensities. We report the first comprehensive experimental and numerical study of the laser-plasma coupling mechanisms as a function of the plasma interface steepness, in the relativistic interaction regime. Our results reveal a clear transition from the temporally-periodic Brunel mechanism to a chaotic dynamic associated to stochastic heating. By revealing the key signatures of these two distinct regimes on experimental observables, we provide an important landmark for the interpretation of future experiments., Comment: 16 pages, 12 figures