Search

Biochemical acyl transfer cascades, such as those initiated by the adenylation of carboxylic acids, are central to various biological processes, including protein synthesis and fatty acid metabolism. Designing cascade reactions in aqueous media remains challenging due to the need to control multiple, sequential reactions in a single pot and manage the stability of reactive intermediates. Herein, we developed abiotic cascades using aminoacyl phosphate esters, the synthetic counterparts of biological aminoacyl adenylates, to drive sequential chemical reactions and self-assembly in a single pot. We demonstrated that the structural elements of amino acid side chains (aromatic versus aliphatic) significantly influence the reactivity and half-lives of aminoacyl phosphate esters, ranging from hours to days. This behavior, in turn, affects the number of couplings we can achieve in the network and the self-assembly propensity of activated intermediate structures. The cascades are constructed using bifunctional peptide substrates featuring side chain nucleophiles. Specifically, aromatic amino acids facilitate the formation of transient thioesters, which preorganized into spherical aggregates and further couple into chimeric assemblies composed of esters and thioesters. In contrast, aliphatic amino acids, which lack the ability to form such structures, predominantly undergo hydrolysis, bypassing further transformations after thioester formation. Additionally, in mixtures containing multiple aminoacyl phosphate esters and peptide substrates, we achieved selective product formation by following a distinct pathway that favors subsequent reactions through reactivity changes and self-assembly. By coupling chemical reactions with molecules of varying reactivity time scales, we can drive multiple reaction clocks with distinct lifetimes and self-assembly dynamics, facilitating precise temporal and structural regulation.

In this project, different calcification methods for collagen and collagen coatings were compared in terms of their applicability for 3D printing and production of collagen-coated scaffolds. For this purpose, scaffolds were printed from polycaprolactone PCL using the EnvisionTec 3D Bioplotter and then coated with collagen. Four different coating methods were then applied: hydroxyapatite (HA) powder directly in the collagen coating, incubation in 10× SBF, coating with alkaline phosphatase (ALP), and coating with poly-L-aspartic acid. The results were compared by ESEM, µCT, TEM, and EDX. HA directly in the collagen solution resulted in a pH change and thus an increase in viscosity, leading to clumping on the scaffolds. As a function of incubation time in 10× SBF as well as in ALP, HA layer thickness increased, while no coating on the collagen layer was apparently observed with poly-L-aspartic acid. Only ultrathin sections and TEM with SuperEDX detected nano crystalline HA in the collagen layer. Exclusively the incubation in poly-L-aspartic acid led to HA crystals within the collagen coating compared to all other methods where the HA layers formed in different forms only at the collagen layer.

In search of a new way to fabricate graphene-like materials, isostatic graphite targets were ablated using high peak power with a nanosecond-pulsed infrared laser. We conducted dry ablations in an argon atmosphere and liquid-phase ablations in the presence of a liquid medium (water or toluene). After the dry ablation, the SEM images of the target showed carbon in the form of a volcano-like grain structure, which seemed to be the result of liquid carbon ejected from the ablation center. No graphite exfoliation could be achieved using dry ablation. When using liquid phase ablation with water or toluene as a liquid medium, no traces of the formation of liquid carbon were found, but cleaner and deeper craters were observed. In particular, when using toluene as a liquid medium, typical graphite exfoliation was found. We believe that due to the extremely high pressure and high temperature induced by the laser pulses, toluene was able to intercalate into the graphite layers. Between the laser pulses, the intercalated toluene was able to flash evaporate and blow-up the graphite, which resulted in exfoliated graphite. Exfoliated graphite was found on the ablated graphite surface, as well as in the toluene medium. The ablation experiments with toluene undertaken in this study demonstrated an effective method of producing micrometer-sized graphene material. When using water as a liquid medium, no massive graphite exfoliation was observed. This meant that under the used laser conditions, toluene was a better intercalant for graphite exfoliation than water.

Porous membranes with special wetting properties have attracted great interest due to their various functions and wide applications, including water filtration, selective oil/water separation and oil skimming. Special wetting properties such as superhydrophobicity can be achieved by controlling the surface chemistry as well as the surface topography of a substrate. Three-dimensional (3D) printing is a promising method for the fast and easy generation of various structures. The most common method for 3D printing of superhydrophobic materials is a two-step fabrication process: 3D printing of user-defined topographies, such as surface structures or bulk porosity, followed by a chemical post-processing with low-surface energy chemicals such as fluorinated silanes. Another common method is using a hydrophobic polymer ink to print intricate surface structures. However, the resolution of most common printers is not sufficient to produce nano-/microstructured textures, moreover, the resulting delicate surface micro- or nanostructures are very prone to abrasion. Herein, we report a simple approach for 3D printing of superhydrophobic micro-/nanoporous membranes in a single step, combining the required topography and chemistry. The bulk porosity of this material, which we term "Fluoropor", makes it insensitive to abrasion. To achieve this, a photocurable fluorinated resin is mixed with a porogen mixture and 3D printed using a stereolithography (SLA) printing process. This way, micro-/nanoporous membranes with superhydrophobic properties with static contact angles of 164° are fabricated. The pore size of the membranes can be adjusted from 30 nm to 300 nm by only changing the porogen ratio in the mixture. We show the applicability of the printed membranes for oil/water separation and the formation of Salvinia layers which are of great interest for drag reduction in maritime transportation and fouling prevention., Competing Interests: The authors declare no conflict of interest., (This journal is © The Royal Society of Chemistry.)

The glass transition temperature ( T g ) is one of the most important properties of polymeric materials. In order to reveal whether the scissors effect , i.e., the Fox-Flory relationship between T g and the average molecular weight between crosslinking points ( M c ), reported only in one case for polymer conetworks so far, is more generally effective or valid only for a single case, a series of poly(methyl methacrylate)- l -polyisobutylene (PMMA- l -PIB) conetworks was prepared and investigated. Two T g s were found for the conetworks by DSC. Fox-Flory type dependence between T g and M c of the PMMA component ( T g = T g,∞ - K/M c ) was observed. The K constants for the PMMA homopolymer and for the PMMA in the conetworks were the same in the margin of error. AFM images indicated disordered bicontinuous, mutually nanoconfined morphology with average domain sizes of 5-20 nm, but the correlation between T g and domain sizes was not found. These new results indicate that the macrocrosslinkers act like molecular scissors ( scissors effect ), and the T g of PMMA depend exclusively on the M c in the conetworks. Consequently, these findings mean that the scissors effect is presumably a general phenomenon in nanophase-separated polymer conetworks, and this finding could be utilized in designing, processing, and applications of these novel materials.

Despite the great interest in nanoconfined materials nowadays, nanocompartmentalized poly(ionic liquid)s (PILs) have been rarely investigated so far. Herein, we report on the successful alkylation of poly(1-vinylimidazole) with methyl iodide in bicontinuous nanophasic poly(1-vinylimidazole)- l -poly(tetrahydrofuran) (PVIm- l -PTHF) amphiphilic conetworks (APCNs) to obtain nanoconfined methylated PVImMe- l -PTHF poly(ionic liquid) conetworks (PIL-CNs). A high extent of alkylation (~95%) was achieved via a simple alkylation process with MeI at room temperature. This does not destroy the bicontinuous nanophasic morphology as proved by SAXS and AFM, and PIL-CNs with 15-20 nm d-spacing and poly(3-methyl-1-vinylimidazolium iodide) PIL nanophases with average domain sizes of 8.2-8.4 nm are formed. Unexpectedly, while the swelling capacity of the PIL-CN dramatically increases in aprotic polar solvents, such as DMF, NMP, and DMSO, reaching higher than 1000% superabsorbent swelling degrees, the equilibrium swelling degrees decrease in even highly polar protic (hydrophilic) solvents, like water and methanol. An unprecedented Gaussian-type relationship was found between the ratios of the swelling degrees versus the polarity index, indicating increased swelling for the nanoconfined PVImMe- l -PTHF PIL-CNs in solvents with a polarity index between ~6 and 9.5. In addition to the nanoconfined structural features, the unique selective superabsorbent swelling behavior of the PIL-CNs can also be utilized in various application fields.

Multicellular spheroids represent a well-established 3D model to study healthy and diseased cells in vitro. The use of conventional 3D cell culture platforms for the generation of multicellular spheroids is limited to cell types that easily self-assemble into spheroids because less adhesive cells fail to form stable aggregates. A high-precision micromoulding technique developed in our laboratory produces deep conical agarose microwell arrays that allow the cultivation of uniform multicellular aggregates, irrespective of the spheroid formation capacity of the cells. Such hydrogel arrays warrant a steady nutrient supply for several weeks, permit live volumetric measurements to monitor cell growth, enable immunohistochemical staining, fluorescence-based microscopy, and facilitate immediate harvesting of cell aggregates. This system also allows co-cultures of two distinct cell types either in direct cell-cell contact or at a distance as the hydrogel permits diffusion of soluble compounds. Notably, we show that co-culture of a breast cancer cell line with bone marrow stromal cells enhances 3D growth of the cancer cells in this system.

A contact-active antimicrobial coating is described that is only degraded in the presence of cellulase, which is an extracellular enzyme of numerous microbial strains. Antimicrobial DDA was grafted to a cellulose backbone via a polymeric spacer. The antimicrobial activity of the coatings, their biodegradability and their self-polishing potential were investigated. It was found that all coatings were antimicrobially active against Staphylococcus aureus. Coatings with high DS and long polymeric spacers degraded in water, while coatings with low DS and short spacers were not hydrolyzed even in the presence of cellulase. One coating was found to be selectively degradable by cellulase and recovered most of its antimicrobial activity after overloading and subsequent treatment with cellulase., (© 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A detailed description is given of the preparation of a polymer solar cell and its characterization. The solar cell can be prepared entirely in the ambient atmosphere by solution processing without the use of vacuum coating steps, and it can be operated in the ambient atmosphere with good operational stability under illumination (1000 W m(-2), AM1.5G, 72 ± 2 °C, 35 ± 5% relative humidity) for 100 h with a 20% loss in efficiency with respect to the initial performance. The dark storability (darkness, 25 °C, 35 ± 5% relative humidity) has been shown to exceed six months without notable loss in efficiency. The devices do not require any form of encapsulation to gain stability, while a barrier for mechanical protection may be useful. The devices are based on soluble zinc oxide nanoparticles mixed with the thermocleavable conjugated polymer poly-(3-(2-methylhexan-2-yl)-oxy-carbonyldithiophene) (P3MHOCT), which through a thermal treatment is converted to the insoluble form poly(3-carboxydithiophene) (P3CT) that generally gives stable polymer solar cells. The devices employed a solution based silver back electrode. One advantage is that preparation of the devices is very simple and can be carried out by hand under ambient conditions, requiring only a hot plate that can reach a temperature of 210 °C, and preferably also a spincoater. This type of device is thus excellently suited for teaching and demonstration purposes provided that the materials are at hand.

The human genome holds an extraordinary trove of information about human development, physiology, medicine and evolution. Here we report the results of an international collaboration to produce and make freely available a draft sequence of the human genome. We also present an initial analysis of the data, describing some of the insights that can be gleaned from the sequence.

Fractures of the hand and fingers showing comminution or associated soft-tissue lesions are best treated with external fixation. In contrast to other systems, the new AO mini-external fixator enables less bulky unilateral fixation facilitating early mobilisation and the special design of the double clamps allows preliminary intraoperative stabilisation with only one wire in each fragment. Modular fixation makes free placement of the wires possible with accommodation of bone and soft tissue lesions. Twenty patients with hand injuries showed uneventful soft tissue healing and there were no cases of non-union in 19 metacarpal and phalangeal fractures.

Unlabelled: Between January 1st 1992 and December 31st 1993 140 non-complex (i.e. nerve, vascular, tendon injuries) fractures of the peripheral hand skeleton were operated at the Policlinic of the Kantonsspital Basel. In a retrospective study we analyzed results, complications and absence from work. We treated 110 male and 30 female patients with a mean age of 47 years. 45 fractures were treated by plate fixation, 45 by screw fixation, 53 times we applied k-wires and once a mini-fix-ex (AO-Prototype). Plate and screw fixation were performed with AO-mini-implants. 90% of our patients had an uneventful postoperative course. In spite of functional after-treatment we noted in 8.6% of the patients a relevant loss of movement leading to operative tenolysis in 7 patients. Fractures at the level of PIP were most frequently associated with loss of movement. Absence from work was 59 days in average (1-206)!, Conclusions: Peripheral osteosynthesis of the hand (non-complex) are effectively treated on an out-patient basis. In spite of functional after-treatment about 10% of patients have a relevant postoperative reduction in motility. Absence from work is relatively long after operative treatment of peripheral hand fractures.