Search

Abstract In response to the global challenge of reducing carbon emissions and energy consumption from regulating indoor climates, we investigate the applicability of biobased cellulosic materials and bioinspired 4D-printing for weather-responsive adaptive shading in building facades. Cellulose is an abundantly available natural material resource that exhibits hygromorphic actuation potential when used in 4D-printing to emulate motile plant structures in bioinspired bilayers. Three key aspects are addressed: (i) examining the motion response of 4D-printed hygromorphic bilayers to both temperature and relative humidity, (ii) verifying the responsiveness of self-shaping shading elements in lab-generated conditions as well as under daily and seasonal weather conditions for over a year, and (iii) deploying the adaptive shading system for testing in a real building facade by upscaling the 4D-printing manufacturing process. This study demonstrates that hygromorphic bilayers can be utilized for weather-responsive facades and that the presented system is architecturally scalable in quantity. Bioinspired 4D-printing and biobased cellulosic materials offer a resource-efficient and energy-autonomous solution for adaptive shading, with potential contributions towards indoor climate regulation and climate change mitigation.

A key challenge in designing soft continuum robotic arms is the realization of intelligent behavior while minimizing sensing, actuation, and control effort. This work investigates how soft continuum arms can benefit from mimicking the distribution of flexural rigidity of searcher stems in climbing plants to accomplish this goal. A modeling approach is presented to tune both the structural design and the tactile sensor design of a soft continuum arm inspired by the flexural rigidity distribution of Mandevilla cf. splendens’ searcher stems. The resulting soft continuum arm, named Mandy, can detect suitable supports along its length and twining around them using a single sensor and actuator. Through simulations and experiments, it is shown such behavior cannot be achieved with a soft continuum arm possessing uniform structural stiffness and a standard tactile sensor design. Thus, the significance of investing greater effort in structural design, leveraging biological data, to improve the design of soft continuum arms with more compact actuation and sensing hardware, is highlighted.

With a focus on education and teaching, we provide general background information on bioinspired optimization methods by comparing the concept of optimization and the search for an optimum in engineering and biology. We introduce both the principles of Darwinian evolution and the basic evolutionary optimization procedure of evolution strategies. We provide three educational modules in work sheets that can be used by teachers and students to improve their understanding of evolution strategies. The educational module “Optimization of a Milk Carton” shows that the material consumption in producing a milk carton can be minimized using an evolution strategy with a mutative step size control. The use of a standard dice and a pocket calculator enables new milk cartons to be generated, with the offspring having the lowest material consumption becoming the parent of the next generation. The other educational modules deal with the so-called brachistochrone problem. The module “Fastest and Shortest Marble Track” provides a construction plan for a marble track whereby students can experimentally compare the “path of shortest length” with the “path of shortest time”. The EvoBrach software, is used in the module “Various Marble Track Shapes” to compare the running times of a marble on a straight line, a parabola, and a brachistochrone. In conclusion, the introduction to the biomimetic method of evolution strategies and the educational modules should deepen the understanding of both optimization problems and biological evolution.

Hygroscopic seed-scale movement is responsible for the weather-adaptive opening and closing of pine cones and for facilitating seed dispersal under favorable environmental conditions. Although this phenomenon has long been investigated, many involved processes are still not fully understood. To gain a deeper mechanical and structural understanding of the cone and its functional units, namely the individual seed scales, we have investigated their desiccation- and wetting-induced movement processes in a series of analyses and manipulative experiments. We found, for example, that the abaxial scale surface is responsible for the evaporation of water from the closed cone and subsequent cone opening. Furthermore, we tested the capability of dry and deformed scales to restore their original shape and biomechanical properties by wetting. These results shed new light on the orchestration of scale movement in cones and the involved forces and provide information about the functional robustness and resilience of cones, leading to a better understanding of the mechanisms behind hygroscopic pine cone opening, the respective ecological framework, and, possibly, to the development of smart biomimetic actuators.

Abstract Tendrils of climbing plants coil along their length, thus forming a striking helical spring and generating tensional forces. It is found that, for tendrils of the passion flower Passiflora caerulea, the generated force lies in the range of 6–140 mN, which is sufficient to lash the plant tightly to its substrate. Further, it is revealed that the generated force strongly correlates with the water status of the plant. Based on a combination of in situ force measurements with anatomical investigations and dehydration‐rehydration experiments on both entire tendril segments and isolated lignified tissues, a two‐phasic mechanism for spring formation is proposed. First, during the free coiling phase, the center of the tendril begins to lignify unilaterally. At this stage, both the generated tension and the stability of the form of the spring still depend on turgor pressure. The unilateral contraction of a bilayer as being the possible driving force for the tendril coiling motion is discussed. Second, in a stabilization phase, the entire center of the coiled tendril lignifies, stiffening the spring and securing its function irrespective of its hydration status.

Wildfires are unplanned conflagrations perceived as a threat by humans. However, fires are essential for the survival of fire-adapted plants. On the one hand, wildfires cause major damage worldwide, burning large areas of forests and landscapes, threatening towns and villages, and generating high levels of air pollution. On the other hand, fire-adapted plants (pyrophytes) in the fire landscapes of the Earth are able to survive exposure to heat (e.g., because of their thick bark, which protects their living tissue) and benefit from fire directly (e.g., fire initiates cone opening and seed release) or indirectly (e.g., fewer competing plants of fire-sensitive species remain, seeds germinate in the ash-fertilized soil). We present the experimental set-up and results of a fire experiment on bark samples used as a basis to assess the fire tolerance of various trees. Fire tolerance is defined as the ability of a tree to survive a surface fire (up to 200 °C and 5 min duration). The measure of the fire tolerance for a tree species is the time taken for the vascular cambium under the insulating bark to reach the critical temperature of 60 °C. Within an educational module, we provide worksheets for teachers and students enabling them to analyze the fire tolerance of various tree barks.

The plant cuticle is a multifunctional barrier that separates the organs of the plant from the surrounding environment. Cuticular ridges are microscale wrinkle-like cuticular protrusions that occur on many flower and leaf surfaces. These microscopic ridges can help against pest insects by reducing the frictional forces experienced when they walk on the leaves and might also provide mechanical stability to the growing plant organs. Here, we have studied the development of cuticular ridges on adaxial leaf surfaces of the tropical Araceae Schismatoglottis calyptrata. We used polymer replicas of adaxial leaf surfaces at various ontogenetic stages to study the morphological changes occurring on the leaf surfaces. We characterized the replica surfaces by using confocal laser scanning microscopy and commercial surface analysis software. The development of cuticular ridges is polar and the ridge progression occurs basipetally with a specific inclination to the midrib on Schismatoglottis calyptrata leaves. Using Colorado potato beetles as model species, we performed traction experiments on freshly unrolled and adult leaves and found low walking frictional forces of insects on both of these surfaces. The changes in the micro- and macroscale morphology of the leaves should improve our understanding of the way that plants defend themselves against insect herbivores.

Abstract Arboreal habitats are characterized by a complex three-dimensional array of branches that vary in numerous characteristics, including incline, compliance, roughness, and diameter. Gaps must often be crossed, and this is frequently accomplished by leaping. Geckos bearing an adhesive system often jump in arboreal habitats, although few studies have examined their jumping biomechanics. We investigated the biomechanics of landing on smooth surfaces in crested geckos, Correlophus ciliatus, asking whether the incline of the landing platform alters impact forces and mid-air body movements. Using high-speed videography, we examined jumps from a horizontal take-off platform to horizontal, 45° and 90° landing platforms. Take-off velocity was greatest when geckos were jumping to a horizontal platform. Geckos did not modulate their body orientation in the air. Body curvature during landing, and landing duration, were greatest on the vertical platform. Together, these significantly reduced the impact force on the vertical platform. When landing on a smooth vertical surface, the geckos must engage the adhesive system to prevent slipping and falling. In contrast, landing on a horizontal surface requires no adhesion, but incurs high impact forces. Despite a lack of mid-air modulation, geckos appear robust to changing landing conditions.

Due to their special peel tissue, comprising a dense flavedo (exocarp), a less dense albedo (mesocarp), and a thin endocarp, most citrus fruits can withstand the drop from a tree or high shrub (relatively) undamaged. While most citrus fruit peels share this basic morphological setup, they differ in various structural and mechanical properties. This study analyzes how various properties in citrus peels of the pomelo, citron, lemon, grapefruit, and orange affect their compression behavior. We compare the structural and biomechanical properties (e.g., density, stress, Young’s modulus, Poisson’s ratio) of these peels and analyze which properties they share. Therefore, the peels were quasi-statically compressed to 50% compression and analyzed with manual and digital image correlation methods. Furthermore, local deformations were visualized, illustrating the inhomogeneous local strain patterns of the peels. The lateral strain of the peels was characterized by strain ratios and the Poisson’s ratio, which were close to zero or slightly negative for nearly all tested peels. Our findings prove that—despite significant differences in stress, magnitude, distribution, and thickness - the tested peels share a low Poisson’s ratio meaning that the general peel structures of citrus species offer a promising inspiration for the development of energy dissipating cellular structure that can be used for damage protection.

During evolution, plants have developed various functional principles for sealing and healing wounds. Prime examples are succulent leaves of Delosperma cooperi that seal external injuries within 60 min. Cross sections of intact leaves show a centripetal multilayer structure consisting of five tissues alternately under tensile and compressive prestress. Injuries destroy this mechanical equilibrium causing a deformation of the entire leaf until a new equilibrium is reached, and the wound edges meet, thereby sealing the fissure. Following this functional principle of D. cooperi leaves, a planar three‐layer materials system consisting of a sheet of shape memory polymer (SMP) with programmed temporary geometry sandwiched between two polydimethylsiloxane (PDMS) sheets is developed. After the individual sheets are bonded at room temperature, the application of heat treatment without mechanical constraints results in a prestressed multilayer system. The damage‐triggered bending behavior of the three‐layer system is described by means of an analytical model and feasibility tests establishing the self‐sealing functionality of the system. Thus, a biomimetic materials system with a self‐sealing function within the framework of a biomimetic biology push process is developed. However, the discussion herein has gone beyond the biological model, because the self‐sealing three‐layer materials system can additionally serve as an actuator.

Abstract During biological evolution, plants have developed a wide variety of body plans and concepts that enable them to adapt to changing environmental conditions. The trade-off between flexural and torsional rigidity is an important example of sometimes conflicting mechanical requirements, the adaptation to which can be quantified by the dimensionless twist-to-bend ratio. Our study considers the triangular flower stalk of Carex pendula, which shows the highest twist-to-bend ratios ever measured for herbaceous plant axes. For an in-depth understanding of this peak value, we have developed geometric models reflecting the 2D setting of triangular cross-sections comprised of a parenchymatous matrix with vascular bundles surrounded by an epidermis. We analysed the mathematical models (using finite elements) to measure the effect of either reinforcements of the epidermal tissue or fibre reinforcements such as collenchyma and sclerenchyma on the twist-to-bend ratio. The change from an epidermis to a covering tissue of corky periderm increases both the flexural and the torsional rigidity and decreases the twist-to-bend ratio. Furthermore, additional individual fibre reinforcement strands located in the periphery of the cross-section and embedded in a parenchymatous ground tissue lead to a strong increase of the flexural and a weaker increase of the torsional rigidity and thus resulted in a marked increase of the twist-to-bend ratio. Within the developed model, a reinforcement by 49 sclerenchyma fibre strands or 24 collenchyma fibre strands is optimal in order to achieve high twist-to-bend ratios. Dependent on the mechanical quality of the fibres, the twist-to-bend ratio of collenchyma-reinforced axes is noticeably smaller, with collenchyma having an elastic modulus that is approximately 20 times smaller than that of sclerenchyma. Based on our mathematical models, we can thus draw conclusions regarding the influence of mechanical requirements on the development of plant axis geometry, in particular the placement of reinforcements.

Pine cones show functionally highly resilient, hygroscopically actuated opening and closing movements, which are repeatable and function even in millions of years old, coalified cones. Although the functional morphology and biomechanics behind the individual seed scale motions are well understood, the initial opening of the cone, which is often accompanied by an audible cracking noise, is not. We therefore investigated the initial opening events of mature fresh cones of Scots pine (Pinus sylvestris) and their subsequent motion patterns. Using high-speed and time lapse videography, 3D digital image correlation techniques, force measurements, thermographic and chemical-rheological resin analyses, we are able to draw a holistic picture of the initial opening process involving the rupture of resin seals and very fast seed scale motion in the millisecond regime. The rapid cone opening was not accompanied by immediate seed release in our experiments and, therefore, cannot be assigned to ballistochory. As the involved passive hydraulic-elastic processes in cracking are very fine-tuned, we hypothesize that they are under tight mechanical-structural control to ensure an ecologically optimized seed release upon environmental conditions suitable for wind dispersal. In this context, we propose an interplay of humidity and temperature to be the external “drivers” for the initial cone opening, in which resin works as a crucial chemical-mechanical latch system.

Glaucoma is a group of optic neuropathies characterized by the progressive degeneration of retinal ganglion cells (RGCs) as well as their axons leading to irreversible loss of sight. Medical management of the intraocular pressure (IOP) still represents the gold standard in glaucoma therapy, which only manages a single risk factor and does not directly address the neurodegenerative component of this eye disease. Recently, our group showed that antibody-derived immunopeptides (encoding complementarity-determining regions, CDRs) provide attractive glaucoma medication candidates and directly interfere its pathogenic mechanisms by different modes of action. In accordance with these findings, the present study showed the synthetic complementary-determining region 2 (CDR2) peptide (INSDGSSTSYADSVK) significantly increased RGC viability in vitro in a concentration-dependent manner (p < 0.05 using a CDR2 concentration of 50 μg/mL). Employing state-of the-art immunoprecipitation experiments, we confirmed that synthetic CDR2 exhibited a high affinity toward the retinal target protein histone H3.1 (HIST1H3A) (p < 0.001 and log2-fold change > 3). Furthermore, molecular dynamics (MD) simulations along with virtual docking analyses predicted potential CDR2-specific binding regions of HIST1H3A, which might represent essential post-translational modification (PTM) sites for epigenetic regulations. Quantitative mass spectrometry (MS) analysis of retinas demonstrated 39 proteins significantly affected by CDR2 treatment (p < 0.05). An up-regulation of proteins involved in the energy production (e.g., ATP5F1B and MT-CO2) as well as the regulatory ubiquitin proteasome system (e.g., PSMC5) was induced by the synthetic CDR2 peptide. On the other hand, CDR2 reduced metabolic key enzymes (e.g., DDAH1 and MAOB) as well as ER stress-related proteins (e.g., SEC22B and VCP) and these data were partially confirmed by microarray technology. Our outcome measurements indicate that specific protein-peptide interactions influence the regulatory epigenetic function of HIST1H3A promoting the neuroprotective mechanism on RGCs in vitro. In addition to IOP management, such synthetic peptides as CDR2 might serve as a synergistic immunotherapy for glaucoma in the future.

Species with various reproductive modes accompanied by different mechanical properties of their (lateral) branch-branch junctions have evolved in the cactus subfamily Opuntioideae. Older branches of Opuntia ficus-indica with fracture-resistant junctions often bear flowers and fruits for sexual reproduction, whereas younger branches break off easily and provide offshoots for vegetative propagation. Cylindropuntia bigelovii plants are known for their vegetative reproduction via easily detachable branches that can establish themselves as offshoots. We characterized the elastic and fracture behaviors of these lateral junctions by tensile testing and analyzed local strains during loading. Additionally, we carried out finite element analyses to quantify the influence of five relevant tissue layers on joint elastic behavior. Our fracture analysis revealed various fracture modes: (i) most young samples of Opuntia ficus-indica failed directly at the junction and had smooth fracture surfaces, and relative fracture strain was on median 4% of the total strain; (ii) most older samples of Opuntia ficus-indica failed at the adjacent branch and exhibited rough fracture surfaces, and relative fracture strain was on median 47%; (iii) most samples of Cylindropuntia bigelovii abscised directly at the junction and exhibited cup and cone surfaces, and relative fracture strain was on median 28%. Various geometric and mechanical properties such as junction area, fracture energy, and tensile strength were analyzed with respect to significant differences between species and age of sample. Interestingly, the abscission of lateral branches naturally triggered by wind, passing animals, or vibration showed the following differences in maximum force: 153 N (older Opuntia ficus-indica), 51 N (young Opuntia ficus-indica), and 14 N (Cylindropuntia bigelovii).

The evolutionary roots of carnivory in the Venus flytrap (Dionaea muscipula) stem from a defense response to plant injury caused by, e.g., herbivores. Dionaea muscipula aka. Darwin’s most wonderful plant underwent extensive modification of leaves into snap-traps specialized for prey capture. Even the tiny seedlings of the Venus flytrap already produce fully functional, millimeter-sized traps. The trap size increases as the plant matures, enabling capture of larger prey. The movement of snap-traps is very fast (~100–300 ms) and is actuated by a combination of changes in the hydrostatic pressure of the leaf tissue with the release of prestress (embedded energy), triggering a snap-through of the trap lobes. This instability phenomenon is facilitated by the double curvature of the trap lobes. In contrast, trap reopening is a slower process dependent on trap size and morphology, heavily reliant on turgor and/or cell growth. Once a prey item is caught, the trap reconfigures its shape, seals itself off and forms a digestive cavity allowing the plant to release an enzymatic cocktail to draw nutrition from its captive. Interestingly, a failed attempt to capture prey can come at a heavy cost: the trap can break during reopening, thus losing its functionality. In this mini-review, we provide a detailed account of morphological adaptations and biomechanical processes involved in the trap movement during D. muscipula hunting cycle, and discuss possible reasons for and consequences of trap breakage. We also provide a brief introduction to the biological aspects underlying plant motion and their evolutionary background.

The first botanical gardens in Europe were established for the study of medicinal, poisonous, and herbal plants by students of medicine or pharmacy at universities. As the natural sciences became increasingly important in the 19th Century, botanical gardens additionally took on the role of public educational institutions. Since then, learning from living nature with the aim of developing technical applications, namely biomimetics, has played a special role in botanical gardens. Sir Joseph Paxton designed rainwater drainage channels in the roof of the Crystal Palace for the London World’s Fair in 1881, having been inspired by the South American giant water lily (Victoria amazonica). The development of the Lotus-Effect® at the Botanical Garden Bonn was inspired by the self-cleaning leaf surfaces of the sacred lotus (Nelumbo nucifera). At the Botanic Garden Freiburg, a self-sealing foam coating for pneumatic systems was developed based on the self-sealing of the liana stems of the genus Aristolochia. Currently, botanical gardens are both research institutions and places of lifelong learning. Numerous botanical gardens provide biomimetics trails with information panels at each station for self-study and guided biomimetics tours with simple experiments to demonstrate the functional principles transferred from the biological model to the technical application. We present eight information panels suitable for setting up education about biomimetics and simple experiments to support guided garden tours about biomimetics.

Biomimetics (bionics, bioinspired technology) refers to research on living systems and attempts to transfer their properties to engineering applications [...]

Glaucoma is a complex, multifactorial optic neuropathy mainly characterized by the progressive loss of retinal ganglion cells (RGCs) and their axons, resulting in a decline of visual function. The pathogenic molecular mechanism of glaucoma is still not well understood, and therapeutic strategies specifically addressing the neurodegenerative component of this ocular disease are urgently needed. Novel immunotherapeutics might overcome this problem by targeting specific molecular structures in the retina and providing direct neuroprotection via different modes of action. Within the scope of this research, the present study showed for the first time beneficial effects of the synthetic CDR1 peptide SCTGTSSDVGGYNYVSWYQ on the viability of RGCs ex vivo in a concentration-dependent manner compared to untreated control explants (CTRL, 50 µg/mL: p < 0.05 and 100 µg/mL: p < 0.001). Thereby, this specific peptide was identified first as a potential biomarker candidate in the serum of glaucoma patients and was significantly lower expressed in systemic IgG molecules compared to healthy control subjects. Furthermore, MS-based co-immunoprecipitation experiments confirmed the specific interaction of synthetic CDR1 with retinal acidic leucine-rich nuclear phosphoprotein 32A (ANP32A; p < 0.001 and log2 fold change > 3), which is a highly expressed protein in neurological tissues with multifactorial biological functions. In silico binding prediction analysis revealed the N-terminal leucine-rich repeat (LRR) domain of ANP32A as a significant binding site for synthetic CDR1, which was previously reported as an important docking site for protein-protein interactions (PPI). In accordance with these findings, quantitative proteomic analysis of the retinae ± CDR1 treatment resulted in the identification of 25 protein markers, which were significantly differentially distributed between both experimental groups (CTRL and CDR1, p < 0.05). Particularly, acetyl-CoA biosynthesis I-related enzymes (e.g., DLAT and PDHA1), as well as cytoskeleton-regulating proteins (e.g., MSN), were highly expressed by synthetic CDR1 treatment in the retina; on the contrary, direct ANP32A-interacting proteins (e.g., NME1 and PPP2R4), as well as neurodegenerative-related markers (e.g., CEND1), were identified with significant lower abundancy in the CDR1-treated retinae compared to CTRL. Furthermore, retinal protein phosphorylation and histone acetylation were also affected by synthetic CDR1, which are both partially controlled by ANP32A. In conclusion, the synthetic CDR1 peptide provides a great translational potential for the treatment of glaucoma in the future by eliciting its neuroprotective mechanism via specific interaction with ANP32A’s N terminal LRR domain.

Extrusion-based 4D-printing, which is an emerging field within additive manufacturing, has enabled the technical transfer of bioinspired self-shaping mechanisms by emulating the functional morphology of motile plant structures (e.g., leaves, petals, capsules). However, restricted by the layer-by-layer extrusion process, much of the resulting works are simplified abstractions of the pinecone scale’s bilayer structure. This paper presents a new method of 4D-printing by rotating the printed axis of the bilayers, which enables the design and fabrication of self-shaping monomaterial systems in cross sections. This research introduces a computational workflow for programming, simulating, and 4D-printing differentiated cross sections with multilayered mechanical properties. Taking inspiration from the large-flowered butterwort (Pinguicula grandiflora), which shows the formation of depressions on its trap leaves upon contact with prey, we investigate the depression formation of bioinspired 4D-printed test structures by varying each depth layer. Cross-sectional 4D-printing expands the design space of bioinspired bilayer mechanisms beyond the XY plane, allows more control in tuning their self-shaping properties, and paves the way toward large-scale 4D-printed structures with high-resolution programmability.

Abstract The opening and closing of pine cones is based on the hygroscopic behavior of the individual seed scales around the cone axis, which bend passively in response to changes in environmental humidity. Although prior studies suggest a bilayer architecture consisting of lower actuating (swellable) sclereid and upper restrictive (non‐ or lesser swellable) sclerenchymatous fiber tissue layers to be the structural basis of this behavior, the exact mechanism of how humidity changes are translated into global movement are still unclear. Here, the mechanical and hydraulic properties of each structural component of the scale are investigated to get a holistic picture of their functional interplay. Measurements of the wetting behavior, water uptake, and mechanical measurements are used to analyze the influence of hydration on the different tissues of the cone scales. Furthermore, their dimensional changes during actuation are measured by comparative micro‐computed tomography (µ‐CT) investigations of dry and wet scales, which are corroborated and extended by 3D‐digital image correlation‐based displacement and strain analyses, biomechanical testing of actuation force, and finite element simulations. Altogether, a model allowing a detailed mechanistic understanding of pine cone actuation is developed, which is a prime concept generator for the development of biomimetic hygromorphic systems.

Faced with the environmental challenges posed by climate change, architects are creating nature-based solutions for urban areas, such as transforming living trees into artificial architectural structures. In this study, we have analyzed stem pairs of five tree species conjoined for more than eight years by measuring the stem diameters below and above the resulting inosculation and by calculating the respective diameter ratio. Our statistical analyses reveal that Platanus × hispanica and Salix alba stems do not differ significantly in diameter below inosculation. However, in contrast to P. × hispanica, the diameters of the conjoined stems above inosculation differ significantly in S. alba. We provide a binary decision tree based on diameter comparisons above and below inosculation as a straightforward tool for identifying the likelihood of full inosculation with water exchange. Moreover, we have compared branch junctions and inosculations by means of anatomical analyses, micro-computed tomography, and 3D reconstructions showing similarities in the formation of common annual rings that increase the capacity for water exchange. Due to the highly irregular cell arrangement in the center of the inosculations, cells cannot be assigned clearly to either of the stems. In contrast, cells in the center of branch junctions can always be attributed to one of the branches.

From a mechanical viewpoint, petioles of foliage leaves are subject to contradictory mechanical requirements. High flexural rigidity guarantees support of the lamina and low torsional rigidity ensures streamlining of the leaves in wind. This mechanical trade-off between flexural and torsional rigidity is described by the twist-to-bend ratio. The safety factor describes the maximum load capacity. We selected four herbaceous species with different body plans (monocotyledonous, dicotyledonous) and spatial configurations of petiole and lamina (2-dimensional, 3-dimensional) and carried out morphological-anatomical studies, two-point bending tests and torsional tests on the petioles to analyze the influence of geometry, size and shape on their twist-to-bend ratio and safety factor. The monocotyledons studied had significantly higher twist-to-bend ratios (23.7 and 39.2) than the dicotyledons (11.5 and 13.3). High twist-to-bend ratios can be geometry-based, which is true for the U-profile of Hosta x tardiana with a ratio of axial second moment of area to torsion constant of over 1.0. High twist-to-bend ratios can also be material-based, as found for the petioles of Caladium bicolor with a ratio of bending elastic modulus and torsional modulus of 64. The safety factors range between 1.7 and 2.9, meaning that each petiole can support about double to triple the leaf’s weight.

The European mistletoe (Viscum album) is a dioecious epiphytic evergreen hemiparasite that develops an extensive endophyte enabling the absorption of water and mineral salts from the host tree, whereas the exophytic leaves are photosynthetically active. The attachment mode and host penetration are well studied, but little information is available about the effects of mistletoe age and sex on haustorium-host interactions. We harvested 130 plants of Viscum album ssp. album growing on host branches of Aesculus flava for morphological and anatomical investigations. Morphometric analyses of the mistletoe and the (hypertrophied) host interaction site were correlated with mistletoe age and sex. We recorded the morphology of the endophytic systems of various ages by using X-ray microtomography scans and corresponding stereomicroscopic images. For detailed anatomical studies, we examined thin stained sections of the mistletoe-host interface by light microscopy. The diameter and length of the branch hypertrophy showed a positive linear correlation with the age of the mistletoe. Correlations with their sex were only found for ratios between host branch and hypertrophy size. A female bias of about 76% was found. In a 4-year-old mistletoe, several small, almost equally sized sinkers and the connected cortical strands extend over more than 5 cm within the host branch. In older mistletoes, one main sinker was predominant and occupied an increasingly large proportion of the stem cross-section. Bands of vessels ran along the axis of the wedge-shaped haustoria and sinkers and bent sideways toward the mistletoe-host interface. At the interface, the vascular elements of the host wood changed their direction and formed vortices near the haustorium.

Abstract Here we report on a pilot study of the Living Root Bridges (LRBs) in the Indian State Meghalaya, which are grown with aerial roots of Ficus elastica, a facultative hemiepiphyte developing abundant aerial roots. Locals use these aerial roots to build living bridges, which strengthen themselves over time due to adaptive secondary growth and their capacity to form a mechanically stable structure via inosculations. An extensive inventory of LRBs in Meghalaya including data of location, altitude, approximate age and bridge length was performed in field studies. Root morphology was characterised by measurements of cross-sectional area and shape-related parameters and analysed in relation to the orientation of the roots. LRBs are found to occur mainly in the mountainous limestone rainforests where F. elastica may be native or traditionally cultivated. They cover an altitude range of 57–1211 m a.m.s.l. and display a length of 2 to 52.7 m. Some bridges are several hundreds of years old. Horizontally and vertically trained roots differ significantly in shape and cross-sectional area when approximately even-aged roots are compared. The results are discussed from an interdisciplinary perspective, considering the adaptive traits in the natural life cycle of F. elastica and possible applications in living architecture (Baubotanik).

Abstract This paper presents a material programming approach for designing 4D‐printed self‐shaping material systems based on biological role models. Plants have inspired numerous adaptive systems that move without using any operating energy; however, these systems are typically designed and fabricated in the form of simplified bilayers. This work introduces computational design methods for 4D‐printing bio‐inspired behaviors with compounded mechanisms. To emulate the anisotropic arrangement of motile plant structures, material systems are tailored at the mesoscale using extrusion‐based 3D‐printing. The methodology is demonstrated by transferring the principle of force generation by a twining plant (Dioscorea bulbifera) to the application of a self‐tightening splint. Through the tensioning of its stem helix, D. bulbifera exhibits a squeezing force on its support to provide stability against gravity. The functional strategies of D. bulbifera are abstracted and translated to customized 4D‐printed material systems. The squeezing forces of these bio‐inspired motion mechanisms are then evaluated. Finally, the function of self‐tightening is prototyped in a wrist‐forearm splint—a common orthotic device for alignment. The presented approach enables the transfer of novel and expanded biomimetic design strategies to 4D‐printed motion mechanisms, further opening the design space to new types of adaptive creations for wearable assistive technologies and beyond.

The field of plant-inspired robotics is based on principles underlying the movements and attachment and adaptability strategies of plants, which together with their materials systems serve as concept generators. The transference of the functions and underlying structural principles of plants thus enables the development of novel life-like technical materials systems. For example, principles involved in the hinge-less movements of carnivorous snap-trap plants and climbing plants can be used in technical applications. A combination of the snap-trap motion of two plant species (Aldrovanda vesiculosa and Dionaea muscipula) has led to the creation of a novel motion sequence for plant-inspired robotics in an artificial Venus flytrap system, the Venus Flyflap. The novel motion pattern of Venus Flyflap lobes has been characterized by using four state-of-the-art actuation systems. A kinematic analysis of the individual phases of the new motion cycle has been performed by utilizing precise pneumatic actuation. Contactless magnetic actuation augments lobe motion into energy-efficient resonance-like oscillatory motion. The use of environmentally driven actuator materials has allowed autonomous motion generation via changes in environmental conditions. Measurement of the energy required for the differently actuated movements has shown that the Venus Flyflap is not only faster than the biological models in its closing movement, but also requires less energy in certain cases for the execution of this movement.

Comprising ca. 28,000, species the Orchidaceae constitute one of the most species-rich plant families. Orchids differ from other monocotyledons i.a., in the formation of so-called pollinaria, which are entities consisting of pollen grains aggregated into compact pollinia and accessory structures, a viscidium and mostly also a pollinium stalk. The viscidium releases an adhesive material that attaches the pollinarium to a pollinator. Pollinaria are part of a complex pollination apparatus that enables the orchids to colonize niches in which only a few individuals of the respective pollinator occur infrequently. Because the aggregated pollen grains are removed from the flower at once, the development of a mechanical barrier ensuring that only suitable pollinators are able to access the flowers and more importantly to remove the pollen are important selective traits. In this paper we describe the functional morphology of the pollination apparatus in two orchid species, Oncidium wentworthianum and O. otogaya, by experimentally mimicking the pollination process. Furthermore, we analyzed the mechanical resistance of this apparatus by means of force measurements and showed that it most probably constitutes a hierarchical two-stage barrier. The first stage consists of the presence of the anther cap that not only protects the pollinia, but also serves to prevent premature removal of young and unripe pollinaria from the flower. As soon as the pollinaria are ripe, the anther cap sheds and the second stage of the mechanical barrier takes effect, a severable bond between pollinarium and rostellum. This bond can be overcome by a potential pollinator, applying a load of at least 10.8 mN (O. otogaya) or 12.6 mN (O. wentworthianum), respectively, on the viscidium which at the same time disengages the pollinarium from its anchorage. The adhesive material produced by the viscidium creates sufficient adhesive contact between pollinarium and pollinator. Potential pollinators, such as Centris spp. or Trigona spp. bees, should be well able to exert such forces by pushing their head/forebody into the orchid flowers. Thus, whether a pollinator is able to detach the pollinarium depends on both how forcefully it can push and how strongly it can pull the orchid pollination apparatus.

Cuticular ridges on plant surfaces can control insect adhesion and wetting behaviour and might also offer stability to underlying cells during growth. The growth of the plant cuticle and its underlying cells possibly results in changes in the morphology of cuticular ridges and may also affect their function. We present spatial and temporal patterns in cuticular ridge development on the leaf surfaces of the model plant, Hevea brasiliensis. We have identified, by confocal laser scanning microscopy of polymer leaf replicas, an acropetally directed progression of ridges during the ontogeny of Hevea brasiliensis leaf surfaces. The use of Colorado potato beetles (Leptinotarsa decemlineata) as a model insect species has shown that the changing dimensions of cuticular ridges on plant leaves during ontogeny have a significant impact on insect traction forces and act as an effective indirect defence mechanism. The traction forces of walking insects are significantly lower on mature leaf surfaces compared with young leaf surfaces. The measured walking traction forces exhibit a strong negative correlation with the dimensions of the cuticular ridges.

Fracture mechanics and form-structure-function relationships were studied in the hierarchically structured endocarp of the coconut (Cocos nucifera). We mechanically tested various endocarp sample types: (1) whole endocarp; (2) arch-shaped samples prepared from the endocarp in either an equatorial or a meridional orientation; (3) small endocarp samples. The last-mentioned were tested either in their naturally grown state or with both surfaces ground coplanarly. Samples were either compression- or impact-loaded in various orientations and/or diverse setup configurations (constrained vs. un-constrained).The results establish (1) that the orientation of the whole endocarp has no significant effect on the fracture force, (2) that the orientation of arch-shaped samples affects fracture behaviour, whereas (3) test velocity does not and (4) that the compressive strength of rectangular samples is highest when applied normal to the endocarp surface.Thus, on a comparatively small scale, the endocarp is a transversely isotropic material, whereas on a larger scale, the ellipsoidal shape of the coconut compensates for weaknesses introduced by the main vascular bundles. Coconut shells are therefore good examples of the way in which potential disadvantages that concern stability and that arise from biological necessities and evolutionary constraints can be counteracted by clever material arrangements and designs.

Applications in remote inspection and medicine have motivated the recent development of innovative thin, flexible-backboned robots. However, such robots often experience difficulties in maintaining their intended posture under gravitational and other external loadings. Thin-stemmed climbing plants face many of the same problems. One highly effective solution adopted by such plants features the use of tendrils and tendril-like structures, or the intertwining of several individual stems to form braid-like structures. In this paper, we present new plant-inspired robotic tendril-bearing and intertwining stem hardware and corresponding novel attachment strategies for thin continuum robots. These contributions to robotics are motivated by new insights into plant tendril and intertwining mechanics and behavior. The practical applications of the resulting GrowBots is discussed in the context of space exploration and mining operations.

Presented in this article are 2D and 3D graphical datasets in the form of micrographs and tomograms that were obtained as part of a systematic microstructural characterization by scanning electron microscopy and X-ray microtomography to illustrate freeze-cast bamboo-inspired tubular scaffolds with functional gradients (“Bamboo-inspired Tubular Scaffolds with Functional Gradients” [1]). Four material combinations of the coaxial ‘core-shell’ molds and their two end pieces were used to freeze cast highly porous tubes (Tube/Rod/Holder): ASA (Aluminum, 316 Stainless Steel, Aluminum), ASP (Aluminum, 316 Stainless Steel, Epoxy (Plastic)), SCA (316 Stainless Steel, Copper, Aluminum), and CSP (Copper, 316 Stainless Steel, Epoxy (Plastic)). Three techniques were used to coat the best performing CSP freeze-cast tubes: spray freezing (SF), spray coating (SC), and brush freezing (BF). The structure and density profile of the uncoated and coated tubes was quantified using X-ray microtomography and their functional gradients, and the resulting mechanical performance in bending were determined and compared. The structure-property-processing correlations determined for the coated and uncoated coaxially freeze cast tubular scaffolds offer strategies for the biomimetic design of bamboo-inspired porous tubes, which emulate bamboo's stiff outer shell supported by a porous, elastic inner layer to delay the onset of ovalization and failure, thereby increasing the tubes’ mechanical efficiency.

Bioinspired and biomimetic soft machines rely on functions and working principles that have been abstracted from biology but that have evolved over 3.5 billion years. So far, few examples from the huge pool of natural models have been examined and transferred to technical applications. Like living organisms, subsequent generations of soft machines will autonomously respond, sense, and adapt to the environment. Plants as concept generators remain relatively unexplored in biomimetic approaches to robotics and related technologies, despite being able to grow, and continuously adapt in response to environmental stimuli. In this research review, we highlight recent developments in plant-inspired soft machine systems based on movement principles. We focus on inspirations taken from fast active movements in the carnivorous Venus flytrap (Dionaea muscipula) and compare current developments in artificial Venus flytraps with their biological role model. The advantages and disadvantages of current systems are also analyzed and discussed, and a new state-of-the-art autonomous system is derived. Incorporation of the basic structural and functional principles of the Venus flytrap into novel autonomous applications in the field of robotics not only will inspire further plant-inspired biomimetic developments but might also advance contemporary plant-inspired robots, leading to fully autonomous systems utilizing bioinspired working concepts.

Domestic household appliances (e.g., washing machines) are major factors in the anthropogenic global energy balance, which is why an efficient control of their energy and material consumption are of great importance in the future. At the same time, most of today's washing machines can be considered as “black boxes” which lack dynamic analysis techniques for an automated and optimized resource management. Following a biomimetic approach, rapid prototyping methods are combined with high‐speed videography and 2D particle tracking. In addition, preliminary work on the functional morphology and hydrodynamic characteristics of the olfactory organ of Sphyrna tudes is utilized to generate a flow channel module suitable for the implementation of diverse state‐of‐the‐art sensor technologies into innovative washing machines. The module's fluid dynamics are essentially determined by its optimized channel geometry and the fluid's inflow velocity. Future investigations will reveal whether a precise change of individual hydrodynamic parameters can solely be achieved by a variation of the inflow velocity and whether specific flow profiles can be established to allow for dynamic online analytics of multiple sensors during washing.

This study analyzes the impact behavior of lemon peel (Citrus × limon) and investigates its functional morphology compared with the anatomy of pomelo peel (Citrusmaxima). Both fruit peels consist mainly of parenchyma structured by a density gradient. In order to characterize the lemon peel, both energy dissipation and transmitted force are determined by conducting drop weight tests at different impact strengths (0.15–0.74 J). Fresh and freeze-dried samples were used to investigate the influence on the mechanics of peel tissue’s water content. The samples of lemon peel dissipate significantly more kinetic energy in the freeze-dried state than in the fresh state. Fresh lemon samples experience a higher impulse than freeze-dried samples at the same momentum. Drop weight tests results show that fresh lemon samples have a significantly longer impact duration and lower transmitted force than freeze-dried samples. With higher impact energy (0.74 J) the impact behavior becomes more plastic, and a greater fraction of the kinetic energy is dissipated. Lemon peel has pronounced energy dissipation properties, even though the peel is relatively thin and lemon fruits are comparably light. The cell arrangement of citrus peel tissue can serve as a model for bio-inspired, functional graded materials in technical foams with high energy dissipation.

Bacteria communicate and organize via quorum sensing which is determined by biochemical processes. Here the authors aim to reproduce this behaviour in a system of synthetic active particles whose motion is induced by an external beam which is in turn controlled by a feedback-loop which mimics quorum sensing.

During evolution, plants evolved various reactions to wounding. Fast wound sealing and subsequent healing represent a selective advantage of particular importance for plants growing in arid habitats. An effective self-sealing function by internal deformation has been found in the succulent leaves of Delosperma cooperi. After a transversal incision, the entire leaf bends until the wound is closed. Our results indicate that the underlying sealing principle is a combination of hydraulic shrinking and swelling as the main driving forces and growth-induced mechanical pre-stresses in the tissues. Hydraulic effects were measured in terms of the relative bending angle over 55 minutes under various humidity conditions. The higher the relative air humidity, the lower the bending angle. Negative bending angles were found when a droplet of liquid water was applied to the wound. The statistical analysis revealed highly significant differences of the single main effects such as “humidity conditions in the wound region” and “time after wounding” and their interaction effect. The centripetal arrangement of five tissue layers with various thicknesses and significantly different mechanical properties might play an additional role with regard to mechanically driven effects. Injury disturbs the mechanical equilibrium, with pre-stresses leading to internal deformation until a new equilibrium is reached. In the context of self-sealing by internal deformation, the highly flexible wide-band tracheids, which form a net of vascular bundles, are regarded as paedomorphic tracheids, which are specialised to prevent cell collapse under drought stress and allow for building growth-induced mechanical pre-stresses.

The Opuntioideae include iconic cacti whose lateral branch–branch junctions are intriguing objects from a mechanical viewpoint. We have compared Opuntia ficus-indica, which has stable branch connections, with Cylindropuntia bigelovii, whose side branches abscise under slight mechanical stress. To determine the underlying structures and mechanical characteristics of these stable versus shedding cacti junctions, we conducted magnetic resonance imaging, morphometric and anatomical analyses of the branches and tensile tests of individual tissues. The comparison revealed differences in geometry, shape and material properties as follows: (i) a more pronounced tapering of the cross-sectional area towards the junctions supports the abscission of young branches of C. bigelovii. (ii) Older branches of O. ficus-indica form, initially around the branch–branch junctions, collar-shaped periderm tissue. This secondary coverage mechanically stiffens the dermal tissue, giving a threefold increase in strength and a tenfold increase in the elastic modulus compared with the epidermis. (iii) An approximately 200-fold higher elastic modulus of the vascular bundles of O. ficus-indica is a prerequisite for the stable junction of its young branches. Our results provide, for both biological and engineered materials systems, important insights into the geometric characteristics and mechanical properties of branching joints that are either stable or easily detachable.

During the last few decades, biomimetics has attracted increasing attention in both basic and applied research and in various fields of industry and building construction [...]

Biomimetics is an interdisciplinary field of science that deals with the analysis and systematic transfer of biological insights into technical applications. Moreover, the development of biomimetic products helps to improve our understanding of biological concept generators (reverse biomimetics). What does this mean for the education of kindergarten children, pupils, students, teachers, and others interested in biomimetics? The challenge of biomimetics is to have a solid knowledge base in the scientific disciplines involved and the competency to be open-minded enough to develop innovative solutions. This apparently contradictory combination ensures the transfer of knowledge from biology to engineering and vice versa on the basis of a common language that is perfectly understandable to everyone, e.g., the language of models, algorithms, and complete mathematical formulations. The opportunity within biomimetics is its ability to arouse student interest in technology via the fascination inherent in biological solutions and to awaken enthusiasm for living nature via the understanding of technology. Collaboration in working groups promotes professional, social, and personal skills. The variety of biomimetics is mirrored by the large number of educational modules developed with respect to existing biomimetic products and methods.

Abstract We recorded capture events (CEs) of the daphniid Ceriodaphnia dubia by the carnivorous Southern bladderwort with suction traps (Utricularia australis). Independent to orientation and behavior during trap triggering, the animals were successfully captured within 9 ms on average and sucked in with velocities of up to 4 m/s and accelerations of up to 2800 g. Phases of very high acceleration during onsets of suction were immediately followed by phases of similarly high deceleration (max.: −1900 g) inside the bladders, leading to immobilization of the prey which then dies. We found that traps perform a ‘forward strike’ during suction and that almost completely air-filled traps are still able to perform suction. The trigger hairs on the trapdoors can undergo strong bending deformation, which we interpret to be a safety feature to prevent fracture. Our results highlight the elaborate nature of the Utricularia suction traps which are functionally resilient and leave prey animals virtually no chance to escape.

The abstraction and implementation of plant movement principles into biomimetic compliant systems are of increasing interest for technical applications, e.g., in architecture, medicine, and soft robotics. Within the respective research and development approaches, advanced methods such as 4D printing or 3D-braiding pultrusion are typically used to generate proof-of-concept demonstrators at the laboratory or demonstrator scale. However, such techniques are generally time-consuming, complicated, and cost-intensive, which often impede the rapid realization of a sufficient number of demonstrators for testing or teaching. Therefore, we have produced comparable simple handcrafted compliant systems based on paper, wood, plastic foil, and/or glue as construction materials. A variety of complex plant movement principles have been transferred into these low-cost physical demonstrators, which are self-actuated by shrinking processes induced by the anisotropic hygroscopic properties of wood or paper. The developed systems have a high potential for fast, precise, and low-cost abstraction and transfer processes in biomimetic approaches and for the “hands-on understanding” of plant movements in applied university and school courses.

Since most plant movements take place through an interplay of elastic deformation and strengthening tissues, they are thus ideal concept generators for biomimetic hingeless actuators. In the framework of a biomimetic biology push process, we present the transfer of the functional movement principles of hollow tubular geometries that are surrounded by a net-like structure. Our plant models are the recent genera Ochroma (balsa) and Carica (papaya) as well as the fossil seed fern Lyginopteris oldhamia, which hold a net of macroscopic fiber structures enveloping the whole trunk. Asymmetries in these fiber nets, which are specifically caused by asymmetric growth of the secondary wood, enable the up-righting of inclined Ochroma and Carica stems. In a tubular net-like structure, the fiber angles play a crucial role in stress–strain relationships. When braided tubes are subjected to internal pressure, they become shorter and thicker if the fiber angle is greater than 54.7°. However, if the fiber angle is less than 54.7°, they become longer and thinner. In this article, we use straightforward functional demonstrators to show how insights into functional principles from living nature can be transferred into plant-inspired actuators with linear or asymmetric deformation.

Although both the petiole and lamina of foliage leaves have been thoroughly studied, the transition zone between them has often been overlooked. We aimed to identify objectively measurable morphological and anatomical criteria for a generally valid definition of the petiole–lamina transition zone by comparing foliage leaves with various body plans (monocotyledons vs. dicotyledons) and spatial arrangements of petiole and lamina (two-dimensional vs. three-dimensional configurations). Cross-sectional geometry and tissue arrangement of petioles and transition zones were investigated via serial thin-sections and µCT. The changes in the cross-sectional geometries from the petiole to the transition zone and the course of the vascular bundles in the transition zone apparently depend on the spatial arrangement, while the arrangement of the vascular bundles in the petioles depends on the body plan. We found an exponential acropetal increase in the cross-sectional area and axial and polar second moments of area to be the defining characteristic of all transition zones studied, regardless of body plan or spatial arrangement. In conclusion, a variety of terms is used in the literature for describing the region between petiole and lamina. We prefer the term “petiole–lamina transition zone” to underline its three-dimensional nature and the integration of multiple gradients of geometry, shape, and size.

Background: The debate on the question whether biomimetics has a specific potential to contribute to sustainability is discussed among scientists, business leaders, politicians and those responsible for project funding. The objective of this paper is to contribute to this controversial debate by presenting the sustainability assessment of one of the most well-known and most successful biomimetic products: the façade paint Lotusan®.Results: As a first step it has been examined and verified that the façade paint Lotusan® is correctly defined as a biomimetic product. Secondly, Lotusan® has been assessed and compared to a conventional façade paint within the course of a detailed product sustainability assessment (PROSA). For purposes of comparison, the façade paint Jumbosil® was chosen as reference for a conventional paint available on the market. The benefit analysis showed that both paints fulfil equally well the requirements of functional utility. With respect to the symbolic utility, Lotusan® has a particular added aesthetic value by the preservation of the optical quality over the life cycle. Within the social analysis no substantial differences between the two paints could be found regarding the handling and disposal of the final products. Regarding the life-cycle cost, Lotusan® is the more expensive product. However, the higher investment cost for a Lotusan®-based façade painting are more than compensated by the longer life time, resulting in both reduced overall material demand and lower labour cost. In terms of the life-cycle impact assessment, it can be ascertained that substantial differences between the paints arise from the respective service life, which are presented in terms of four scenario analyses.Conclusion: In summary, the biomimetic façade paint Lotusan® has been identified as a cost-effective and at the same time resource-saving product. Based on the underlying data and assumptions it could be demonstrated that Lotusan®-based façade paintings have a comparatively low overall impact on the environment. Summarizing our results, it can be emphasized that Lotusan® is the more favourable product compared to Jumbosil® according to sustainability aspects.

Main aims of the study are a deepened understanding of the mechanically relevant (ultra-)structures and the mechanical behaviour of various arborescent and shrubby monocotyledons and obtaining the structure–function relationships of different structurally conspicuous parts in Dracaena marginata stems. The stems of five different “woody” monocotyledon species were dissected and the mechanical properties of the most noticeable tissues in the five monocotyledons and, additionally, of individual vascular bundles in D. marginata, were tested under tensile stress. Results for Young’s moduli and density of these tissues were assessed as well as the area, critical strain, Young’s modulus and tensile strength of the vascular bundles in Dracaena marginata. These analyses allowed for generating a model for the mechanical interaction of tissues and vascular bundles of the stem in D. marginata as well as filling major “white spots” in property charts for biological materials. Additionally we shortly discuss the potential significance of such studies for the development of branched and unbranched bio-inspired fibre-reinforced materials and structures with enhanced properties.

Although the Venus flytrap (Dionaea muscipula) can be considered as one of the most extensively investigated carnivorous plants, knowledge is still scarce about diversity of the snap-trap motion, the functionality of snap traps under varying environmental conditions, and their opening motion. By conducting simple snap-trap closure experiments in air and under water, we present striking evidence that adult Dionaea snaps similarly fast in aerial and submersed states and, hence, is potentially able to gain nutrients from fast aquatic prey during seasonal inundation. We reveal three snapping modes of adult traps, all incorporating snap buckling, and show that millimeter-sized, much slower seedling traps do not yet incorporate such elastic instabilities. Moreover, opening kinematics of young and adult Dionaea snap traps reveal that reverse snap buckling is not performed, corroborating the assumption that growth takes place on certain trap lobe regions. Our findings are discussed in an evolutionary, biomechanical, functional–morphological and biomimetic context.