Search

Sub-1-nm gate length $MoS_2$ transistors have been experimentally fabricated, but their device performance limit remains elusive. Herein, we explore the performance limits of the sub-1-nm gate length monolayer (ML) $MoS_2$ transistors through ab initio quantum transport simulations. Our simulation results demonstrate that, through appropriate doping and dielectric engineering, the sub-1-nm devices can meet the requirement of extended 'ITRS'(International Technology Roadmap for Semiconductors) $L_g$=0.34 nm. Following device optimization, we achieve impressive maximum on-state current densities of 409 $\mu A / \mu m$ for n-type and 800 $\mu A / \mu m$ for p-type high-performance (HP) devices, while n-type and p-type low-power (LP) devices exhibit maximum on-state current densities of 75 $\mu A / \mu m$ and 187 $\mu A / \mu m$, respectively. We employed the Wentzel-Kramer-Brillouin (WKB) approximation to explain the physical mechanisms of underlap and spacer region optimization on transistor performance. The underlap and spacer regions primarily influence the transport properties of sub-1-nm transistors by respectively altering the width and body factor of the potential barriers. Compared to ML $MoS_2$ transistors with a 1 nm gate length, our sub-1-nm gate length HP and LP ML $MoS_2$ transistors exhibit lower energy-delay products. Hence the sub-1-nm gate length transistors have immense potential for driving the next generation of electronics.

Neuromorphic devices have gained significant attention as potential building blocks for the next generation of computing technologies owing to their ability to emulate the functionalities of biological nervous systems. The essential components in artificial neural network such as synapses and neurons are predominantly implemented by dedicated devices with specific functionalities. In this work, we present a gate-controlled transition of neuromorphic functions between artificial neurons and synapses in monolayer graphene transistors that can be employed as memtransistors or synaptic transistors as required. By harnessing the reliability of reversible electrochemical reactions between C atoms and hydrogen ions, the electric conductivity of graphene transistors can be effectively manipulated, resulting in high on/off resistance ratio, well-defined set/reset voltage, and prolonged retention time. Overall, the on-demand switching of neuromorphic functions in a single graphene transistor provides a promising opportunity to develop adaptive neural networks for the upcoming era of artificial intelligence and machine learning., Comment: 22 pages, 4 figures

Polar skyrmions have been widely investigated in oxide heterostructure recently, due to their exotic properties and intriguing physical insights. Meanwhile, so far, the external field-driven motion of the polar skyrmion, akin to the magnetic counterpart, has yet to be discovered. Here, using phase-field simulations, we demonstrate the dynamic motion of the polar skyrmions with integrated external thermal, electrical, and mechanical stimuli. The external heating reduces the spontaneous polarization hence the skyrmion motion barrier, while the skyrmions shrink under the electric field, which could weaken the lattice pinning and interactions between the skyrmions. The mechanical force transforms the skyrmions into c-domain in the vicinity of the indenter center under the electric field, providing the space and driving force needed for the skyrmions to move. This study confirmed that the skyrmions are quasi-particles that can move collectively, while also providing concrete guidance for the further design of polar skyrmion-based electronic devices., Comment: 17 pages, 4 figures

Two-dimensional material-based field effect transistors (2DM-FETs) are playing a revolutionary role in electronic devices. However, after years of development, no device model can match the Pao-Sah model for standard silicon-based transistors in terms of physical accuracy and computational efficiency to support large-scale integrated circuit design. One remaining critical obstacle is the contacts of 2DM-FETs. In order to self-consistently include the contact effect in the current model, it is necessary to perform self-consistent calculations, which is a fatal flaw for applications that prioritize efficiency. Here, we report that the Landauer-QFLPS model effectively overcomes the above contradiction, where QFLPS means quasi-Fermi-level phase space theory. By connecting the physical pictures of the contact and the intrinsic channel part, we have successfully derived a drain-source current formula including the contact effect. To verify the model, we prepared transistors based on two typical 2DMs, black phosphorus (BP) and molybdenum disulfide (MoS2), the former having ambipolar transport and the latter showing electron-dominant unipolar transport. The proposed new formula could describe both 2DM-FETs with Schottky or Ohmic contacts. Moreover, compared with traditional methods, the proposed model has the advantages of accuracy and efficiency, especially in describing non-monotonic drain conductance characteristics, because the contact effect is self-consistently and compactly packaged as an exponential term. More importantly, we also examined the model at the circuit level. Here, we fabricated a three-bit threshold inverter quantizer circuit based on ambipolar-BP process and experimentally demonstrated that the model can accurately predict the circuit performance. This industry-benign 2DM-FET model is supposed to be very useful for the development of 2DM-FET-based integrated circuits.

Two-dimensional materials-based field-effect transistors (2DM-FETs) exhibit both ambipolar and unipolar transport types. To physically and compactly cover both cases, we put forward a quasi-Fermi-level phase space (QFLPS) approach to model the ambipolar effect in our previous work. This work aims to further improve the QFLPS model's numerical aspect so that the model can be implanted into the standard circuit simulator. We first rigorously derive the integral-free formula for the drain-source current to achieve this goal. It is more friendly to computation than the integral form. Besides, it explicitly gives the correlation terms between the electron and hole components. Secondly, to work out the boundary values required by the new expressions, we develop a fast evaluation algorithm for the surface electrostatic potential based on the zero-temperature limit property of the 2DM-FET system. By calibrating the model with the realistic device data of black phosphorus (BP) and monolayer molybdenum disulfide (ML-MoS2) FETs, the completed algorithm is tested against practical cases. The results show a typical superiority to the benchmark algorithm by two orders of magnitude in time consumption can be achieved while keeping a high accuracy with 7 to 9 significant digits., Comment: 17 pages, 9 figures

The controllable phase transition and nanopatterning of topological states in a ferroelectric system under external stimuli are critical for realizing the potential applications in nanoelectronic devices such as logic, memory, race-track, etc. Herein, using the phase-field simulations, we demonstrate the mechanical manipulation of polar skyrmions in ferroelectric superlattices by applying external local compressive stress through an atomic force microscopy (AFM) tip. Different switching pathways are observed: under small to moderate force (<1 uN), the skyrmions coalesce to form a long stripe; while increasing the applied load (e.g., above 2 uN) leads to the suppression of spontaneous polarization, forming a new metastable topological structure, namely the post-skyrmion. It is constructed by attaching multiple merons onto a center Bloch skyrmion, showing a topological charge of 1.5 (under 2 uN) or 2 (under 3 uN). We have further designed a mechanical nanopatterning process, where the stripes can form a designed pattern by moving the AFM tip (write), which can also be switched back to a full skyrmion state under an applied electric field (erase). We believe this study will spur further interest in mechanical manipulation and nanopatterning of polar topological phases through mechanical forces., Comment: 24 pages, 4 figures

Complex oxide heterointerfaces can host a rich of emergent phenomena, and epitaxial growth is usually at the heart of forming these interfaces. Recently, a strong crystalline-orientation-dependent two-dimensional superconductivity was discovered at interfaces between KTaO3 single-crystal substrates and films of other oxides. Unexpectedly, rare of these oxide films was epitaxially grown. Here, we report the existence of superconductivity in epitaxially grown LaVO3/KTaO3(111) heterostructures, with a superconducting transition temperature of ~0.5 K. Meanwhile, no superconductivity was detected in the (001)- and (110)-orientated LaVO3/KTaO3 heterostructures down to 50 mK. Moreover, we find that for the LaVO3/KTaO3(111) interfaces to be conducting, an oxygen-deficient growth environment and a minimum LaVO3 thickness of ~0.8 nm (~ 2 unit cells) are needed., Comment: 5 figures, plus 6 supplementary figures