Search

Introduction: Fertility preservation (FP) offers cancer patients the opportunity to have biological children after completing treatment. This study was performed to review the experience and changes in service demand since the implementation of a public FP programme for cancer patients in Hong Kong., Methods: This retrospective study included men and women who attended an assisted reproduction unit for public FP services before cancer treatment from August 2020 to February 2023. Their medical records were reviewed and the results were compared with findings from our previous study to evaluate trends in service demand., Results: During the study period, there were 48 consultations for female FP, compared with 72 women who presented for FP from 2010 to 2020 prior to establishment of the public FP programme. The median time from referral to consultation was 3 days (interquartile range [IQR]=2-5). Eighteen women (37.5%) underwent 19 cycles of ovarian stimulation for oocyte or embryo cryopreservation. Thirty women (62.5%) received gonadotropin-releasing hormone agonists during cancer treatment. There were 58 consultations for male FP during the study period, compared with 265 men who presented for sperm cryopreservation from 2005 to 2020. The median time from referral to consultation was 4 days (IQR=2-7). Fifty-five men (94.8%) attempted sperm cryopreservation, and 49 (84.5%) successfully preserved sperm., Conclusion: Since the establishment of a public FP programme for cancer patients, there has been an increase in the demand for FP services at our centre. Regular review of FP services is warranted to assess changes in demand and identify areas for improvement., Competing Interests: All authors have disclosed no conflicts of interest.

Methanosarcina thermophila bioaugmentation on biochar as the growth support particle has previously been shown to enhance biomethane production of anaerobic digestion of food waste. In this paper, the duration of the beneficial effects is examined by a semi-continuous thermophilic regime starting from pooled digestate from a previous batch digestion. An additional experiment is performed to decouple the solids retention time, mitigating the washout effect and resulting in improved methane yield for 17 days. The second experiment is extended incorporating various permutations of biochar amendment, and the findings suggest that liquid soluble supplements are essential for prolonging the advantages. Experimental and microbiological analyses indicate that the biochar's enhancement is likely due to microbial factors like direct interspecies electron transfer (DIET) or syntrophic interactions, rather than physicochemical mechanisms., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The generation of food waste (FW) is increasing at an alarming rate, contributing to a total of 32% of all the waste produced globally. Anaerobic digestion (AD) is an effective method for dealing with organic wastes of various compositions, like FW. Waste valorization into value-added products has increased due to the conversion of FW into biogas using AD technology. A variety of pathways are adopted by microbes to avoid unfavorable conditions in AD, including competition between sulfate-reducing bacteria and methane (CH 4 )-forming bacteria. Anaerobic bacteria decompose organic matter to produce biogas, a digester gas. The composition depends on the type of raw material and the method by which the digestion process is conducted. Studies have shown that the biogas produced by AD contains 65-75% CH 4 and 35-45% carbon dioxide (CO 2 ). Methanothrix soehngenii and Methanosaeta concilii are examples of species that convert acetate to CH 4 and CO 2 . Methanobacterium bryantii , Methanobacterium thermoautotrophicum , and Methanobrevibacter arboriphilus are examples of species that produce CH 4 from hydrogen and CO 2 . Methanobacterium formicicum , Methanobrevibacter smithii , and Methanococcus voltae are examples of species that consume formate, hydrogen, and CO 2 and produce CH 4 . The popularity of AD has increased for the development of biorefinery because it is seen as a more environmentally acceptable alternative in comparison to physico-chemical techniques for resource and energy recovery. The review examines the possibility of using accessible FW to produce important value-added products such as organic acids (acetate/butyrate), biopolymers, and other essential value-added products.

As an important branch characteristic factor, the quantity of branches could influence crown structure, tree growth, and wood quality. Taking Larix kaempferi plantation in Dagujia Forest Farm, Qingyuan County, Liao-ning Province as the research object, we developed a mixed effect prediction model of the first-order branches quantity of L. kaempferi including sprouting branches based on the negative binomial distribution model, and a mixed effect prediction model of the first-order branches density of L. kaempferi including sprouting branches based on the negative exponential model. The results showed that the mixed effect model considering sample level as the random effect effectively decreased the heteroscedasticity and autocorrelation. The fitting goodness was better than the traditional model. The quantity of the first-order branches increased with increasing crown ratio. The mixed effect model with the basic model intercept of the first-order branches quantity as the random effect parameter was determined as the optimal model, with R a 2 =0.552 and the RMSE=7.242. As for the density of the first-order branches, the heteroscedasticity and autocorrelation were also reduced when the random effect was added. The density of the first-order increased with increasing crown ratio. The mixed effect model with the basic model intercept of the first-order branches density model and branch depth as random effects was determined as the optimal model, with R a 2 =0.792 and the RMSE=4.447. The model for branch quantity and density of L. kaempferi constructed would lay an important foundation for making scientific forest management plans and improving wood quality.

Acid accumulation and carbon emission are two major challenges in anaerobic digestion. Syntrophic consortia can employ reverse electron transfer (RET) to facilitate thermodynamically unfavorable redox reactions during acetogenesis. However, the potential mechanisms and regulatory methods of RET remain unclear. This study examines the regulatory mechanisms by which exogenous CO 2 affects RET and demonstrates that biochar maximizes CO 2 solubility at 25.8 mmol/L to enhance effects further. CO 2 synergized with biochar significantly increases cumulative methane production and propionate degradation rate. From the bioenergetic perspective, CO 2 decreases energy level to a maximum of -87 kJ/mol, strengthening the thermodynamic viability. The underlying mechanism can be attributed to RET promotion, as indicated by increased formate dehydrogenase and enrichment of H 2 /formate-producing bacteria with their partner Methanospirillum hungatei. Moreover, the 5 % 13 CH 4 and methane contribution result show that CO 2 accomplishes directed methanogenesis. Overall, this investigation riches the roles of CO 2 and biochar in AD surrounding RET., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The industrialization of hydrogen production through dark fermentation of food waste faces challenges, such as low yields and unpredictable fermentation processes. Biochar has emerged as a promising green additive to enhance hydrogen production in dark fermentation. Our study demonstrated that the introduction of Fe-modified biochar (Fe-L600) significantly boosted hydrogen production during thermophilic dark fermentation of food waste. The addition of Fe-L600 led to a remarkable 31.19% increase in hydrogen yield and shortened the time needed for achieving stabilization of hydrogen production from 18 h to 12 h. The metabolite analysis revealed an enhancement in the butyric acid pathway as the molar ratio of acetic acid to butyric acid decreased from 3.09 to 2.69 but hydrogen yield increased from 57.12 ± 1.48 to 76.78 ± 2.77 mL/g, indicating Fe-L600 improved hydrogen yield by regulating crucial metabolic pathways of hydrogen production. The addition of Fe-L600 also promoted the release of Fe 2+ and Fe 3+ and increased the concentrations of Fe 2+ and Fe 3+ in the fermentation system, which might promote the activity of hydrogenase and ferredoxin. Microbial community analysis indicated a substantial increase in the relative abundance of Thermoanaerobacterium after thermophilic dark fermentation. The relative abundances of microorganisms responsible for hydrolysis and acidogenesis were also observed to be improved in the system with Fe-L600 addition. This research provides a feasible strategy for improving hydrogen production of food waste and deepens the understanding of the mechanisms of biochar., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Utilizing digestate as a fertilizer enhances soil nutrient content, improves fertility, and minimizes nutrient runoff, mitigating water pollution risks. This alternative approach replaces commercial fertilizers, thereby reducing their environmental impact and lowering greenhouse gas emissions associated with fertilizer production and landfilling. Herein, this study aimed to evaluate the impact of various soil amendments, including carbon fractions from waste materials (biochar, compost, and cocopeat), and food waste anaerobic digestate application methods on tomato plant growth (Solanum lycopersicum) and soil fertility. The results suggested that incorporating soil amendments (biochar, compost, and cocopeat) into the potting mix alongside digestate application significantly enhances crop yields, with increases ranging from 12.8 to 17.3% compared to treatments without digestate. Moreover, the combination of soil-biochar amendment and digestate application suggested notable improvements in nitrogen levels by 20.3% and phosphorus levels by 14%, surpassing the performance of the those without digestate. Microbial analysis revealed that the soil-biochar amendment significantly enhanced biological nitrification processes, leading to higher nitrogen levels compared to soil-compost and soil-cocopeat amendments, suggesting potential nitrogen availability enhancement within the rhizosphere's ecological system. Chlorophyll content analysis suggested a significant 6.91% increase with biochar and digestate inclusion in the soil, compared to the treatments without digestate. These findings underscore the substantial potential of crop cultivation using soil-biochar amendments in conjunction with organic fertilization through food waste anaerobic digestate, establishing a waste-to-food recycling system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Waste-to-energy technologies play a crucial role in integrated waste management strategies to reduce waste mass and volume, disinfect the waste, and recover energy; different technologies have advantages and disadvantages in treating municipal solid waste under urban conditions. This paper applies the extended exergy accounting method to develop an analytical framework to identify the optimal waste-to-energy strategy from an urban ecosystem holistic sustainability perspective. In the analytical framework, urban ecosystem costs and revenues are formulated as a multi-criteria cost-benefit quantitative model. The urban ecosystem cost is divided into five categories, and the urban ecosystem revenues consist of direct and indirect parts. The direct part is the chemical exergy of the waste-to-energy plants produced product, and the indirect part includes equivalent exergy content of power generation substitution, human health risk elimination, disamenity impact removal and environmental degradation avoidance. Proposing an indicator system to evaluate the waste-to-energy strategy impact on the sustainability of the urban ecosystems and social, economic and environmental sub-ecosystem. Detailed analysis of food waste treatment scenarios of a food center in Singapore was done as a case study to illustrate this analytical framework. Base scenario is current practice that food waste disposal in incineration plant. Anaerobic digestion and gasification are proposed as potential technological solutions for on-site food waste treatment in scenario I and II respectively. In different scenarios, the urban ecosystem costs are estimated to be 71,536.01, 61,854.87 and 74,190.34MJ/year respectively, and the urban ecosystem revenues are estimated to be 135,312.66, 405,442.53 and 298,426.81MJ/year respectively. We show that the scenario where food waste is treated by anaerobic digestion outperforms both the base scenario and scenario II in terms of urban ecosystem costs and revenues, technical energy conversion efficiency, contribution to urban ecosystem holistic sustainability, and natural, social, and economic subsystems improvement, making it the optimal municipal solid waste-to-energy strategy choice., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

This study employed life cycle assessment and cost-benefit analysis to evaluate the environmental and economic profile of a real decentralized small-scale anaerobic digestion (AD) system treating food waste (FW). Different operational conditions, including temperature, biochar addition, biogas engine efficiency, and FW loading, were compared via scenario analysis. Biochar addition could potentially obtain carbon reduction and save fossil fuel. Moreover, at high FW loading and biogas engine efficiency, biochar addition achieved 1-3190% better performance than the system without biochar in all the nine impact categories. The system under mesophilic conditions performed worse than ambient conditions due to high energy demand. All the current scenarios resulted in a monetary loss at US$ 480 k-681 k, while profit was possible if the capital cost and operator salary decreased significantly. Overall, operating the small-scale AD system under ambient temperature with biochar addition was preferred due to its potential environmental benefits and economic profits., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Food waste (FW) has become a worldwide issue, while anaerobic digestion (AD) has appeared as a widely adopted technology to recover energy and resources from FW. Compared to many existing case studies of centralized AD system, the comprehensive study of decentralized micro-AD system from both system energy efficiency and carbon emission perspective is still scanty, particularly system operated under ambient temperature conditions. In this study, an actual decentralized micro-AD system with treating capacity of 300 kg FW/d for a local hawker center in Singapore was reported and evaluated. The results showed that 1894.5 kg of FW was treated and 173 m 3 biogas with methane content of 53 % was produced during the experimental period of 75 days. The methane yield results showed a high FW degradation efficiency (87.87 %). However, net energy consumption and net carbon emission were observed during the experimental period. Nevertheless, energy self-efficiency and carbon neutrality, even net energy output and carbon reduction, can be achieved by increasing daily FW loading and biogas engine efficiency. Specifically, the FW loading for system energy self-efficiency was identified as 159 kg/d for engine efficiency of 35 % at a high kitchen waste/table waste ratio (63 %/37 %, with covid-19 dine-in restrictions); while they were 112 and 58 kg/d for engine efficiency of 25 % and 35 %, respective, at a low kitchen waste/table waste ratio (31 %/69 %, without covid-19 dine-in restrictions). The carbon emission ranged from 156.08 kg CO 2 -eq/t FW to -77.35 kg CO 2 -eq/t FW depending on the FW loading quantity and engine efficiency. Moreover, the sensitivity analysis also showed that the used electricity source for substitution influenced the carbon emission performance significantly. The obtained results imply that the decentralized micro-AD system could be a feasible FW management solution for energy generation and carbon reduction when the FW loading and engine electrical efficiency are carefully addressed., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Periosteum-derived progenitor cells (PDPCs) are highly promising cell sources that are indispensable in the bone healing process. Adipose-derived stem cells (ADSCs) are physiologically close to periosteum tissue and release multiple growth factors to promote the bone healing process. Co-culturing PDPCs and ADSCs can construct periosteum-bone tissue microenvironments for the study of cellular crosstalk and molecular signal in the bone healing process. In the current work, a paper-based osteogenesis-on-a-chip platform was successfully developed to provide an in vitro three-dimensional coculture model. The platform was a paper substrate sandwiched between PDPC-hydrogel and ADSC-hydrogel suspensions. Cell secretion could be transferred through the paper substrate from one side to another side. Growth factors including BMP2, TGF-β, POSTN, Wnt proteins, PDGFA, and VEGFA were directly analyzed by a paper-based immunoassay. Cellular crosstalk was studied by protein expression on the paper substrate. Moreover, osteogenesis of PDPCs was investigated by examining the mRNA expressions of PDPCs after culture. Neutralizing and competitive assays were conducted to understand the correlation between growth factors secreted from ADSCs and the osteogenesis of PDPCs. In vitro periosteum-bone tissue microenvironment was established by the paper-based osteogenesis-on-a-chip platform. The proposed approach provides a promising assay of cellular crosstalk and molecular signal in 3D coculture microenvironment that may potentially lead to the development of effective bone regeneration therapy.

Phosphorus plays a crucial role in modern society but often pollutes the environment through raising eutrophication and has particularly devastating effects on the water environment. As a promising material platform, the three-dimensional network structure and the tailorable nature of hydrogels provide infinite application possibilities. Thereinto, phosphate removal and recovery from wastewater using hydrogel materials have gained momentum since their rapid reactivity, ease of operation, low cost and simplicity of recovery compared to traditional techniques. In this review, current strategies for functional enhancement of hydrogel materials are systematically summarized from different perspectives. Following, based on the discussion of different interaction mechanisms between phosphates and hydrogels, the phosphate mass transfer and performance of hydrogels and their current application are critically reviewed. This review aims to present mechanistic insight into the recent development in phosphate removal and recovery using hydrogel materials and provides new ideas for constructing high-efficient hydrogels and laying the foundations for the practical application of this technology., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The increasing amount of food waste and the excessive use of mineral fertilizers have caused detrimental impacts on soil, water, and air quality. Though digestate derived from food waste has been reported to partially replace fertilizer, its efficiency requires further improvement. In this study, the effects of digestate-encapsulated biochar were comprehensively investigated based on growth of an ornamental plant, soil characteristics, nutrient leaching and soil microbiome. Results showed that except for biochar, the tested fertilizers and soil additives, i.e., digestate, compost, commercial fertilizer, digestate-encapsulated biochar had positive effects on plants. Especially, the digestate-encapsulated biochar had the best effectiveness as evidenced by 9-25% increase in chlorophyll content index, fresh weight, leaf area and blossom frequency. For the effects of fertilizers or soil additives on soil characteristics and nutrient retention, the digestate-encapsulated biochar leached least N-nutrients (<8%), while the compost, digestate and mineral fertilizer leached up to 25% N-nutrients. All the treatments had minimal effects on the soil properties of pH and electrical conductivity. According to the microbial analysis, the digestate-encapsulated biochar has the comparable role with compost in improving the soil immune system against pathogen infection. The metagenomics coupling with qPCR analysis suggested that digestate-encapsulated biochar boosted the nitrification process and inhibited the denitrification process. This study provides an extensive understanding into the impacts of the digestate-encapsulated biochar on an ornamental plant and offers practical implications for the choice of sustainable fertilizers or soil additives and food-waste digestate management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: To evaluate the association of serum advanced glycation end-products (AGEs) and its soluble receptor of AGE (sRAGE) levels with dysglycaemia and metabolic syndrome in women with polycystic ovary syndrome (PCOS)., Methods: This was an analysis of a cohort of women with PCOS who were prospectively recruited for a longitudinal observational study on their endocrine and metabolic profile between January 2010 and December 2013. The association of serum AGEs and sRAGE levels with dysglycaemia and metabolic syndrome at the second-year visit (the index visit) and the sixth-year visit (the outcome visit) were determined. Comparisons of continuous variables between groups were made using the Mann-Whitney U-test. Spearman test was used for correlation analysis. Multivariate binary logistic regression analysis was employed to identify the factors independently associated with the outcome events., Results: A total of 329 women were analysed at the index visit. Significantly lower serum levels of sRAGE (both p < 0.001), but no significant difference in AGEs, were observed in those with dysglycaemia or metabolic syndrome. At the outcome visit, those with incident metabolic syndrome had a significantly lower initial serum sRAGE levels (p = 0.008). The association of serum sRAGE with dysglycaemia and metabolic syndrome at the index visit was no longer significant in multivariate logistic regression after controlling for body mass index, free androgen index and homeostatic model assessment for insulin resistance (HOMA-IR). sRAGE was also not significantly associated with incident metabolic syndrome at the outcome visit on multivariate logistic regression., Conclusions: Serum sRAGE levels are significantly lower in women with PCOS who have dysglycaemia or metabolic syndrome, and in those developing incident metabolic syndrome in four years. However, it does not have a significant independent association with these outcome measures after adjusting for body mass index, free androgen index and HOMA-IR., (© 2023. The Author(s).)

Bioprinting is a precise layer-by-layer manufacturing technology utilizing biomaterials, cells, and sometimes growth factors for the fabrication of customized three-dimensional (3D) biological constructs. In recent years, it has gained considerable interest in various biomedical studies. However, the translational application of bioprinting is currently impeded by the lack in efficient techniques for blood vessel fabrications. In this report, by systematically studying the previously reported phenomenon, interfacial polyelectrolyte complexation, an efficient blood vessel bioprinting technique based on the phenomenon, was proposed and subsequently investigated. In this technique, anionic hyaluronate and cationic lysine-based peptide amphiphiles were placed concentrically to bioprint with human umbilical endothelial cells for the fabrication of biological tubular constructs. These constructs demonstrated clear vascular features, which made them highly resemble blood vessels. In addition, to optimize the bioactivity of the printed constructs, this report also, for the first time, studied peptide sequencing's effect on the biocompatibility of the polyelectrolyte-peptide amphiphile complex. All these studies conducted in the report are highly relevant and interesting for research in vascular structure fabrication, which will eventually be beneficial for translational application development of bioprinting.

The aim of this work was to evaluate the feasibility of treating food waste generated from a hawker centre in a pilot-scale anaerobic digester operating on site in an urban area of Singapore. For this purpose, a 10.4 m 3 digester was housed within two 20 feet containerized systems and sited adjacent to the hawker centre. The system reported in this work was during the startup phase, for over 71 days of real and varying food wastes loading rate. The results demonstrated that the decentralized system had an average specific methane yield of 0.55 ± 0.04 m 3 CH4 /kg VS , with methane concentrations of 56.6 ± 2.3%. For the power generation output, the energy assessment revealed an average of 2.05 ± 0.57 m 3 /kW h consumption rate. Accordingly, on the last day of startup phase, the inoculum of the digester was richer in organisms from the phylum Thermoplasmatota, i.e., genera Candidatus&#95;Methanogranum and Candidatus&#95;Methanoplasma, alongside with other dominant abundance from phyla Bacteroidota, Firmicutes, Synergistota, and Verrucomicrobiota. This study provides new insights into pilot scale decentralized anaerobic digestion with varying food waste relate to the characterizations of digester microbial communities, as well as turning in a typical integrated anaerobic digestion of food waste-to-energy system a reality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Environmental sources of chromium (Cr) such as solid waste, battery chemicals, industrial /waste, automotive exhaust emissions, mineral mining, fertilizers, and pesticides, have detrimental effects on plants. An excessive amount of Cr exposure can lead to toxic accumulations in human, animal, and plant tissues. In plants, diverse signaling molecules like hydrogen sulfide (H 2 S) and nitric oxide (NO) play multiple roles during Cr stress. Consequently, the molecular mechanisms of Cr toxicity in plants, such as metal binding, modifying enzyme activity, and damaging cells are examined by several studies. The reactive oxygen species (ROS) that are formed when Cr reacts with lipids, membranes, DNA, proteins, and carbohydrates are all responsible for damage caused by Cr. ROS regulate plant growth, programmed cell death (PCD), cell cycle, pathogen defense, systemic communication, abiotic stress responses, and growth. Plants accumulate Cr mostly through the root system, with very little movement to the shoots. The characterization of stress-inducible proteins and metabolites involved in Cr tolerance and cross-talk messengers has been made possible due to recent advances in metabolomics, transcriptomics, and proteomics. This review discusses Cr absorption, translocation, subcellular distribution, and cross-talk between secondary messengers as mechanisms responsible for Cr toxicity and tolerance in plants. To mitigate this problem, soil-plant systems need to be monitored for the biogeochemical behavior of Cr and the identification of secondary messengers in plants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Biorefinery systems are playing pivotal roles in the technological support of resource efficiency for circular bioeconomy. Meanwhile, artificial intelligence presents great potential in handling scientific tasks of high-dimensional complexity. This review article scrutinizes the status of machine learning (ML) applications in four critical biorefinery systems (i.e. composting, fermentation, anaerobic digestion, and thermochemical conversions) as well as their advancements against traditional modeling techniques of mechanistic approach. The contents cover their algorithm selections, modeling challenges, and prospective improvements. Perspectives are sketched to further inform collective efforts on crucial aspects. The multidisciplinary interchange of modeling knowledge will enable a more progressive digital transformation of sustainability efforts in supporting sustainable development goals., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) have become a major concern to human health and the environment due to rapid industrialization and urbanization. Traditional treatment measures for removing toxic substances from the environment have largely failed, and thus development and advancement in newer remediation techniques are of utmost importance. Rising environmental pollution with HMs and PAHs prompted the research on microbes and the development of genetically engineered microbes (GEMs) for reducing pollution via the bioremediation process. The enzymes produced from a variety of microbes can effectively treat a range of pollutants, but evolutionary trends revealed that various emerging pollutants are resistant to microbial or enzymatic degradation. Naturally, existing microbes can be engineered using various techniques including, gene engineering, directed evolution, protein engineering, media engineering, strain engineering, cell wall modifications, rationale hybrid design, and encapsulation or immobilization process. The immobilization of microbes and enzymes using a variety of nanomaterials, membranes, and supports with high specificity toward the emerging pollutants is also an effective strategy to capture and treat the pollutants. The current review focuses on successful bioremediation techniques and approaches that make use of GEMs or engineered enzymes. Such engineered microbes are more potent than natural strains and have greater degradative capacities, as well as rapid adaptation to various pollutants as substrates or co-metabolizers. The future for the implementation of genetic engineering to produce such organisms for the benefit of the environment andpublic health is indeed long and valuable., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Crown width is a critical variable in reflecting the individual tree growth status and in developing forest growth and yield models. With the crown width base model as reference, we developed the crown width quantile regression models for different quantiles (0.50, 0.90, 0.93, 0.95, 0.96, 0.99) based on the data of 2763 Korean pines in 66 permanent plots from the 10-55 years old plantations in Dabiangou forest farm, mountainous areas of eastern Liaoning Province. We used the reparameterization method by introducing the single tree competition index ( R d ) and used the dummy variable method by introducing stand density and forest layer variables. We then selected optimal quantile of maximum crown width in the stand by comparing our model developed routine to the traditional methods. The final crown width linear mixed effect quantile regression model was developed based on the optimal quantile at the plot level. The influence of each variable on crown width was analyzed to reflect the difference of crown width among individual trees in the stand. The models with different stand densities and forest layers had significant difference based on F statistical test: the R a 2 of the model increased by 0.0104, the root mean square error decreased by 0.0115 and the mean square error reduction was 7.4%, after the variables of forest layer, forest density, and competition being incorporated into the basic model. The developed quantile regression model performed better than that of the ordinary least square method in simulating the maximum crown width of a single tree in the forest stand. The selected best quantile of the quantile regression model for the upper forest layer and lower forest layer was 0.96 and 0.93, respectively. The linear quantile regression model with the mixed effect was superior to the traditional quantile regression model in Akaike, Bayesion and HQ information criterion and other evaluation para-meters, the standard error for the parameters of estimates was significantly reduced, and the introduced mixed effect well explained differences among different plots. For the upper forest layer and lower forest layer, the maximum crown width decreased with increasing stand density, increased with increasing relative diameters. The influence of stand density on the crown width of the lower forest layer was greater than that of the upper forest layer. The crown width would increase first and then decrease with the increases of DBH when the stand density was large enough. The mixed effect of the quantile regression model developed here could significantly improve the fitting stability of the model. The sustainable development of Korean pine plantation in the mountainous area of eastern Liaoning Pro-vince should be realized by adjusting stand density and moderate tending and thinning in the future.

Both biochar supplementation as well as bioaugmentation have been shown in literature to improve the methane yield of anaerobic digestion. In this study, the combination of both are evaluated by growing Methanosarcina thermophila on biochar support particles prior to augmentation of thermophilic food waste anaerobic digestion. Biochar stand alone, bioaugmentation solely, a combination of both added separately or grown together, and utilizing polypropylene (PP) microplastics as growth support instead were all tested when starting up a thermophilic process from mesophilic inoculum. Methanosarcina thermophila and biochar supplementation displayed synergy, with 5% M. thermophila on 1 g/L biochar presenting a 32% increase in specific methane yield over the control. Double the bioaugmentation dosage/concentration was also trialled with a thermophilic inoculum, and 10% M. thermophila grown on 2 g/L biochar displayed the best results with a 20% increase specific methane yield from its control standard., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This study presents the effect of bioaugmentation of thermophilic anaerobic digestion of food waste with Methanosarcina thermophila grown on a wood-derived biochar. Two different supplementation regimes were tested, namely a single bioaugmentation (SBABC) in which 10% v/v of the microbes grown on biochar (1 g/L) is added at setup of the reactors, versus a routine bioaugmentation (RBABC) wherein the same amount of supplements were added over 10 feeding cycles. The optimally performing 'R' and 'S' reactors had increased methane yields by 37% and 32% over their respective controls while reactors SBABC 2 and 3 produced 21.89% and 56.09% higher average methane yield than RBABC 2 and 3, respectively. It appears that a single dose bioaugmentation is advantageous for improving AD as analysed in terms of average methane yield and VFA production. This study provides the basis for understanding how biochar and bioaugmentation can be used for engineering sustainable pilot-scale AD processes., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Contamination of the environment through toxic pollutants poses a key risk to the environment due to irreversible environmental damage(s). Industrialization and urbanization produced harmful elements such as petrochemicals, agrochemicals, pharmaceuticals, nanomaterials, and herbicides that are intentionally or unintentionally released into the water system, threatening biodiversity, the health of animals, and humans. Heavy metals (HMs) in water, for example, can exist in a variety of forms that are inclined by climate features like the presence of various types of organic matter, pH, water system hardness, transformation, and bioavailability. Biological treatment is an important tool for removing toxic contaminants from the ecosystem, and it has piqued the concern of investigators over the centuries. In situ bioremediation such as biosparging, bioventing, biostimulation, bioaugmentation, and phytoremediation and ex-situ bioremediation includes composting, land farming, biopiles, and bioreactors. In the last few years, scientific understanding of microbial relations with particular chemicals has aided in the protection of the environment. Despite intensive studies being carried out on the mitigation of toxic pollutants, there have been limited efforts performed to discuss the solutions to tackle the limitations and approaches for the remediation of heavy metals holistically. This paper summarizes the risk assessment of HMs on aquatic creatures, the environment, humans, and animals. The content of this paper highlights the principles and limitations of microbial remediation to address the technological challenges. The coming prospect and tasks of evaluating the impact of different treatment skills for pollutant remediation have been reviewed in detail. Moreover, genetically engineered microbes have emerged as powerful bioremediation capabilities with significant potential for expelling toxic elements. With appropriate examples, current challenging issues and boundaries related to the deployment of genetically engineered microbes as bioremediation on polluted soils are emphasized., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal that could have appeared to influence the work reported in this paper. All authors have read and agreed to the final version of the manuscript., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Non-degradable pollutants have emerged as a result of industrialization, population growth, and lifestyle changes, endangering human health and the environment. Bioremediation is the process of clearing hazardous contaminants with the help of microorganisms, and cost-effective approach. The low-cost and environmentally acceptable approach to removing environmental pollutants from ecosystems is microbial bioremediation. However, to execute these different bioremediation approaches successfully, this is imperative to have a complete understanding of the variables impacting the development, metabolism, dynamics, and native microbial communities' activity in polluted areas. The emergence of new technologies like next-generation sequencing, protein and metabolic profiling, and advanced bioinformatic tools have provided critical insights into microbial communities and underlying mechanisms in environmental contaminant bioremediation. These omics approaches are meta-genomics, meta-transcriptomics, meta-proteomics, and metabolomics. Moreover, the advancements in these technologies have greatly aided in determining the effectiveness and implementing microbiological bioremediation approaches. At Environmental Protection Agency (EPA)-The government placed special emphasis on exploring how molecular and "omic" technologies may be used to determine the nature, behavior, and functions of the intrinsic microbial communities present at pollution containment systems. Several omics techniques are unquestionably more informative and valuable in elucidating the mechanism of the process and identifying the essential player's involved enzymes and their regulatory elements. This review provides an overview and description of the omics platforms that have been described in recent reports on omics approaches in bioremediation and that demonstrate the effectiveness of integrated omics approaches and their novel future use., (Copyright © 2022 Elsevier Inc. All rights reserved.)

In the context of a circular economy, bioplastic production using biodegradable materials such as poly(3-hydroxybutyrate) (PHB) has been proposed as a promising solution to fundamentally solve the disposal issue of plastic waste. PHB production techniques through fermentation of PHB-accumulating microbes such as Cupriavidus necator have been revolutionized over the past several years with the development of new strategies such as metabolic engineering. This review comprehensively summarizes the latest PHB production technologies via Cupriavidus necator fermentation. The mechanism of the biosynthesis pathway for PHB production was first assessed. PHB production efficiencies of common carbon sources, including food waste, lignocellulosic materials, glycerol, and carbon dioxide, were then summarized and critically analyzed. The key findings in enhancing strategies for PHB production in recent years, including pre-treatment methods, nutrient limitations, feeding optimization strategies, and metabolism engineering strategies, were summarized. Furthermore, technical challenges and future prospects of strategies for enhanced production efficiencies of PHB were also highlighted. Based on the overview of the current enhancing technologies, more pilot-scale and larger-scale tests are essential for future implementation of enhancing strategies in full-scale biogas plants. Critical analyses of various enhancing strategies would facilitate the establishment of more sustainable microbial fermentation systems for better waste management and greater efficiency of PHB production., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Zhang, Jiang, Tsui, Loh, Dai and Tong.)

With emerging decarbonization to deploy more integrated waste management, there is a burgeoning need for re-managing waste-related infrastructures in urban environments. Wastewater treatment plants are key contributors to expanded environmental services, but relevant technological decisions and economic tradeoffs have to be assessed from a systems perspective. This study provides a methodological framework that consolidates the multiple technological and economic aspects of system retrofitting for such an evaluation purpose. Complex leachate from refuse transfer stations has been recently identified as the decarbonization roadblock of urban waste management, and it was chosen for investigations by this new methodological approach. The system impacts by complex leachate on the existing facilities were validated by experimental trials. To derive the financial outlooks for decision making, the evaluation matrix includes the quantitative impacts of bioenergy profiles, energy balance analysis of biogas utilization methods, needs of system retrofitting, economic factors, and their uncertainties. Due to the detected inefficiency of bioenergy recovery, bioinformatic analysis was proceeded for understanding the underlying mechanism to propose a mitigation solution. Overall, the methodological framework can provide a quantitative assessment of the centralized capability of wastewater treatment plants for systems planning in the new policy agenda of urban decarbonization, where the methodological potentials of expanded framework applications are also highlighted., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Due to rapid economic development and urbanisation, emerging megacities with dense populations have witnessed a significant increase in waste generation. Megacities face challenges in developing sustainable waste management systems. Considerable heterogeneity exists across megacities in management strategies. The two selected emerging megacities, Singapore (a city-state) and Shanghai, have similar developmental characteristics, but their waste management modes differ strikingly. This study assessed the two modes in terms of management strategies, environmental effects, economic costs, and social outcomes. Environmental footprint analysis and cost quantification were employed for the assessment based on public data. The research results would permit a deeper understanding of the long-term sustainability of each mode while considering the feasibility of implementation across different contexts. It was found that the waste management system in Singapore had a relatively lower environmental impact than Shanghai before Shanghai's new waste segregation and recycling policy in 2019. However, when the effect of fossil fuel substitution is taken into account, the environmental burden in Shanghai can be lowered more substantially than the one in Singapore. Although Shanghai had more economic burden for the waste segregation at source, it tended to implement the circular economy principles (e.g., reduce, reuse, and recycling) better and improve its sense of community significantly. Based on the practical experiences from the two representative megacities, suggestions for better waste management practices were provided for Singapore, Shanghai, and other emerging megacities with similar circumstances. In addition, challenges and opportunities related to household waste segregation and recycling were identified to guide future practices in emerging megacities., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Nano-biochar application was investigated for anaerobic digestion of orange peel waste. The application for methane production focused on the optimization of biochar feedstock, rescue of failed digesters, and microbial succession analysis. It showed that sewage sludge (SS) derived biochar had the highest performance enhancement among the different feedstocks, which could be ascribed to the improvement of electron transfer, interspecies hydrogen transfer, and supply of trace elements. Subsequently, nano SS biochar-amended digestate was evaluated for rescuing failed digesters, and the experimental results indicated its positive roles through gradual bioaugmentation operation. The dynamic analysis of microbial succession indicated the successful application was through the mechanism of restoring partially the functional microbial communities. The major reconstruction of functional microorganisms included bacteria phyla Hydrogenispora (24.5%) and Defluviitoga (18.8%) as well as methanogenic genera of Methanosarcina (41.5%) and Methanobacterium (27.3%). These findings would contribute to rescuing failed anaerobic digesters by bioaugmentation with biochar-amended digestate., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The effects of different recovery strategies on inhibited anaerobic digestion (AD) of food waste (FW) was examined in this study, with the finding that dosing pine woodchip biochar could reverse the effect of volatile fatty acids (VFA) inhibition (mainly propionic acid) and yielded 105.55% more methane than the control. The addition of nano-zerovalent iron (nZVI) promoted the generation of VFA while causing a slight inhibition of the methanogens initially. In due time, the nZVI digester was able to recover and eventually produced 192.22% more methane compared to the control. Finally, nZVI-modified biochar was proved to be able to avoid the inhibitory effects brought about by the nanoparticles. The results indicated reduced dosage requirements as compared to using pristine pine woodchip biochar and accumulated 204.84% more methane than the control. The introduction of nZVI-biochar also promoted the growth of Methanosarcina species methanogens, which can perform direct-interspecies electron transfer. While all the recovery strategies using the additives were feasible, the results suggested that the use of modified biochar holds great potential as a significantly lower amount of amendment is required for the recovery of the inhibited AD system., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Background: The mechanism of action of a contraceptive method is an importantg consideration in a woman's choice of contraception. For the development of new methods of contraception it is important to understand the acceptability of different contraceptive mechanisms within a population., Methods: We recruited women attending contraceptive, termination of pregnancy or postnatal care services in Hong Kong for a questionnaire survey on their acceptability of the different ways in which contraceptive methods prevent pregnancy. Univariable and multivariable analyses were used to establish factors which may predict acceptability of the mechanism of action., Results: A total of 1448 women completed the survey. The acceptability of contraceptive methods that act by preventing fertilisation ranked highest (78%), followed by those that inhibit ovulation (52%), disrupt implantation (43%) and dislodge an implanted embryo (30%). A history of termination of pregnancy was associated with greater acceptance of all posited contraceptive mechanisms. There was a very low degree of agreement between the declared acceptance of the various contraceptive mechanisms and the ever use of a method with the respective mechanism of action (Cohen's kappa coefficient range 0.017-0.162)., Conclusions: In this population the acceptability of contraceptive methods that act by preventing fertilisation ranked highest, followed by those that inhibit ovulation, disrupt implantation and dislodge an implanted embryo. Women who had ever had a termination of pregnancy were more likely to accept all the posited contraceptive mechanisms., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2022. No commercial re-use. See rights and permissions. Published by BMJ.)

Sustainable development serves as the foundation for a range of international and national policymaking. Traditional breeding methods have been used to modify plant genomes and production. Genetic engineering is the practice of assisting agricultural systems in adapting to rapidly changing global growth by hastening the breeding of new varieties. On the other hand, the development of genetic engineering has enabled more precise control over the genomic alterations made in recent decades. Genetic changes from one species can now be introduced into a completely unrelated species, increasing agricultural output or making certain elements easier to manufacture. Harvest plants and soil microorganisms are just a few of the more well-known genetically modified creatures. Researchers assess current studies and illustrate the possibility of genetically modified organisms (GMOs) from the perspectives of various stakeholders. GMOs increase yields, reduce costs, and reduce agriculture's terrestrial and ecological footprint. Modern technology benefits innovators, farmers, and consumers alike. Agricultural biotechnology has numerous applications, each with its own set of potential consequences. This will be able to reach its full potential if more people have access to technology and excessive regulation is avoided. This paper covers the regulations for genetically modified crops (GMCs) as well as the economic implications. It also includes sections on biodiversity and environmental impact, as well as GMCs applications. This recounts biotechnological interventions for long-term sustainability in the field of GMCs, as well as the challenges and opportunities in this field of research. Abbreviations: GMCs-Genetically modified crops; GMOs- Genetically modified organisms; GE- Genetic engineering; Bt- Bacillus thuringiensis NIH- National Institutes of Health; FDA- Food and Drug Administration; HGT- Horizontal gene transfer; GM- Genetically modified; rDNA- Ribosomal deoxyribonucleic acid; USDA- United States Department of Agriculture; NIH- National Institutes of Health.

To manage the mixture of food waste and plastic waste, a hybrid biological and thermal system was investigated for converting plastic-containing food waste (PCFW) into renewable energy, focusing on performance evaluation, microbial community analysis, and energy balance assessment. The results showed that anaerobic digestion (AD) of food waste, polyethylene (PE)-containing food waste, polystyrene (PS)-containing food waste, and polypropylene (PP)-containing food waste generated a methane yield of 520.8, 395.6, 504.2, and 479.8 mL CH 4 /gVS, respectively. CO 2 gasification of all the plastic-containing digestate produced more syngas than pure digestate gasification. Syngas from PS-digestate reached the maximum yield of 20.78 mol/kg. During the digestate-derived-biochar-amended AD of PCFW, the methane yields in the biochars-amended digesters were 6-30% higher than those of the control digesters. Bioinformatic analysis of microbial communities confirmed the significant difference between control and biochar-amended digesters in terms of bacterial and methanogenic compositions. The enhanced methane yields in biochars-amended digesters could be partially ascribed to the selective enrichment of genus Methanosarcina, leading to an improved equilibrium between hydrogenotrophic and acetoclastic methanogenesis pathways. Moreover, energy balance assessment demonstrated that the hybrid biological and thermal conversion system can be a promising technical option for the treatment of PCFW and recovery of renewable biofuels (i.e., biogas and syngas) and bioresource (i.e., biochar) on an industrial scale., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Industrial effluents/wastewater are the main sources of hexavalent chromium (Cr (VI)) pollutants in the environment. Cr (VI) pollution has become one of the world's most serious environmental concerns due to its long persistence in the environment and highly deadly nature in living organisms. To its widespread use in industries Cr (VI) is highly toxic and one of the most common environmental contaminants. Cr (VI) is frequently non-biodegradable in nature, which means it stays in the environment for a long time, pollutes the soil and water, and poses substantial health risks to humans and wildlife. In living things, the hexavalent form of Cr is carcinogenic, genotoxic, and mutagenic. Physico-chemical techniques currently used for Cr (VI) removal are not environmentally friendly and use a large number of chemicals. Microbes have many natural or acquired mechanisms to combat chromium toxicity, such as biosorption, reduction, subsequent efflux, or bioaccumulation. This review focuses on microbial responses to chromium toxicity and the potential for their use in environmental remediation. Moreover, the research problem and prospects for the future are discussed in order to fill these gaps and overcome the problem associated with bacterial bioremediation's real-time applicability.

The enhanced production of microbial lipids suitable for manufacturing biodiesel from oleaginous yeast Lipomyces starkeyi is critically reviewed. Recent advances in several aspects involving the biosynthetic pathways of lipids, current conversion efficiencies using various carbon sources, intensification strategies for improving lipid yield and productivity in L. starkeyi fermentation, and lipid extraction approaches are analyzed from about 100 papers for the past decade. Key findings on strategies are summarized, including (1) optimization of parameters, (2) cascading two-stage systems, (3) metabolic engineering strategies, (4) mutagenesis followed by selection, and (5) co-cultivation of yeast and algae. The current technical limitations are analyzed. Research suggestions like examination of more gene targets via metabolic engineering are proposed. This is the first comprehensive review on the latest technical advances in strategies from the perspective of process and metabolic engineering to further increase the lipid yield and productivity from L. starkeyi fermentation., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Anaerobic digestion produces large quantities of digestate as a by-product, which can potentially be applied as an organic fertilizer, but untreated anaerobic digestate (AD) may contain phytotoxins and the large volume of AD makes transportation and storage difficult. This study explored two relatively inexpensive processing methods to improve the agronomic performance of AD as a fertilizer via vegetable cultivation experiments. We first investigated the effect of dilution on AD's performance using four leafy vegetables (Chinese spinach, water spinach, Chinese cabbage and lettuce). The optimal concentrations of the AD were 20-40% (v/v in 250 mL applications per single-plant pot) for all four vegetables based on shoot fresh weight and comparable to the control treatment using commercial fertilizer. AD application also introduced Synergistetes bacteria into the growing medium, but the overall bacterial diversity and composition were similar to those of the control treatment. Considering the nutrient separation in the liquid and solid fractions of AD and the need to reduce the volume, we then experimented with the recovery of nutrients from both the liquid and solid fractions by filtering AD using two types of wood-based biochar (100 g biochar: 1 L AD) before applying the AD-biochar residues as side dressing at 1% (w/w). Both types of biochar achieved yields comparable to the treatment using a commercial fertilizer for the three vegetables tested (kale, lettuce and rocket salad). Our results show that dilution and biochar filtration can improve the agronomic performance of AD, making it a sustainable substitute for commercial fertilizer., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The aim of this work was to study the effects of plastics (high-density polyethylene (HDPE), polystyrene (PS), polypropylene (PP), and polyethylene terephthalate (PET)) on reactor performance and microbial communities during acidogenic fermentation of food waste for the production of volatile fatty acids (VFA). The addition of HDPE and PS increased total VFA yields by 28% and 47%, respectively, whereas the addition of PP and PET decreased total VFA yields by 6% and 2%, respectively. The highest enhancing performance of PS could be ascribed to its highly porous structure that could provide immobilization effects for microbial growth. Degradation of various plastics was confirmed by FESEM results, but the degrees were limited (i.e., 3.9-8.7%). Bacterial analysis showed that the addition of various plastics altered the community diversity. Phylum Thermotogae and genus Defluviitoga dominated all the reactors. Potential HDPE- and PS-degrading microbes could belong to genus Clostridium&#95;sensu&#95;stricto&#95;8, while Tepidanaerobacter&#95;syntrophicus could be PET-degrading microbes., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In this study, the anaerobic digestion (AD) applications of early & late biochar dosage were compared for municipal leachate treatment, with the objective of studying the flexible use of biochar as a mitigation measure for biomethane recovery. In two experimental phases, biochar was favourable for the immediate promotion of AD performances, as revealed by Gompertz's model of reduced lag phases, higher biomethane generation rates, and increased biomethane yields. Irrespective of late biochar dosage, it could still retrieve 89% of the ultimate biomethane potential. Comparing the residual VFAs (volatile fatty acids) compositions, it was found that the fraction of long-chain VFAs accounted for 81% of total VFAs in reactor set of early biochar dosage, while it was only 38% in the reactor of late one. Parallel evidence suggested that the schedule of biochar dosage not only could affect methanogenic responses but also the VFAs conversion pathways., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Sewage sludge treatment & disposal pose environmental challenges in populated-dense urban environments. Due to its poor digestibility and dewaterability, sewage sludge contains high water content and concentrated nutrients (carbon, nitrogen, and phosphorus) even after conditioning and mechanical thickening. Regarding this, a pretreatment step and downstream anaerobic digestion (AD) are often required. To meet our societal goal towards a circular economy, system integration of hydrothermal pretreatment and AD now present an attractive approach for recovering resources from the wet sewage sludge biomass. In this study, such system integration together with struvite precipitation was applied for valorizing sewage sludge. Firstly, hydrothermal conditions of different temperatures (160 °C-230 °C) and duration (2 h-12 h) were compared to their performance of nutrients solubilization. Subsequently, the hydrothermal condition of 220°C-3 h was selected for further investigations of struvite recovery and bioenergy production. Through AD comparisons, the integrated process improved the ultimate biomethane yield by 38%. Interestingly, a lag phase occurred in the midst of the AD, which indicated the need for microbial acclimatization after the hydrothermal process. The long-term microbial monitoring revealed the efficient biomethane re-generation was closely related to the late enrichment of Syntrophus for potential H 2 -syntrophy. Therefore, on one hand, this study investigated an efficient and integrated approach of sewage sludge valorization. On other hand, it uncovered the microbial bottlenecks and potential biotechnological means for further system improvement. Further research about nutrients speciation in the integrated system would be desired., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment., (Copyright © 2021 Elsevier B.V. All rights reserved.)

The high operating cost is currently a limitation to industrialize microbial lipids production by the yeast Lipomyces starkeyi . To explore economic fermentation technology, the two-stage fermentation of Lipomyces starkeyi using yeast extract peptone dextrose (YPD) medium, orange peel (OP) hydrolysate medium, and their mixed medium were investigated for seven days by monitoring OD 600 values, pH values, cell growth status, C/N ratios, total carbon concentration, total nitrogen concentration, residual sugar concentration, lipid content, lipid titer, and fatty acids profiles of lipids. The results showed that two-stage fermentation with YPD and 50% YPD + 50% OP medium contributed to lipid accumulation, leading to larger internal lipid droplets in the yeast cells. However, the cells in pure OP hydrolysate grew abnormally, showing skinny and angular shapes. Compared to the one-stage fermentation, the two-stage fermentation enhanced lipid contents by 18.5%, 27.1%, and 21.4% in the flasks with YPD medium, OP medium, and 50%YPD + 50%OP medium, and enhanced the lipid titer by 77.8%, 13.6%, and 63.0%, respectively. The microbial lipids obtained from both one-stage and two-stage fermentation showed no significant difference in fatty acid compositions, which were mainly dominated by palmitic acid (33.36-38.43%) and oleic acid (46.6-48.12%). Hence, a mixture of commercial medium and lignocellulosic biomass hydrolysate could be a promising option to balance the operating cost and lipid production.

This work studied the use of a horizontal high-solid digester for the decentralized anaerobic treatment of horticultural waste (fallen leaves), where the effect of intermittent mixing by a modified double helical ribbon impeller was investigated. Before experimental verification, the flow pattern and theoretical mixing time were first characterized by CFD simulation. Subsequently, three mixing time intervals (i.e., 3 min/3 hr; 18 min/3 hr; 108 min/3 hr) and one control setup (i.e., without mixing) were compared for their performance during start-up and semi-continuous operation. It was found that minimal mixing was necessary for an efficient digester's start-up but increased mixing intensity for semi-continuous operation. The results were further interpreted by correlating the digester performance and microbial communities. Those microorganisms sensitive to increased mixing intensity were highlighted and analysed., (Copyright © 2021 Elsevier Ltd. All rights reserved.)