Search

Yttrium-90 ( 90 Y) is one of the most widely used radionuclides in Nuclear Medicine practice. However, characteristic energy of this beta emitter constitutes a difficulty for dose planning using SPECT imaging. This work aimed to study bremsstrahlung X-rays effects produced by 90 Y beta particles during SPECT image acquisition using Monte Carlo code MCNPX. Several simulations were carried out to evaluate different aspects that could affect SPECT image quality, such as: collimator type, source-collimator distance and composition of each interacting material. Two configurations of 90 Y sources were simulated: a point source in several spheres of different materials (soft tissue, water, articular cartilage, and bone) and dimensions with radius ranging from 1 to 20 mm; and a uniformly distributed source in a Lucite cylindrical phantom filled with water. It was evaluated the bremsstrahlung photon emission generated inside different materials; for this was considered the number photons that passing through every different sphere's surface for each radii and material. In case of cylindrical phantom filled with water, in order to obtain the energy deposited over NaI (Tl) crystal detector; there was considered Median Energy General Purpose (MEGP) and Low Energy High Resolution (LEHR) collimators. Moreover, using TMESH routine available in the MCNPX Monte Carlo code, energy distribution images according to the collimator type and the source-collimator distance were obtained. The simulation was validated by comparing with the spectral distribution of the 90 Y bremsstrahlung X-rays obtained experimentally from an acrylic cylindrical phantom. Results corroborated the importance of Monte Carlo simulation method to evaluate a performance of SPECT image acquisition with 90 Y. The best resolution was obtained with MEGP collimator independent of source-collimator distance., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Radiosynoviorthesis (RSO) is a minimally invasive treatment aiming for the necrosis of the pannus tissue by the use of radionuclide. The method suggested here starts with the segmentation of the joint effusion, synovial thickness, and area of the synovial membrane using the 3D Slicer software. The last step is the estimated value of the activity to be injected without considering the leakage of the radiopharmaceutical into the articular cavity. It includes the S-values obtained by Monte Carlo simulation coupled with the calculated therapeutic distance (ST 90 )., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020. Published by Elsevier Ltd.)

Although there are several radionuclides suitable for radiosynoviorthesis (RSO), not all of them can irradiate deeper synovium. Yttrium-90 (Y) is the beta radionuclide with more penetration range; therefore, it is predominantly used to treat knees. The aim of this paper is to highlight several dosimetry concepts to compare Y and Sm, also discussing the feasibility of implementing a dose planning methodology for both in RSO. The MCNPX Monte Carlo nuclear code version 2.6 was used for calculating S-values from which the activity to be injected into the joint was obtained. This activity is considered sufficient to deliver a 100-Gy absorbed dose in 1 mm of synovial tissue. The simulated mathematical model consisted of a system formed by several cylindrical slabs of 1-mm thickness, aligned consecutively. The different areas of the cylinder base simulate several synovial membrane sizes. The effective treatment range for each radionuclide was also calculated. Quantification of the synovial joint features (synovial thickness and synovial surface) by diagnostic imaging, such as magnetic resonance (MRI) combined with a Monte Carlo simulation, can be used to achieve a treatment planning strategy in RSO with the available radionuclides.

Purpose: Recently, there has been a growing interest in a methodology for dose planning in radiosynoviorthesis to substitute fixed activity. Clinical practice based on fixed activity frequently does not embrace radiopharmaceutical dose optimization in patients. The aim of this paper is to propose and discuss a dose planning methodology considering the radiological findings of interest obtained by three-dimensional magnetic resonance imaging combined with Monte Carlo simulation in radiosynoviorthesis treatment applied to hemophilic arthropathy., Method: The parameters analyzed were: surface area of the synovial membrane (synovial size), synovial thickness and joint effusion obtained by 3D MRI of nine knees from nine patients on a SIEMENS AVANTO 1.5 T scanner using a knee coil. The 3D Slicer software performed both the semiautomatic segmentation and quantitation of these radiological findings. A Lucite phantom 3D MRI validated the quantitation methodology. The study used Monte Carlo N-Particle eXtended code version 2.6 for calculating the S-values required to set up the injected activity to deliver a 100 Gy absorbed dose at a determined synovial thickness. The radionuclides assessed were: 90Y, 32P, 188Re, 186Re, 153Sm, and 177Lu, and the present study shows their effective treatment ranges., Result: The quantitation methodology was successfully tested, with an error below 5% for different materials. S-values calculated could provide data on the activity to be injected into the joint, considering no extra-articular leakage from joint cavity. Calculation of effective treatment range could assist with the therapeutic decision, with an optimized protocol for dose prescription in RSO., Conclusion: Using 3D Slicer software, this study focused on segmentation and quantitation of radiological features such as joint effusion, synovial size, and thickness, all obtained by 3D MRI in patients' knees with hemophilic arthropathy. The combination of synovial size and thickness with the parameters obtained by Monte Carlo simulation such as effective treatment range and S-value, from which is calculated the injected activity, could be used for treatment planning in RSO. Data from this methodology could be a potential aid to clinical decision making by selecting the most suitable radionuclide; justifying the procedure, fractioning the dose, and the calculated injected activity for children and adolescents, considering both the synovial size and thickness., (© 2017 American Association of Physicists in Medicine.)