Search

Anisotropic disorder along the c-axis results from static disorder.

Anisotropic disorder along the c-axis results from static disorder.

Pressure induced correlated evolution of the distributions of the Si-O distance and Si-O-Si intertetrahedral bond angle in vitreous silica quenched from pressures of up to ~14 GPa at ambient temperature is measured in unprecedented detail using two-dimensional dynamic-angle-spinning 17O nuclear magnetic resonance spectroscopy. The results demonstrate that, in contrast to the conventional wisdom, vitreous silica undergoes irreversible structural changes even at pressures as low as ~8 GPa. These structural changes at the short range involve a progressive reduction in the mean Si-O-Si angle and a broadening of the corresponding distribution, with increasing pressure. This bond angle reduction is accompanied by a concomitant monotonic increase in the mean Si-O distance. The mean values of the Si-O-Si angle and Si-O distance at various pressures closely follow the minimum in the corresponding potential energy surface calculated for the H6Si2O7 dimer molecule. [ABSTRACT FROM AUTHOR]

The Carr–Purcell–Meiboom–Gill (CPMG) experiment has gained popularity in solid-state NMR as a method for enhancing sensitivity for anisotropically broadened spectra of both spin 1/2 and half integer quadrupolar nuclei. Most commonly, the train of CPMG echoes is Fourier transformed directly, which causes the NMR powder pattern to break up into a series of sidebands, sometimes called “spikelets.” Larger sensitivity enhancements are observed as the delay between the π pulses is shortened. As the duration between the π pulses is shortened, however, the echoes become truncated and information about the nuclear spin interactions is lost. We explored the relationship between enhanced sensitivity and loss of information as a function of the product Ω 2τ, where Ω is the span of the anisotropic lineshape and 2τ is the π pulse spacing. For a lineshape dominated by the nuclear shielding anisotropy, we found that the minimum uncertainty in the tensor values is obtained using Ω 2τ values in the range Ω 2τ≈12-1+6 and Ω 2τ≈9-3+3 for ηs=0 and ηs=1, respectively. For an anisotropic second-order quadrupolar central transition lineshape under magic-angle spinning (MAS), the optimum range of Ω 2τ≈9-2+3 was found. Additionally, we show how the Two-dimensional One Pulse (TOP) like processing approach can be used to eliminate the cumbersome sideband pattern lineshape and recover a more familiar lineshape that is easily analyzed with conventional lineshape simulation algorithms. [ABSTRACT FROM AUTHOR]

Recent methodological advances have made it possible to measure fine structure on the order of a few hertz in the nuclear magnetic resonance (NMR) spectra of quadrupolar nuclei in polycrystalline samples. Since quadrupolar couplings are often a significant fraction of the Zeeman coupling, a complete analysis of such experimental spectra requires a theoretical treatment beyond first-order. For multiple pulse NMR experiments, which may include sample rotation, the traditional density matrix approaches for treating higher-order effects suffer from the constraint that undesired fast oscillations (i.e., multiples of the Zeeman frequency), which arise from allowed overtone transitions, can only be eliminated in numerical simulations by employing sampling rates greater than 2I times the Zeeman frequency. Here, we present a general theoretical approach for arbitrary spin I that implements an analytical “filtering” of undesired fast oscillations in the rotating tilted frame, while still performing an exact diagonalization. Alternatively, this approach can be applied using a perturbation expansion for the eigenvalues and eigenstates, such that arbitrary levels of theory can be explored. The only constraint in this approach is that the Zeeman interaction remains the dominant interaction. Using this theoretical framework, numerical simulations can be implemented without the need for a high sampling rate of observables and with significantly reduced computation times. Additionally, this approach provides a general procedure for focusing on the excitation and detection of both fundamental and overtone transitions. Using this approach we explore higher-order effects on a number of sensitivity and resolution issues with NMR of quadrupolar nuclei. [ABSTRACT FROM AUTHOR]

In this work, we extracted 95% of the electrochemically available Li from LiNi0.8Co0.15Al0.05O2 (NCA) by galvanostatically charging the NCA/MCMB full cell to 4.7 V. Joint powder X-ray and neutron diffraction (XRD & ND) studies were undertaken for NCA at highly charged states at the first cycle, and discharged states at different cycles. The results indicate that the bulk structure of NCA maintains the O3 structure up to the extraction of 0.90 Li per formula unit. In addition, we found that the transition metal layer becomes more disordered along the c-axis than along the a- and b-axes upon charging. This anisotropic disorder starts to develop no later than 4.3 V on charge and continues to grow until the end of charge. As Li is re-inserted during discharge, the structure that resembles the pristine NCA is recovered. The irreversible loss of Li and the migration of Ni to the Li layer have been quantified by the joint XRD and ND refinement and the results were further verified by solid state 7Li NMR and magnetic measurements. Our work clearly demonstrates that the NCA bulk retains a robust, single phase O3 structure throughout the wide delithiation range (up to 0.9 Li per formula unit of NCA) and is suitable for higher energy density usage with proper modifications. [ABSTRACT FROM AUTHOR]

The doping of Al into layered Li transition metal (TM) oxide cathode materials, LiTMO2, is known to improve the structural and thermal stability, although the origin of the enhanced properties is not well understood. The effect of aluminum doping on layer stabilization has been investigated using a combination of techniques to measure the aluminum distribution in layered LiNi0.8Co0.15Al0.05O2 (NCA) over multiple length scales with 27Al and 7Li MAS NMR, local electrode atom probe (APT) tomography, X-ray and neutron diffraction, DFT, and SQUID magnetic susceptibility measurements. APT ion maps show a homogeneous distribution of Ni, Co, Al, and O2 throughout the structure at the single particle level in agreement with the high-temperature phase diagram. 7Li and 27Al NMR indicates that the Ni3+ ions undergo a dynamic Jahn-Teller (JT) distortion. 27Al NMR spectra indicate that the Al reduces the strain associated with the JT distortion, by preferential electronic ordering of the JT lengthened bonds directed toward the Al3+ ion. The ability to understand the complex atomic and orbital ordering around Al3+ demonstrated in the current method will be useful for studying the local environment of Al3+ in a range of transition metal oxide battery materials. [ABSTRACT FROM AUTHOR]

Sodium batteries have seen a resurgence of interest from researchers in recent years, owing to numerous favorable properties including cost and abundance. Here we examine the feasibility of studying this battery chemistry with in situ NMR, focusing on Na metal anodes. Quantification of the NMR signal indicates that Na metal deposits with a morphology associated with an extremely high surface area, the deposits continually accumulating, even in the case of galvanostatic cycling. Two regimes for the electrochemical cycling of Na metal are apparent that have implications for the use of Na anodes: at low currents, the Na deposits are partially removed on reversing the current, while at high currents, there is essentially no removal of the deposits in the initial stages. At longer times, high currents show a significantly greater accumulation of deposits during cycling, again indicating a much lower efficiency of removal of these structures when the current is reversed. [ABSTRACT FROM AUTHOR]

There is an ever-increasing need for advanced batteries for portable electronics, to power electric vehicles and to facilitate the distribution and storage of energy derived from renewable energy sources. The increasing demands on batteries and other electrochemical devices have spurred research into the development of new electrode materials that could lead to better performance and lower cost (increased capacity, stability and cycle life, and safety). These developments have, in turn, given rise to a vigorous search for the development of robust and reliable diagnostic tools to monitor and analyse battery performance, where possible, in situ. Yet, a proven, convenient and non-invasive technology, with an ability to image in three dimensions the chemical changes that occur inside a full battery as it cycles, has yet to emerge. Here we demonstrate techniques based on magnetic resonance imaging, which enable a completely non-invasive visualization and characterization of the changes that occur on battery electrodes and in the electrolyte. The current application focuses on lithium-metal batteries and the observation of electrode microstructure build-up as a result of charging. The methods developed here will be highly valuable in the quest for enhanced battery performance and in the evaluation of other electrochemical devices. [ABSTRACT FROM AUTHOR]

The article focuses on in situ nuclear magnetic resonance (NMR) approach for studying lithium (Li) ion batteries (LIB). It states that NMR is a way to study how the dendrites were formed in the lithium metal as well as allows to monitor their growth to further investigate how the radio frequency (rf) field penetrates into the lithium metal. It adds that the approach is a means for knowing the changes that occur in LIB which is accompanied with the distinct NMR signals.