Search

The increasing demand for functional nanodevices in sustainable energy applications necessitates the development of innovative approaches. In this study, we present the fabrication and characterization of three-dimensional (3D) structures coated with titanium dioxide (TiO 2) nanorods (NRs). These novel devices are created through the integration of four distinct techniques, multi-photon lithography, post-thermal treatment, pulsed laser deposition, and an aqueous chemical growth, enabling their unique properties and functionalities in photocatalysis. The photocatalytic performance of the 3D devices is evaluated through the degradation of organic pollutants, such as methylene blue and stearic acid, showcasing their efficiency in reducing pollutant concentrations. The devices demonstrate a remarkable decomposition coefficient (k = 0.059 min − 1 ), highlighting their enhanced photocatalytic efficiency. Additionally, we propose a rapid fabrication technique using 3D holographic printing to create large-area TiO 2 -coated micro-structured photocatalytic devices at the mesoscale regime. This approach increases the active surface area, further enhancing the devices' photocatalytic capabilities. By combining additive micro-manufacturing, TiO 2 NR coating, and holographic printing, our work introduces a promising avenue for the development of advanced nanodevices with superior photocatalytic performance in sustainable energy applications. [ABSTRACT FROM AUTHOR]

We demonstrate a reliable authentication method by femtosecond laser filament induced scattering surfaces. The stochastic nonlinear laser fabrication nature results in unique authentication robust properties. This work provides a simple and viable solution for practical applications in product authentication, while also opens the way for incorporating such elements in transparent media and coupling those in integrated optical circuits. [ABSTRACT FROM AUTHOR]

We propose an integrated methodology for the design and fabrication of 3D micromodels that are suitable for the pore-scale study of transport processes in macroporous materials. The micromodels, that bear the pore-scale characteristics of sandstone, such as porosity, mean pore size, etc, are designed following a stochastic reconstruction algorithm that allows for fine-tuning the porosity and the correlation length of the spatial distribution of the solid material. We then construct a series of 3D micromodels at very fine resolution (i.e. 16 μ m) using a state-of-the-art 3D printing infrastructure, specifically a ProJet MJP3600 3D printer, that utilizes the Material Jetting technology. Within the technical constraints of the 3D printer resolution, the fabricated micromodels represent scaled-up replicas of natural sandstones, that are suitable for the study of the scaling between the permeability, the porosity and the mean pore size. The REV- and pore-scale characteristics of the resulting physical micromodels are recovered using a combination of X-ray micro-CT and microfluidic studies. The experimental results are then compared with single-phase flow simulations at pore-scale and geostatistic models in order to determine the effects of the design parameters on the intrinsic permeability and the spatial correlation of the velocity profile. Our numerical and experimental measurements reveal an excellent match between the properties of the designed and fabricated 3D domains, thus demonstrating the robustness of the proposed methodology for the construction of 3D micromodels with fine-tuned and well-controlled pore-scale characteristics. Furthermore, a pore-scale numerical study over a wider range of 3D digital domain realizations reveals a very good match of the measured permeabilities with the predictions of the Kozeny–Carman formulation based on a single control parameter, k 0 , that is found to have a practically constant value for porosities ϕ ≥ 0.2 . This, in turn, enables us to customize the sample size to meet REV constraints, including enlarging pore morphology while considering the Reynolds number. It is also found that at lower porosities there is a significant increase in the fraction of the non-percolating pores, thus leading to different k 0 , as the porosity approaches a numerically determined critical porosity value, ϕ c , where the domain is no longer percolating. [ABSTRACT FROM AUTHOR]

A review on the recent development of intense laser‐driven terahertz (THz) sources is provided here. The technologies discussed include various types of sources based on optical rectification (OR), spintronic emitters, and laser‐filament‐induced plasma. The emphasis is on OR using pump pulses with tilted intensity front. Illustrative examples of newly emerging applications are briefly discussed, in particular strong‐field THz control of materials and acceleration and manipulation of charged particles. [ABSTRACT FROM AUTHOR]

Optical activity (polarization rotation of light) is one of the most desired features of chiral media, as it is important for many polarization‐related applications. However, in the THz region, chiral media with strong optical activity are not available in nature. Here, a chiral metamaterial (CMM) structure composed of pairs of vertical U‐shape resonators of "twisted" arms is studied, and it is revealed that it demonstrates large pure optical activity (i.e., optical activity associated with negligible transmitted wave ellipticity) in the low THz regime. The experimental data show polarization rotation up to 25° for an unmatched bandwidth of 1 THz (relative bandwidth 80%), from a 130 µm‐thickness structure, while theoretical optimizations show that the rotation can reach 45°. The enhanced chiral response of the structure is analyzed through an equivalent RLC circuit model, which also provides simple optimization rules for the enhancement of its chiral response. The proposed chiral design allows for easy fabrication via direct laser writing (DLW) and electroless metal plating, making the associated structures suitable candidates for polarization control applications. [ABSTRACT FROM AUTHOR]

We examine the spatiotemporal dynamics of filamentation and subsequent material changes in two transparent media, fused silica and poly(methyl methacrylate) (PMMA), using inline holographic microscopy. We are able to dynamically observe the nonlinear propagation of femtosecond laser pulses and the consequent evolution of the electronic excitatio n and trapping inside the bulk of both materials. In the case of fused silica we reveal the physical conditions for the formation of nanogratings, measuring excited electron densities well below the critical density while for PMMA we show that excited electrons with densities exceeding 10 cm, exhibit complex trapping dynamics in a 200 fs time scale. The clear demonstration of ultrafast sub-ps photochemical processes that take place during the irradiation of PMMA with femtosecond pulses will have a strong impact on the laser microprocessing of polymers and nanosurgery applications of bio-related materials. [ABSTRACT FROM AUTHOR]

Laser direct writing is a widely employed technique for 3D, contactless, and fast functionalization of dielectrics. Its success mainly originates from the utilization of ultrashort laser pulses, offering an incomparable degree of control on the produced material modifications. However, challenges remain for devising an equivalent technique in crystalline silicon which is the backbone material of the semiconductor industry. The physical mechanisms inhibiting sufficient energy deposition inside silicon with femtosecond laser pulses are reviewed in this article as well as the strategies established so far for bypassing these limitations. These solutions consisting of employing longer pulses (in the picosecond and nanosecond regime), femtosecond‐pulse trains, and surface‐seeded bulk modifications have allowed addressing numerous applications. [ABSTRACT FROM AUTHOR]

Outdoor devices comprising materials with mid-IR emissions at the atmospheric window (8–13 μm) achieve passive heat dissipation to outer space (~ − 270 °C), besides the atmosphere, being suitable for cooling applications. Recent studies have shown that the micro-scale photonic patterning of such materials further enhances their spectral emissivity. This approach is crucial, especially for daytime operation, where solar radiation often increases the device heat load. However, micro-scale patterning is often sub-optimal for other wavelengths besides 8–13 μm, limiting the devices' efficiency. Here, we show that the superposition of properly designed in-plane nano- and micro-scaled periodic patterns results in enhanced device performance in the case of solar cell applications. We apply this idea in scalable, few-micron-thick, and simple single-material (glass) radiative coolers on top of simple-planar Si substrates, where we show an ~ 25.4% solar absorption enhancement, combined with a ~ ≤ 5.8 °C temperature reduction. Utilizing a coupled opto-electro-thermal modeling we evaluate our nano-micro-scale cooler also in the case of selected, highly-efficient Si-based photovoltaic architectures, where we achieve an efficiency enhancement of ~ 3.1%, which is 2.3 times higher compared to common anti-reflection layers, while the operating temperature of the device also decreases. Besides the enhanced performance of our nano-micro-scale cooler, our approach of superimposing double- or multi-periodic gratings is generic and suitable in all cases where the performance of a device depends on its response on more than one frequency bands. [ABSTRACT FROM AUTHOR]

Ultrafast laser welding is a fast, clean, and contactless technique for joining a broad range of materials. Nevertheless, this technique cannot be applied for bonding semiconductors and metals. By investigating the nonlinear propagation of picosecond laser pulses in silicon, it is elucidated how the evolution of filaments during propagation prevents the energy deposition at the semiconductor–metal interface. While the restrictions imposed by nonlinear propagation effects in semiconductors usually inhibit countless applications, the possibility to perform semiconductor–metal ultrafast laser welding is demonstrated. This technique relies on the determination and the precompensation of the nonlinear focal shift for relocating filaments and thus optimizing the energy deposition at the interface between the materials. The resulting welds show remarkable shear joining strengths (up to 2.2 MPa) compatible with applications in microelectronics. Material analyses shed light on the physical mechanisms involved during the interaction. [ABSTRACT FROM AUTHOR]

Ultrafast Laser Welding: Taming Ultrafast Laser Filaments for Optimized Semiconductor-Metal Welding (Laser Photonics Rev. 15(2)/2021) In article number 2000433, Maxime Chambonneau, Qingfeng Li, Stefan Nolte, and co-workers demonstrate semiconductor-metal ultrafast laser welding - an additive manufacturing technique limited to other material families so far. This work offers new insights for the fabrication of microelectronic devices. [Extracted from the article]

We demonstrate both theoretically and experimentally that the harmonics from abruptly autofocusing ring-Airy beams present a surprising property: They preserve the phase distribution of the fundamental beam. Consequently, this "phase memory" imparts to the harmonics the abrupt autofocusing behavior, while, under certain conditions, their foci coincide in space with the one of the fundamental. Experiments agree well with our theoretical estimates and detailed numerical calculations. Our findings open the way for the use of such beams and their harmonics in strong field science. [ABSTRACT FROM AUTHOR]

A correction to the article "Robust authentication through stochastic femtosecond laser filament induced scattering surfaces," by Haisu Zhang and colleagues that was published in the 2016 issue is presented.

We demonstrate experimentally that by using transient plasma photonic lattices, the attributes of intense femtosecond laser filaments, such as peak intensity and length, can be dynamically controlled. The extended plasma lattice structure is generated using two co-propagating non-diffracting intense Bessel beams in water. The use of such transient lattice structures to control the competition between linear and nonlinear effects involved in filamentation opens the way for extensive control of the filamentation process. [ABSTRACT FROM AUTHOR]