Search

The trapped magnetic field is examined in bulk high-temperature superconductors that are artificially drilled along their c-axis. The influence of the hole pattern on the magnetization is studied and compared by means of numerical models and Hall probe mapping techniques. To this aim, we consider two bulk YBCO samples with a rectangular cross-section that are drilled each by six holes arranged either on a rectangular lattice (sample I) or on a centered rectangular lattice (sample II). For the numerical analysis, three different models are considered for calculating the trapped flux: (i), a two-dimensional (2D) Bean model neglecting demagnetizing effects and flux creep, (ii), a 2D finite-element model neglecting demagnetizing effects but incorporating magnetic relaxation in the form of an E-J power law, and, (iii), a 3D finite element analysis that takes into account both the finite height of the sample and flux creep effects. For the experimental analysis, the trapped magnetic flux density is measured above the sample surface by Hall probe mapping performed before and after the drilling process. The maximum trapped flux density in the drilled samples is found to be smaller than that in the plain samples. The smallest magnetization drop is found for sample II, with the centered rectangular lattice. This result is confirmed by the numerical models. In each sample, the relative drops that are calculated independently with the three different models are in good agreement. As observed experimentally, the magnetization drop calculated in the sample II is the smallest one and its relative value is comparable to the measured one. By contrast, the measured magnetization drop in sample (1) is much larger than that predicted by the simulations, most likely because of a change of the microstructure during the drilling process., Comment: Proceedings of EUCAS 09 conference

We present a method for characterizing the propagation of the magnetic flux in an artificially drilled bulk high-temperature superconductor (HTS) during a pulsed-field magnetization. As the magnetic pulse penetrates the cylindrical sample, the magnetic flux density is measured simultaneously in 16 holes by means of microcoils that are placed across the median plane, i.e. at an equal distance from the top and bottom surfaces, and close to the surface of the sample. We discuss the time evolution of the magnetic flux density in the holes during a pulse and measure the time taken by the external magnetic flux to reach each hole. Our data show that the flux front moves faster in the median plane than on the surface when penetrating the sample edge; it then proceeds faster along the surface than in the bulk as it penetrates the sample further. Once the pulse is over, the trapped flux density inside the central hole is found to be about twice as large in the median plane than on the surface. This ratio is confirmed by modelling.

Drilling holes in a bulk high-Tc superconductor enhances the oxygen annealing and the heat exchange with the cooling liquid. However, drilling holes also reduces the amount of magnetic flux that can be trapped in the sample. In this paper, we use the Bean model to study the magnetization and the current line distribution in drilled samples, as a function of the hole positions. A single hole perturbs the critical current flow over an extended region that is bounded by a discontinuity line, where the direction of the current density changes abruptly. We demonstrate that the trapped magnetic flux is maximized if the center of each hole is positioned on one of the discontinuity lines produced by the neighbouring holes. For a cylindrical sample, we construct a polar triangular hole pattern that exploits this principle; in such a lattice, the trapped field is ~20% higher than in a squared lattice, for which the holes do not lie on discontinuity lines. This result indicates that one can simultaneously enhance the oxygen annealing, the heat transfer, and maximize the trapped field.

$La_{0.7}Ca_{0.3}MnO_3$ samples were prepared in nano- and polycrystalline forms by sol-gel and solid state reaction methods, respectively, and structurally characterized by synchrotron X-ray diffraction. The magnetic properties determined by ac susceptibility and dc magnetization measurements are discussed. The magnetocaloric effect in this nanocrystalline manganite is spread over a broader temperature interval than in the polycrystalline case. The relative cooling power of the poly- and nanocrystalline manganites is used to evaluate a possible application for magnetic cooling below room temperature., Comment: 6 pages, 5 (double) figures, 1 table, 16 references; submitted to Appl. Phys. A

We report the results of electrical resistivity measurements carried out on well-sintered La0.7Ca0.3MnO3 / Mn3O4 composite samples with almost constant composition of the magnetoresistive manganite phase (La0.7Ca0.3MnO3). A percolation threshold (fc) occurs when the La0.7Ca0.3MnO3 volume fraction is ~ 0.19. The dependence of the electrical resistivity as a function of La0.7Ca0.3MnO3 volume fraction (fLCMO) can be described by percolation-like phenomenological equations. Fitting the conducting regime (fLCMO > fc) by the percolation power law returns a critical exponent t value of 2.0 +/- 0.2 at room temperature and 2.6 +/-0.2 at 5 K. The increase of t is ascribed to the influence of the grain boundaries on the electrical conduction process at low temperature., Comment: 7 pages, 3 figures, accepted for publication in Phys. Rev. B

Crossed magnetic field effects on bulk high-temperature superconductors have been studied both experimentally and numerically. The sample geometry investigated involves finite-size effects along both (crossed) magnetic field directions. The experiments were carried out on bulk melt-processed Y-Ba-Cu-O (YBCO) single domains that had been pre-magnetized with the applied field parallel to their shortest direction (i.e. the c-axis) and then subjected to several cycles of the application of a transverse magnetic field parallel to the sample ab plane. The magnetic properties were measured using orthogonal pick-up coils, a Hall probe placed against the sample surface and Magneto-Optical Imaging (MOI). We show that all principal features of the experimental data can be reproduced qualitatively using a two-dimensional finite-element numerical model based on an E-J power law and in which the current density flows perpendicularly to the plane within which the two components of magnetic field are varied. The results of this study suggest that the suppression of the magnetic moment under the action of a transverse field can be predicted successfully by ignoring the existence of flux-free configurations or flux-cutting effects. These investigations show that the observed decay in magnetization results from the intricate modification of current distribution within the sample cross-section. It is also shown that the model does not predict any saturation of the magnetic induction, even after a large number (~ 100) of transverse field cycles. These features are shown to be consistent with the experimental data., Comment: 41 pages, 9 figures, accepted in Phys. Rev. B Changes : 8 references added, a few precisions added, some typos corrected

Rare-earth manganites are fascinating, because they display a wide variety of fundamental properties from magnetism to ferroelectricity, from colossal magnetoresistance to semi-metallicity, and because they can be used in a number of important technological applications such as controlling a magnetic memory by an electric field or vice versa, new types of attenuators or transducers etc. In this paper, we present our investigation on monocrystal samples with an orthorhombic structure, grown in two different space groups: D2h(16) for La0.78Pb0.22MnO3 and Pr0.7Sr0.3MnO3 and D2h(9) for HoMn2O5 and TbMn2O5. The doped perovskite manganites Ln1-x Ax MnO3 (where Ln is a rare-earth ion and A is a divalent ion) from the group D2h(16), which crystallized in different modifications of the perovskite structure, characterized by the parameter deformation of the type c/√2

Silver paint has been tested as a soldering agent for DyBaCuO single-domain welding. Junctions have been manufactured on Dy-Ba-Cu-O single-domains cut either along planes parallel to the c-axis or along the ab-planes. Microstructural and superconducting characterisations of the samples have been performed. For both types of junctions, the microstructure in the joined area is very clean: no secondary phase or Ag particles segregation has been observed. Electrical and magnetic measurements for all configurations of interest are reported $\rho(T)$ curves, and Hall probe mapping). The narrow resistive superconducting transition reported for all configurations shows that the artificial junction does not affect significantly the measured superconducting properties of the material., Comment: 12 pages, including 5 figures; 34 references; to be published in Supercond. Sci. Technol

Loosely packed granular materials are intensively studied nowadays. Electrical and thermal transport properties should reflect the granular structure as well as intrinsic properties. We have compacted crystalline $CaAl$ based metallic grains and studied the electrical resistivity and the thermoelectric power as a function of temperature ($T$) from 15 to 300K. Both properties show three regimes as a function of temperature. It should be pointed out : (i) The electrical resistivity continuously decreases between 15 and 235 K (ii) with various dependences, e.g. $\simeq$ $T^{-3/4}$ at low $T$, while (iii) the thermoelectric power (TEP) is positive, (iv) shows a bump near 60K, and (v) presents a rather unusual square root of temperature dependence at low temperature. It is argued that these three regimes indicate a competition between geometric and thermal processes, - for which a theory seems to be missing in the case of TEP. The microchemical analysis results are also reported indicating a complex microstructure inherent to the phase diagram peritectic intricacies of this binary alloy., Comment: to be published in J. Appl. Phys.22 pages, 8 figures

The following report considers textured materials of the DyBa2Cu3O7 type seeded with a Nd123 seed as initiator. They are grown with an excess 20% Dy211 phase on a Dy2O3 substrate. We report chemical characterizations, electrical resistivity, thermoelectric power and thermal conductivity over a broad temperature range as a function of an applied magnetic field up to 6 T. We show that specific features appear on the magneto thermal transport properties different in these materials from those found in single crystals and polycrystalline samples. We propose that two vortex regimes can be distinguished in the mixed phase, - due to the intrinsic microstructure. We calculate the viscosity, entropy and figure of merit of the samples., Comment: 18 pages, with 8 figures; 4 color figuresx missing (much memory needed)

We report a detailed set of AC magnetic measurements carried out on bulk large grain La-Ca-Mn-O samples extracted from a floating zone method-grown rod. Three samples with $La_{0.78}Ca_{0.22}Mn_{0.90}O_{x}$ stoichiometry but differing in their microstructure were investigated by electrical resistivity and AC susceptibility measurements: (i) a single grain sample, (ii) a sample containing two grains and (iii) a polycrystalline sample. We show that the superimposition of DC magnetic fields during AC magnetic susceptibility measurements is an efficient way for characterizing the magnetic transition of samples with different microstructures. Whereas both single grain and polycrystalline samples display a single susceptibility peak, an additional kink structure is observed in the case of the double grain sample. The temperature dependence of the AC susceptibility measured with superimposed DC magnetic fields is analyzed in the framework of second-order phase transition ideas. The relations between the critical exponents ($\beta + \gamma$ ~ 1.5, $\delta$ ~ 2.5) are found to be close to those of the mean-field model for all samples. This is attributed to the disordering caused by unoccupied Mn sites., Comment: 25 pages, including 5 figures

Hardness and fracture toughness of Dy-123 single-domains were studied by Vickers micro-indentation. A significant anisotropy of the mechanical properties was observed. Hardness tests give higher values when performed in (001) planes rather than in planes parallel to the c-axis. Moreover cracks pattern around the indentation follows preferential orientation in planes parallel to the c-axis whereas a classical ''four-cracks'' pattern is observed in the (001) planes. It has been possible to show the crucial role played by the 211-particles in the deviating mechanism of cracks and the relevance of the 211-particle distribution high homogeneity in the material., Comment: 14 pages, including 5 figures and 1 Table. submitted to Supercond. Sci. Technol

Several experimental techniques have been used in order to characterize the properties of multifilamentary Bi-2223 / Ag tapes. Pristine samples were investigated by electrical resistivity, current-voltage characteristics and DC magnetic moment measurements. Much emphasis is placed on comparing transport (direct) and magnetic (indirect) methods for determining the critical current density as well as the irreversibility line and resolving usual lacks of consistency due to the difference in measurement techniques and data analysis. The effect of an applied magnetic field, with various strengths and directions, is also studied and discussed. Next, the same combination of experiments was performed on bent tapes in order to bring out relevant information regarding the intergranular coupling. A modified Brandt model taking into account different types of defects within the superconducting filaments is proposed to reconciliate magnetic and transport data., Comment: 10 pages (2 columns); 8 figures; 1 table. submitted to Supercond. Sci. Technol

This paper aims at reporting magnetic properties of bulk polycrystalline Bi2Sr2Ca0.8Dy0.2Cu2O8-y samples textured under a magnetic field. The microstructure of these materials is highly anisotropic and exhibits particular features needed to be taken into account in order to interpret their magnetic and electrical properties. First the AC magnetic susceptibility c = c ' - j c" has been measured for several magnetic fields (H // ab and H // c) and compared to the electrical resistivity data. The structure of the c" peak is shown to be related to the chemical content distribution of the superconducting grains. Next, the magnetic flux profiles have been extracted from the magnetic measurements using the Campbell - Rollins procedure. The anisotropy of the flux profiles and their peculiar curvature behaviour for H // c point out the role of both grain platelet structure and the presence of secondary phases. From these results, we conclude that the magnetic properties of such magnetically textured materials do not allow for a reliable extraction of the critical current density Jc but essentially probe geometric effects. Such effects have to be taken into account for improving the manufacture of attractive high-Tc materials., Comment: 6 pages, 3 figures; no changes in the content of the paper; it will appear in Physica C