Search

The power system is a network of components having specific operational limits such that any violation of these limits during their operation could lead to more damage in the grid. The grid in Cameroon has been facing several undesired loading events at some sections of the network and the utility company has over the years, employed measures to mitigate these issues. This study has used the ETAP software to conduct a contingency analysis on the largest independent grid in Cameroon, supplying 6 regions in Cameroon. Seventeen transformer outage events in the network were used to conduct the N‐1 scenario‐based contingency, so that the vulnerability of the network can be evaluated. The fast decoupled power flow method was continuously applied on the network, and the different contingency scenarios were ranked using a combination of 4 performance indices. These four performance indices gave information on the impact of the various transformer outage scenarios on the grid. The four indices were added to give a combined value, and the outages were ranked in order of severity based on this combined index. A major contribution of this paper is the use of four scalar indices to classify the critical elements in the grid of a developing country. The initial load flow simulation of the network showed that 12 nodes had under voltages, while 3 transformers and one transmission line were overloaded. The Ngousso corridor suffered one of the worst under voltage situation during the initial power flow study. This is an indication that the utility company needs to undertake intensive network upgrade and implore measures to increase power generation to support the growing loads. It was observed that all the contingency scenarios experienced convergence. The Oyomabang transformer 1 had the highest combined index of 71.20, showing a huge negative impact on the network as a result of the outage of the transformer. This was followed by the Oyomabang transformer 2 with a combined index of 48.63. The results will be very useful to utility operators in prioritizing transformers in the network with high risk of causing huge impact on the network in case of an outage. [ABSTRACT FROM AUTHOR]

Electrical power system robustness is defined as the intrinsic capacity of an electrical power system to maintain assigned disturbance levels when external conditions change. This paper compares two methods for estimating voltage dip severity: the critical distance method and the fault position method. Their differences are not linked to the type of network but to the type of results which we are searching for. This paper proposes a graphical color visualization of the during fault voltage matrices that immediately correlates dip severity with colors defined by a proper scale. New robustness indices are also proposed to synthesize bus performance in terms of affected and exposed areas. Numerical applications refer to real transmission and real distribution systems. Index Terms--Power distribution, power quality (PQ), power system reliability, power transmission, voltage dips.

DC are furnaces are more and more applied in large industrial systems and represent one of the major sources of perturbations for the feeding system. This paper deals with the problem of the dc arc modeling using three well-known chaotic attractors (Rossler, Chua, and Lorenz attractors). A new tuning procedure is adopted to determine the most adequate parameters of the attractors to model the dc arc furnace. Waveform distortions and voltage fluctuations indexes are calculated from the simulation results of a whole existing plant and compared with measured data. The proposed models of dc arc furnace can be used to assess the impact in terms of power quality of the dc arc furnace when planning new plants or evaluating the performances of compensating devices. Index Terms--Chaotic models, DC arc furnaces, power quality.

The ac/dc/ac double-stage converter, frequently used nowadays to provide ac adjustable frequency and magnitude voltages in the adjustable-speed drives, consists of a voltage source inverter (VSI) fed by a three-phase diode bridge rectifier; this rectifier generates high line current harmonics in the supply system. This paper presents a complete modelling of the VSI-fed drives, when energized by nonsinusoidal supply voltages, based on the analytical form of the current harmonics injected in the supply system; the equations of the current harmonics are obtained for both the continuous and discontinuous current modes and are derived by Fourier analysis of steady-state current time evolution. The high accuracy of the proposed models is demonstrated by comparison with the results of time-domain simulation. The modelling is useful to study the effects of supply voltage distortions on current harmonics injected in the supply system, both in continuous and discontinuous mode, with a very short computing time. Index Terms--Harmonic modelling, voltage source inverter-fed drive.