Search

Different projections of hexagonal structures of QPDMAEMA-b-POEGMA/DNA complexes CR = 10 with a spacing of 3 nm, as shown in FFTs.

The abilities of sub-cellular targeting and stimuli-responsiveness are critical challenges in pharmaceutical nanotechnology. In the present study, glyceryl monooleate (GMO)-based non-lamellar lyotropic liquid crystalline nanoparticles were stabilized by the poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) block copolymer carrying tri-phenyl-phosphine cations (TPP-QPDMAEMA-b-PLMA), either used alone or in combination with other polymers as co-stabilizers. The systems were designed to perform simultaneously sub-cellular targeting, stimuli-responsiveness and to exhibit stealthiness. The physicochemical characteristics and fractal dimensions of the resultant nanosystems were obtained from light scattering techniques, while their micropolarity and microfluidity from fluorescence spectroscopy. Their morphology was assessed by cryo-TEM, while their thermal behavior by microcalorimetry and high-resolution ultrasound spectroscopy. The analyzed properties, including the responsiveness to pH and temperature, were found to be dependent on the combination of the polymeric stabilizers. The subcellular localization was monitored by confocal microscopy, revealing targeting to lysosomes. Subsequently, resveratrol was loaded into the nanosystems, the entrapment efficiency was investigated and in vitro release studies were carried out at different conditions, in which a stimuli-triggered drug release profile was achieved. In conclusion, the proposed multi-functional nanosystems can be considered as potentially stealth, stimuli-responsive drug delivery nanocarriers, with targeting ability to lysosomes and presenting a stimuli-triggered drug release profile.

The ion specificity effect on the water solubility of poly(N-isopropylacrylamide)-containing copolymers complies with the Hofmeister series, which is applicable to other copolymers or not need to be explored. In this work, effects of ionic strength under acidic conditions and ion specificity under alkaline conditions on the air/water interface behavior of two amphiphilic diblock copolymers poly(dimethylaminoethyl methacrylate)-poly(lauryl methacrylate) (PDMAEMA-PLMA) were systematically studied. Under acidic conditions, the surface pressure-area isotherms of a predominantly hydrophilic copolymer are insensitive to ionic strength. In contrast, the isotherms of a predominantly hydrophobic copolymer successively shift to the large, small, and large molecular area with the increase of ionic strength. Under alkaline conditions, the interfacial stretch degrees of PDMAEMA chains of two copolymers change with salt species and concentrations, which do not comply with the Hofmeister series. All of the Langmuir-Blodgett films of the former copolymer exhibit separate circular micelles. Nevertheless, those of the latter copolymer obtained under alkaline conditions exhibit various distinctive morphologies such as separate circular micelles, large separate PLMA cores within large PDMAEMA domains, and large PLMA domains/aggregates surrounded by short PDMAEMA shells. It can be attributed to the high deformability of PLMA chains, the ion specificity effect on the stretch degree of PDMAEMA blocks, and their underwater solubility upon compression.

The Langmuir film balance technique was used to investigate the effects of copolymer composition and subphase pH/temperature on the aggregation behaviors of two stimuli-responsive amphiphilic diblo...

The technology of lipid nanoparticles has a long history in drug delivery, which begins with the discovery of liposomes by Alec D Bangham in the 1960s. Since then, numerous studies have been conducted on these systems, and several nanomedicinal products that utilize them have entered the market, with the latest being the COVID-19 vaccines. Despite their success, many aspects of their biophysical behavior are still under investigation. At the same time, their combination with other classes of biomaterials to create more advanced platforms is a promising endeavor. Herein, we developed mixed lipid-polymer nanoparticles with incorporated curcumin as a drug delivery system for therapy, and we studied its interactions with various biosystems. Initially, the nanoparticle physicochemical properties were investigated, where their size, size distribution, surface charge, morphology, drug incorporation and stability were assessed. The incorporation of the drug molecule was approximately 99.8 % for a formulated amount of 10 % by weight of the total membrane components and stable in due time. The association of the nanoparticles with human serum albumin and the effect that this brings upon their properties was studied by several biophysical techniques, including light scattering, thermal analysis and circular dichroism. As a biocompatibility assessment, interactions with erythrocyte membranes and hemolysis induced by the nanoparticles were also studied, with empty nanoparticles being more toxic than drug-loaded ones at high concentrations. Finally, interactions with bacterial membrane proteins of Staphylococcus aureus and the antibacterial effect of the nanoparticles were evaluated, where the effect of curcumin was improved when incorporated inside the nanoparticles. Overall, the developed mixed nanoparticles are promising candidates for the delivery of curcumin to infectious and other types of diseases.

Nanocarriers are delivery platforms of drugs, peptides, nucleic acids and other therapeutic molecules that are indicated for severe human diseases. Gliomas are the most frequent type of brain tumor, with glioblastoma being the most common and malignant type. The current state of glioma treatment requires innovative approaches that will lead to efficient and safe therapies. Advanced nanosystems and stimuli-responsive materials are available and well-studied technologies that may contribute to this effort. The present study deals with the development of functional chimeric nanocarriers composed of a phospholipid and a diblock copolymer, for the incorporation, delivery and pH-responsive release of the antiglioma agent TRAM-34 inside glioblastoma cells. Nanocarrier analysis included light scattering, protein incubation and electron microscopy, and fluorescence anisotropy and thermal analysis techniques were also applied. Biological assays were carried out in order to evaluate the nanocarrier nanotoxicity in vitro and in vivo, as well as to evaluate antiglioma activity. The nanosystems were able to successfully manifest functional properties under pH conditions, and their biocompatibility and cellular internalization were also evident. The chimeric nanoplatforms presented herein have shown promise for biomedical applications so far and should be further studied in terms of their ability to deliver TRAM-34 and other therapeutic molecules to glioblastoma cells.

In this article we present results on the glass transition, crystallization and molecular dynamics in relatively novel oligomers, oligo-ethylene glycol methacrylate (OEGMA), with short and long chains, as well as in the corresponding nanostructured comb-like polymers (POEGMA, short and long), the latter being prepared via the RAFT polymerization process. For the investigation we employed conventional and temperature modulated differential scanning calorimetry in combination with high resolving power dielectric spectroscopy techniques, broadband dielectric relaxation spectroscopy (BDS) and thermally stimulated depolarization currents (TSDC). Under ambient conditions short OEGMA (475 g mol-1, ∼4 nm in length) exhibits a remarkable low glass transition temperature, Tg, of -91 °C, crystallization temperature Tc = -24 °C and a significant crystalline fraction, CF, of ∼30%. When doubling the number of monomers (OEGMA-long, 950 g mol-1, chain length ∼8 nm) the Tg increases by about 20 K and CF increases to ∼53%, whereas, the Tc migrates to a room-like temperature of 19 °C. Upon formation of comb-like POEGMA structures the grafted OEGMA short chains, strikingly, are not able to crystallize, while in POEGMA-long the crystallization behaviour changes significantly as compared to OEGMA. Our results indicate that in the comb-like architecture the chain diffusion of the amorphous fractions is also strongly affected. The semicrystalline systems exhibit significant melt memory effects, this being stronger in the comb-like architecture. It is shown that these effects are related to the inter- and intra-chain interactions of the crystallizable chains. The dielectric techniques allowed the molecular dynamics mapping of these new systems from the linear oligomers to POEGMAs for the first time. BDS and TSDC detected various dynamics processes, in particular, the local polymer dynamics (γ process) to be sensitive to the Tg, local dynamics triggered in the hydrophilic chain segments by water traces (β), as well as the segmental dynamics (α) related to glass transition. Interestingly, both the short and long linear OEGMAs exhibit an additional relaxation process that resembles the Normal-Mode process appearing in polyethers. In the corresponding POEGMAs this process could not be resolved, this being an effect of the one-side grafted chain on the comb backbone. The revealed variations in molecular mobility and crystallization behavior suggest the potentially manipulable diffusion of small molecules throughout the polymer volume, via both the molecular architecture as well as the thermal treatment. This ability is extremely useful for these novel materials, envisaging their future applications in biomedicine (drug encapsulation).

Drug encapsulation into amphiphilic block copolymer micelles aims to increase drug solubility and minimize drug degradation upon administration, avoid undesirable side effects and ameliorate drug bioavailability. Drug encapsulation methodologies including thin-film hydration method and organic cosolvent method are described in this chapter. Often, it is desirable to determine the most efficient solubilization protocol leading to functional drug delivery nanovehicles in each case. The encapsulation of curcumin into PEO-b-PPO-b-PEO (Pluronic F-127) polymeric micelles through thin-film hydration method presents the most promising results. Indomethacin can be loaded successfully into the hydrophobic cores of PEO-b-PCL amphiphilic block copolymer micelles following both encapsulation protocols.

Drug encapsulation into amphiphilic block copolymer micelles aims to increase drug solubility and minimize drug degradation upon administration, avoid undesirable side effects and ameliorate drug bioavailability. Drug encapsulation methodologies including thin-film hydration method and organic cosolvent method are described in this chapter. Often, it is desirable to determine the most efficient solubilization protocol leading to functional drug delivery nanovehicles in each case. The encapsulation of curcumin into PEO-b-PPO-b-PEO (Pluronic F-127) polymeric micelles through thin-film hydration method presents the most promising results. Indomethacin can be loaded successfully into the hydrophobic cores of PEO-b-PCL amphiphilic block copolymer micelles following both encapsulation protocols.

In this study, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dioleoyl-3-dimethylammonium-propane (DAP) and amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PLMA-b-PDMAEMA) in the weight ratios: 1:0:0.03, 1:0.1:0.03, 1:0.3:0.03, 1:0.5:0.03, 1:0.7:0.03, and1:1:0.03, were used for the design and development of hybrid polymer-lipid nanostructures. The polymer-lipid nanostructures were prepared using the aqueous heat method. The pure lipid systems were used as reference systems. Differential Scanning Calorimetry (DSC) was utilized to investigate the interactions between the components. The presence of the polymeric guest caused different orientation of the polar groups of phospholipids, as the DSC thermotropic values revealed. The changes of the physicochemical characteristics of the systems with the increase of the weight ratio of DAP are more intense in comparison to those without this lipid due to the presence of the block copolymer, which contributes significantly to the repulsive interactions between the vesicles as a result of its positive charge. The only exception is the DSPC:DAP:PLMA-b-PDMAEMA nanosystem at 1:0.5:0.03 weight ratio, where the size of the polymer/lipid structures (Dh≈320 nm) increased and the ζ-potential decreased in absolute values in comparison with the systems with lower weight ratio of the DAP lipid. Cryogenic Transmission Electron Microscopy (cryo-TEM) images showed different structures which strongly depend on the composition of the system, ranging from lamella structures, disc forms, and “spaghetti” morphologies. Based on toxicity studies, it was found all samples are biocompatible and show a dose-dependent cytotoxicity on HEK293 (Human Embryonic Kidney 293 cell line). In conclusion, we developed polymer/lipid nanostructures with knowledge of their structural and physicochemical characteristics, useful as drug or antigen delivery platforms.

Chimeric/mixed stimuli-responsive nanocarriers are promising agents for therapeutic and diagnostic applications, as well as in the combinatorial field of theranostics. Herein, we designed chimeric nanosystems, composed of natural phospholipid and pH-sensitive amphiphilic diblock copolymer, in different molar ratios and assessed the polymer lyotropic effect on their properties. Initially, polymer-grafted bilayers were evaluated for their thermotropic behavior by thermal analysis. Chimeric liposomes were prepared through thin-film hydration and the obtained vesicles were studied by light scattering techniques, to measure their physicochemical characteristics and colloidal stability, as well as by imaging techniques, to elucidate their global and membrane morphology. Finally, in vitro screening of the systems' toxicity was held. The copolymer effect on the membrane phase transition strongly depended on the pH of the surrounding environment. Chimeric nanoparticles were around and above 100 nm, while electron microscopy revealed occasional morphology diversity, probably affecting the toxicity of the systems. The latter was assessed to be tolerable, while dependent on the nanosystems' material concentration, polymer concentration, and polymer composition. All experiments suggested that the thermodynamic and biophysical properties of the nanosystems are copolymer-composition- and concentration-dependent, since different amounts of incorporated polymer would produce divergent effects on the lyotropic liquid crystal membrane. Certain chimeric systems can be exploited as advanced drug delivery nanosystems, based on their overall promising profiles.

There is an emerging need to evolve the conventional lyotropic liquid crystalline nanoparticles to advanced stimuli-responsive, therapeutic nanosystems with upgraded functionality. Towards this effort, typically used stabilizers, such as Pluronics&reg, can be combined or replaced by smart, stimuli-responsive block copolymers. The aim of this study is to incorporate the stimuli-responsive amphiphilic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) as a stabilizer in lipidic liquid crystalline nanoparticles, in order to provide steric stabilization and simultaneous stimuli-responsiveness. The physicochemical and morphological characteristics of the prepared nanosystems were investigated by light scattering techniques, cryogenic-transmission electron microscopy (cryo-TEM), X-ray diffraction (XRD) and fluorescence spectroscopy. The PDMAEMA-b-PLMA, either individually or combined with Poloxamer 407, exhibited different modes of stabilization depending on the lipid used. Due to the protonation ability of PDMAEMA blocks in acidic pH, the nanoparticles exhibited high positive charge, as well as pH-responsive charge conversion, which can be exploited towards pharmaceutical applications. The ionic strength, temperature and serum proteins influenced the physicochemical behavior of the nanoparticles, while the polymer concentration differentiated their morphology, their micropolarity and microfluidity were also evaluated. The proposed liquid crystalline nanosystems can be considered as novel and attractive pH-responsive drug and gene delivery nanocarriers due to their polycationic content.

Physicochemical characteristics and biological performance of polyplexes based on two identical copolymers bearing tertiary amino or quaternary ammonium groups are evaluated and compared. Poly(2-(dimethylamino)ethyl methacrylate)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) block copolymer (PDMAEMA-b-POEGMA) is synthesized by reversible addition fragmentation chain transfer polymerization. The tertiary amines of PDMAEMA are converted to quaternary ammonium groups by quaternization with methyl iodide. The two copolymers spontaneously formed well-defined polyplexes with DNA. The size, zeta potential, molar mass, aggregation number, and morphology of the polyplex particles are determined. The parent PDMAEMA-b-POEGMA exhibits larger buffering capacity, whereas the corresponding quaternized copolymer (QPDMAEMA-b-POEGMA) displays stronger binding affinity to DNA, yielding invariably larger in size and molar mass particles bearing greater number of DNA molecules per particle. Experiments revealed that QPDMAEMA-b-POEGMA is more effective in transfecting pEGFP-N1 than the parent copolymer, attributed to the larger size, molar mass, and DNA cargo, as well as to the effective cellular traffic, which dominated over the enhanced ability for endo-lysosomal escape of PDMAEMA-b-POEGMA.

Non-lamellar liquid crystalline nanoparticles are promising drug delivery lipidic nanosystems, stabilized by amphiphilic block copolymers. In the present investigation, the widely used Poloxamer P407 is compared with the innovative stimuli-responsive polycationic block copolymer poly(2-(dimethylamino)ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) as stabilizer for glyceryl monooleate (GMO) or phytantriol (PHYT)-based colloidal dispersions of liquid crystalline nanoparticles. As such, a variety of techniques was combined in order to comprehensively characterize these nanosystems in terms of physicochemical, morphological and thermal properties. Particle size, size distribution, ζ-potential and the fractal dimension parameter (df), calculated from light scattering data, as well as the morphology (from cryo-TEM analysis) of nanoparticles were markedly affected by the different lipid and type of polymeric stabilizer, indicating different kind of interfacial lipid-polymer interactions. Notably, PDMAEMA-b-PLMA block copolymer was effective as well as P407 in stabilizing the GMO-based, but not PHYT-based nanosystems. Furthermore, microcalorimetry, high-resolution ultrasound spectroscopy and rheology were applied to characterize the thermal behavior of these nanosystems, highlighting their transition temperatures. In conclusion, a detailed evaluation was carried out on liquid crystalline nanoparticles, providing significant information, useful for the development of innovative non-lamellar therapeutic nanosystems with advanced properties that can be successfully applied in the pharmaceutical nanotechnology field.

Different in nature biomaterials, which are used for the development of drug delivery nanosystems, could be mixed, in order to produce chimeric/mixed nanostructures. Their morphological characteristics and biophysical properties depend on the degree of association and interactions between the self-assembling biomaterials. For the purpose of this study, chimeric nanosystems composed of phospholipid and amphiphilic diblock copolymers were developed, at different molar ratios. Light scattering and imaging techniques were employed, in order to extract information on the nanostructure physicochemical characteristics and their morphology. Certain morphological characteristics were assessed for vesicle membranes, which are considered to be of paramount importance for their fate inside the physiological environment and their biophysical behavior. Besides vesicles, a variety of structures appeared in the phospholipid/copolymer chimeric systems, depending on both the composition and the concentration of the utilized polymer, declaring the lyotropic effect on the self-assembly of the biomaterials. The size range of most objects, including vesicles, was around 100 nm. Membrane irregularities, such as domains and rafts, are considered as functional biophysical factors, rendering liposomes appropriate artificial models for approaching various diseases on the level of living cell membranes. Such information is of paramount importance for the utilization of chimeric nanostructures in drug delivery and in therapy.