Search

Transmembrane receptors that endow mammalian cells with the ability to sense and respond to biomaterial-bound ligands will prove instrumental in bridging the fields of synthetic biology and biomaterials. Materials formed with thiol-norbornene chemistry are amenable to thiol-peptide patterning, and this study reports the rational design of synthetic receptors that reversibly activate cellular responses based on peptide-ligand recognition. This transmembrane receptor platform, termed Extracellular Peptide-ligand Dimerization Actuator (EPDA), consists of stimulatory or inhibitory receptor pairs that come together upon extracellular peptide dimer binding with corresponding monobody receptors. Intracellularly, Stimulatory EPDAs phosphorylate a substrate that merges two protein halves, whereas Inhibitory EPDAs revert split proteins back to their unmerged, inactive state via substrate dephosphorylation. To identify ligand-receptor pairs, over 2000 candidate monobodies were built in silico using PETEI, a novel computational algorithm we developed. The top 30 monobodies based on predicted peptide binding affinity were tested experimentally, and monobodies that induced the highest change in protein merging (green fluorescent protein, GFP) were incorporated in the final EPDA receptor design. In soluble form, stimulatory peptides induce intracellular GFP merging in a time- and concentration-dependent manner, and varying levels of green fluorescence were observed based on stimulatory and inhibitory peptide-ligand dosing. EPDA-programmed cells encapsulated in thiol-norbornene hydrogels patterned with stimulatory and inhibitory domains exhibited 3D activation or deactivation based on their location within peptide-patterned hydrogels. EPDA receptors can recognize a myriad of peptide-ligands bound to 3D materials, can reversibly induce cellular responses beyond fluorescence, and are widely applicable in biological research and regenerative medicine.

Fiber-reinforcement approaches have been used to replace aligned tissues with engineered constructs after injury or surgical resection, strengthening soft biomaterial scaffolds and replicating anisotropic, load-bearing properties. However, most studies focus on the macroscale aspects of these scaffolds, rarely considering the cell-biomaterial interactions that govern remodeling and extracellular matrix organization toward aligned neo-tissues. As initial cell-biomaterial responses within fiber-reinforced microenvironments likely influence the long-term efficacy of repair and regeneration strategies, here we elucidate the roles of spatial orientation, substrate stiffness, and matrix remodeling on early cell-fiber interactions. Bovine mesenchymal stromal cells (MSCs) were cultured in soft fibrin gels reinforced with a stiff 100 µm polyglycolide-co-caprolactone fiber. Gel stiffness and remodeling capacity were modulated by fibrinogen concentration and aprotinin treatment, respectively. MSCs were imaged at 3 days and evaluated for morphology, mechanoresponsiveness (nuclear Yes-associated protein [YAP] localization), and spatial features including distance and angle deviation from fiber. Within these constructs, morphological conformity decreased as a function of distance from fiber. However, these correlations were weak ( R 2 = 0.01043 for conformity and R 2 = 0.05542 for nuclear YAP localization), illustrating cellular heterogeneity within fiber-enforced microenvironments. To better assess cell-fiber interactions, we applied machine-learning strategies to our heterogeneous dataset of cell-shape and mechanoresponsive parameters. Principal component analysis (PCA) was used to project 23 input parameters (not including distance) onto 5 principal components (PCs), followed by agglomerative hierarchical clustering to classify cells into 3 groups. These clusters exhibited distinct levels of morpho-mechanoresponse (combination of morphological conformity and YAP signaling) and were classified as high response (HR), medium response (MR), and low response (LR) clusters. Cluster distribution varied spatially, with most cells (61%) closest to the fiber (0-75 µm) belonging to the HR cluster, and most cells (55%) furthest from the fiber (225-300 µm) belonging to the LR cluster. Modulation of gel stiffness and fibrin remodeling showed differential effects for HR cells, with stiffness influencing the level of mechanoresponse and remodeling capacity influencing the location of responding cells. Together, these novel findings demonstrate early trends in cellular patterning of the fiber-reinforced microenvironment, showing how spatial orientation, substrate biophysical properties, and matrix remodeling may guide the amplitude and localization of cellular mechanoresponses. These trends may guide approaches to optimize the design of microscale scaffold architecture and substrate properties for enhancing organized tissue assembly at the macroscale.

Osteoporosis is the most common chronic metabolic bone disease, and the prevalence of osteoporotic fractures is rapidly increasing with the aging population. While bisphosphonates can reduce bone loss and risk of fracture, these drugs are systemic, rely on long-term use, and patient compliance is low. Recombinant human bone morphogenetic protein-2 (BMP-2) is an FDA-approved protein that can offer a more targeted therapeutic than systemic treatments. DWIVA is a peptide sequence corresponding to the wrist epitope of BMP-2, and DWIVA-functionalized hydrogels feature osteoinductive propertiesin vitro and in vivo. This study reports that self-forming DWIVA-functionalized hydrogels injected into the intramedullary canal of rat femurs induce a local increase in trabecular bone in as little as 2 weeks. Increases in bone volume, trabecular thickness, and trabeculae count from DWIVA-laden hydrogels persist for at least 4 weeks, and the inclusion of mesenchymal stem cells (MSCs) significantly enhances the development of mineralized bone. Histological analysis of decalcified femurs also shows that hydrogel injections containing DWIVA peptide and MSCs stimulate unmineralized bone tissue formation and induce an increased count of osteoblasts and osteoclasts at the injection site after 4 weeks. Overall, the MSC-laden DWIVA peptide-functionalized hydrogels presented rapidly induce targeted bone formation and have the potential to form nascent bone within bones in jeopardy of an osteoporotic fracture such as the femur., (© 2024 The Authors. Journal of Orthopaedic Research® published by Wiley Periodicals LLC on behalf of Orthopaedic Research Society.)

Staphylococcus aureus ( S. aureus ) is an opportunistic pathogen that lives on surfaces and skin and can cause serious infections inside the body. Antimicrobial peptides (AMPs) are part of the innate immune system and can eliminate pathogens, including bacteria and viruses, and are a promising alternative to antibiotics. Although studies have reported that AMP-functionalized hydrogels can prevent bacterial adhesion and biofilm formation, AMP dosing and the combined effects of multiple AMPs are not well understood. Here, three AMPs with different antibacterial properties were synthesized and the soluble minimum inhibitory concentrations (MICs) of each AMP against methicillin-susceptible S. aureus (MSSA) and methicillin-resistant S. aureus (MRSA) were determined. Hydrogels with immobilized AMPs at their MIC (DD 13 -RIP 27.5 µM; indolicidin 43.8 µM; P10 120 µM) were effective in preventing MRSA adhesion and biofilm formation. Checkerboard AMP screens identified synergy between indolicidin (3.1 µM) and P10 (12.5 µM) based on soluble fractional inhibitory concentration indices (FICIs) against MRSA, and hydrogels formed with these AMPs at half of their synergistic concentrations (total peptide concentration, 7.8 µM) were highly efficacious in killing MRSA. Mammalian cells cultured atop these hydrogels were highly viable, demonstrating that these AMP hydrogels are biocompatible and selectively eradicate bacteria, based on soluble checkerboard-screening data.

Background: We compared rates of successful polyethylene glycol (PEG) nerve fusion between two epineural suture repairs (2SR) and five epineural suture repairs (5SR) in a rat sciatic nerve transection neurorrhaphy model. We hypothesise that the two and five epineural neural suture repair groups will achieve a similar rate of PEG fusion., Methods: Twenty-five Lewis rats underwent bilateral sciatic nerve transection. Primary neurorrhaphy (PN) consisting of 2SR in one hind limb and 5SR in the contralateral hind limb was performed utilizing PEG fusion. Successful PEG fusion was confirmed by a distal muscle twitch after nerve stimulation proximal to the nerve fusion site. Sciatic nerve conduction velocity (SNCV) across the repair site and the force generated by tibialis anterior muscle (TAM) contraction were also compared between the 2SR and 5SR groups., Results: Success rates were 100% for the 2SR and the 5SR groups. No statistically significant differences in SNCV ( P = 0.444) or isometric tetanic TAM contractile force ( P = 0.820) were observed between 2SR and 5SR in the setting of PEG fusion., Conclusion: These findings demonstrate no significant difference in successful PEG fusion between the 2SR and 5SR groups. In addition, the findings demonstrate no statistically significant differences in SNCV or isometric tetanic TAM contractile force following sciatic nerve transection when performing a 2SR or 5SR PN in the setting of PEG fusion. Successful PEG fusion can be achieved acutely with either a two or five-epineural suture repair in a rat model., Competing Interests: There are no conflicts of interest., (Copyright: © 2024 Surgical Neurology International.)

A major aim in the field of synthetic biology is developing tools capable of responding to user-defined inputs by activating therapeutically relevant cellular functions. Gene transcription and regulation in response to external stimuli are some of the most powerful and versatile of these cellular functions being explored. Motivated by the success of chimeric antigen receptor (CAR) T-cell therapies, transmembrane receptor-based platforms have been embraced for their ability to sense extracellular ligands and to subsequently activate intracellular signal transduction. The integration of transmembrane receptors with transcriptional activation platforms has not yet achieved its full potential. Transient expression of plasmid DNA is often used to explore gene regulation platforms in vitro. However, applications capable of targeting therapeutically relevant endogenous or stably integrated genes are more clinically relevant. Gene regulation may allow for engineered cells to traffic into tissues of interest and secrete functional proteins into the extracellular space or to differentiate into functional cells. Transmembrane receptors that regulate transcription have the potential to revolutionize cell therapies in a myriad of applications, including cancer treatment and regenerative medicine. In this review, we will examine current engineering approaches to control transcription in mammalian cells with an emphasis on systems that can be selectively activated in response to extracellular signals. We will also speculate on the potential therapeutic applications of these technologies and examine promising approaches to expand their capabilities and tighten the control of gene regulation in cellular therapies., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Sebastian Vega reports financial support was provided by National Science Foundation. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Hydrogels are a class of soft biomaterials and the material of choice for a myriad of biomedical applications due to their biocompatibility and highly tunable mechanical and biochemical properties. Specifically, light-mediated thiol-norbornene click reactions between norbornene-modified macromers and di-thiolated crosslinkers can be used to form base hydrogels amenable to spatial biochemical modifications via subsequent light reactions between pendant norbornenes in the hydrogel network and thiolated peptides. Macromers derived from natural sources (e.g., hyaluronic acid, gelatin, alginate) can cause off-target cell signaling, and this has motivated the use of synthetic macromers such as poly(ethylene glycol) (PEG). In this study, commercially available 8-arm norbornene-modified PEG (PEG-Nor) macromers were reacted with di-thiolated crosslinkers (dithiothreitol, DTT) to form synthetic hydrogels. By varying the PEG-Nor weight percent or DTT concentration, hydrogels with a stiffness range of 3.3 kPa-31.3 kPa were formed. Pendant norbornene groups in these hydrogels were used for secondary reactions to either increase hydrogel stiffness (by reacting with DTT) or to tether mono-thiolated peptides to the hydrogel network. Peptide functionalization has no effect on bulk hydrogel mechanics, and this confirms that mechanical and biochemical signals can be independently controlled. Using photomasks, thiolated peptides can also be photopatterned onto base hydrogels, and mesenchymal stem cells (MSCs) attach and spread on RGD-functionalized PEG-Nor hydrogels. MSCs encapsulated in PEG-Nor hydrogels are also highly viable, demonstrating the ability of this platform to form biocompatible hydrogels for 2D and 3D cell culture with user-defined mechanical and biochemical properties.

Background: Polyethylene glycol (PEG) is a synthetic, biodegradable, and hyperosmotic material promising in the treatment of acute peripheral nerve injuries. Our team set out to investigate the impact of fibrin glue upon PEG fusion in a rat model., Methods: Eighteen rats underwent sciatic nerve transection and PEG fusion. Electrophysiologic testing was performed to measure nerve function and distal muscle twitch. Fibrin glue was applied and testing repeated. Due to preliminary findings, fibrin glue was applied to an uncut nerve in five rodents and testing was conducted before and after glue application. Mann-Whitney U tests were used to compare median values between outcome measures. A Shapiro-Wilk test was used to determine normality of data for each comparison, significance set at a P value less than 0.05., Results: PEG fusion was confirmed in 13 nerves with no significant change in amplitude ( P = 0.054), latency ( P = 0.114), or conduction velocity ( P = 0.114). Stimulation of nerves following PEG fusion produced distal muscle contraction in 100% of nerves. Following application of fibrin glue, there was a significant reduction in latency ( P = 0.023), amplitude ( P < 0.001), and conduction velocity ( P = 0.023). Stimulation of the nerve after application of fibrin glue did not produce distal muscle twitch. Five uncut nerves with fibrin glue application blocked distal muscle contraction following stimulation., Conclusions: Our data suggest that fibrin glue alters the nerve's function. The immediate confirmation of PEG fusion via distal muscle twitch is blocked with application fibrin glue in this experimental model. Survival and functional outcome studies are necessary to understand if this has implications on the long-term functional outcomes., Competing Interests: The authors have no financial interest to declare in relation to the content of this article. This project received grant funding from the AFSH resident fast track grant., (Copyright © 2024 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of The American Society of Plastic Surgeons.)

Recent developments in digital light processing (DLP) can advance the structural and biochemical complexity of perfusable in vitro models of the blood-brain barrier. Here, we describe a strategy to functionalize complex, DLP-printed vascular models with multiple peptide motifs in a single hydrogel. Different peptides can be clicked into the walls of distinct topologies, or the peptide motifs lining channel walls can differ from those in the bulk of the hydrogel. The flexibility of this approach is used to both characterize the effects of various bioactive domains on endothelial coverage and tight junction formation, in addition to facilitating astrocyte attachment in the hydrogel surrounding the endothelialized vessel to mimic endothelial-astrocyte interaction. Peptides derived from proteins mediating cell-extracellular matrix (e.g. RGD and IKVAV) and cell-cell (e.g. HAVDI) adhesions are used to mediate endothelial cell attachment and coverage. HAVDI and IKVAV-lined channels exhibit significantly greater endothelialization and increased zonula-occluden-1 (ZO-1) localization to cell-cell junctions of endothelial cells, indicative of tight junction formation. RGD is then used in the bulk hydrogel to create an endothelial-astrocyte co-culture model of the blood-brain barrier that overcomes the limitations of previous platforms incapable of complex topology or tunable bioactive domains. This approach yields an adjustable, biofabricated platform to interrogate the effects of cell-matrix interaction on blood-brain barrier mechanobiology., (Creative Commons Attribution license.)

Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.

Although photopolymerization reactions are commonly used to form hydrogels, these strategies rely on light and may not be suitable for delivering therapeutics in a minimally invasive manner. Here, hyaluronic acid (HA) macromers are modified with norbornene (Nor) or tetrazine (Tet) and upon mixing click into covalently crosslinked Nor-Tet hydrogels via a Diels-Alder reaction. By incorporating a high degree of Nor and Tet substitution, Nor-Tet hydrogels with a broad range in elastic moduli (5 to 30 kPa) and fast gelation times (1 to 5 min) are achieved. By pre-coupling methacrylated HANor macromers with thiolated peptides via a Michael addition reaction, Nor-Tet hydrogels are peptide-functionalized without affecting their physical properties. Mesenchymal stem cells (MSCs) on RGD-functionalized Nor-Tet hydrogels adhere and exhibit stiffness-dependent differences in matrix mechanosensing. Fluid properties of Nor-Tet hydrogel solutions allow for injections through narrow syringe needles and can locally deliver viable cells and peptides. Substituting HA with enzymatically degradable gelatin also results in cell-responsive Nor-Tet hydrogels, and MSCs encapsulated in Nor-Tet hydrogels preferentially differentiate into adipocytes or osteoblasts, based on 3D cellular spreading regulated by stable (HA) and degradable (gelatin) macromers., (© 2022 Wiley-VCH GmbH.)

Introduction: Plant tissues are plentiful, diverse, and due to convergent evolution are structurally similar to many animal tissues. Decellularized plant tissues feature microtopographies that resemble cancellous bone (porous parenchyma) and skeletal muscle (fibrous vascular bundles). However, the use of plant tissues as an inexpensive and abundant biomaterial for controlling stem cell behavior has not been widely explored., Methods: Celery plant tissues were cut cross-sectionally (porous parenchyma) or longitudinally (fibrous vascular bundles) and decellularized. Human mesenchymal stem cells (MSCs) were then cultured atop plant tissues and confocal imaging of single cells was used to evaluate the early effects of microtopography on MSC adhesion, morphology, cytoskeletal alignment, Yes-associated protein (YAP) signaling, and downstream lineage commitment to osteogenic or myogenic phenotypes., Results: Microtopography was conserved post plant tissue decellularization and MSCs attached and proliferated on plant tissues. MSCs cultured on porous parenchyma spread isotropically along the periphery of plant tissue pores. In contrast, MSCs cultured on vascular bundles spread anisotropically and aligned in the direction of fibrous vascular bundles. Differences in microtopography also influenced MSC nuclear YAP localization and actin anisotropy, with higher values observed on fibrous tissues. When exposed to osteogenic or myogenic culture medium, MSCs on porous parenchyma had a higher percentage of cells stain positive for bone biomarker alkaline phosphatase, whereas myoblast determination protein 1 (MyoD) was significantly upregulated for MSCs on fibrous vascular bundles., Conclusions: Together, these results show that plant tissues are an abundant biomaterial with defined microarchitecture that can reproducibly regulate MSC morphology, mechanosensing, and differentiation., Supplementary Information: The online version of this article contains supplementary material available 10.1007/s12195-022-00737-9., (© The Author(s) under exclusive licence to Biomedical Engineering Society 2022, Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The clinical translation of mesenchymal stem cells (MSCs) is limited by population heterogeneity and inconsistent responses to engineered signals. Specifically, the extent in which MSCs respond to mechanical cues varies significantly across MSC lines. Although induced pluripotent stem cells (iPSCs) have recently emerged as a novel cell source for creating highly homogeneous MSC (iMSC) lines, cellular mechanosensing of iMSCs on engineered materials with defined mechanics is not well understood. Here, we tested the mechanosensing properties of three human iMSC lines derived from iPSCs generated using a fully automated platform. Stiffness-driven changes in morphology were comparable between MSCs and iMSCs cultured atop hydrogels of different stiffness. However, contrary to tissue derived MSCs, no significant changes in iMSC morphology were observed between iMSC lines atop different stiffness hydrogels, demonstrating a consistent response to mechanical signals. Further, stiffness-driven changes in mechanosensitive biomarkers were more pronounced in iMSCs than MSCs, which shows that iMSCs are more adaptive and responsive to mechanical cues than MSCs. This study reports that iMSCs are a promising stem cell source for basic and applied research due to their homogeneity and high sensitivity to engineered mechanical signals., (© 2022. The Author(s).)

Cells encapsulated in 3D hydrogels exhibit differences in cellular mechanosensing based on their ability to remodel their surrounding hydrogel environment. Although cells in tissue interfaces feature a range of mechanosensitive states, it is challenging to recreate this in 3D biomaterials. Human mesenchymal stem cells (MSCs) encapsulated in methacrylated gelatin (GelMe) hydrogels remodel their local hydrogel environment in a time-dependent manner, with a significant increase in cell volume and nuclear Yes-associated protein (YAP) localization between 3 and 5 days in culture. A finite element analysis model of compression showed spatial differences in hydrogel stress of compressed GelMe hydrogels, and MSC-laden GelMe hydrogels were compressed (0-50%) for 3 days to evaluate the role of spatial differences in hydrogel stress on 3D cellular mechanosensing. MSCs in the edge (high stress) were significantly larger, less round, and had increased nuclear YAP in comparison to MSCs in the center (low stress) of 25% compressed GelMe hydrogels. At 50% compression, GelMe hydrogels were under high stress throughout, and this resulted in a consistent increase in MSC volume and nuclear YAP across the entire hydrogel. To recreate heterogeneous mechanical signals present in tissue interfaces, porous polycaprolactone (PCL) scaffolds were perfused with an MSC-laden GelMe hydrogel solution. MSCs in different pore diameter (~280-430 μm) constructs showed an increased range in morphology and nuclear YAP with increasing pore size. Hydrogel stress influences MSC mechanosensing, and porous scaffold-hydrogel composites that expose MSCs to diverse mechanical signals are a unique biomaterial for studying and designing tissue interfaces., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 DiCerbo, Benmassaoud and Vega.)

Recent far-reaching advances in synthetic biology have yielded exciting tools for the creation of new materials. Conversely, advances in the fundamental understanding of soft-condensed matter, polymers and biomaterials offer new avenues to extend the reach of synthetic biology. The broad and exciting range of possible applications have substantial implications to address grand challenges in health, biotechnology and sustainability. Despite the potentially transformative impact that lies at the interface of synthetic biology and biomaterials, the two fields have, so far, progressed mostly separately. This Perspective provides a review of recent key advances in these two fields, and a roadmap for collaboration at the interface between the two communities. We highlight the near-term applications of this interface to the development of hierarchically structured biomaterials, from bioinspired building blocks to 'living' materials that sense and respond based on the reciprocal interactions between materials and embedded cells., (© 2022. Springer Nature Limited.)

Osteoporosis is a disease characterized by a decrease in bone mineral density, thereby increasing the risk of sustaining a fragility fracture. Most medical therapies are systemic and do not restore bone in areas of need, leading to undesirable side effects. Injectable hydrogels can locally deliver therapeutics with spatial precision, and this study reports the development of an injectable hydrogel containing a peptide mimic of bone morphogenetic protein-2 (BMP-2). To create injectable hydrogels, hyaluronic acid was modified with norbornene (HANor) or tetrazine (HATet) which upon mixing click into covalently crosslinked Nor-Tet hydrogels. By modifying HANor macromers with methacrylates (Me), thiolated BMP-2 mimetic peptides were immobilized to HANor via a Michael addition reaction, and coupling was confirmed with 1H NMR spectroscopy. BMP-2 peptides presented in soluble and immobilized form increased alkaline phosphatase (ALP) expression in MSCs cultured on 2D and encapsulated in 3D Nor-Tet hydrogels. Injection of bioactive Nor-Tet hydrogels into hollow intramedullary canals of Lewis rat femurs showed a local increase in trabecular bone density as determined by micro-CT imaging. The presented work shows that injectable hydrogels with immobilized BMP-2 peptides are a promising biomaterial for the local regeneration of bone tissue and for the potential local treatment of osteoporosis., Competing Interests: Conflict of interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Mechanical cues induce a variety of downstream effects on cells, including the regulation of stem cell behavior. Cell fate is typically characterized on biomaterial substrates where mechanical and chemical properties can be precisely tuned; however, most of these substrates do not recapitulate the biological complexity of the extracellular matrix (ECM). Here, hydrogels are engineered for mechanobiological studies using two major components of the ECM: hyaluronic acid (HA) and fibronectin (FN). Rather than typical surface chemisorption of FN to substrates, the system contains full-length FN covalently crosslinked to HA throughout the hydrogel. The control over the mechanical properties of the hydrogel independent of the concentration of FN and the ability to culture viable cells either on top or encapsulated within the hydrogels are shown. Interestingly, human mesenchymal stem cells (MSCs) experience an increase in nuclear translocation of the yes-associated protein (YAP) to the nucleus when cultured on (2D) substrates with increasing amounts of FN while maintaining constant hydrogel stiffness. However, this FN dependence on nuclear YAP translocation is not observed for MSCs encapsulated in (3D) hydrogels. This work develops complex hydrogels that recapitulate features of the ECM for the control of stem cells in both 2D and 3D environments., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

The extracellular matrix (ECM) of bone and cartilage presents stem cells with a dynamic and complex array of biochemical and biomechanical signals that regulate proliferation and differentiation into bone and cartilage tissue-producing cells. Due to the multitude of signals present in this ECM, it is challenging to develop biomaterials that accurately recapitulate bone and cartilage tissues, thereby limiting the ability to present cells with multiple factors for enhanced biomaterial-induced osteogenic and chondrogenic differentiation. Conventional techniques to evaluate stem cell responses to engineered materials are laborious and time-consuming, and high-throughput screening techniques can address these limitations. Our review overviews developmental environments and signals present in bone and cartilage ECM, with a focus on applying hydrogel-based screening approaches to identify biomaterial environments that promote stem cell-mediated bone and cartilage tissue regeneration., (© 2019 New York Academy of Sciences.)

Stem cells are adherent cells whose multipotency and differentiation can be regulated by numerous microenvironmental signals including soluble growth factors and surface topography. This study describes a simple method for creating distinct micropatterns via microphase separation resulting from polymer demixing of poly(desaminotyrosyl-tyrosine carbonate) (PDTEC) and polystyrene (PS). Substrates with co-continuous (ribbons) or discontinuous (islands and pits) PDTEC regions were obtained by varying the ratio of PDTEC and sacrificial PS. Human mesenchymal stem cells (MSCs) cultured on co-continuous PDTEC substrates for 3 days in bipotential adipogenic/osteogenic (AD/OS) induction medium showed no change in cell morphology but exhibited increased anisotropic cytoskeletal organization and larger focal adhesions when compared to MSCs cultured on discontinuous micropatterns. After 14 days in bipotential AD/OS induction medium, MSCs cultured on co-continuous micropatterns exhibited increased expression of osteogenic markers, whereas MSCs on discontinuous PDTEC substrates showed a low expression of adipogenic and osteogenic differentiation markers. Substrates with graded micropatterns were able to reproduce the influence of local underlying topography on MSC differentiation, thus demonstrating their potential for high throughput analysis. This work presents polymer demixing as a simple, non-lithographic technique to produce a wide range of micropatterns on surfaces with complex geometries to influence cellular and tissue regenerative responses., Statement of Significance: A better understanding of how engineered microenvironments influence stem cell differentiation is integral to increasing the use of stem cells and materials in a wide range of tissue engineering applications. In this study, we show the range of topography obtained by polymer demixing is sufficient for investigating how surface topography affects stem cell morphology and differentiation. Our findings show that co-continuous topographies favor early (3-day) cytoskeletal anisotropy and focal adhesion maturation as well as long-term (14-day) expression of osteogenic differentiation markers. Taken together, this study presents a simple approach to pattern topographies that induce divergent responses in stem cell morphology and differentiation., (Copyright © 2018. Published by Elsevier Ltd.)

The transmembrane glycoprotein N-cadherin (NCad) mediates cell-cell interactions found during mesenchymal condensation and chondrogenesis. Here, NCad-derived peptides (i.e., HAV) are incorporated into hyaluronic acid (HA) hydrogels with encapsulated mesenchymal stem cells (MSCs). Since the dose and timing of NCad signaling are dynamic, HAV peptide presentation is tuned via alterations in peptide concentration and incorporation of an ADAM10-cleavable domain between the hydrogel and the HAV motif, respectively. HA hydrogels functionalized with HAV result in dose-dependent increases in early chondrogenesis of encapsulated MSCs and resultant cartilage matrix production. For example, type II collagen and glycosaminoglycan production increase ≈9- and 2-fold with the highest dose of HAV (i.e., 2 × 10 -3 m), respectively, when compared to unmodified hydrogels, while incorporation of an efficient ADAM10-cleavable domain between the HAV peptide and hydrogel abolishes increases in chondrogenesis and matrix production. Treatment with a small-molecule ADAM10 inhibitor restores the functional effect of the HAV peptide, indicating that timing and duration of HAV peptide presentation is crucial for robust chondrogenesis. This study demonstrates a nuanced approach to the biofunctionalization of hydrogels to better emulate the complex cell microenvironment during embryogenesis toward stem-cell-based cartilage production., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

3D microenvironmental parameters control cell behavior, but can be challenging to investigate over a wide range of conditions. Here, a combinatorial hydrogel platform is developed that uses light-mediated thiol-norbornene chemistry to encapsulate cells within hydrogels with biochemical gradients made by spatially varied light exposure. Specifically, mesenchymal stem cells are photoencapsulated in norbornene-modified hyaluronic acid hydrogels functionalized with gradients (0-5 mM) of peptides that mimic cell-cell or cell-matrix interactions, either as single or orthogonal gradients. Chondrogenesis varied spatially in these hydrogels based on the local biochemical formulation, as indicated by Sox9 and aggrecan expression levels. From 100 combinations investigated, discrete hydrogels are formulated and early gene expression and long-term cartilage-specific matrix production are assayed and found to be consistent with screening predictions. This platform is a scalable, high-throughput technique that enables the screening of the effects of multiple biochemical signals on 3D cell behavior.

Mechanics of the extracellular matrix (ECM) play a pivotal role in governing cell behavior, such as cell spreading and differentiation. ECM mechanics have been recapitulated primarily in elastic hydrogels, including with dynamic properties to mimic complex behaviors (e.g., fibrosis); however, these dynamic hydrogels fail to introduce the viscoelastic nature of many tissues. Here, we developed a two-step crosslinking strategy to first form (via platinum-catalyzed crosslinking) networks of polydimethylsiloxane (PDMS) and then to increase PDMS crosslinking (via thiol-ene click reaction) in a temporally-controlled manner. This photoinitiated reaction increased the compressive modulus of PDMS up to 10-fold within minutes and was conducted under cytocompatible conditions. With stiffening, cells displayed increased spreading, changing from ∼1300 to 1900 μm 2 and from ∼2700 to 4600 μm 2 for fibroblasts and mesenchymal stem cells, respectively. In addition, higher myofibroblast activation (from ∼2 to 20%) for cardiac fibroblasts was observed with increasing PDMS substrate stiffness. These results indicate a cellular response to changes in PDMS substrate mechanics, along with a demonstration of a mechanically dynamic and photoresponsive PDMS substrate platform to model the dynamic behavior of ECM., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The relationship between ECM mechanics and cell behavior is dynamic, as cells remodel and respond to changes in their local environment. Most in vitro substrates are static and supraphysiologically stiff; thus, platforms with dynamic and reversible mechanical changes are needed. Herein, we developed hyaluronic acid-based substrates capable of sequential photodegradation and photoinitiated crosslinking reactions to soften and then stiffen the hydrogels over a physiologically relevant range of moduli. Reversible mechanical signaling to adhered cells was demonstrated with human mesenchymal stem cells. In situ hydrogel softening (from ca. 14 to 3.5 kPa) led to a decrease in the cell area and nuclear localization of YAP/TAZ, and subsequent stiffening (from ca. 3.5 to 28 kPa) increased the cell area and nuclear localization of YAP/TAZ. Each photoreaction was cytocompatible and tunable, rendering this platform amenable to studies of dynamic mechanics on cell behavior across many cell types and contexts., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Stem and progenitor cells that exhibit significant regenerative potential and critical roles in cancer initiation and progression remain difficult to characterize. Cell fates are determined by reciprocal signaling between the cell microenvironment and the nucleus; hence parameters derived from nuclear remodeling are ideal candidates for stem/progenitor cell characterization. Here we applied high-content, single cell analysis of nuclear shape and organization to examine stem and progenitor cells destined to distinct differentiation endpoints, yet undistinguishable by conventional methods. Nuclear descriptors defined through image informatics classified mesenchymal stem cells poised to either adipogenic or osteogenic differentiation, and oligodendrocyte precursors isolated from different regions of the brain and destined to distinct astrocyte subtypes. Nuclear descriptors also revealed early changes in stem cells after chemical oncogenesis, allowing the identification of a class of cancer-mitigating biomaterials. To capture the metrology of nuclear changes, we developed a simple and quantitative "imaging-derived" parsing index, which reflects the dynamic evolution of the high-dimensional space of nuclear organizational features. A comparative analysis of parsing outcomes via either nuclear shape or textural metrics of the nuclear structural protein NuMA indicates the nuclear shape alone is a weak phenotypic predictor. In contrast, variations in the NuMA organization parsed emergent cell phenotypes and discerned emergent stages of stem cell transformation, supporting a prognosticating role for this protein in the outcomes of nuclear functions., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Articular cartilage is a load-bearing tissue that lines the surface of bones in diarthrodial joints. Unfortunately, this avascular tissue has a limited capacity for intrinsic repair. Treatment options for articular cartilage defects include microfracture and arthroplasty; however, these strategies fail to generate tissue that adequately restores damaged cartilage. Limitations of current treatments for cartilage defects have prompted the field of cartilage tissue engineering, which seeks to integrate engineering and biological principles to promote the growth of new cartilage to replace damaged tissue. To date, a wide range of scaffolds and cell sources have emerged with a focus on recapitulating the microenvironments present during development or in adult tissue, in order to induce the formation of cartilaginous constructs with biochemical and mechanical properties of native tissue. Hydrogels have emerged as a promising scaffold due to the wide range of possible properties and the ability to entrap cells within the material. Towards improving cartilage repair, hydrogel design has advanced in recent years to improve their utility. Some of these advances include the development of improved network crosslinking (e.g. double-networks), new techniques to process hydrogels (e.g. 3D printing) and better incorporation of biological signals (e.g. controlled release). This review summarises these innovative approaches to engineer hydrogels towards cartilage repair, with an eye towards eventual clinical translation.

Improved fundamental understanding of how cells interpret microenvironmental signals is integral to designing better biomaterial therapies. YAP/TAZ are key mediators of mechanosensitive signaling; however, it is not clear how they are regulated by the complex interplay of microenvironmental factors (e.g., stiffness and degradability) and culture dimensionality. Using covalently crosslinked norbornene-functionalized hyaluronic acid (HA) hydrogels with controlled stiffness (via crosslink density) and degradability (via susceptibility of crosslinks to proteolysis), we found that human mesenchymal stem cells (MSCs) displayed increased spreading and YAP/TAZ nuclear localization when cultured atop stiffer hydrogels; however, the opposite trend was observed when MSCs were encapsulated within degradable hydrogels. When stiffness-matched hydrogels of reduced degradability were used, YAP/TAZ nuclear translocation was greater in cells that were able to spread, which was confirmed through pharmacological inhibition of YAP/TAZ and actin polymerization. Together, these data illustrate that YAP/TAZ signaling is responsive to hydrogel stiffness and degradability, but the outcome is dependent on the dimensionality of cell-biomaterial interactions., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

N-cadherin (Ncad) mediates cell-cell interactions, regulates β-catenin (βcat) signaling, and promotes the chondrogenic differentiation of mesenchymal lineage cells. Here, we utilized confocal imaging to investigate the influence of Ncad interactions on single mesenchymal stem cell (MSC) behavior within 3-dimensional hydrogel environments under conditions that promote chondrogenic differentiation. Human MSCs were photoencapsulated in hyaluronic acid hydrogels functionalized with Ncad mimetic peptides and compared to cells in environments with control non-active peptides (Ctrl). Using single-cell imaging, we observed a significant increase in membrane βcat, nuclear βcat, and cell roundness after 3 days in Ncad hydrogels compared to Ctrl hydrogels. The extent of membrane and nuclear βcat localization and MSC roundness decreased to Ctrl hydrogel levels via pre-treatment with Ncad-specific antibodies prior to encapsulation in the Ncad hydrogels, confirming the activity of the peptide. Interestingly, there was a pronounced (>80%) increase in βcat nuclear localization in two-cell clusters within the Ctrl hydrogels, which was much greater than the increase (~30%) in βcat nuclear localization in two-cell clusters within the Ncad hydrogels. In summary, we utilized fluorescent imaging to demonstrate Ncad-mediated single cell responses to developmental cues within hydrogels towards chondrogenesis.

Stem cell fates on biomaterials are influenced by the complex confluence of microenvironmental cues emanating from soluble growth factors, cell-to-cell contacts, and biomaterial properties. Cell-microenvironment interactions influence the cell fate by initiating a series of outside-in signaling events that traverse from the focal adhesions to the nucleus via the cytoskeleton and modulate the sub-nuclear protein organization and gene expression. Here, we report a novel imaging-based framework that highlights the spatial organization of sub-nuclear proteins, specifically the splicing factor SC-35 in the nucleoplasm, as an integrative marker to distinguish between minute differences of stem cell lineage pathways in response to stimulatory soluble factors, surface topologies, and microscale topographies. This framework involves the high resolution image acquisition of SC-35 domains and imaging-based feature extraction to obtain quantitative nuclear metrics in tandem with machine learning approaches to generate a predictive cell state classification model. The acquired SC-35 metrics led to >90% correct classification of emergent human mesenchymal stem cell (hMSC) phenotypes in populations of hMSCs exposed for merely 3 days to basal, adipogenic, or osteogenic soluble cues, as well as varying levels of dexamethasone-induced alkaline phosphatase (ALP) expression. Early osteogenic cellular responses across a series of surface patterns, fibrous scaffolds, and micropillars were also detected and classified using this imaging-based methodology. Complex cell states resulting from inhibition of RhoGTPase, β-catenin, and FAK could be classified with >90% sensitivity on the basis of differences in the SC-35 organizational metrics. This indicates that SC-35 organization is sensitively impacted by adhesion-related signaling molecules that regulate osteogenic differentiation. Our results show that diverse microenvironment cues affect different attributes of the SC-35 organizational metrics and lead to distinct emergent organizational patterns. Taken together, these studies demonstrate that the early organization of SC-35 domains could serve as a "fingerprint" of the intracellular mechanotransductive signaling that governs growth factor- and topography-responsive stem cell states.

We use broadband coherent anti-Stokes Raman scattering (BCARS) microscopy to characterize lineage commitment of individual human mesenchymal stem cells cultured in adipogenic, osteogenic, and basal culture media. We treat hyperspectral images obtained by BCARS in two independent ways, obtaining robust metrics for differentiation. In one approach, pixel counts corresponding to functional markers, lipids, and minerals, are used to classify individual cells as belonging to one of the three lineage groups: adipocytes, osteoblasts, and undifferentiated stem cells. In the second approach, we use multivariate analysis of Raman spectra averaged exclusively over cytosol regions of individual cells to classify the cells into the same three groups, with consistent results. The exceptionally high speed of spectral imaging with BCARS allows us to chemically map a large number of cells with high spatial resolution, revealing not only the phenotype of individual cells, but also population heterogeneity in the degree of phenotype commitment.

Surface erosion has been recognized as a valuable design tool for resorbable biomaterials within the context of drug delivery devices, surface coatings, and when precise control of strength retention is critical. Here we report on high tensile strength, aromatic-aliphatic polycarbonates based on natural phenols, tyrosol (Ty) and homovanillyl alcohol (Hva), that exhibit enzymatic surface erosion by lipase. The Young's moduli of the polymers for dry and fully hydrated samples are 1.0 to 1.2 GPa and 0.8 to 1.2 GPa, respectively. Typical characteristics of enzymatic surface erosion were confirmed for poly(tyrosol carbonate) films with concomitant mass-loss and thickness-loss at linear rates of 0.14 ± 0.01 mg cm(-2) d(-1) and 3.0 ± 0.8 μm d(-1), respectively. The molecular weight and the mechanical properties of the residual films remained constant. Changing the ratio of Ty and Hva provided control over the glass transition temperature (T(g)) and the enzymatic surface erosion: increasing the Hva content in the polymers resulted in higher T(g) and lower enzymatic erosion rate. Polymers with more than 50 mol % Hva were stable at 37 °C in enzyme solution. Analysis on thin films using quartz crystal microbalance with dissipation (QCM-D) demonstrated that the onset temperature of the enzymatic erosion was approximately 20 °C lower than the wet T(g) for all tested polymers. This new finding demonstrates that relatively high tensile strength polycarbonates can undergo enzymatic surface erosion. Moreover, it also sheds light on the connection between T(g) and enzymatic degradation and explains why few of the high strength polymers follow an enzyme-meditated degradation pathway.

Current methods to characterize cell-biomaterial interactions are population-based and rely on imaging or biochemical analysis of end-point biological markers. The analysis of stem cells in cultures is further challenged by the heterogeneous nature and divergent fates of stem cells, especially in complex, engineered microenvironments. Here, we describe a high content imaging-based platform capable of identifying cell subpopulations based on cell phenotype-specific morphological descriptors. This method can be utilized to identify microenvironment-responsive morphological descriptors, which can be used to parse cells from a heterogeneous cell population based on emergent phenotypes at the single-cell level and has been successfully deployed to forecast long-term cell lineage fates and screen regenerative phenotype-prescriptive biomaterials.

Effective screening methodologies for cells are challenged by the divergent and heterogeneous nature of phenotypes inherent to stem cell cultures, particularly on engineered biomaterial surfaces. In this study, we showcase a high-content, confocal imaging-based methodology to parse single-cell phenotypes by quantifying organizational signatures of specific subcellular reporter proteins and applied this profiling approach to three human stem cell types (embryonic-human embryonic stem cell [hESC], induced pluripotent-induced pluripotent stem cell [iPSC], and mesenchymal-human mesenchymal stem cell [hMSC]). We demonstrate that this method could distinguish self-renewing subpopulations of hESCs and iPSCs from heterogeneous populations. This technique can also provide insights into how incremental changes in biomaterial properties, both physiochemical and mechanical, influence stem cell fates by parsing the organization of stem cell proteins. For example, hMSCs cultured on polymeric films with varying degrees of poly(ethylene glycol) to modulate osteogenic differentiation were parsed using high-content organization of the cytoskeletal protein F-actin. In addition, hMSCs cultured on a self-assembled monolayer platform featuring compositional gradients were screened and descriptors obtained to correlate substrate variations with adipogenic lineage commitment. Taken together, high-content imaging of structurally sensitive proteins can be used as a tool to identify stem cell phenotypes at the single-cell level across a diverse range of culture conditions and microenvironments.

Objective: To evaluate the ventilatory response to hypoxia and hypercapnia in healthy residents of Mexico City at 2240 m above sea level., Methods: 15 healthy subjects, 10 women and 5 men, were studied (mean age 38; range 26-76). All completed one or two tests of ventilatory response to hypoxia and hypercapnia as described by Rebuck-Campbell and Read, respectively. The results were analyzed by linear regression using the minute ventilation as the dependent variable and SaO2 (hypoxia) or PCO2 (hypercapnia) as the independent variables., Results: Seven subjects had very low or no response to hypoxia. The mean hypoxia slope was 0.7 +/- 0.6 L/min/% (+/- SD) and the hypercapnia slope was 3.0 +/- 1.4 L/min/mmHg. The intercepts were 176 +/- 278 for SaO2 and 3.0 +/- 7 for PCO2., Conclusions: A low respiratory response to hypoxia was found in Mexico City Healthy residents. The response to hypercapnia was similar in slope to other studies but had an intercept shifted to lower values. The Mexico City residents showed a behavior typical of patients with chronic hypoxemia or of dwellers at high altitudes.

Means of vascular access are fundamental in the management of cancer. However, since current intravenous devices for long-term treatment are expensive and necessitate a high degree of education among medical personnel, in developing countries they are impractical for use in most of the population. We describe the use of a nontunneled, low-cost, long-lasting Silastic catheter (LLSC), cared for by an intravenous therapy team (IVTT), in 462 patients with cancer. The rate of infectious complications was 0.66 infections per 1,000 catheter-days, which is as low as that reported in association with other catheters in developed countries. Neutropenia and skin and/or soft-tissue infections were significant risk factors associated with LLSC-related infections. We believe that use of this catheter may be an alternative for patients with cancer who need chemotherapy, as long as an IVTT is established for its care. Our experience could be useful for practitioners in countries with similar socioeconomic characteristics.